Commit eeb386ae authored by Tony Krowiak's avatar Tony Krowiak Committed by Alexander Gordeev

s390/vfio-ap: handle config changed and scan complete notification

This patch implements two new AP driver callbacks:

void (*on_config_changed)(struct ap_config_info *new_config_info,
                  struct ap_config_info *old_config_info);

void (*on_scan_complete)(struct ap_config_info *new_config_info,
                 struct ap_config_info *old_config_info);

The on_config_changed callback is invoked at the start of the AP bus scan
function when it determines that the host AP configuration information
has changed since the previous scan.

The vfio_ap device driver registers a callback function for this callback
that performs the following operations:

1. Unplugs the adapters, domains and control domains removed from the
host's AP configuration from the guests to which they are
assigned in a single operation.

2. Stores bitmaps identifying the adapters, domains and control domains
added to the host's AP configuration with the structure representing
the mediated device. When the vfio_ap device driver's probe callback is
subsequently invoked, the probe function will recognize that the
queue is being probed due to a change in the host's AP configuration
and the plugging of the queue into the guest will be bypassed.

The on_scan_complete callback is invoked after the ap bus scan is
completed if the host AP configuration data has changed. The vfio_ap
device driver registers a callback function for this callback that hot
plugs each queue and control domain added to the AP configuration for each
guest using them in a single hot plug operation.
Signed-off-by: default avatarTony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: default avatarJason J. Herne <jjherne@linux.ibm.com>
Signed-off-by: default avatarAlexander Gordeev <agordeev@linux.ibm.com>
parent f7f795c5
......@@ -47,6 +47,8 @@ static struct ap_driver vfio_ap_drv = {
.probe = vfio_ap_mdev_probe_queue,
.remove = vfio_ap_mdev_remove_queue,
.in_use = vfio_ap_mdev_resource_in_use,
.on_config_changed = vfio_ap_on_cfg_changed,
.on_scan_complete = vfio_ap_on_scan_complete,
.ids = ap_queue_ids,
};
......
......@@ -646,16 +646,11 @@ static bool vfio_ap_mdev_filter_cdoms(struct ap_matrix_mdev *matrix_mdev)
static bool vfio_ap_mdev_filter_matrix(unsigned long *apm, unsigned long *aqm,
struct ap_matrix_mdev *matrix_mdev)
{
int ret;
unsigned long apid, apqi, apqn;
DECLARE_BITMAP(prev_shadow_apm, AP_DEVICES);
DECLARE_BITMAP(prev_shadow_aqm, AP_DOMAINS);
struct vfio_ap_queue *q;
ret = ap_qci(&matrix_dev->info);
if (ret)
return false;
bitmap_copy(prev_shadow_apm, matrix_mdev->shadow_apcb.apm, AP_DEVICES);
bitmap_copy(prev_shadow_aqm, matrix_mdev->shadow_apcb.aqm, AP_DOMAINS);
vfio_ap_matrix_init(&matrix_dev->info, &matrix_mdev->shadow_apcb);
......@@ -1980,3 +1975,339 @@ int vfio_ap_mdev_resource_in_use(unsigned long *apm, unsigned long *aqm)
return ret;
}
/**
* vfio_ap_mdev_hot_unplug_cfg - hot unplug the adapters, domains and control
* domains that have been removed from the host's
* AP configuration from a guest.
*
* @matrix_mdev: an ap_matrix_mdev object attached to a KVM guest.
* @aprem: the adapters that have been removed from the host's AP configuration
* @aqrem: the domains that have been removed from the host's AP configuration
* @cdrem: the control domains that have been removed from the host's AP
* configuration.
*/
static void vfio_ap_mdev_hot_unplug_cfg(struct ap_matrix_mdev *matrix_mdev,
unsigned long *aprem,
unsigned long *aqrem,
unsigned long *cdrem)
{
int do_hotplug = 0;
if (!bitmap_empty(aprem, AP_DEVICES)) {
do_hotplug |= bitmap_andnot(matrix_mdev->shadow_apcb.apm,
matrix_mdev->shadow_apcb.apm,
aprem, AP_DEVICES);
}
if (!bitmap_empty(aqrem, AP_DOMAINS)) {
do_hotplug |= bitmap_andnot(matrix_mdev->shadow_apcb.aqm,
matrix_mdev->shadow_apcb.aqm,
aqrem, AP_DEVICES);
}
if (!bitmap_empty(cdrem, AP_DOMAINS))
do_hotplug |= bitmap_andnot(matrix_mdev->shadow_apcb.adm,
matrix_mdev->shadow_apcb.adm,
cdrem, AP_DOMAINS);
if (do_hotplug)
vfio_ap_mdev_update_guest_apcb(matrix_mdev);
}
/**
* vfio_ap_mdev_cfg_remove - determines which guests are using the adapters,
* domains and control domains that have been removed
* from the host AP configuration and unplugs them
* from those guests.
*
* @ap_remove: bitmap specifying which adapters have been removed from the host
* config.
* @aq_remove: bitmap specifying which domains have been removed from the host
* config.
* @cd_remove: bitmap specifying which control domains have been removed from
* the host config.
*/
static void vfio_ap_mdev_cfg_remove(unsigned long *ap_remove,
unsigned long *aq_remove,
unsigned long *cd_remove)
{
struct ap_matrix_mdev *matrix_mdev;
DECLARE_BITMAP(aprem, AP_DEVICES);
DECLARE_BITMAP(aqrem, AP_DOMAINS);
DECLARE_BITMAP(cdrem, AP_DOMAINS);
int do_remove = 0;
list_for_each_entry(matrix_mdev, &matrix_dev->mdev_list, node) {
mutex_lock(&matrix_mdev->kvm->lock);
mutex_lock(&matrix_dev->mdevs_lock);
do_remove |= bitmap_and(aprem, ap_remove,
matrix_mdev->matrix.apm,
AP_DEVICES);
do_remove |= bitmap_and(aqrem, aq_remove,
matrix_mdev->matrix.aqm,
AP_DOMAINS);
do_remove |= bitmap_andnot(cdrem, cd_remove,
matrix_mdev->matrix.adm,
AP_DOMAINS);
if (do_remove)
vfio_ap_mdev_hot_unplug_cfg(matrix_mdev, aprem, aqrem,
cdrem);
mutex_unlock(&matrix_dev->mdevs_lock);
mutex_unlock(&matrix_mdev->kvm->lock);
}
}
/**
* vfio_ap_mdev_on_cfg_remove - responds to the removal of adapters, domains and
* control domains from the host AP configuration
* by unplugging them from the guests that are
* using them.
* @cur_config_info: the current host AP configuration information
* @prev_config_info: the previous host AP configuration information
*/
static void vfio_ap_mdev_on_cfg_remove(struct ap_config_info *cur_config_info,
struct ap_config_info *prev_config_info)
{
int do_remove;
DECLARE_BITMAP(aprem, AP_DEVICES);
DECLARE_BITMAP(aqrem, AP_DOMAINS);
DECLARE_BITMAP(cdrem, AP_DOMAINS);
do_remove = bitmap_andnot(aprem,
(unsigned long *)prev_config_info->apm,
(unsigned long *)cur_config_info->apm,
AP_DEVICES);
do_remove |= bitmap_andnot(aqrem,
(unsigned long *)prev_config_info->aqm,
(unsigned long *)cur_config_info->aqm,
AP_DEVICES);
do_remove |= bitmap_andnot(cdrem,
(unsigned long *)prev_config_info->adm,
(unsigned long *)cur_config_info->adm,
AP_DEVICES);
if (do_remove)
vfio_ap_mdev_cfg_remove(aprem, aqrem, cdrem);
}
/**
* vfio_ap_filter_apid_by_qtype: filter APIDs from an AP mask for adapters that
* are older than AP type 10 (CEX4).
* @apm: a bitmap of the APIDs to examine
* @aqm: a bitmap of the APQIs of the queues to query for the AP type.
*/
static void vfio_ap_filter_apid_by_qtype(unsigned long *apm, unsigned long *aqm)
{
bool apid_cleared;
struct ap_queue_status status;
unsigned long apid, apqi, info;
int qtype, qtype_mask = 0xff000000;
for_each_set_bit_inv(apid, apm, AP_DEVICES) {
apid_cleared = false;
for_each_set_bit_inv(apqi, aqm, AP_DOMAINS) {
status = ap_test_queue(AP_MKQID(apid, apqi), 1, &info);
switch (status.response_code) {
/*
* According to the architecture in each case
* below, the queue's info should be filled.
*/
case AP_RESPONSE_NORMAL:
case AP_RESPONSE_RESET_IN_PROGRESS:
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
case AP_RESPONSE_BUSY:
qtype = info & qtype_mask;
/*
* The vfio_ap device driver only
* supports CEX4 and newer adapters, so
* remove the APID if the adapter is
* older than a CEX4.
*/
if (qtype < AP_DEVICE_TYPE_CEX4) {
clear_bit_inv(apid, apm);
apid_cleared = true;
}
break;
default:
/*
* If we don't know the adapter type,
* clear its APID since it can't be
* determined whether the vfio_ap
* device driver supports it.
*/
clear_bit_inv(apid, apm);
apid_cleared = true;
break;
}
/*
* If we've already cleared the APID from the apm, there
* is no need to continue examining the remainin AP
* queues to determine the type of the adapter.
*/
if (apid_cleared)
continue;
}
}
}
/**
* vfio_ap_mdev_cfg_add - store bitmaps specifying the adapters, domains and
* control domains that have been added to the host's
* AP configuration for each matrix mdev to which they
* are assigned.
*
* @apm_add: a bitmap specifying the adapters that have been added to the AP
* configuration.
* @aqm_add: a bitmap specifying the domains that have been added to the AP
* configuration.
* @adm_add: a bitmap specifying the control domains that have been added to the
* AP configuration.
*/
static void vfio_ap_mdev_cfg_add(unsigned long *apm_add, unsigned long *aqm_add,
unsigned long *adm_add)
{
struct ap_matrix_mdev *matrix_mdev;
if (list_empty(&matrix_dev->mdev_list))
return;
vfio_ap_filter_apid_by_qtype(apm_add, aqm_add);
list_for_each_entry(matrix_mdev, &matrix_dev->mdev_list, node) {
bitmap_and(matrix_mdev->apm_add,
matrix_mdev->matrix.apm, apm_add, AP_DEVICES);
bitmap_and(matrix_mdev->aqm_add,
matrix_mdev->matrix.aqm, aqm_add, AP_DOMAINS);
bitmap_and(matrix_mdev->adm_add,
matrix_mdev->matrix.adm, adm_add, AP_DEVICES);
}
}
/**
* vfio_ap_mdev_on_cfg_add - responds to the addition of adapters, domains and
* control domains to the host AP configuration
* by updating the bitmaps that specify what adapters,
* domains and control domains have been added so they
* can be hot plugged into the guest when the AP bus
* scan completes (see vfio_ap_on_scan_complete
* function).
* @cur_config_info: the current AP configuration information
* @prev_config_info: the previous AP configuration information
*/
static void vfio_ap_mdev_on_cfg_add(struct ap_config_info *cur_config_info,
struct ap_config_info *prev_config_info)
{
bool do_add;
DECLARE_BITMAP(apm_add, AP_DEVICES);
DECLARE_BITMAP(aqm_add, AP_DOMAINS);
DECLARE_BITMAP(adm_add, AP_DOMAINS);
do_add = bitmap_andnot(apm_add,
(unsigned long *)cur_config_info->apm,
(unsigned long *)prev_config_info->apm,
AP_DEVICES);
do_add |= bitmap_andnot(aqm_add,
(unsigned long *)cur_config_info->aqm,
(unsigned long *)prev_config_info->aqm,
AP_DOMAINS);
do_add |= bitmap_andnot(adm_add,
(unsigned long *)cur_config_info->adm,
(unsigned long *)prev_config_info->adm,
AP_DOMAINS);
if (do_add)
vfio_ap_mdev_cfg_add(apm_add, aqm_add, adm_add);
}
/**
* vfio_ap_on_cfg_changed - handles notification of changes to the host AP
* configuration.
*
* @cur_cfg_info: the current host AP configuration
* @prev_cfg_info: the previous host AP configuration
*/
void vfio_ap_on_cfg_changed(struct ap_config_info *cur_cfg_info,
struct ap_config_info *prev_cfg_info)
{
if (!cur_cfg_info || !prev_cfg_info)
return;
mutex_lock(&matrix_dev->guests_lock);
vfio_ap_mdev_on_cfg_remove(cur_cfg_info, prev_cfg_info);
vfio_ap_mdev_on_cfg_add(cur_cfg_info, prev_cfg_info);
memcpy(&matrix_dev->info, cur_cfg_info, sizeof(*cur_cfg_info));
mutex_unlock(&matrix_dev->guests_lock);
}
static void vfio_ap_mdev_hot_plug_cfg(struct ap_matrix_mdev *matrix_mdev)
{
bool do_hotplug = false;
int filter_domains = 0;
int filter_adapters = 0;
DECLARE_BITMAP(apm, AP_DEVICES);
DECLARE_BITMAP(aqm, AP_DOMAINS);
mutex_lock(&matrix_mdev->kvm->lock);
mutex_lock(&matrix_dev->mdevs_lock);
filter_adapters = bitmap_and(apm, matrix_mdev->matrix.apm,
matrix_mdev->apm_add, AP_DEVICES);
filter_domains = bitmap_and(aqm, matrix_mdev->matrix.aqm,
matrix_mdev->aqm_add, AP_DOMAINS);
if (filter_adapters && filter_domains)
do_hotplug |= vfio_ap_mdev_filter_matrix(apm, aqm, matrix_mdev);
else if (filter_adapters)
do_hotplug |=
vfio_ap_mdev_filter_matrix(apm,
matrix_mdev->shadow_apcb.aqm,
matrix_mdev);
else
do_hotplug |=
vfio_ap_mdev_filter_matrix(matrix_mdev->shadow_apcb.apm,
aqm, matrix_mdev);
if (bitmap_intersects(matrix_mdev->matrix.adm, matrix_mdev->adm_add,
AP_DOMAINS))
do_hotplug |= vfio_ap_mdev_filter_cdoms(matrix_mdev);
if (do_hotplug)
vfio_ap_mdev_update_guest_apcb(matrix_mdev);
mutex_unlock(&matrix_dev->mdevs_lock);
mutex_unlock(&matrix_mdev->kvm->lock);
}
void vfio_ap_on_scan_complete(struct ap_config_info *new_config_info,
struct ap_config_info *old_config_info)
{
struct ap_matrix_mdev *matrix_mdev;
mutex_lock(&matrix_dev->guests_lock);
list_for_each_entry(matrix_mdev, &matrix_dev->mdev_list, node) {
if (bitmap_empty(matrix_mdev->apm_add, AP_DEVICES) &&
bitmap_empty(matrix_mdev->aqm_add, AP_DOMAINS) &&
bitmap_empty(matrix_mdev->adm_add, AP_DOMAINS))
continue;
vfio_ap_mdev_hot_plug_cfg(matrix_mdev);
bitmap_clear(matrix_mdev->apm_add, 0, AP_DEVICES);
bitmap_clear(matrix_mdev->aqm_add, 0, AP_DOMAINS);
bitmap_clear(matrix_mdev->adm_add, 0, AP_DOMAINS);
}
mutex_unlock(&matrix_dev->guests_lock);
}
......@@ -105,6 +105,10 @@ struct ap_queue_table {
* PQAP(AQIC) instruction.
* @mdev: the mediated device
* @qtable: table of queues (struct vfio_ap_queue) assigned to the mdev
* @apm_add: bitmap of APIDs added to the host's AP configuration
* @aqm_add: bitmap of APQIs added to the host's AP configuration
* @adm_add: bitmap of control domain numbers added to the host's AP
* configuration
*/
struct ap_matrix_mdev {
struct vfio_device vdev;
......@@ -116,6 +120,9 @@ struct ap_matrix_mdev {
crypto_hook pqap_hook;
struct mdev_device *mdev;
struct ap_queue_table qtable;
DECLARE_BITMAP(apm_add, AP_DEVICES);
DECLARE_BITMAP(aqm_add, AP_DOMAINS);
DECLARE_BITMAP(adm_add, AP_DOMAINS);
};
/**
......@@ -146,4 +153,9 @@ void vfio_ap_mdev_remove_queue(struct ap_device *queue);
int vfio_ap_mdev_resource_in_use(unsigned long *apm, unsigned long *aqm);
void vfio_ap_on_cfg_changed(struct ap_config_info *new_config_info,
struct ap_config_info *old_config_info);
void vfio_ap_on_scan_complete(struct ap_config_info *new_config_info,
struct ap_config_info *old_config_info);
#endif /* _VFIO_AP_PRIVATE_H_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment