Merge branch 'master' into upstream-fixes

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 18
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME=Crazed Snow-Weasel
 
 # *DOCUMENTATION*

arch/i386/kernel/Makefile

@@ -39,7 +39,6 @@ obj-$(CONFIG_VM86)		+= vm86.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_HPET_TIMER) 	+= hpet.o
 obj-$(CONFIG_K8_NB)		+= k8.o
-obj-$(CONFIG_AUDIT)		+= audit.o
 
 EXTRA_AFLAGS   := -traditional
 

arch/ia64/Kconfig

@@ -75,6 +75,10 @@ config DMA_IS_NORMAL
 	depends on IA64_SGI_SN2
 	default y
 
+config AUDIT_ARCH
+	bool
+	default y
+
 choice
 	prompt "System type"
 	default IA64_GENERIC

arch/powerpc/Kconfig

@@ -95,6 +95,10 @@ config GENERIC_TBSYNC
 	default y if PPC32 && SMP
 	default n
 
+config AUDIT_ARCH
+	bool
+	default y
+
 config DEFAULT_UIMAGE
 	bool
 	help

arch/s390/Kconfig

@@ -118,6 +118,10 @@ config SYSVIPC_COMPAT
 	depends on COMPAT && SYSVIPC
 	default y
 
+config AUDIT_ARCH
+	bool
+	default y
+
 comment "Code generation options"
 
 choice

arch/sh64/Makefile

@@ -26,7 +26,6 @@ LDFLAGS			+= -EB  -mshelf32_linux
 endif
 
 # No requirements for endianess support from AFLAGS, 'as' always run through gcc
-AFLAGS		+= -m5 -isa=sh64 -traditional
 CFLAGS		+= $(cpu-y)
 
 LDFLAGS_vmlinux	+= --defsym phys_stext=_stext-$(CONFIG_CACHED_MEMORY_OFFSET) \

arch/sh64/kernel/process.c

@@ -355,6 +355,9 @@ void machine_power_off(void)
 	enter_deep_standby();
 }
 
+void (*pm_power_off)(void) = machine_power_off;
+EXPORT_SYMBOL(pm_power_off);
+
 void show_regs(struct pt_regs * regs)
 {
 	unsigned long long ah, al, bh, bl, ch, cl;

arch/sh64/mach-cayman/setup.c

@@ -112,8 +112,10 @@ struct resource io_resources[] = {
 };
 
 struct resource kram_resources[] = {
-	{ "Kernel code", 0, 0 },	/* These must be last in the array */
-	{ "Kernel data", 0, 0 }		/* These must be last in the array */
+	/* These must be last in the array */
+	{ .name = "Kernel code", .start = 0, .end = 0 },
+	/* These must be last in the array */
+	{ .name = "Kernel data", .start = 0, .end = 0 }
 };
 
 struct resource xram_resources[] = {

arch/sh64/mm/ioremap.c

@@ -449,7 +449,9 @@ ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof,
 		if (p + 32 >= e)        /* Better than nothing */
 			break;
 		if ((nm = r->name) == 0) nm = "???";
-		p += sprintf(p, "%08lx-%08lx: %s\n", r->start, r->end, nm);
+		p += sprintf(p, "%08lx-%08lx: %s\n",
+			     (unsigned long)r->start,
+			     (unsigned long)r->end, nm);
 	}
 
 	return p-buf;

arch/sparc64/Kconfig

@@ -34,6 +34,10 @@ config ARCH_MAY_HAVE_PC_FDC
 	bool
 	default y
 
+config AUDIT_ARCH
+	bool
+	default y
+
 choice
 	prompt "Kernel page size"
 	default SPARC64_PAGE_SIZE_8KB

arch/sparc64/kernel/Makefile

@@ -25,6 +25,9 @@ obj-$(CONFIG_MODULES) += module.o
 obj-$(CONFIG_US3_FREQ) += us3_cpufreq.o
 obj-$(CONFIG_US2E_FREQ) += us2e_cpufreq.o
 obj-$(CONFIG_KPROBES) += kprobes.o
+obj-$(CONFIG_AUDIT) += audit.o
+obj-$(CONFIG_AUDIT)$(CONFIG_SPARC32_COMPAT) += compat_audit.o
+obj-y += $(obj-yy)
 
 ifdef CONFIG_SUNOS_EMUL
   obj-y += sys_sunos32.o sunos_ioctl32.o

arch/sparc64/kernel/audit.c

+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_SPARC32_COMPAT
+	extern int sparc32_classify_syscall(unsigned);
+	if (abi == AUDIT_ARCH_SPARC)
+		return sparc32_classify_syscall(syscall);
+#endif
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_socketcall:
+		return 4;
+	case __NR_execve:
+		return 5;
+	default:
+		return 0;
+	}
+}
+
+static int __init audit_classes_init(void)
+{
+#ifdef CONFIG_SPARC32_COMPAT
+	extern __u32 sparc32_dir_class[];
+	extern __u32 sparc32_write_class[];
+	extern __u32 sparc32_read_class[];
+	extern __u32 sparc32_chattr_class[];
+	audit_register_class(AUDIT_CLASS_WRITE_32, sparc32_write_class);
+	audit_register_class(AUDIT_CLASS_READ_32, sparc32_read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, sparc32_dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR_32, sparc32_chattr_class);
+#endif
+	audit_register_class(AUDIT_CLASS_WRITE, write_class);
+	audit_register_class(AUDIT_CLASS_READ, read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+	return 0;
+}
+
+__initcall(audit_classes_init);

arch/sparc64/kernel/compat_audit.c

+#include <asm-sparc/unistd.h>
+
+unsigned sparc32_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned sparc32_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+unsigned sparc32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned sparc32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+int sparc32_classify_syscall(unsigned syscall)
+{
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_socketcall:
+		return 4;
+	case __NR_execve:
+		return 5;
+	default:
+		return 1;
+	}
+}

arch/x86_64/Kconfig

@@ -85,6 +85,10 @@ config DMI
 	bool
 	default y
 
+config AUDIT_ARCH
+	bool
+	default y
+
 source "init/Kconfig"
 
 

drivers/media/Kconfig

@@ -53,7 +53,7 @@ config VIDEO_V4L1_COMPAT
 	  If you are unsure as to whether this is required, answer Y.
 
 config VIDEO_V4L2
-	tristate
+	bool
 	default y
 
 source "drivers/media/video/Kconfig"

drivers/media/common/saa7146_video.c

@@ -1190,6 +1190,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
 		}
 		return err;
 	}
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 	case VIDIOCGMBUF:
 	{
 		struct video_mbuf *mbuf = arg;
@@ -1218,6 +1219,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int
 		mutex_unlock(&q->lock);
 		return 0;
 	}
+#endif
 	default:
 		return v4l_compat_translate_ioctl(inode,file,cmd,arg,
 						  saa7146_video_do_ioctl);

drivers/media/dvb/b2c2/Kconfig

 config DVB_B2C2_FLEXCOP
 	tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters"
 	depends on DVB_CORE && I2C
+	select DVB_PLL
 	select DVB_STV0299
 	select DVB_MT352
 	select DVB_MT312

drivers/media/dvb/bt8xx/Kconfig

 config DVB_BT8XX
 	tristate "BT8xx based PCI cards"
 	depends on DVB_CORE && PCI && I2C && VIDEO_BT848
+	select DVB_PLL
 	select DVB_MT352
 	select DVB_SP887X
 	select DVB_NXT6000

drivers/media/dvb/dvb-usb/Kconfig

@@ -2,6 +2,7 @@ config DVB_USB
 	tristate "Support for various USB DVB devices"
 	depends on DVB_CORE && USB && I2C
 	select FW_LOADER
+	select DVB_PLL
 	help
 	  By enabling this you will be able to choose the various supported
 	  USB1.1 and USB2.0 DVB devices.

drivers/media/dvb/frontends/Kconfig

@@ -6,43 +6,43 @@ comment "DVB-S (satellite) frontends"
 
 config DVB_STV0299
 	tristate "ST STV0299 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_CX24110
 	tristate "Conexant CX24110 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_CX24123
 	tristate "Conexant CX24123 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_TDA8083
 	tristate "Philips TDA8083 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_MT312
 	tristate "Zarlink VP310/MT312 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_VES1X93
 	tristate "VLSI VES1893 or VES1993 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
 config DVB_S5H1420
 	tristate "Samsung S5H1420 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-S tuner module. Say Y when you want to support this frontend.
 
@@ -51,7 +51,7 @@ comment "DVB-T (terrestrial) frontends"
 
 config DVB_SP8870
 	tristate "Spase sp8870 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
@@ -63,7 +63,7 @@ config DVB_SP8870
 
 config DVB_SP887X
 	tristate "Spase sp887x based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
@@ -75,25 +75,25 @@ config DVB_SP887X
 
 config DVB_CX22700
 	tristate "Conexant CX22700 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_CX22702
 	tristate "Conexant cx22702 demodulator (OFDM)"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_L64781
 	tristate "LSI L64781"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_TDA1004X
 	tristate "Philips TDA10045H/TDA10046H based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	select FW_LOADER
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
@@ -106,32 +106,32 @@ config DVB_TDA1004X
 
 config DVB_NXT6000
 	tristate "NxtWave Communications NXT6000 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_MT352
 	tristate "Zarlink MT352 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_ZL10353
 	tristate "Zarlink ZL10353 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-T tuner module. Say Y when you want to support this frontend.
 
 config DVB_DIB3000MB
 	tristate "DiBcom 3000M-B"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
 	  to support this frontend.
 
 config DVB_DIB3000MC
 	tristate "DiBcom 3000P/M-C"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-T tuner module. Designed for mobile usage. Say Y when you want
 	  to support this frontend.
@@ -141,19 +141,19 @@ comment "DVB-C (cable) frontends"
 
 config DVB_VES1820
 	tristate "VLSI VES1820 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-C tuner module. Say Y when you want to support this frontend.
 
 config DVB_TDA10021
 	tristate "Philips TDA10021 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-C tuner module. Say Y when you want to support this frontend.
 
 config DVB_STV0297
 	tristate "ST STV0297 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  A DVB-C tuner module. Say Y when you want to support this frontend.
 
@@ -162,7 +162,7 @@ comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends"
 
 config DVB_NXT200X
 	tristate "NxtWave Communications NXT2002/NXT2004 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	select FW_LOADER
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
@@ -176,7 +176,7 @@ config DVB_NXT200X
 
 config DVB_OR51211
 	tristate "Oren OR51211 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	select FW_LOADER
 	help
 	  An ATSC 8VSB tuner module. Say Y when you want to support this frontend.
@@ -188,7 +188,7 @@ config DVB_OR51211
 
 config DVB_OR51132
 	tristate "Oren OR51132 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	select FW_LOADER
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
@@ -203,7 +203,7 @@ config DVB_OR51132
 
 config DVB_BCM3510
 	tristate "Broadcom BCM3510"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	select FW_LOADER
 	help
 	  An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to
@@ -211,7 +211,7 @@ config DVB_BCM3510
 
 config DVB_LGDT330X
 	tristate "LG Electronics LGDT3302/LGDT3303 based"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want
 	  to support this frontend.
@@ -220,15 +220,19 @@ config DVB_LGDT330X
 comment "Miscellaneous devices"
 	depends on DVB_CORE
 
+config DVB_PLL
+	tristate
+	depends on DVB_CORE && I2C
+
 config DVB_LNBP21
 	tristate "LNBP21 SEC controller"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  An SEC control chip.
 
 config DVB_ISL6421
 	tristate "ISL6421 SEC controller"
-	depends on DVB_CORE
+	depends on DVB_CORE && I2C
 	help
 	  An SEC control chip.
 

drivers/media/dvb/frontends/Makefile

@@ -4,7 +4,7 @@
 
 EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/
 
-obj-$(CONFIG_DVB_CORE) += dvb-pll.o
+obj-$(CONFIG_DVB_PLL) += dvb-pll.o
 obj-$(CONFIG_DVB_STV0299) += stv0299.o
 obj-$(CONFIG_DVB_SP8870) += sp8870.o
 obj-$(CONFIG_DVB_CX22700) += cx22700.o

drivers/media/dvb/pluto2/Kconfig

@@ -2,6 +2,7 @@ config DVB_PLUTO2
 	tristate "Pluto2 cards"
 	depends on DVB_CORE && PCI && I2C
 	select I2C_ALGOBIT
+	select DVB_PLL
 	select DVB_TDA1004X
 	help
 	  Support for PCI cards based on the Pluto2 FPGA like the Satelco

drivers/media/dvb/ttpci/Kconfig

@@ -3,6 +3,7 @@ config DVB_AV7110
 	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select FW_LOADER
 	select VIDEO_SAA7146_VV
+	select DVB_PLL
 	select DVB_VES1820
 	select DVB_VES1X93
 	select DVB_STV0299
@@ -61,6 +62,7 @@ config DVB_BUDGET
 	tristate "Budget cards"
 	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select VIDEO_SAA7146
+	select DVB_PLL
 	select DVB_STV0299
 	select DVB_VES1X93
 	select DVB_VES1820
@@ -83,6 +85,7 @@ config DVB_BUDGET_CI
 	tristate "Budget cards with onboard CI connector"
 	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select VIDEO_SAA7146
+	select DVB_PLL
 	select DVB_STV0297
 	select DVB_STV0299
 	select DVB_TDA1004X
@@ -104,6 +107,7 @@ config DVB_BUDGET_AV
 	tristate "Budget cards with analog video inputs"
 	depends on DVB_CORE && PCI && I2C && VIDEO_V4L1
 	select VIDEO_SAA7146_VV
+	select DVB_PLL
 	select DVB_STV0299
 	select DVB_TDA1004X
 	select DVB_TDA10021
@@ -122,6 +126,7 @@ config DVB_BUDGET_PATCH
 	tristate "AV7110 cards with Budget Patch"
 	depends on DVB_CORE && DVB_BUDGET && VIDEO_V4L1
 	select DVB_AV7110
+	select DVB_PLL
 	select DVB_STV0299
 	select DVB_VES1X93
 	select DVB_TDA8083

drivers/media/dvb/ttusb-budget/Kconfig

 config DVB_TTUSB_BUDGET
 	tristate "Technotrend/Hauppauge Nova-USB devices"
-	depends on DVB_CORE && USB
+	depends on DVB_CORE && USB && I2C
+	select DVB_PLL
 	select DVB_CX22700
 	select DVB_TDA1004X
 	select DVB_VES1820

drivers/media/video/Kconfig

@@ -260,7 +260,7 @@ source "drivers/media/video/saa7134/Kconfig"
 
 config VIDEO_MXB
 	tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
-	depends on PCI && VIDEO_V4L1
+	depends on PCI && VIDEO_V4L1 && I2C
 	select VIDEO_SAA7146_VV
 	select VIDEO_TUNER
 	---help---
@@ -272,7 +272,7 @@ config VIDEO_MXB
 
 config VIDEO_DPC
 	tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
-	depends on PCI && VIDEO_V4L1
+	depends on PCI && VIDEO_V4L1 && I2C
 	select VIDEO_SAA7146_VV
 	select VIDEO_V4L2
 	---help---
@@ -287,7 +287,7 @@ config VIDEO_DPC
 
 config VIDEO_HEXIUM_ORION
 	tristate "Hexium HV-PCI6 and Orion frame grabber"
-	depends on PCI && VIDEO_V4L1
+	depends on PCI && VIDEO_V4L1 && I2C
 	select VIDEO_SAA7146_VV
 	select VIDEO_V4L2
 	---help---
@@ -299,7 +299,7 @@ config VIDEO_HEXIUM_ORION
 
 config VIDEO_HEXIUM_GEMINI
 	tristate "Hexium Gemini frame grabber"
-	depends on PCI && VIDEO_V4L1
+	depends on PCI && VIDEO_V4L1 && I2C
 	select VIDEO_SAA7146_VV
 	select VIDEO_V4L2
 	---help---

drivers/media/video/bt8xx/bttv-input.c

@@ -303,6 +303,7 @@ int bttv_input_init(struct bttv *btv)
 		ir->mask_keyup   = 0x010000;
 		ir->polling      = 50; // ms
 		break;
+	case BTTV_BOARD_PV_M4900:
 	case BTTV_BOARD_PV_BT878P_9B:
 	case BTTV_BOARD_PV_BT878P_PLUS:
 		ir_codes         = ir_codes_pixelview;

drivers/media/video/cx88/Kconfig

@@ -51,6 +51,7 @@ config VIDEO_CX88_DVB
 	tristate "DVB/ATSC Support for cx2388x based TV cards"
 	depends on VIDEO_CX88 && DVB_CORE
 	select VIDEO_BUF_DVB
+	select DVB_PLL
 	---help---
 	  This adds support for DVB/ATSC cards based on the
 	  Conexant 2388x chip.

drivers/media/video/saa7134/Kconfig

@@ -40,6 +40,7 @@ config VIDEO_SAA7134_DVB
 	depends on VIDEO_SAA7134 && DVB_CORE
 	select VIDEO_BUF_DVB
 	select FW_LOADER
+	select DVB_PLL
 	---help---
 	  This adds support for DVB cards based on the
 	  Philips saa7134 chip.

drivers/media/video/tuner-types.c

@@ -926,11 +926,17 @@ static struct tuner_params tuner_lg_tdvs_h06xf_params[] = {
 
 /* ------------ TUNER_YMEC_TVF66T5_B_DFF - Philips PAL ------------ */
 
+static struct tuner_range tuner_ymec_tvf66t5_b_dff_pal_ranges[] = {
+	{ 16 * 160.25 /*MHz*/, 0x8e, 0x01, },
+	{ 16 * 464.25 /*MHz*/, 0x8e, 0x02, },
+	{ 16 * 999.99        , 0x8e, 0x08, },
+};
+
 static struct tuner_params tuner_ymec_tvf66t5_b_dff_params[] = {
 	{
 		.type   = TUNER_PARAM_TYPE_PAL,
-		.ranges = tuner_tena_9533_di_pal_ranges,
-		.count  = ARRAY_SIZE(tuner_tena_9533_di_pal_ranges),
+		.ranges = tuner_ymec_tvf66t5_b_dff_pal_ranges,
+		.count  = ARRAY_SIZE(tuner_ymec_tvf66t5_b_dff_pal_ranges),
 	},
 };
 

drivers/media/video/zoran.h

@@ -267,7 +267,7 @@ struct zoran_v4l_settings {
 };
 
 /* whoops, this one is undeclared if !v4l2 */
-#ifndef HAVE_V4L2
+#ifndef CONFIG_VIDEO_V4L2
 struct v4l2_jpegcompression {
 	int quality;
 	int APPn;

drivers/media/video/zoran_driver.c

@@ -86,7 +86,7 @@
 #include "zoran_device.h"
 #include "zoran_card.h"
 
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 	/* we declare some card type definitions here, they mean
 	 * the same as the v4l1 ZORAN_VID_TYPE above, except it's v4l2 */
 #define ZORAN_V4L2_VID_FLAGS ( \
@@ -103,7 +103,7 @@ const struct zoran_format zoran_formats[] = {
 	{
 		.name = "15-bit RGB",
 		.palette = VIDEO_PALETTE_RGB555,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 #ifdef __LITTLE_ENDIAN
 		.fourcc = V4L2_PIX_FMT_RGB555,
 #else
@@ -117,7 +117,7 @@ const struct zoran_format zoran_formats[] = {
 	}, {
 		.name = "16-bit RGB",
 		.palette = VIDEO_PALETTE_RGB565,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 #ifdef __LITTLE_ENDIAN
 		.fourcc = V4L2_PIX_FMT_RGB565,
 #else
@@ -131,7 +131,7 @@ const struct zoran_format zoran_formats[] = {
 	}, {
 		.name = "24-bit RGB",
 		.palette = VIDEO_PALETTE_RGB24,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 #ifdef __LITTLE_ENDIAN
 		.fourcc = V4L2_PIX_FMT_BGR24,
 #else
@@ -145,7 +145,7 @@ const struct zoran_format zoran_formats[] = {
 	}, {
 		.name = "32-bit RGB",
 		.palette = VIDEO_PALETTE_RGB32,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 #ifdef __LITTLE_ENDIAN
 		.fourcc = V4L2_PIX_FMT_BGR32,
 #else
@@ -159,7 +159,7 @@ const struct zoran_format zoran_formats[] = {
 	}, {
 		.name = "4:2:2, packed, YUYV",
 		.palette = VIDEO_PALETTE_YUV422,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 		.fourcc = V4L2_PIX_FMT_YUYV,
 		.colorspace = V4L2_COLORSPACE_SMPTE170M,
 #endif
@@ -169,7 +169,7 @@ const struct zoran_format zoran_formats[] = {
 	}, {
 		.name = "Hardware-encoded Motion-JPEG",
 		.palette = -1,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 		.fourcc = V4L2_PIX_FMT_MJPEG,
 		.colorspace = V4L2_COLORSPACE_SMPTE170M,
 #endif
@@ -210,7 +210,7 @@ static int lock_norm = 0;	/* 1=Don't change TV standard (norm) */
 module_param(lock_norm, int, 0);
 MODULE_PARM_DESC(lock_norm, "Users can't change norm");
 
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 	/* small helper function for calculating buffersizes for v4l2
 	 * we calculate the nearest higher power-of-two, which
 	 * will be the recommended buffersize */
@@ -1761,7 +1761,7 @@ setup_overlay (struct file *file,
 	return wait_grab_pending(zr);
 }
 
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 	/* get the status of a buffer in the clients buffer queue */
 static int
 zoran_v4l2_buffer_status (struct file        *file,
@@ -2676,7 +2676,7 @@ zoran_do_ioctl (struct inode *inode,
 	}
 		break;
 
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 
 		/* The new video4linux2 capture interface - much nicer than video4linux1, since
 		 * it allows for integrating the JPEG capturing calls inside standard v4l2
@@ -4689,7 +4689,7 @@ static struct file_operations zoran_fops = {
 struct video_device zoran_template __devinitdata = {
 	.name = ZORAN_NAME,
 	.type = ZORAN_VID_TYPE,
-#ifdef HAVE_V4L2
+#ifdef CONFIG_VIDEO_V4L2
 	.type2 = ZORAN_V4L2_VID_FLAGS,
 #endif
 	.hardware = ZORAN_HARDWARE,

drivers/serial/sh-sci.c

@@ -1579,7 +1579,7 @@ static int __init serial_console_setup(struct console *co, char *options)
 	h8300_sci_enable(port, sci_enable);
 #endif
 #elif defined(CONFIG_SUPERH64)
-	port->uartclk = current_cpu_info.module_clock * 16;
+	port->uartclk = current_cpu_data.module_clock * 16;
 #else
 	{
 		struct clk *clk = clk_get("module_clk");
@@ -1720,7 +1720,7 @@ static int __init sci_init(void)
 #if defined(__H8300H__) || defined(__H8300S__)
 			sciport->port.uartclk = CONFIG_CPU_CLOCK;
 #elif defined(CONFIG_SUPERH64)
-			sciport->port.uartclk = current_cpu_info.module_clock * 16;
+			sciport->port.uartclk = current_cpu_data.module_clock * 16;
 #else
 			struct clk *clk = clk_get("module_clk");
 			sciport->port.uartclk = clk_get_rate(clk) * 16;

drivers/usb/input/yealink.c

@@ -810,12 +810,9 @@ static int usb_cleanup(struct yealink_dev *yld, int err)
 	if (yld == NULL)
 		return err;
 
-        if (yld->urb_irq) {
-		usb_kill_urb(yld->urb_irq);
-		usb_free_urb(yld->urb_irq);
-	}
-        if (yld->urb_ctl)
-		usb_free_urb(yld->urb_ctl);
+	usb_kill_urb(yld->urb_irq);	/* parameter validation in core/urb */
+	usb_kill_urb(yld->urb_ctl);	/* parameter validation in core/urb */
+
         if (yld->idev) {
 		if (err)
 			input_free_device(yld->idev);
@@ -831,6 +828,9 @@ static int usb_cleanup(struct yealink_dev *yld, int err)
 	if (yld->irq_data)
 		usb_buffer_free(yld->udev, USB_PKT_LEN,
 				yld->irq_data, yld->irq_dma);
+
+	usb_free_urb(yld->urb_irq);	/* parameter validation in core/urb */
+	usb_free_urb(yld->urb_ctl);	/* parameter validation in core/urb */
 	kfree(yld);
 	return err;
 }

drivers/usb/serial/usb-serial.c

@@ -464,8 +464,10 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int
 		length += sprintf (page+length, " path:%s", tmp);
 			
 		length += sprintf (page+length, "\n");
-		if ((length + begin) > (off + count))
+		if ((length + begin) > (off + count)) {
+			usb_serial_put(serial);
 			goto done;
+		}
 		if ((length + begin) < off) {
 			begin += length;
 			length = 0;

fs/cifs/readdir.c

@@ -82,7 +82,6 @@ static int construct_dentry(struct qstr *qstring, struct file *file,
 			if(*ptmp_inode == NULL)
 				return rc;
 			rc = 1;
-			d_instantiate(tmp_dentry, *ptmp_inode);
 		}
 	} else {
 		tmp_dentry = d_alloc(file->f_dentry, qstring);
@@ -99,9 +98,7 @@ static int construct_dentry(struct qstr *qstring, struct file *file,
 			tmp_dentry->d_op = &cifs_dentry_ops;
 		if(*ptmp_inode == NULL)
 			return rc;
-		rc = 1;
-		d_instantiate(tmp_dentry, *ptmp_inode);
-		d_rehash(tmp_dentry);
+		rc = 2;
 	}
 
 	tmp_dentry->d_time = jiffies;
@@ -870,6 +867,12 @@ static int cifs_filldir(char *pfindEntry, struct file *file,
 				pfindEntry, &obj_type, rc);
 	else
 		fill_in_inode(tmp_inode, 1 /* NT */, pfindEntry, &obj_type, rc);
+
+	if(rc) /* new inode - needs to be tied to dentry */ {
+		d_instantiate(tmp_dentry, tmp_inode);
+		if(rc == 2)
+			d_rehash(tmp_dentry);
+	}
 	
 	
 	rc = filldir(direntry,qstring.name,qstring.len,file->f_pos,

fs/xfs/linux-2.6/xfs_aops.c

@@ -1390,11 +1390,19 @@ xfs_vm_direct_IO(
 
 	iocb->private = xfs_alloc_ioend(inode, IOMAP_UNWRITTEN);
 
-	ret = blockdev_direct_IO_own_locking(rw, iocb, inode,
-		iomap.iomap_target->bt_bdev,
-		iov, offset, nr_segs,
-		xfs_get_blocks_direct,
-		xfs_end_io_direct);
+	if (rw == WRITE) {
+		ret = blockdev_direct_IO_own_locking(rw, iocb, inode,
+			iomap.iomap_target->bt_bdev,
+			iov, offset, nr_segs,
+			xfs_get_blocks_direct,
+			xfs_end_io_direct);
+	} else {
+		ret = blockdev_direct_IO_no_locking(rw, iocb, inode,
+			iomap.iomap_target->bt_bdev,
+			iov, offset, nr_segs,
+			xfs_get_blocks_direct,
+			xfs_end_io_direct);
+	}
 
 	if (unlikely(ret <= 0 && iocb->private))
 		xfs_destroy_ioend(iocb->private);

fs/xfs/linux-2.6/xfs_lrw.c

@@ -264,7 +264,9 @@ xfs_read(
 					dmflags, &locktype);
 		if (ret) {
 			xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-			goto unlock_mutex;
+			if (unlikely(ioflags & IO_ISDIRECT))
+				mutex_unlock(&inode->i_mutex);
+			return ret;
 		}
 	}
 
@@ -272,6 +274,9 @@ xfs_read(
 		bhv_vop_flushinval_pages(vp, ctooff(offtoct(*offset)),
 						-1, FI_REMAPF_LOCKED);
 
+	if (unlikely(ioflags & IO_ISDIRECT))
+		mutex_unlock(&inode->i_mutex);
+
 	xfs_rw_enter_trace(XFS_READ_ENTER, &ip->i_iocore,
 				(void *)iovp, segs, *offset, ioflags);
 	ret = __generic_file_aio_read(iocb, iovp, segs, offset);
@@ -281,10 +286,6 @@ xfs_read(
 		XFS_STATS_ADD(xs_read_bytes, ret);
 
 	xfs_iunlock(ip, XFS_IOLOCK_SHARED);
-
-unlock_mutex:
-	if (unlikely(ioflags & IO_ISDIRECT))
-		mutex_unlock(&inode->i_mutex);
 	return ret;
 }
 
@@ -390,6 +391,8 @@ xfs_splice_write(
 	xfs_inode_t		*ip = XFS_BHVTOI(bdp);
 	xfs_mount_t		*mp = ip->i_mount;
 	ssize_t			ret;
+	struct inode		*inode = outfilp->f_mapping->host;
+	xfs_fsize_t		isize;
 
 	XFS_STATS_INC(xs_write_calls);
 	if (XFS_FORCED_SHUTDOWN(ip->i_mount))
@@ -416,6 +419,20 @@ xfs_splice_write(
 	if (ret > 0)
 		XFS_STATS_ADD(xs_write_bytes, ret);
 
+	isize = i_size_read(inode);
+	if (unlikely(ret < 0 && ret != -EFAULT && *ppos > isize))
+		*ppos = isize;
+
+	if (*ppos > ip->i_d.di_size) {
+		xfs_ilock(ip, XFS_ILOCK_EXCL);
+		if (*ppos > ip->i_d.di_size) {
+			ip->i_d.di_size = *ppos;
+			i_size_write(inode, *ppos);
+			ip->i_update_core = 1;
+			ip->i_update_size = 1;
+		}
+		xfs_iunlock(ip, XFS_ILOCK_EXCL);
+	}
 	xfs_iunlock(ip, XFS_IOLOCK_EXCL);
 	return ret;
 }

fs/xfs/quota/xfs_qm_bhv.c

@@ -203,7 +203,7 @@ xfs_qm_statvfs(
 	if (error || !vnode)
 		return error;
 
-	mp = XFS_BHVTOM(bhv);
+	mp = xfs_vfstom(bhvtovfs(bhv));
 	ip = xfs_vtoi(vnode);
 
 	if (!(ip->i_d.di_flags & XFS_DIFLAG_PROJINHERIT))

fs/xfs/xfs_alloc.h

@@ -43,6 +43,26 @@ typedef enum xfs_alloctype
 #define	XFS_ALLOC_FLAG_TRYLOCK	0x00000001  /* use trylock for buffer locking */
 #define	XFS_ALLOC_FLAG_FREEING	0x00000002  /* indicate caller is freeing extents*/
 
+/*
+ * In order to avoid ENOSPC-related deadlock caused by
+ * out-of-order locking of AGF buffer (PV 947395), we place
+ * constraints on the relationship among actual allocations for
+ * data blocks, freelist blocks, and potential file data bmap
+ * btree blocks. However, these restrictions may result in no
+ * actual space allocated for a delayed extent, for example, a data
+ * block in a certain AG is allocated but there is no additional
+ * block for the additional bmap btree block due to a split of the
+ * bmap btree of the file. The result of this may lead to an
+ * infinite loop in xfssyncd when the file gets flushed to disk and
+ * all delayed extents need to be actually allocated. To get around
+ * this, we explicitly set aside a few blocks which will not be
+ * reserved in delayed allocation. Considering the minimum number of
+ * needed freelist blocks is 4 fsbs _per AG_, a potential split of file's bmap
+ * btree requires 1 fsb, so we set the number of set-aside blocks
+ * to 4 + 4*agcount.
+ */
+#define XFS_ALLOC_SET_ASIDE(mp)  (4 + ((mp)->m_sb.sb_agcount * 4))
+
 /*
  * Argument structure for xfs_alloc routines.
  * This is turned into a structure to avoid having 20 arguments passed

fs/xfs/xfs_fsops.c

@@ -462,7 +462,7 @@ xfs_fs_counts(
 
 	xfs_icsb_sync_counters_lazy(mp);
 	s = XFS_SB_LOCK(mp);
-	cnt->freedata = mp->m_sb.sb_fdblocks;
+	cnt->freedata = mp->m_sb.sb_fdblocks - XFS_ALLOC_SET_ASIDE(mp);
 	cnt->freertx = mp->m_sb.sb_frextents;
 	cnt->freeino = mp->m_sb.sb_ifree;
 	cnt->allocino = mp->m_sb.sb_icount;
@@ -519,15 +519,19 @@ xfs_reserve_blocks(
 		}
 		mp->m_resblks = request;
 	} else {
+		__int64_t	free;
+
+		free =  mp->m_sb.sb_fdblocks - XFS_ALLOC_SET_ASIDE(mp);
 		delta = request - mp->m_resblks;
-		lcounter = mp->m_sb.sb_fdblocks - delta;
+		lcounter = free - delta;
 		if (lcounter < 0) {
 			/* We can't satisfy the request, just get what we can */
-			mp->m_resblks += mp->m_sb.sb_fdblocks;
-			mp->m_resblks_avail += mp->m_sb.sb_fdblocks;
-			mp->m_sb.sb_fdblocks = 0;
+			mp->m_resblks += free;
+			mp->m_resblks_avail += free;
+			mp->m_sb.sb_fdblocks = XFS_ALLOC_SET_ASIDE(mp);
 		} else {
-			mp->m_sb.sb_fdblocks = lcounter;
+			mp->m_sb.sb_fdblocks =
+				lcounter + XFS_ALLOC_SET_ASIDE(mp);
 			mp->m_resblks = request;
 			mp->m_resblks_avail += delta;
 		}

fs/xfs/xfs_mount.c

@@ -1243,24 +1243,6 @@ xfs_mod_sb(xfs_trans_t *tp, __int64_t fields)
 	xfs_trans_log_buf(tp, bp, first, last);
 }
 
-/*
- * In order to avoid ENOSPC-related deadlock caused by
- * out-of-order locking of AGF buffer (PV 947395), we place
- * constraints on the relationship among actual allocations for
- * data blocks, freelist blocks, and potential file data bmap
- * btree blocks. However, these restrictions may result in no
- * actual space allocated for a delayed extent, for example, a data
- * block in a certain AG is allocated but there is no additional
- * block for the additional bmap btree block due to a split of the
- * bmap btree of the file. The result of this may lead to an
- * infinite loop in xfssyncd when the file gets flushed to disk and
- * all delayed extents need to be actually allocated. To get around
- * this, we explicitly set aside a few blocks which will not be
- * reserved in delayed allocation. Considering the minimum number of
- * needed freelist blocks is 4 fsbs, a potential split of file's bmap
- * btree requires 1 fsb, so we set the number of set-aside blocks to 8.
-*/
-#define SET_ASIDE_BLOCKS 8
 
 /*
  * xfs_mod_incore_sb_unlocked() is a utility routine common used to apply
@@ -1306,7 +1288,8 @@ xfs_mod_incore_sb_unlocked(xfs_mount_t *mp, xfs_sb_field_t field,
 		return 0;
 	case XFS_SBS_FDBLOCKS:
 
-		lcounter = (long long)mp->m_sb.sb_fdblocks - SET_ASIDE_BLOCKS;
+		lcounter = (long long)
+			mp->m_sb.sb_fdblocks - XFS_ALLOC_SET_ASIDE(mp);
 		res_used = (long long)(mp->m_resblks - mp->m_resblks_avail);
 
 		if (delta > 0) {		/* Putting blocks back */
@@ -1340,7 +1323,7 @@ xfs_mod_incore_sb_unlocked(xfs_mount_t *mp, xfs_sb_field_t field,
 			}
 		}
 
-		mp->m_sb.sb_fdblocks = lcounter + SET_ASIDE_BLOCKS;
+		mp->m_sb.sb_fdblocks = lcounter + XFS_ALLOC_SET_ASIDE(mp);
 		return 0;
 	case XFS_SBS_FREXTENTS:
 		lcounter = (long long)mp->m_sb.sb_frextents;
@@ -2021,7 +2004,8 @@ xfs_icsb_sync_counters_lazy(
  * when we get near ENOSPC.
  */
 #define XFS_ICSB_INO_CNTR_REENABLE	64
-#define XFS_ICSB_FDBLK_CNTR_REENABLE	512
+#define XFS_ICSB_FDBLK_CNTR_REENABLE(mp) \
+		(512 + XFS_ALLOC_SET_ASIDE(mp))
 STATIC void
 xfs_icsb_balance_counter(
 	xfs_mount_t	*mp,
@@ -2055,7 +2039,7 @@ xfs_icsb_balance_counter(
 	case XFS_SBS_FDBLOCKS:
 		count = mp->m_sb.sb_fdblocks;
 		resid = do_div(count, weight);
-		if (count < XFS_ICSB_FDBLK_CNTR_REENABLE)
+		if (count < XFS_ICSB_FDBLK_CNTR_REENABLE(mp))
 			goto out;
 		break;
 	default:
@@ -2110,11 +2094,11 @@ xfs_icsb_modify_counters_int(
 	case XFS_SBS_FDBLOCKS:
 		BUG_ON((mp->m_resblks - mp->m_resblks_avail) != 0);
 
-		lcounter = icsbp->icsb_fdblocks;
+		lcounter = icsbp->icsb_fdblocks - XFS_ALLOC_SET_ASIDE(mp);
 		lcounter += delta;
 		if (unlikely(lcounter < 0))
 			goto slow_path;
-		icsbp->icsb_fdblocks = lcounter;
+		icsbp->icsb_fdblocks = lcounter + XFS_ALLOC_SET_ASIDE(mp);
 		break;
 	default:
 		BUG();

fs/xfs/xfs_vfsops.c

@@ -811,7 +811,8 @@ xfs_statvfs(
 	statp->f_bsize = sbp->sb_blocksize;
 	lsize = sbp->sb_logstart ? sbp->sb_logblocks : 0;
 	statp->f_blocks = sbp->sb_dblocks - lsize;
-	statp->f_bfree = statp->f_bavail = sbp->sb_fdblocks;
+	statp->f_bfree = statp->f_bavail =
+				sbp->sb_fdblocks - XFS_ALLOC_SET_ASIDE(mp);
 	fakeinos = statp->f_bfree << sbp->sb_inopblog;
 #if XFS_BIG_INUMS
 	fakeinos += mp->m_inoadd;

include/asm-sh64/bug.h

 #ifndef __ASM_SH64_BUG_H
 #define __ASM_SH64_BUG_H
 
-
+#ifdef CONFIG_BUG
 /*
  * Tell the user there is some problem, then force a segfault (in process
  * context) or a panic (interrupt context).
@@ -11,17 +11,9 @@
 	*(volatile int *)0 = 0; \
 } while (0)
 
-#define BUG_ON(condition) do { \
-	if (unlikely((condition)!=0)) \
-		BUG(); \
-} while(0)
+#define HAVE_ARCH_BUG
+#endif
 
-#define WARN_ON(condition) do { \
-	if (unlikely((condition)!=0)) { \
-		printk("Badness in %s at %s:%d\n", __FUNCTION__, __FILE__, __LINE__); \
-		dump_stack(); \
-	} \
-} while (0)
+#include <asm-generic/bug.h>
 
 #endif /* __ASM_SH64_BUG_H */
-

include/asm-sh64/byteorder.h

@@ -14,7 +14,7 @@
 
 #include <asm/types.h>
 
-static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
 {
 	__asm__("byterev	%0, %0\n\t"
 		"shari		%0, 32, %0"
@@ -23,7 +23,7 @@ static __inline__ __const__ __u32 ___arch__swab32(__u32 x)
 	return x;
 }
 
-static __inline__ __const__ __u16 ___arch__swab16(__u16 x)
+static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
 {
 	__asm__("byterev	%0, %0\n\t"
 		"shari		%0, 48, %0"

include/asm-sh64/dma-mapping.h

@@ -126,22 +126,30 @@ static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
 static inline void dma_sync_single_for_cpu(struct device *dev,
 					   dma_addr_t dma_handle, size_t size,
 					   enum dma_data_direction dir)
-	__attribute__ ((alias("dma_sync_single")));
+{
+	dma_sync_single(dev, dma_handle, size, dir);
+}
 
 static inline void dma_sync_single_for_device(struct device *dev,
 					   dma_addr_t dma_handle, size_t size,
 					   enum dma_data_direction dir)
-	__attribute__ ((alias("dma_sync_single")));
+{
+	dma_sync_single(dev, dma_handle, size, dir);
+}
 
 static inline void dma_sync_sg_for_cpu(struct device *dev,
 				       struct scatterlist *sg, int nelems,
 				       enum dma_data_direction dir)
-	__attribute__ ((alias("dma_sync_sg")));
+{
+	dma_sync_sg(dev, sg, nelems, dir);
+}
 
 static inline void dma_sync_sg_for_device(struct device *dev,
 				       struct scatterlist *sg, int nelems,
 				       enum dma_data_direction dir)
-	__attribute__ ((alias("dma_sync_sg")));
+{
+	dma_sync_sg(dev, sg, nelems, dir);
+}
 
 static inline int dma_get_cache_alignment(void)
 {

include/asm-sh64/io.h

@@ -123,6 +123,13 @@ void insw(unsigned long port, void *addr, unsigned long count);
 void outsl(unsigned long port, const void *addr, unsigned long count);
 void insl(unsigned long port, void *addr, unsigned long count);
 
+#define __raw_readb		readb
+#define __raw_readw		readw
+#define __raw_readl		readl
+#define __raw_writeb		writeb
+#define __raw_writew		writew
+#define __raw_writel		writel
+
 void memcpy_toio(void __iomem *to, const void *from, long count);
 void memcpy_fromio(void *to, void __iomem *from, long count);
 

include/asm-sh64/ptrace.h

@@ -28,7 +28,7 @@ struct pt_regs {
 #ifdef __KERNEL__
 #define user_mode(regs) (((regs)->sr & 0x40000000)==0)
 #define instruction_pointer(regs) ((regs)->pc)
-#define profile_pc(regs) instruction_pointer(regs)
+#define profile_pc(regs) ((unsigned long)instruction_pointer(regs))
 extern void show_regs(struct pt_regs *);
 #endif
 

include/asm-sh64/system.h

@@ -64,7 +64,7 @@ extern void __xchg_called_with_bad_pointer(void);
 #define smp_read_barrier_depends()	do { } while (0)
 #endif /* CONFIG_SMP */
 
-#define set_rmb(var, value) do { xchg(&var, value); } while (0)
+#define set_rmb(var, value) do { (void)xchg(&var, value); } while (0)
 #define set_mb(var, value) set_rmb(var, value)
 
 /* Interrupt Control */

include/asm-sh64/uaccess.h

@@ -128,25 +128,20 @@ do {								\
 
 #define __get_user_nocheck(x,ptr,size)				\
 ({								\
-	long __gu_addr = (long)(ptr);				\
-	long __gu_err;						\
-	__typeof(*(ptr)) __gu_val;				\
-	__asm__ ("":"=r" (__gu_val));				\
-	__asm__ ("":"=r" (__gu_err));				\
-	__get_user_size((void *)&__gu_val, __gu_addr, (size), __gu_err); \
-	(x) = (__typeof__(*(ptr))) __gu_val;			\
+	long __gu_err, __gu_val;				\
+	__get_user_size((void *)&__gu_val, (long)(ptr),		\
+			(size), __gu_err);			\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
 	__gu_err;						\
 })
 
 #define __get_user_check(x,ptr,size)				\
 ({								\
 	long __gu_addr = (long)(ptr);				\
-	long __gu_err = -EFAULT;				\
-	__typeof(*(ptr)) __gu_val;				\
-	__asm__ ("":"=r" (__gu_val));				\
-	__asm__ ("":"=r" (__gu_err));				\
+	long __gu_err = -EFAULT, __gu_val;			\
 	if (__access_ok(__gu_addr, (size)))			\
-		__get_user_size((void *)&__gu_val, __gu_addr, (size), __gu_err); \
+		__get_user_size((void *)&__gu_val, __gu_addr,	\
+				(size), __gu_err);		\
 	(x) = (__typeof__(*(ptr))) __gu_val;			\
 	__gu_err;						\
 })

include/linux/videodev.h

@@ -14,8 +14,7 @@
 
 #include <linux/videodev2.h>
 
-#ifdef CONFIG_VIDEO_V4L1_COMPAT
-#define HAVE_V4L1 1
+#if defined(CONFIG_VIDEO_V4L1_COMPAT) || !defined (__KERNEL__)
 
 struct video_capability
 {

include/linux/videodev2.h

@@ -22,8 +22,6 @@
 #endif
 #include <linux/types.h>
 
-#define HAVE_V4L2 1
-
 /*
  * Common stuff for both V4L1 and V4L2
  * Moved from videodev.h

include/media/v4l2-dev.h

@@ -194,7 +194,7 @@ struct video_device
 
 
 	int (*vidioc_overlay) (struct file *file, void *fh, unsigned int i);
-#ifdef HAVE_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 			/* buffer type is struct vidio_mbuf * */
 	int (*vidiocgmbuf)  (struct file *file, void *fh, struct video_mbuf *p);
 #endif
@@ -335,7 +335,7 @@ extern int video_usercopy(struct inode *inode, struct file *file,
 				      unsigned int cmd, void *arg));
 
 
-#ifdef HAVE_V4L1
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
 #include <linux/mm.h>
 
 extern struct video_device* video_devdata(struct file*);
@@ -357,6 +357,8 @@ video_device_remove_file(struct video_device *vfd,
 	class_device_remove_file(&vfd->class_dev, attr);
 }
 
+#endif /* CONFIG_VIDEO_V4L1_COMPAT */
+
 #ifdef OBSOLETE_OWNER /* to be removed soon */
 /* helper functions to access driver private data. */
 static inline void *video_get_drvdata(struct video_device *dev)
@@ -372,6 +374,5 @@ static inline void video_set_drvdata(struct video_device *dev, void *data)
 
 extern int video_exclusive_open(struct inode *inode, struct file *file);
 extern int video_exclusive_release(struct inode *inode, struct file *file);
-#endif /* HAVE_V4L1 */
 
 #endif /* _V4L2_DEV_H */

lib/Kconfig

@@ -38,6 +38,11 @@ config LIBCRC32C
 	  require M here.  See Castagnoli93.
 	  Module will be libcrc32c.
 
+config AUDIT_GENERIC
+	bool
+	depends on AUDIT && !AUDIT_ARCH
+	default y
+
 #
 # compression support is select'ed if needed
 #

lib/Makefile

@@ -49,6 +49,7 @@ obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
 obj-$(CONFIG_TEXTSEARCH_BM) += ts_bm.o
 obj-$(CONFIG_TEXTSEARCH_FSM) += ts_fsm.o
 obj-$(CONFIG_SMP) += percpu_counter.o
+obj-$(CONFIG_AUDIT_GENERIC) += audit.o
 
 obj-$(CONFIG_SWIOTLB) += swiotlb.o
 

arch/i386/kernel/audit.c → lib/audit.c

@@ -30,8 +30,10 @@ int audit_classify_syscall(int abi, unsigned syscall)
 		return 2;
 	case __NR_openat:
 		return 3;
+#ifdef __NR_socketcall
 	case __NR_socketcall:
 		return 4;
+#endif
 	case __NR_execve:
 		return 5;
 	default: