mtd: eLBC NAND: fix subpage write support

As subpage write is enabled by default for all drivers, nand_write_subpage_hwecc
causes a crash if the driver did not register ecc->hwctl or ecc->calculate.
This behavior was introduced in
   commit 837a6ba4
   "mtd: nand: subpage write support for hardware based ECC schemes".

This fixes a crash by emulating subpage write support by padding sub-page data
with 0xff on either sides to make it full page compatible.
Reported-by: Helmut Schaa <helmut.schaa@googlemail.com>
Tested-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Pekon Gupta <pekon@ti.com>
Reviewed-by: Scott Wood <scottwood@freescale.com>
Cc: <stable@vger.kernel.org> # 3.10.x+
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

drivers/mtd/nand/fsl_elbc_nand.c

@@ -723,6 +723,19 @@ static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 	return 0;
 }
 
+/* ECC will be calculated automatically, and errors will be detected in
+ * waitfunc.
+ */
+static int fsl_elbc_write_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+				uint32_t offset, uint32_t data_len,
+				const uint8_t *buf, int oob_required)
+{
+	fsl_elbc_write_buf(mtd, buf, mtd->writesize);
+	fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
 static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 {
 	struct fsl_lbc_ctrl *ctrl = priv->ctrl;
@@ -761,6 +774,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
 
 	chip->ecc.read_page = fsl_elbc_read_page;
 	chip->ecc.write_page = fsl_elbc_write_page;
+	chip->ecc.write_subpage = fsl_elbc_write_subpage;
 
 	/* If CS Base Register selects full hardware ECC then use it */
 	if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==