Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 - Minor updates and fixes to the Octeon ethernet driver in staging
 - A fix to VGA_MAP_MEM() for 64 bit platforms
 - Fix a workaround for 74K/1074K processors
 - The symlink arch/mips/boot/dts/include/dt-bindings was pointing to a
   a file with a name ending in \n.  I think this may have been caused
   by a git bug with with patches sent by email
 - A build fix for VGA console on BCM1480-based systems
 - Fix PCI device access via "/sys/bus/pci/.../resource0" or similar
   work for Alchemy platforms
 - Fix potential data leak on MIPS R5 cores.  This doesn't add proper
   support for any R5 features, just ensures a kernel without such
   support will be secure to run
 - Adding a macros for the CP0 Config5 register to be used by the R5 fix
 - Make get_cycles() actually return something useful where possible
   This also requires a preparatory patch for performance sake
 - Fix a warning about the use of smp_processor_id() in preemptible
   code.  Again this includes a preparatory patch adding the
   infrastructure to be used by the actual patch
 - Finally remove pointless one-line comment

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Fix invalid symbolic link file
  MIPS: PCI: pci-bcm1480: Include missing vt.h header
  MIPS: Disable usermode switching of the FR bit for MIPS R5 CPUs.
  MIPS: Add MIPS R5 config5 register.
  MIPS: PCI: Use pci_resource_to_user to map pci memory space properly
  MIPS: 74K/1074K: Correct erratum workaround.
  MIPS: Cleanup CP0 PRId and CP1 FPIR register access masks
  MIPS: Remove useless comment about kprobe from arch/mips/Makefile
  MIPS: Fix VGA_MAP_MEM macro.
  MIPS: Reimplement get_cycles().
  MIPS: Optimize current_cpu_type() for better code.
  MIPS: Fix accessing to per-cpu data when flushing the cache
  MIPS: Provide nice way to access boot CPU's data.
  staging: octeon-ethernet: rgmii: enable interrupts that we can handle
  staging: octeon-ethernet: remove skb alloc failure warnings
  staging: octeon-ethernet: make dropped packets to consume NAPI budget

arch/mips/Makefile

@@ -288,9 +288,6 @@ endif
 vmlinux.32: vmlinux
 	$(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
 
-
-#obj-$(CONFIG_KPROBES)		+= kprobes.o
-
 #
 # The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
 # ELF files from 32-bit files by conversion.

arch/mips/alchemy/common/usb.c

@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/syscore_ops.h>
+#include <asm/cpu.h>
 #include <asm/mach-au1x00/au1000.h>
 
 /* control register offsets */
@@ -358,7 +359,7 @@ static inline int au1200_coherency_bug(void)
 {
 #if defined(CONFIG_DMA_COHERENT)
 	/* Au1200 AB USB does not support coherent memory */
-	if (!(read_c0_prid() & 0xff)) {
+	if (!(read_c0_prid() & PRID_REV_MASK)) {
 		printk(KERN_INFO "Au1200 USB: this is chip revision AB !!\n");
 		printk(KERN_INFO "Au1200 USB: update your board or re-configure"
 				 " the kernel\n");

arch/mips/bcm63xx/cpu.c

@@ -306,14 +306,14 @@ void __init bcm63xx_cpu_init(void)
 
 	switch (c->cputype) {
 	case CPU_BMIPS3300:
-		if ((read_c0_prid() & 0xff00) != PRID_IMP_BMIPS3300_ALT)
+		if ((read_c0_prid() & PRID_IMP_MASK) != PRID_IMP_BMIPS3300_ALT)
 			__cpu_name[cpu] = "Broadcom BCM6338";
 		/* fall-through */
 	case CPU_BMIPS32:
 		chipid_reg = BCM_6345_PERF_BASE;
 		break;
 	case CPU_BMIPS4350:
-		switch ((read_c0_prid() & 0xff)) {
+		switch ((read_c0_prid() & PRID_REV_MASK)) {
 		case 0x04:
 			chipid_reg = BCM_3368_PERF_BASE;
 			break;

arch/mips/cavium-octeon/csrc-octeon.c

@@ -12,6 +12,7 @@
 #include <linux/smp.h>
 
 #include <asm/cpu-info.h>
+#include <asm/cpu-type.h>
 #include <asm/time.h>
 
 #include <asm/octeon/octeon.h>

arch/mips/dec/prom/init.c

@@ -13,6 +13,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/processor.h>
 
 #include <asm/dec/prom.h>

arch/mips/include/asm/cpu-features.h

@@ -13,12 +13,6 @@
 #include <asm/cpu-info.h>
 #include <cpu-feature-overrides.h>
 
-#ifndef current_cpu_type
-#define current_cpu_type()	current_cpu_data.cputype
-#endif
-
-#define boot_cpu_type()		cpu_data[0].cputype
-
 /*
  * SMP assumption: Options of CPU 0 are a superset of all processors.
  * This is true for all known MIPS systems.

arch/mips/include/asm/cpu-info.h

@@ -84,6 +84,7 @@ struct cpuinfo_mips {
 extern struct cpuinfo_mips cpu_data[];
 #define current_cpu_data cpu_data[smp_processor_id()]
 #define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+#define boot_cpu_data cpu_data[0]
 
 extern void cpu_probe(void);
 extern void cpu_report(void);

arch/mips/include/asm/cpu-type.h

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ * Copyright (C) 2004  Maciej W. Rozycki
+ */
+#ifndef __ASM_CPU_TYPE_H
+#define __ASM_CPU_TYPE_H
+
+#include <linux/smp.h>
+#include <linux/compiler.h>
+
+static inline int __pure __get_cpu_type(const int cpu_type)
+{
+	switch (cpu_type) {
+#if defined(CONFIG_SYS_HAS_CPU_LOONGSON2E) || \
+    defined(CONFIG_SYS_HAS_CPU_LOONGSON2F)
+	case CPU_LOONGSON2:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_LOONGSON1B
+	case CPU_LOONGSON1:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R1
+	case CPU_4KC:
+	case CPU_ALCHEMY:
+	case CPU_BMIPS3300:
+	case CPU_BMIPS4350:
+	case CPU_PR4450:
+	case CPU_BMIPS32:
+	case CPU_JZRISC:
+#endif
+
+#if defined(CONFIG_SYS_HAS_CPU_MIPS32_R1) || \
+    defined(CONFIG_SYS_HAS_CPU_MIPS32_R2)
+	case CPU_4KEC:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS32_R2
+	case CPU_4KSC:
+	case CPU_24K:
+	case CPU_34K:
+	case CPU_1004K:
+	case CPU_74K:
+	case CPU_M14KC:
+	case CPU_M14KEC:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R1
+	case CPU_5KC:
+	case CPU_5KE:
+	case CPU_20KC:
+	case CPU_25KF:
+	case CPU_SB1:
+	case CPU_SB1A:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_MIPS64_R2
+	/*
+	 * All MIPS64 R2 processors have their own special symbols.  That is,
+	 * there currently is no pure R2 core
+	 */
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R3000
+	case CPU_R2000:
+	case CPU_R3000:
+	case CPU_R3000A:
+	case CPU_R3041:
+	case CPU_R3051:
+	case CPU_R3052:
+	case CPU_R3081:
+	case CPU_R3081E:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_TX39XX
+	case CPU_TX3912:
+	case CPU_TX3922:
+	case CPU_TX3927:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_VR41XX
+	case CPU_VR41XX:
+	case CPU_VR4111:
+	case CPU_VR4121:
+	case CPU_VR4122:
+	case CPU_VR4131:
+	case CPU_VR4133:
+	case CPU_VR4181:
+	case CPU_VR4181A:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R4300
+	case CPU_R4300:
+	case CPU_R4310:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R4X00
+	case CPU_R4000PC:
+	case CPU_R4000SC:
+	case CPU_R4000MC:
+	case CPU_R4200:
+	case CPU_R4400PC:
+	case CPU_R4400SC:
+	case CPU_R4400MC:
+	case CPU_R4600:
+	case CPU_R4700:
+	case CPU_R4640:
+	case CPU_R4650:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_TX49XX
+	case CPU_TX49XX:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R5000
+	case CPU_R5000:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R5432
+	case CPU_R5432:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R5500
+	case CPU_R5500:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R6000
+	case CPU_R6000:
+	case CPU_R6000A:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_NEVADA
+	case CPU_NEVADA:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R8000
+	case CPU_R8000:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_R10000
+	case CPU_R10000:
+	case CPU_R12000:
+	case CPU_R14000:
+#endif
+#ifdef CONFIG_SYS_HAS_CPU_RM7000
+	case CPU_RM7000:
+	case CPU_SR71000:
+#endif
+#ifdef CONFIG_SYS_HAS_CPU_RM9000
+	case CPU_RM9000:
+#endif
+#ifdef CONFIG_SYS_HAS_CPU_SB1
+	case CPU_SB1:
+	case CPU_SB1A:
+#endif
+#ifdef CONFIG_SYS_HAS_CPU_CAVIUM_OCTEON
+	case CPU_CAVIUM_OCTEON:
+	case CPU_CAVIUM_OCTEON_PLUS:
+	case CPU_CAVIUM_OCTEON2:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_BMIPS4380
+	case CPU_BMIPS4380:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_BMIPS5000
+	case CPU_BMIPS5000:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_XLP
+	case CPU_XLP:
+#endif
+
+#ifdef CONFIG_SYS_HAS_CPU_XLR
+	case CPU_XLR:
+#endif
+		break;
+	default:
+		unreachable();
+	}
+
+	return cpu_type;
+}
+
+static inline int __pure current_cpu_type(void)
+{
+	const int cpu_type = current_cpu_data.cputype;
+
+	return __get_cpu_type(cpu_type);
+}
+
+static inline int __pure boot_cpu_type(void)
+{
+	const int cpu_type = cpu_data[0].cputype;
+
+	return __get_cpu_type(cpu_type);
+}
+
+#endif /* __ASM_CPU_TYPE_H */

arch/mips/include/asm/cpu.h

@@ -3,15 +3,14 @@
  *	  various MIPS cpu types.
  *
  * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
- * Copyright (C) 2004  Maciej W. Rozycki
+ * Copyright (C) 2004, 2013  Maciej W. Rozycki
  */
 #ifndef _ASM_CPU_H
 #define _ASM_CPU_H
 
-/* Assigned Company values for bits 23:16 of the PRId Register
-   (CP0 register 15, select 0).	 As of the MIPS32 and MIPS64 specs from
-   MTI, the PRId register is defined in this (backwards compatible)
-   way:
+/*
+   As of the MIPS32 and MIPS64 specs from MTI, the PRId register (CP0
+   register 15, select 0) is defined in this (backwards compatible) way:
 
   +----------------+----------------+----------------+----------------+
   | Company Options| Company ID	    | Processor ID   | Revision	      |
@@ -23,6 +22,14 @@
    spec.
 */
 
+#define PRID_OPT_MASK		0xff000000
+
+/*
+ * Assigned Company values for bits 23:16 of the PRId register.
+ */
+
+#define PRID_COMP_MASK		0xff0000
+
 #define PRID_COMP_LEGACY	0x000000
 #define PRID_COMP_MIPS		0x010000
 #define PRID_COMP_BROADCOM	0x020000
@@ -38,10 +45,17 @@
 #define PRID_COMP_INGENIC	0xd00000
 
 /*
- * Assigned values for the product ID register.	 In order to detect a
- * certain CPU type exactly eventually additional registers may need to
- * be examined.	 These are valid when 23:16 == PRID_COMP_LEGACY
+ * Assigned Processor ID (implementation) values for bits 15:8 of the PRId
+ * register.  In order to detect a certain CPU type exactly eventually
+ * additional registers may need to be examined.
  */
+
+#define PRID_IMP_MASK		0xff00
+
+/*
+ * These are valid when 23:16 == PRID_COMP_LEGACY
+ */
+
 #define PRID_IMP_R2000		0x0100
 #define PRID_IMP_AU1_REV1	0x0100
 #define PRID_IMP_AU1_REV2	0x0200
@@ -182,11 +196,15 @@
 #define PRID_IMP_NETLOGIC_XLP2XX	0x1200
 
 /*
- * Definitions for 7:0 on legacy processors
+ * Particular Revision values for bits 7:0 of the PRId register.
  */
 
 #define PRID_REV_MASK		0x00ff
 
+/*
+ * Definitions for 7:0 on legacy processors
+ */
+
 #define PRID_REV_TX4927		0x0022
 #define PRID_REV_TX4937		0x0030
 #define PRID_REV_R4400		0x0040
@@ -227,6 +245,8 @@
  *  31				   16 15	     8 7	      0
  */
 
+#define FPIR_IMP_MASK		0xff00
+
 #define FPIR_IMP_NONE		0x0000
 
 enum cpu_type_enum {

arch/mips/include/asm/mach-au1x00/au1000.h

@@ -43,6 +43,8 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
+#include <asm/cpu.h>
+
 /* cpu pipeline flush */
 void static inline au_sync(void)
 {
@@ -140,7 +142,7 @@ static inline int au1xxx_cpu_needs_config_od(void)
 
 static inline int alchemy_get_cputype(void)
 {
-	switch (read_c0_prid() & 0xffff0000) {
+	switch (read_c0_prid() & (PRID_OPT_MASK | PRID_COMP_MASK)) {
 	case 0x00030000:
 		return ALCHEMY_CPU_AU1000;
 		break;

arch/mips/include/asm/mach-ip22/cpu-feature-overrides.h

@@ -8,6 +8,8 @@
 #ifndef __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
 #define __ASM_MACH_IP22_CPU_FEATURE_OVERRIDES_H
 
+#include <asm/cpu.h>
+
 /*
  * IP22 with a variety of processors so we can't use defaults for everything.
  */

arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h

@@ -8,6 +8,8 @@
 #ifndef __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
 #define __ASM_MACH_IP27_CPU_FEATURE_OVERRIDES_H
 
+#include <asm/cpu.h>
+
 /*
  * IP27 only comes with R10000 family processors all using the same config
  */

arch/mips/include/asm/mach-ip28/cpu-feature-overrides.h

@@ -9,6 +9,8 @@
 #ifndef __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
 #define __ASM_MACH_IP28_CPU_FEATURE_OVERRIDES_H
 
+#include <asm/cpu.h>
+
 /*
  * IP28 only comes with R10000 family processors all using the same config
  */

arch/mips/include/asm/mipsregs.h

@@ -603,6 +603,13 @@
 #define MIPS_CONF4_MMUEXTDEF	(_ULCAST_(3) << 14)
 #define MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT (_ULCAST_(1) << 14)
 
+#define MIPS_CONF5_NF		(_ULCAST_(1) << 0)
+#define MIPS_CONF5_UFR		(_ULCAST_(1) << 2)
+#define MIPS_CONF5_MSAEN	(_ULCAST_(1) << 27)
+#define MIPS_CONF5_EVA		(_ULCAST_(1) << 28)
+#define MIPS_CONF5_CV		(_ULCAST_(1) << 29)
+#define MIPS_CONF5_K		(_ULCAST_(1) << 30)
+
 #define MIPS_CONF6_SYND		(_ULCAST_(1) << 13)
 
 #define MIPS_CONF7_WII		(_ULCAST_(1) << 31)

arch/mips/include/asm/pci.h

@@ -83,6 +83,18 @@ static inline void pcibios_penalize_isa_irq(int irq, int active)
 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 	enum pci_mmap_state mmap_state, int write_combine);
 
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+
+static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
+		const struct resource *rsrc, resource_size_t *start,
+		resource_size_t *end)
+{
+	phys_t size = resource_size(rsrc);
+
+	*start = fixup_bigphys_addr(rsrc->start, size);
+	*end = rsrc->start + size;
+}
+
 /*
  * Dynamic DMA mapping stuff.
  * MIPS has everything mapped statically.

arch/mips/include/asm/timex.h

@@ -10,7 +10,9 @@
 
 #ifdef __KERNEL__
 
+#include <asm/cpu-features.h>
 #include <asm/mipsregs.h>
+#include <asm/cpu-type.h>
 
 /*
  * This is the clock rate of the i8253 PIT.  A MIPS system may not have
@@ -33,9 +35,38 @@
 
 typedef unsigned int cycles_t;
 
+/*
+ * On R4000/R4400 before version 5.0 an erratum exists such that if the
+ * cycle counter is read in the exact moment that it is matching the
+ * compare register, no interrupt will be generated.
+ *
+ * There is a suggested workaround and also the erratum can't strike if
+ * the compare interrupt isn't being used as the clock source device.
+ * However for now the implementaton of this function doesn't get these
+ * fine details right.
+ */
 static inline cycles_t get_cycles(void)
 {
-	return 0;
+	switch (boot_cpu_type()) {
+	case CPU_R4400PC:
+	case CPU_R4400SC:
+	case CPU_R4400MC:
+		if ((read_c0_prid() & 0xff) >= 0x0050)
+			return read_c0_count();
+		break;
+
+        case CPU_R4000PC:
+        case CPU_R4000SC:
+        case CPU_R4000MC:
+		break;
+
+	default:
+		if (cpu_has_counter)
+			return read_c0_count();
+		break;
+	}
+
+	return 0;	/* no usable counter */
 }
 
 #endif /* __KERNEL__ */

arch/mips/include/asm/vga.h

@@ -6,6 +6,7 @@
 #ifndef _ASM_VGA_H
 #define _ASM_VGA_H
 
+#include <asm/addrspace.h>
 #include <asm/byteorder.h>
 
 /*
@@ -13,7 +14,7 @@
  *	access the videoram directly without any black magic.
  */
 
-#define VGA_MAP_MEM(x, s)	(0xb0000000L + (unsigned long)(x))
+#define VGA_MAP_MEM(x, s)	CKSEG1ADDR(0x10000000L + (unsigned long)(x))
 
 #define vga_readb(x)	(*(x))
 #define vga_writeb(x, y)	(*(y) = (x))

arch/mips/kernel/cpu-probe.c

@@ -20,6 +20,7 @@
 
 #include <asm/bugs.h>
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
 #include <asm/watch.h>
@@ -55,7 +56,7 @@ static inline void check_errata(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_34K:
 		/*
 		 * Erratum "RPS May Cause Incorrect Instruction Execution"
@@ -122,7 +123,7 @@ static inline unsigned long cpu_get_fpu_id(void)
  */
 static inline int __cpu_has_fpu(void)
 {
-	return ((cpu_get_fpu_id() & 0xff00) != FPIR_IMP_NONE);
+	return ((cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE);
 }
 
 static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
@@ -290,6 +291,17 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c)
 	return config4 & MIPS_CONF_M;
 }
 
+static inline unsigned int decode_config5(struct cpuinfo_mips *c)
+{
+	unsigned int config5;
+
+	config5 = read_c0_config5();
+	config5 &= ~MIPS_CONF5_UFR;
+	write_c0_config5(config5);
+
+	return config5 & MIPS_CONF_M;
+}
+
 static void decode_configs(struct cpuinfo_mips *c)
 {
 	int ok;
@@ -310,6 +322,8 @@ static void decode_configs(struct cpuinfo_mips *c)
 		ok = decode_config3(c);
 	if (ok)
 		ok = decode_config4(c);
+	if (ok)
+		ok = decode_config5(c);
 
 	mips_probe_watch_registers(c);
 
@@ -322,7 +336,7 @@ static void decode_configs(struct cpuinfo_mips *c)
 
 static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 {
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_R2000:
 		c->cputype = CPU_R2000;
 		__cpu_name[cpu] = "R2000";
@@ -333,7 +347,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		c->tlbsize = 64;
 		break;
 	case PRID_IMP_R3000:
-		if ((c->processor_id & 0xff) == PRID_REV_R3000A) {
+		if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) {
 			if (cpu_has_confreg()) {
 				c->cputype = CPU_R3081E;
 				__cpu_name[cpu] = "R3081";
@@ -353,7 +367,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		break;
 	case PRID_IMP_R4000:
 		if (read_c0_config() & CONF_SC) {
-			if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
+			if ((c->processor_id & PRID_REV_MASK) >=
+			    PRID_REV_R4400) {
 				c->cputype = CPU_R4400PC;
 				__cpu_name[cpu] = "R4400PC";
 			} else {
@@ -361,7 +376,8 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 				__cpu_name[cpu] = "R4000PC";
 			}
 		} else {
-			if ((c->processor_id & 0xff) >= PRID_REV_R4400) {
+			if ((c->processor_id & PRID_REV_MASK) >=
+			    PRID_REV_R4400) {
 				c->cputype = CPU_R4400SC;
 				__cpu_name[cpu] = "R4400SC";
 			} else {
@@ -454,7 +470,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 			__cpu_name[cpu] = "TX3927";
 			c->tlbsize = 64;
 		} else {
-			switch (c->processor_id & 0xff) {
+			switch (c->processor_id & PRID_REV_MASK) {
 			case PRID_REV_TX3912:
 				c->cputype = CPU_TX3912;
 				__cpu_name[cpu] = "TX3912";
@@ -640,7 +656,7 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_4KC:
 		c->cputype = CPU_4KC;
 		__cpu_name[cpu] = "MIPS 4Kc";
@@ -711,7 +727,7 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_AU1_REV1:
 	case PRID_IMP_AU1_REV2:
 		c->cputype = CPU_ALCHEMY;
@@ -730,7 +746,7 @@ static inline void cpu_probe_alchemy(struct cpuinfo_mips *c, unsigned int cpu)
 			break;
 		case 4:
 			__cpu_name[cpu] = "Au1200";
-			if ((c->processor_id & 0xff) == 2)
+			if ((c->processor_id & PRID_REV_MASK) == 2)
 				__cpu_name[cpu] = "Au1250";
 			break;
 		case 5:
@@ -748,12 +764,12 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
 
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_SB1:
 		c->cputype = CPU_SB1;
 		__cpu_name[cpu] = "SiByte SB1";
 		/* FPU in pass1 is known to have issues. */
-		if ((c->processor_id & 0xff) < 0x02)
+		if ((c->processor_id & PRID_REV_MASK) < 0x02)
 			c->options &= ~(MIPS_CPU_FPU | MIPS_CPU_32FPR);
 		break;
 	case PRID_IMP_SB1A:
@@ -766,7 +782,7 @@ static inline void cpu_probe_sibyte(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_SR71000:
 		c->cputype = CPU_SR71000;
 		__cpu_name[cpu] = "Sandcraft SR71000";
@@ -779,7 +795,7 @@ static inline void cpu_probe_sandcraft(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_PR4450:
 		c->cputype = CPU_PR4450;
 		__cpu_name[cpu] = "Philips PR4450";
@@ -791,7 +807,7 @@ static inline void cpu_probe_nxp(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_BMIPS32_REV4:
 	case PRID_IMP_BMIPS32_REV8:
 		c->cputype = CPU_BMIPS32;
@@ -806,7 +822,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 		set_elf_platform(cpu, "bmips3300");
 		break;
 	case PRID_IMP_BMIPS43XX: {
-		int rev = c->processor_id & 0xff;
+		int rev = c->processor_id & PRID_REV_MASK;
 
 		if (rev >= PRID_REV_BMIPS4380_LO &&
 				rev <= PRID_REV_BMIPS4380_HI) {
@@ -832,7 +848,7 @@ static inline void cpu_probe_broadcom(struct cpuinfo_mips *c, unsigned int cpu)
 static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu)
 {
 	decode_configs(c);
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_CAVIUM_CN38XX:
 	case PRID_IMP_CAVIUM_CN31XX:
 	case PRID_IMP_CAVIUM_CN30XX:
@@ -875,7 +891,7 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 	decode_configs(c);
 	/* JZRISC does not implement the CP0 counter. */
 	c->options &= ~MIPS_CPU_COUNTER;
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_JZRISC:
 		c->cputype = CPU_JZRISC;
 		__cpu_name[cpu] = "Ingenic JZRISC";
@@ -890,7 +906,7 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
 {
 	decode_configs(c);
 
-	if ((c->processor_id & 0xff00) == PRID_IMP_NETLOGIC_AU13XX) {
+	if ((c->processor_id & PRID_IMP_MASK) == PRID_IMP_NETLOGIC_AU13XX) {
 		c->cputype = CPU_ALCHEMY;
 		__cpu_name[cpu] = "Au1300";
 		/* following stuff is not for Alchemy */
@@ -905,7 +921,7 @@ static inline void cpu_probe_netlogic(struct cpuinfo_mips *c, int cpu)
 			MIPS_CPU_EJTAG	 |
 			MIPS_CPU_LLSC);
 
-	switch (c->processor_id & 0xff00) {
+	switch (c->processor_id & PRID_IMP_MASK) {
 	case PRID_IMP_NETLOGIC_XLP2XX:
 		c->cputype = CPU_XLP;
 		__cpu_name[cpu] = "Broadcom XLPII";
@@ -984,7 +1000,7 @@ void cpu_probe(void)
 	c->cputype	= CPU_UNKNOWN;
 
 	c->processor_id = read_c0_prid();
-	switch (c->processor_id & 0xff0000) {
+	switch (c->processor_id & PRID_COMP_MASK) {
 	case PRID_COMP_LEGACY:
 		cpu_probe_legacy(c, cpu);
 		break;

arch/mips/kernel/idle.c

@@ -18,6 +18,7 @@
 #include <linux/sched.h>
 #include <asm/cpu.h>
 #include <asm/cpu-info.h>
+#include <asm/cpu-type.h>
 #include <asm/idle.h>
 #include <asm/mipsregs.h>
 
@@ -136,7 +137,7 @@ void __init check_wait(void)
 		return;
 	}
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_R3081:
 	case CPU_R3081E:
 		cpu_wait = r3081_wait;

arch/mips/kernel/time.c

@@ -24,6 +24,7 @@
 #include <linux/export.h>
 
 #include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
 #include <asm/div64.h>
 #include <asm/smtc_ipi.h>
 #include <asm/time.h>

arch/mips/kernel/traps.c

@@ -39,6 +39,7 @@
 #include <asm/break.h>
 #include <asm/cop2.h>
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/dsp.h>
 #include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
@@ -622,7 +623,7 @@ static int simulate_rdhwr(struct pt_regs *regs, int rd, int rt)
 		regs->regs[rt] = read_c0_count();
 		return 0;
 	case 3:		/* Count register resolution */
-		switch (current_cpu_data.cputype) {
+		switch (current_cpu_type()) {
 		case CPU_20KC:
 		case CPU_25KF:
 			regs->regs[rt] = 1;

arch/mips/mm/c-octeon.c

@@ -19,6 +19,7 @@
 #include <asm/bootinfo.h>
 #include <asm/cacheops.h>
 #include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/r4kcache.h>
@@ -186,9 +187,10 @@ static void probe_octeon(void)
 	unsigned long dcache_size;
 	unsigned int config1;
 	struct cpuinfo_mips *c = &current_cpu_data;
+	int cputype = current_cpu_type();
 
 	config1 = read_c0_config1();
-	switch (c->cputype) {
+	switch (cputype) {
 	case CPU_CAVIUM_OCTEON:
 	case CPU_CAVIUM_OCTEON_PLUS:
 		c->icache.linesz = 2 << ((config1 >> 19) & 7);
@@ -199,7 +201,7 @@ static void probe_octeon(void)
 			c->icache.sets * c->icache.ways * c->icache.linesz;
 		c->icache.waybit = ffs(icache_size / c->icache.ways) - 1;
 		c->dcache.linesz = 128;
-		if (c->cputype == CPU_CAVIUM_OCTEON_PLUS)
+		if (cputype == CPU_CAVIUM_OCTEON_PLUS)
 			c->dcache.sets = 2; /* CN5XXX has two Dcache sets */
 		else
 			c->dcache.sets = 1; /* CN3XXX has one Dcache set */

arch/mips/mm/c-r4k.c

@@ -12,6 +12,7 @@
 #include <linux/highmem.h>
 #include <linux/kernel.h>
 #include <linux/linkage.h>
+#include <linux/preempt.h>
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
@@ -24,6 +25,7 @@
 #include <asm/cacheops.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
 #include <asm/io.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -601,6 +603,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
+	preempt_disable();
 	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
@@ -621,6 +624,7 @@ static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		blast_dcache_range(addr, addr + size);
 	}
+	preempt_enable();
 
 	bc_wback_inv(addr, size);
 	__sync();
@@ -631,6 +635,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 	/* Catch bad driver code */
 	BUG_ON(size == 0);
 
+	preempt_disable();
 	if (cpu_has_inclusive_pcaches) {
 		if (size >= scache_size)
 			r4k_blast_scache();
@@ -655,6 +660,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 		R4600_HIT_CACHEOP_WAR_IMPL;
 		blast_inv_dcache_range(addr, addr + size);
 	}
+	preempt_enable();
 
 	bc_inv(addr, size);
 	__sync();
@@ -780,21 +786,31 @@ static inline void rm7k_erratum31(void)
 
 static inline void alias_74k_erratum(struct cpuinfo_mips *c)
 {
+	unsigned int imp = c->processor_id & PRID_IMP_MASK;
+	unsigned int rev = c->processor_id & PRID_REV_MASK;
+
 	/*
 	 * Early versions of the 74K do not update the cache tags on a
 	 * vtag miss/ptag hit which can occur in the case of KSEG0/KUSEG
 	 * aliases. In this case it is better to treat the cache as always
 	 * having aliases.
 	 */
-	if ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(2, 4, 0))
+	switch (imp) {
+	case PRID_IMP_74K:
+		if (rev <= PRID_REV_ENCODE_332(2, 4, 0))
 			c->dcache.flags |= MIPS_CACHE_VTAG;
-	if ((c->processor_id & 0xff) == PRID_REV_ENCODE_332(2, 4, 0))
+		if (rev == PRID_REV_ENCODE_332(2, 4, 0))
 			write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
-	if (((c->processor_id & 0xff00) == PRID_IMP_1074K) &&
-	    ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(1, 1, 0))) {
+		break;
+	case PRID_IMP_1074K:
+		if (rev <= PRID_REV_ENCODE_332(1, 1, 0)) {
 			c->dcache.flags |= MIPS_CACHE_VTAG;
 			write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
 		}
+		break;
+	default:
+		BUG();
+	}
 }
 
 static char *way_string[] = { NULL, "direct mapped", "2-way",
@@ -809,7 +825,7 @@ static void probe_pcache(void)
 	unsigned long config1;
 	unsigned int lsize;
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_R4600:			/* QED style two way caches? */
 	case CPU_R4700:
 	case CPU_R5000:
@@ -1025,7 +1041,8 @@ static void probe_pcache(void)
 	 * presumably no vendor is shipping his hardware in the "bad"
 	 * configuration.
 	 */
-	if ((prid & 0xff00) == PRID_IMP_R4000 && (prid & 0xff) < 0x40 &&
+	if ((prid & PRID_IMP_MASK) == PRID_IMP_R4000 &&
+	    (prid & PRID_REV_MASK) < PRID_REV_R4400 &&
 	    !(config & CONF_SC) && c->icache.linesz != 16 &&
 	    PAGE_SIZE <= 0x8000)
 		panic("Improper R4000SC processor configuration detected");
@@ -1045,7 +1062,7 @@ static void probe_pcache(void)
 	 * normally they'd suffer from aliases but magic in the hardware deals
 	 * with that for us so we don't need to take care ourselves.
 	 */
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_20KC:
 	case CPU_25KF:
 	case CPU_SB1:
@@ -1065,7 +1082,7 @@ static void probe_pcache(void)
 	case CPU_34K:
 	case CPU_74K:
 	case CPU_1004K:
-		if (c->cputype == CPU_74K)
+		if (current_cpu_type() == CPU_74K)
 			alias_74k_erratum(c);
 		if ((read_c0_config7() & (1 << 16))) {
 			/* effectively physically indexed dcache,
@@ -1078,7 +1095,7 @@ static void probe_pcache(void)
 			c->dcache.flags |= MIPS_CACHE_ALIASES;
 	}
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_20KC:
 		/*
 		 * Some older 20Kc chips doesn't have the 'VI' bit in
@@ -1207,7 +1224,7 @@ static void setup_scache(void)
 	 * processors don't have a S-cache that would be relevant to the
 	 * Linux memory management.
 	 */
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_R4000SC:
 	case CPU_R4000MC:
 	case CPU_R4400SC:
@@ -1384,9 +1401,8 @@ static void r4k_cache_error_setup(void)
 {
 	extern char __weak except_vec2_generic;
 	extern char __weak except_vec2_sb1;
-	struct cpuinfo_mips *c = &current_cpu_data;
 
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_SB1:
 	case CPU_SB1A:
 		set_uncached_handler(0x100, &except_vec2_sb1, 0x80);

arch/mips/mm/dma-default.c

@@ -18,6 +18,7 @@
 #include <linux/highmem.h>
 
 #include <asm/cache.h>
+#include <asm/cpu-type.h>
 #include <asm/io.h>
 
 #include <dma-coherence.h>

arch/mips/mm/page.c

@@ -18,6 +18,7 @@
 
 #include <asm/bugs.h>
 #include <asm/cacheops.h>
+#include <asm/cpu-type.h>
 #include <asm/inst.h>
 #include <asm/io.h>
 #include <asm/page.h>

arch/mips/mm/sc-mips.c

@@ -6,6 +6,7 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 
+#include <asm/cpu-type.h>
 #include <asm/mipsregs.h>
 #include <asm/bcache.h>
 #include <asm/cacheops.h>
@@ -71,7 +72,7 @@ static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
 	unsigned int tmp;
 
 	/* Check the bypass bit (L2B) */
-	switch (c->cputype) {
+	switch (current_cpu_type()) {
 	case CPU_34K:
 	case CPU_74K:
 	case CPU_1004K:

arch/mips/mm/tlb-r4k.c

@@ -16,6 +16,7 @@
 #include <linux/module.h>
 
 #include <asm/cpu.h>
+#include <asm/cpu-type.h>
 #include <asm/bootinfo.h>
 #include <asm/mmu_context.h>
 #include <asm/pgtable.h>

arch/mips/mm/tlbex.c

@@ -30,6 +30,7 @@
 #include <linux/cache.h>
 
 #include <asm/cacheflush.h>
+#include <asm/cpu-type.h>
 #include <asm/pgtable.h>
 #include <asm/war.h>
 #include <asm/uasm.h>

arch/mips/mti-malta/malta-time.c

@@ -27,6 +27,7 @@
 #include <linux/timex.h>
 #include <linux/mc146818rtc.h>
 
+#include <asm/cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
 #include <asm/hardirq.h>
@@ -76,7 +77,7 @@ static void __init estimate_frequencies(void)
 #endif
 
 #if defined (CONFIG_KVM_GUEST) && defined (CONFIG_KVM_HOST_FREQ)
-	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
 
 	/*
 	 * XXXKYMA: hardwire the CPU frequency to Host Freq/4
@@ -169,7 +170,7 @@ unsigned int get_c0_compare_int(void)
 
 void __init plat_time_init(void)
 {
-	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
 	unsigned int freq;
 
 	estimate_frequencies();

arch/mips/mti-sead3/sead3-time.c

@@ -7,6 +7,7 @@
  */
 #include <linux/init.h>
 
+#include <asm/cpu.h>
 #include <asm/setup.h>
 #include <asm/time.h>
 #include <asm/irq.h>
@@ -34,7 +35,7 @@ static void __iomem *status_reg = (void __iomem *)0xbf000410;
  */
 static unsigned int __init estimate_cpu_frequency(void)
 {
-	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int prid = read_c0_prid() & (PRID_COMP_MASK | PRID_IMP_MASK);
 	unsigned int tick = 0;
 	unsigned int freq;
 	unsigned int orig;

arch/mips/netlogic/xlr/fmn-config.c

@@ -36,6 +36,7 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 
+#include <asm/cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/netlogic/xlr/fmn.h>
 #include <asm/netlogic/xlr/xlr.h>
@@ -187,7 +188,7 @@ void xlr_board_info_setup(void)
 	int processor_id, num_core;
 
 	num_core = hweight32(nlm_current_node()->coremask);
-	processor_id = read_c0_prid() & 0xff00;
+	processor_id = read_c0_prid() & PRID_IMP_MASK;
 
 	setup_cpu_fmninfo(cpu, num_core);
 	switch (processor_id) {

arch/mips/oprofile/common.c

@@ -12,6 +12,7 @@
 #include <linux/oprofile.h>
 #include <linux/smp.h>
 #include <asm/cpu-info.h>
+#include <asm/cpu-type.h>
 
 #include "op_impl.h"
 

arch/mips/pci/pci-bcm1480.c

@@ -39,6 +39,7 @@
 #include <linux/mm.h>
 #include <linux/console.h>
 #include <linux/tty.h>
+#include <linux/vt.h>
 
 #include <asm/sibyte/bcm1480_regs.h>
 #include <asm/sibyte/bcm1480_scd.h>

arch/mips/sibyte/bcm1480/setup.c

@@ -22,6 +22,7 @@
 #include <linux/string.h>
 
 #include <asm/bootinfo.h>
+#include <asm/cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/io.h>
 #include <asm/sibyte/sb1250.h>
@@ -119,7 +120,7 @@ void __init bcm1480_setup(void)
 	uint64_t sys_rev;
 	int plldiv;
 
-	sb1_pass = read_c0_prid() & 0xff;
+	sb1_pass = read_c0_prid() & PRID_REV_MASK;
 	sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
 	soc_type = SYS_SOC_TYPE(sys_rev);
 	part_type = G_SYS_PART(sys_rev);

arch/mips/sibyte/sb1250/setup.c

@@ -22,6 +22,7 @@
 #include <linux/string.h>
 
 #include <asm/bootinfo.h>
+#include <asm/cpu.h>
 #include <asm/mipsregs.h>
 #include <asm/io.h>
 #include <asm/sibyte/sb1250.h>
@@ -182,7 +183,7 @@ void __init sb1250_setup(void)
 	int plldiv;
 	int bad_config = 0;
 
-	sb1_pass = read_c0_prid() & 0xff;
+	sb1_pass = read_c0_prid() & PRID_REV_MASK;
 	sys_rev = __raw_readq(IOADDR(A_SCD_SYSTEM_REVISION));
 	soc_type = SYS_SOC_TYPE(sys_rev);
 	soc_pass = G_SYS_REVISION(sys_rev);

arch/mips/sni/setup.c

@@ -25,6 +25,7 @@
 #endif
 
 #include <asm/bootinfo.h>
+#include <asm/cpu.h>
 #include <asm/io.h>
 #include <asm/reboot.h>
 #include <asm/sni.h>
@@ -173,7 +174,7 @@ void __init plat_mem_setup(void)
 		system_type = "RM300-Cxx";
 		break;
 	case SNI_BRD_PCI_DESKTOP:
-		switch (read_c0_prid() & 0xff00) {
+		switch (read_c0_prid() & PRID_IMP_MASK) {
 		case PRID_IMP_R4600:
 		case PRID_IMP_R4700:
 			system_type = "RM200-C20";

drivers/staging/octeon/ethernet-mem.c

@@ -48,13 +48,8 @@ static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements)
 	while (freed) {
 
 		struct sk_buff *skb = dev_alloc_skb(size + 256);
-		if (unlikely(skb == NULL)) {
-			pr_warning
-			    ("Failed to allocate skb for hardware pool %d\n",
-			     pool);
+		if (unlikely(skb == NULL))
 			break;
-		}
-
 		skb_reserve(skb, 256 - (((unsigned long)skb->data) & 0x7f));
 		*(struct sk_buff **)(skb->data - sizeof(void *)) = skb;
 		cvmx_fpa_free(skb->data, pool, DONT_WRITEBACK(size / 128));

drivers/staging/octeon/ethernet-rgmii.c

@@ -373,9 +373,7 @@ int cvm_oct_rgmii_init(struct net_device *dev)
 			 * Enable interrupts on inband status changes
 			 * for this port.
 			 */
-			gmx_rx_int_en.u64 =
-			    cvmx_read_csr(CVMX_GMXX_RXX_INT_EN
-					  (index, interface));
+			gmx_rx_int_en.u64 = 0;
 			gmx_rx_int_en.s.phy_dupx = 1;
 			gmx_rx_int_en.s.phy_link = 1;
 			gmx_rx_int_en.s.phy_spd = 1;

drivers/staging/octeon/ethernet-rx.c

@@ -303,6 +303,7 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
 			if (backlog > budget * cores_in_use && napi != NULL)
 				cvm_oct_enable_one_cpu();
 		}
+		rx_count++;
 
 		skb_in_hw = USE_SKBUFFS_IN_HW && work->word2.s.bufs == 1;
 		if (likely(skb_in_hw)) {
@@ -336,9 +337,6 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
 			 */
 			skb = dev_alloc_skb(work->len);
 			if (!skb) {
-				printk_ratelimited("Port %d failed to allocate "
-						   "skbuff, packet dropped\n",
-						   work->ipprt);
 				cvm_oct_free_work(work);
 				continue;
 			}
@@ -429,7 +427,6 @@ static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
 #endif
 				}
 				netif_receive_skb(skb);
-				rx_count++;
 			} else {
 				/* Drop any packet received for a device that isn't up */
 				/*