Skip to content

L
linux
Commit f0df584f authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'imx-dt64-6.6' of... 

Merge tag 'imx-dt64-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt

i.MX arm64 device tree chanage for 6.6:

- New board device trees: i.MX93 based MBa93xxLA SBC, DEBIX SOM A,
  Gateworks i.MX8MM and i.MX8MP Venice boards.
- Add HDMI audio and video support for i.MX8MM/N Beacon board.
- Add coresight trace support for i.MX8MQ SoC.
- Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties.
- Add sound card support for verdin-imx8mp devices.
- A couple of change from Frank Li to add CPU frequency table and
  thermal support for i.MX8QM SoC.
- Add L1 and L2 cache info for LS1028A SoC.
- A series of i.MX93 changes from Peng Fan t oadd thermal and CM33 core
  support.
- A few imx8mq-librem5 updates from Martin Kepplinger and
  Sebastian Krzyszkowiak.
- A series of imx8mp-phycore-som changes from Teresa Remmet to update
  regulators.
- A bunch of changes from Tim Harvey to update various Gateworks boards.
- A bunch of dtschema warning fixes from Fabio Estevam, Krzysztof
  Kozlowski, etc.
- Other small and random changes.

* tag 'imx-dt64-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (88 commits)
  arm64: dts: imx8mq-librem5-devkit: Drop power-supply
  arm64: dts: imx8mq-librem5-devkit: Mark buck2 as always on
  arm64: dts: imx8mm-beacon-baseboard: Remove usbotg2 pinctrl-names
  arm64: dts: imx8mm-emcon: Remove iomuxc pinctrl-names
  arm64: dts: imx8m-beacon-kit: Remove extra sound-sai entry
  arm64: dts: freescale: Add DEBIX SOM A and SOM A I/O Board support
  arm64: dts: imx8mp-debix: remove unused fec pinctrl node
  arm64: dts: imx8mp-debix-model-a: Remove invalid rtc property
  arm64: dts: imx8mp-msc-sm2s-ep1: Remove invalid sgtl5000 property
  arm64: dts: imx8m-venice: Pass "brcm,bcm4329-fmac"
  arm64: dts: imx8mp-evk: Add HDMI support
  arm64: dts: freescale: verdin-imx8mp: dev: add sound card
  arm64: dts: freescale: verdin-imx8mp: dahlia: add sound card
  arm64: dts: imx8mm-emcon: Fix the regulator names
  arm64: dts: imx: Pass a single BD71847 clock entry
  arm64: dts: ls1028a: add l1 and l2 cache info
  arm64: dts: imx8mm-phyboard-polis-rdk: Remove 'fsl,spi-num-chipselects'
  arm64: dts: imx8dxl-evk: Remove 'fsl,spi-num-chipselects'
  arm64: dts: freescale: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
  arm64: dts: tqma8mqnl: Add vcc supply to i2c eeproms
  ...

Link: https://lore.kernel.org/r/20230813133354.847010-5-shawnguo@kernel.orgSigned-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents a5c33782 60ac8a77
Hide whitespace changes
Inline Side-by-side
Showing with 5222 additions and 375 deletions
arch/arm64/boot/dts/freescale/Makefile
View file @ f0df584f
......@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7901.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7902.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7903.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7904.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw7905-0x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dahlia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-dev.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-verdin-nonwifi-yavia.dtb
......@@ -93,6 +94,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-som-a-bmb-08.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
......@@ -100,6 +102,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw73xx-2x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw7905-2x.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
......@@ -141,24 +146,31 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-iris-v2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
imx8mm-venice-gw72xx-0x-rs232-rts-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo
imx8mm-venice-gw72xx-0x-rs422-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs422.dtbo
imx8mm-venice-gw72xx-0x-rs485-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs485.dtbo
imx8mm-venice-gw73xx-0x-imx219-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-imx219.dtbo
imx8mm-venice-gw73xx-0x-rpidsi-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rpidsi.dtbo
imx8mm-venice-gw73xx-0x-rs232-rts-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs232-rts.dtbo
imx8mm-venice-gw73xx-0x-rs422-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs422.dtbo
imx8mm-venice-gw73xx-0x-rs485-dtbs := imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo
imx8mp-venice-gw74xx-rpidsi-dtbs := imx8mp-venice-gw74xx.dtb imx8mp-venice-gw74xx-rpidsi.dtbo
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rpidsi.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs232-rts.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs422.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs485.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-imx219.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rpidsi.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs232-rts.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs422.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw73xx-0x-rs485.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx-rpidsi.dtb
dtb-$(CONFIG_ARCH_S32) += s32g274a-evb.dtb
dtb-$(CONFIG_ARCH_S32) += s32g274a-rdb2.dtb
......
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dts
View file @ f0df584f
......@@ -56,10 +56,14 @@ qsgmii_phy3: ethernet-phy@10 {
};
&enetc_port2 {
nvmem-cells = <&base_mac_address 2>;
nvmem-cell-names = "mac-address";
status = "okay";
};
&enetc_port3 {
nvmem-cells = <&base_mac_address 3>;
nvmem-cell-names = "mac-address";
status = "okay";
};
......@@ -80,6 +84,8 @@ &mscc_felix_port0 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy0>;
phy-mode = "qsgmii";
nvmem-cells = <&base_mac_address 4>;
nvmem-cell-names = "mac-address";
status = "okay";
};
......@@ -88,6 +94,8 @@ &mscc_felix_port1 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy1>;
phy-mode = "qsgmii";
nvmem-cells = <&base_mac_address 5>;
nvmem-cell-names = "mac-address";
status = "okay";
};
......@@ -96,6 +104,8 @@ &mscc_felix_port2 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy2>;
phy-mode = "qsgmii";
nvmem-cells = <&base_mac_address 6>;
nvmem-cell-names = "mac-address";
status = "okay";
};
......@@ -104,6 +114,8 @@ &mscc_felix_port3 {
managed = "in-band-status";
phy-handle = <&qsgmii_phy3>;
phy-mode = "qsgmii";
nvmem-cells = <&base_mac_address 7>;
nvmem-cell-names = "mac-address";
status = "okay";
};
......
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
View file @ f0df584f
......@@ -55,5 +55,7 @@ &enetc_port0 {
&enetc_port1 {
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
nvmem-cells = <&base_mac_address 0>;
nvmem-cell-names = "mac-address";
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts
View file @ f0df584f
......@@ -36,10 +36,14 @@ &enetc_port0 {
};
&enetc_port2 {
nvmem-cells = <&base_mac_address 2>;
nvmem-cell-names = "mac-address";
status = "okay";
};
&enetc_port3 {
nvmem-cells = <&base_mac_address 3>;
nvmem-cell-names = "mac-address";
status = "okay";
};
......@@ -52,6 +56,8 @@ &mscc_felix_port0 {
managed = "in-band-status";
phy-handle = <&phy0>;
phy-mode = "sgmii";
nvmem-cells = <&base_mac_address 0>;
nvmem-cell-names = "mac-address";
status = "okay";
};
......@@ -60,6 +66,8 @@ &mscc_felix_port1 {
managed = "in-band-status";
phy-handle = <&phy1>;
phy-mode = "sgmii";
nvmem-cells = <&base_mac_address 1>;
nvmem-cell-names = "mac-address";
status = "okay";
};
......
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
View file @ f0df584f
......@@ -43,5 +43,7 @@ vddh: vddh-regulator {
&enetc_port1 {
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
nvmem-cells = <&base_mac_address 1>;
nvmem-cell-names = "mac-address";
status = "okay";
};
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
View file @ f0df584f
......@@ -92,6 +92,8 @@ &enetc_port0 {
phy-handle = <&phy0>;
phy-mode = "sgmii";
managed = "in-band-status";
nvmem-cells = <&base_mac_address 0>;
nvmem-cell-names = "mac-address";
status = "okay";
};
......@@ -154,6 +156,21 @@ partition@3e0000 {
label = "bootloader environment";
};
};
otp-1 {
compatible = "user-otp";
nvmem-layout {
compatible = "kontron,sl28-vpd";
serial_number: serial-number {
};
base_mac_address: base-mac-address {
#nvmem-cell-cells = <1>;
};
};
};
};
};
......
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
View file @ f0df584f
......@@ -28,6 +28,12 @@ cpu0: cpu@0 {
reg = <0x0>;
enable-method = "psci";
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
......@@ -39,6 +45,12 @@ cpu1: cpu@1 {
reg = <0x1>;
enable-method = "psci";
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
i-cache-size = <0xc000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
......@@ -48,6 +60,9 @@ l2: l2-cache {
compatible = "cache";
cache-level = <2>;
cache-unified;
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>;
};
};
......
arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
View file @ f0df584f
......@@ -69,7 +69,7 @@ mdio-mux-emi1@54 {
mdio-parent-bus = <&emdio1>;
reg = <0x54 1>; /* BRDCFG4 */
mux-mask = <0xe0>; /* EMI1_MDIO */
#address-cells=<1>;
#address-cells = <1>;
#size-cells = <0>;
/* Child MDIO buses, one for each riser card:
......
arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
View file @ f0df584f
......@@ -684,15 +684,15 @@ &lsio_pwm3 {
};
/* Messaging Units */
&mu_m0{
&mu_m0 {
status = "okay";
};
&mu1_m0{
&mu1_m0 {
status = "okay";
};
&mu2_m0{
&mu2_m0 {
status = "okay";
};
......
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
View file @ f0df584f
......@@ -157,12 +157,10 @@ usbotg3: usb@5b110000 {
usbotg3_cdns3: usb@5b120000 {
compatible = "cdns,usb3";
reg = <0x5b130000 0x10000>, /* memory area for HOST registers */
<0x5b140000 0x10000>, /* memory area for DEVICE registers */
<0x5b120000 0x10000>; /* memory area for OTG/DRD registers */
reg-names = "xhci", "dev", "otg";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x5b120000 0x10000>, /* memory area for OTG/DRD registers */
<0x5b130000 0x10000>, /* memory area for HOST registers */
<0x5b140000 0x10000>; /* memory area for DEVICE registers */
reg-names = "otg", "xhci", "dev";
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
......
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
View file @ f0df584f
......@@ -362,7 +362,6 @@ &usdhc2 {
};
&lpspi3 {
fsl,spi-num-chipselects = <1>;
fsl,spi-only-use-cs1-sel;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lpspi3>;
......
arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
View file @ f0df584f
......@@ -36,22 +36,22 @@ &i2c3 {
};
&lpuart0 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
};
&lpuart1 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
};
&lpuart2 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
};
&lpuart3 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
};
......
arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
View file @ f0df584f
......@@ -141,11 +141,11 @@ &i2c2 {
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
camera@3c {
camera@10 {
compatible = "ovti,ov5640";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ov5640>;
reg = <0x3c>;
reg = <0x10>;
clocks = <&clk IMX8MM_CLK_CLKO1>;
clock-names = "xclk";
assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
......@@ -289,7 +289,6 @@ &usbotg1 {
};
&usbotg2 {
pinctrl-names = "default";
disable-over-current;
dr_mode = "host";
status = "okay";
......
arch/arm64/boot/dts/freescale/imx8mm-beacon-kit.dts
View file @ f0df584f
......@@ -16,4 +16,135 @@ / {
chosen {
stdout-path = &uart2;
};
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&adv7535_out>;
};
};
};
reg_hdmi: regulator-hdmi-dvdd {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_hdmi>;
regulator-name = "hdmi_pwr_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <70000>;
regulator-always-on;
};
sound-hdmi {
compatible = "simple-audio-card";
simple-audio-card,name = "sound-hdmi";
simple-audio-card,format = "i2s";
simple-audio-card,cpu {
sound-dai = <&sai5>;
system-clock-direction-out;
};
simple-audio-card,codec {
sound-dai = <&adv_bridge>;
};
};
};
&i2c2 {
adv_bridge: hdmi@3d {
compatible = "adi,adv7535";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hdmi_bridge>;
reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
reg-names = "main", "cec", "edid", "packet";
adi,dsi-lanes = <4>;
avdd-supply = <&reg_hdmi>;
a2vdd-supply = <&reg_hdmi>;
dvdd-supply = <&reg_hdmi>;
pvdd-supply = <&reg_hdmi>;
v1p2-supply = <&reg_hdmi>;
v3p3-supply = <&reg_hdmi>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
#sound-dai-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7535_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
port@1 {
reg = <1>;
adv7535_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
};
&lcdif {
status = "okay";
};
&mipi_dsi {
samsung,esc-clock-frequency = <20000000>;
status = "okay";
ports {
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&adv7535_in>;
};
};
};
};
&sai5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai5>;
assigned-clocks = <&clk IMX8MM_CLK_SAI5>;
assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
assigned-clock-rates = <24576000>;
#sound-dai-cells = <0>;
status = "okay";
};
&iomuxc {
pinctrl_hdmi_bridge: hdmibridgegrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
>;
};
pinctrl_reg_hdmi: reghdmigrp {
fsl,pins = <
MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x16
>;
};
pinctrl_sai5: sai5grp {
fsl,pins = <
MX8MM_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6
MX8MM_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6
MX8MM_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6
>;
};
};
arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
View file @ f0df584f
......@@ -112,7 +112,7 @@ pmic@4b {
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clocks = <&osc_32k>;
clock-output-names = "clk-32k-out";
regulators {
......
arch/arm64/boot/dts/freescale/imx8mm-emcon.dtsi
View file @ f0df584f
......@@ -108,8 +108,6 @@ flash0: flash@0 {
};
&iomuxc {
pinctrl-names = "default";
pinctrl_csi_pwn: csi-pwn-grp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19
......@@ -411,7 +409,7 @@ bd71847: pmic@4b {
regulators {
buck1_reg: BUCK1 {
regulator-name = "BUCK1";
regulator-name = "buck1";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
......@@ -420,7 +418,7 @@ buck1_reg: BUCK1 {
};
buck2_reg: BUCK2 {
regulator-name = "BUCK2";
regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
......@@ -432,7 +430,7 @@ buck2_reg: BUCK2 {
buck3_reg: BUCK3 {
// BUCK5 in datasheet
regulator-name = "BUCK3";
regulator-name = "buck3";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1350000>;
regulator-boot-on;
......@@ -441,7 +439,7 @@ buck3_reg: BUCK3 {
buck4_reg: BUCK4 {
// BUCK6 in datasheet
regulator-name = "BUCK4";
regulator-name = "buck4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
......@@ -450,7 +448,7 @@ buck4_reg: BUCK4 {
buck5_reg: BUCK5 {
// BUCK7 in datasheet
regulator-name = "BUCK5";
regulator-name = "buck5";
regulator-min-microvolt = <1605000>;
regulator-max-microvolt = <1995000>;
regulator-boot-on;
......@@ -459,7 +457,7 @@ buck5_reg: BUCK5 {
buck6_reg: BUCK6 {
// BUCK8 in datasheet
regulator-name = "BUCK6";
regulator-name = "buck6";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-boot-on;
......@@ -467,7 +465,7 @@ buck6_reg: BUCK6 {
};
ldo1_reg: LDO1 {
regulator-name = "LDO1";
regulator-name = "ldo1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <1900000>;
regulator-boot-on;
......@@ -475,7 +473,7 @@ ldo1_reg: LDO1 {
};
ldo2_reg: LDO2 {
regulator-name = "LDO2";
regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
......@@ -483,7 +481,7 @@ ldo2_reg: LDO2 {
};
ldo3_reg: LDO3 {
regulator-name = "LDO3";
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
......@@ -491,7 +489,7 @@ ldo3_reg: LDO3 {
};
ldo4_reg: LDO4 {
regulator-name = "LDO4";
regulator-name = "ldo4";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
......@@ -499,7 +497,7 @@ ldo4_reg: LDO4 {
};
ldo6_reg: LDO6 {
regulator-name = "LDO6";
regulator-name = "ldo6";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
......
arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
View file @ f0df584f
......@@ -380,6 +380,11 @@ typec1_con: connector {
};
};
&csi {
status = "okay";
};
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
......@@ -393,12 +398,47 @@ pca6416: gpio@20 {
#gpio-cells = <2>;
vcc-supply = <&buck4_reg>;
};
camera@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_camera>;
clocks = <&clk IMX8MM_CLK_CLKO1>;
clock-names = "xclk";
assigned-clocks = <&clk IMX8MM_CLK_CLKO1>;
assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
assigned-clock-rates = <24000000>;
powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
port {
ov5640_to_mipi_csi2: endpoint {
remote-endpoint = <&imx8mm_mipi_csi_in>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
};
&lcdif {
status = "okay";
};
&mipi_csi {
status = "okay";
ports {
port@0 {
imx8mm_mipi_csi_in: endpoint {
remote-endpoint = <&ov5640_to_mipi_csi2>;
data-lanes = <1 2>;
};
};
};
};
&mipi_dsi {
samsung,esc-clock-frequency = <10000000>;
status = "okay";
......@@ -684,4 +724,12 @@ pinctrl_backlight: backlightgrp {
MX8MM_IOMUXC_GPIO1_IO01_PWM1_OUT 0x06
>;
};
pinctrl_camera: cameragrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19
MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19
MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x59
>;
};
};
arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
View file @ f0df584f
......@@ -140,6 +140,26 @@ can0: can@0 {
};
};
/* TPM */
&ecspi2 {
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi2>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
tpm: tpm@0 {
compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm>;
reg = <0>;
spi-max-frequency = <43000000>;
};
};
&gpio1 {
gpio-line-names = "nINT_ETHPHY", "LED_RED", "WDOG_INT", "X_RTC_INT",
"", "", "", "RESET_ETHPHY",
......@@ -170,8 +190,11 @@ &gpio5 {
&i2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c4>;
pinctrl-1 = <&pinctrl_i2c4_gpio>;
sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
};
/* PCIe */
......@@ -333,6 +356,15 @@ MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x00
>;
};
pinctrl_ecspi2: ecspi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x80
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x80
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x80
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x00
>;
};
pinctrl_fan: fan0grp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x16
......@@ -346,6 +378,13 @@ MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c2
>;
};
pinctrl_i2c4_gpio: i2c4gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_I2C4_SCL_GPIO5_IO20 0x1e2
MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0x1e2
>;
};
pinctrl_leds: leds1grp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x16
......@@ -368,6 +407,12 @@ MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x40
>;
};
pinctrl_tpm: tpmgrp {
fsl,pins = <
MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11 0x140
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x00
......@@ -388,8 +433,8 @@ MX8MM_IOMUXC_SAI3_TXFS_UART2_DTE_TX 0x00
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x40
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x40
MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
>;
};
......
arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
View file @ f0df584f
......@@ -102,6 +102,8 @@ &flexspi {
status = "okay";
som_flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
......@@ -149,7 +151,6 @@ reg_nvcc_sd2: ldo2 {
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1800000>;
regulator-name = "NVCC_SD2 (LDO2)";
vselect-en;
regulator-state-mem {
regulator-off-in-suspend;
......
arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
View file @ f0df584f
......@@ -142,7 +142,7 @@ pmic@4b {
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clocks = <&osc_32k>;
clock-output-names = "clk-32k-out";
regulators {
......
arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx-0x-rpidsi.dtso 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include "imx8mm-pinfunc.h"
/dts-v1/;
/plugin/;
&{/} {
compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
panel {
compatible = "powertip,ph800480t013-idf02";
power-supply = <&attiny>;
backlight = <&attiny>;
port {
panel_in: endpoint {
remote-endpoint = <&bridge_out>;
};
};
};
};
&i2c3 {
#address-cells = <1>;
#size-cells = <0>;
attiny: regulator@45 {
compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
reg = <0x45>;
};
};
&lcdif {
status = "okay";
};
&mipi_dsi {
samsung,burst-clock-frequency = <891000000>;
samsung,esc-clock-frequency = <54000000>;
samsung,pll-clock-frequency = <27000000>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
bridge@0 {
compatible = "toshiba,tc358762";
reg = <0>;
vddc-supply = <&attiny>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
bridge_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
port@1 {
reg = <1>;
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&bridge_in>;
};
};
};
};
arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx-0x-rpidsi.dtso 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include "imx8mm-pinfunc.h"
/dts-v1/;
/plugin/;
&{/} {
compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm";
panel {
compatible = "powertip,ph800480t013-idf02";
power-supply = <&attiny>;
backlight = <&attiny>;
port {
panel_in: endpoint {
remote-endpoint = <&bridge_out>;
};
};
};
};
&i2c3 {
#address-cells = <1>;
#size-cells = <0>;
attiny: regulator@45 {
compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
reg = <0x45>;
};
};
&lcdif {
status = "okay";
};
&mipi_dsi {
samsung,burst-clock-frequency = <891000000>;
samsung,esc-clock-frequency = <54000000>;
samsung,pll-clock-frequency = <27000000>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
bridge@0 {
compatible = "toshiba,tc358762";
reg = <0>;
vddc-supply = <&attiny>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
bridge_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
port@1 {
reg = <1>;
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&bridge_in>;
};
};
};
};
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
View file @ f0df584f
......@@ -242,6 +242,22 @@ reg_wifi: regulator-wifi {
};
};
&A53_0 {
cpu-supply = <&buck2>;
};
&A53_1 {
cpu-supply = <&buck2>;
};
&A53_2 {
cpu-supply = <&buck2>;
};
&A53_3 {
cpu-supply = <&buck2>;
};
&ddrc {
operating-points-v2 = <&ddrc_opp_table>;
......@@ -496,7 +512,7 @@ pmic@4b {
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clocks = <&osc_32k>;
clock-output-names = "clk-32k-out";
regulators {
......@@ -511,7 +527,7 @@ BUCK1 {
};
/* vdd_arm: 0.805-1.0V (typ=0.9V) */
BUCK2 {
buck2: BUCK2 {
regulator-name = "buck2";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
......@@ -773,12 +789,21 @@ &usbotg2 {
/* SDIO WiFi */
&usdhc1 {
pinctrl-names = "default";
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <4>;
non-removable;
vmmc-supply = <&reg_wifi>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
wifi@0 {
compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
reg = <0>;
};
};
/* microSD */
......@@ -1038,6 +1063,28 @@ MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0
>;
};
pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4
>;
};
pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196
MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6
MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6
MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6
MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6
MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
......
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
View file @ f0df584f
......@@ -431,7 +431,7 @@ pmic@4b {
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clocks = <&osc_32k>;
clock-output-names = "clk-32k-out";
regulators {
......@@ -714,12 +714,21 @@ &usbotg2 {
/* SDIO WiFi */
&usdhc2 {
pinctrl-names = "default";
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
bus-width = <4>;
non-removable;
vmmc-supply = <&reg_wifi>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
wifi@0 {
compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
reg = <0>;
};
};
/* eMMC */
......@@ -992,6 +1001,28 @@ MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
......
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7903.dts
View file @ f0df584f
......@@ -416,7 +416,7 @@ pmic@4b {
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clocks = <&osc_32k>;
clock-output-names = "clk-32k-out";
regulators {
......
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7904.dts
View file @ f0df584f
......@@ -460,7 +460,7 @@ pmic@4b {
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clocks = <&osc_32k>;
clock-output-names = "clk-32k-out";
regulators {
......@@ -636,6 +636,8 @@ &pgc_mipi {
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
cts-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
status = "okay";
};
......@@ -646,13 +648,6 @@ &uart2 {
status = "okay";
};
/* off-board RS232 */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&usbotg1 {
dr_mode = "host";
disable-over-current;
......@@ -814,6 +809,8 @@ pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
MX8MM_IOMUXC_UART3_RXD_GPIO5_IO26 0x140 /* CTS# in */
MX8MM_IOMUXC_UART3_TXD_GPIO5_IO27 0x140 /* RTS# out */
>;
};
......@@ -824,13 +821,6 @@ MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140
MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
......
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905-0x.dts 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
/dts-v1/;
#include "imx8mm.dtsi"
#include "imx8mm-venice-gw700x.dtsi"
#include "imx8mm-venice-gw7905.dtsi"
/ {
model = "Gateworks Venice GW7905-0x i.MX8MM Development Kit";
compatible = "gateworks,imx8mm-gw7905-0x", "fsl,imx8mm";
chosen {
stdout-path = &uart2;
};
};
/* Disable SOM interfaces not used on baseboard */
&fec1 {
status = "disabled";
};
&usdhc1 {
status = "disabled";
};
arch/arm64/boot/dts/freescale/imx8mm-venice-gw7905.dtsi 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio4 2 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
pcie0_refclk: clock-pcie0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pps>;
gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
status = "okay";
};
reg_usb2_vbus: regulator-usb2-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb2_en>;
regulator-name = "usb2_vbus";
gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-name = "SD2_3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
&gpio1 {
gpio-line-names =
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "gpioa", "gpiob", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "";
};
&gpio4 {
gpio-line-names =
"", "", "", "pci_usb_sel",
"", "", "", "pci_wdis#",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "";
};
&gpio5 {
gpio-line-names =
"", "", "", "",
"gpioc", "gpiod", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "",
"", "", "", "";
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
eeprom@52 {
compatible = "atmel,24c32";
reg = <0x52>;
pagesize = <32>;
};
};
/* off-board header */
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
};
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
clock-names = "ref";
status = "okay";
};
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
/* GPS */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* USB1 - Type C front panel SINK port J14 */
&usbotg1 {
dr_mode = "peripheral";
status = "okay";
};
/* USB2 4-port USB3.0 HUB:
* P1 - USBC connector (host only)
* P2 - USB2 test connector
* P3 - miniPCIe full card
* P4 - miniPCIe half card
*/
&usbotg2 {
dr_mode = "host";
vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};
/* microSD */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_usdhc2_vmmc>;
bus-width = <4>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x40000040 /* GPIOA */
MX8MM_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x40000040 /* GPIOB */
MX8MM_IOMUXC_SAI1_RXD1_GPIO4_IO3 0x40000106 /* PCI_USBSEL */
MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x40000106 /* PCIE_WDIS# */
MX8MM_IOMUXC_SPDIF_EXT_CLK_GPIO5_IO5 0x40000040 /* GPIOD */
MX8MM_IOMUXC_SPDIF_RX_GPIO5_IO4 0x40000040 /* GPIOC */
>;
};
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0 0x6 /* LEDG */
MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2 0x6 /* LEDR */
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c2
MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c2
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c2
MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c2
>;
};
pinctrl_pcie0: pciegrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXD4_GPIO4_IO6 0x106
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5 0x106
>;
};
pinctrl_reg_usb2_en: regusb2grp {
fsl,pins = <
MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x6 /* USBHUB_RST# (ext p/u) */
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x40
>;
};
pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x140
MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x140
MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x140
MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x140
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140
MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc0
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc0
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc0
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x1c4
>;
};
};
arch/arm64/boot/dts/freescale/imx8mm.dtsi
View file @ f0df584f
......@@ -1345,8 +1345,8 @@ pcie0: pcie@33800000 {
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000 /* downstream I/O 64KB */
0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
<0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
num-lanes = <1>;
num-viewport = <4>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
......
arch/arm64/boot/dts/freescale/imx8mn-beacon-kit.dts
View file @ f0df584f
......@@ -16,4 +16,137 @@ / {
chosen {
stdout-path = &uart2;
};
connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&adv7535_out>;
};
};
};
reg_hdmi: regulator-hdmi-dvdd {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_hdmi>;
regulator-name = "hdmi_pwr_en";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
startup-delay-us = <70000>;
regulator-always-on;
};
sound-hdmi {
compatible = "simple-audio-card";
simple-audio-card,name = "sound-hdmi";
simple-audio-card,format = "i2s";
simple-audio-card,cpu {
sound-dai = <&sai5>;
system-clock-direction-out;
};
simple-audio-card,codec {
sound-dai = <&adv_bridge>;
};
};
};
&i2c2 {
adv_bridge: hdmi@3d {
compatible = "adi,adv7535";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hdmi_bridge>;
reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
reg-names = "main", "cec", "edid", "packet";
adi,dsi-lanes = <4>;
avdd-supply = <&reg_hdmi>;
a2vdd-supply = <&reg_hdmi>;
dvdd-supply = <&reg_hdmi>;
pvdd-supply = <&reg_hdmi>;
v1p2-supply = <&reg_hdmi>;
v3p3-supply = <&reg_hdmi>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
#sound-dai-cells = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7535_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
port@1 {
reg = <1>;
adv7535_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
};
&lcdif {
assigned-clocks = <&clk IMX8MN_VIDEO_PLL1>;
assigned-clock-rates = <594000000>;
status = "okay";
};
&mipi_dsi {
samsung,esc-clock-frequency = <20000000>;
status = "okay";
ports {
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&adv7535_in>;
};
};
};
};
&sai5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai5>;
assigned-clocks = <&clk IMX8MN_CLK_SAI5>;
assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
assigned-clock-rates = <24576000>;
#sound-dai-cells = <0>;
status = "okay";
};
&iomuxc {
pinctrl_hdmi_bridge: hdmibridgegrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
>;
};
pinctrl_reg_hdmi: reghdmigrp {
fsl,pins = <
MX8MN_IOMUXC_SD1_STROBE_GPIO2_IO11 0x16
>;
};
pinctrl_sai5: sai5grp {
fsl,pins = <
MX8MN_IOMUXC_SAI5_RXD3_SAI5_TX_DATA0 0xd6
MX8MN_IOMUXC_SAI5_RXD2_SAI5_TX_BCLK 0xd6
MX8MN_IOMUXC_SAI5_RXD1_SAI5_TX_SYNC 0xd6
>;
};
};
arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi
View file @ f0df584f
......@@ -121,7 +121,7 @@ pmic@4b {
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clocks = <&osc_32k>;
clock-output-names = "clk-32k-out";
regulators {
......
arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
View file @ f0df584f
......@@ -92,7 +92,7 @@ bd71847: pmic@4b {
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clocks = <&osc_32k>;
clock-output-names = "clk-32k-out";
regulators {
......
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
View file @ f0df584f
......@@ -60,7 +60,7 @@ pmic@4b {
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clocks = <&osc_32k>;
clock-output-names = "clk-32k-out";
regulators {
......
arch/arm64/boot/dts/freescale/imx8mn-evk.dts
View file @ f0df584f
......@@ -40,7 +40,7 @@ pmic: pmic@25 {
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
regulators {
buck1: BUCK1{
buck1: BUCK1 {
regulator-name = "VDD_SOC";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
......@@ -59,7 +59,7 @@ buck2: BUCK2 {
regulator-ramp-delay = <3125>;
};
buck4: BUCK4{
buck4: BUCK4 {
regulator-name = "VDD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
......@@ -67,7 +67,7 @@ buck4: BUCK4{
regulator-always-on;
};
buck5: BUCK5{
buck5: BUCK5 {
regulator-name = "VDD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
......
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
View file @ f0df584f
......@@ -23,6 +23,18 @@ status {
};
};
hdmi-connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&adv7533_out>;
};
};
};
memory@40000000 {
device_type = "memory";
reg = <0x0 0x40000000 0 0x80000000>;
......@@ -163,10 +175,45 @@ &i2c2 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c2>;
pinctrl-1 = <&pinctrl_i2c2_gpio>;
scl-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
hdmi@3d {
compatible = "adi,adv7535";
reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
reg-names = "main", "cec", "edid", "packet";
adi,dsi-lanes = <4>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7533_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
port@1 {
reg = <1>;
adv7533_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
ptn5110: tcpc@50 {
compatible = "nxp,ptn5110";
pinctrl-names = "default";
......@@ -212,6 +259,65 @@ pca6416: gpio@20 {
gpio-controller;
#gpio-cells = <2>;
};
camera@3c {
compatible = "ovti,ov5640";
reg = <0x3c>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_camera>;
clocks = <&clk IMX8MN_CLK_CLKO1>;
clock-names = "xclk";
assigned-clocks = <&clk IMX8MN_CLK_CLKO1>;
assigned-clock-parents = <&clk IMX8MN_CLK_24M>;
assigned-clock-rates = <24000000>;
powerdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
port {
ov5640_to_mipi_csi2: endpoint {
remote-endpoint = <&imx8mn_mipi_csi_in>;
clock-lanes = <0>;
data-lanes = <1 2>;
};
};
};
};
&isi {
status = "okay";
};
&mipi_csi {
status = "okay";
ports {
port@0 {
imx8mn_mipi_csi_in: endpoint {
remote-endpoint = <&ov5640_to_mipi_csi2>;
data-lanes = <1 2>;
};
};
};
};
&lcdif {
status = "okay";
};
&mipi_dsi {
samsung,esc-clock-frequency = <10000000>;
status = "okay";
ports {
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&adv7533_in>;
data-lanes = <1 2 3 4>;
};
};
};
};
&sai2 {
......@@ -326,6 +432,14 @@ &wdog1 {
};
&iomuxc {
pinctrl_camera: cameragrp {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19
MX8MN_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19
MX8MN_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1 0x59
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
......
arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi
View file @ f0df584f
......@@ -208,12 +208,14 @@ eeprom1: eeprom@53 {
read-only;
reg = <0x53>;
pagesize = <16>;
vcc-supply = <&reg_vcc3v3>;
};
eeprom0: eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
vcc-supply = <&reg_vcc3v3>;
};
};
......
arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dts
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Supports Symphony evaluation board versions >= 1.4a.
*
* Copyright 2019-2020 Variscite Ltd.
* Copyright (C) 2020 Krzysztof Kozlowski <krzk@kernel.org>
*/
/dts-v1/;
#include <dt-bindings/usb/pd.h>
#include "imx8mn-var-som.dtsi"
/ {
......@@ -100,14 +103,26 @@ enet-sel-hog {
};
};
/*
* For Symphony board version <= 1.4, the PTN5150 IRQ pin is connected
* to GPIO1_IO11 on the SoM (R106 present, R132 absent). From Symphony
* board version >= 1.4a, the PTN5150 ID pin is connected to GPIO1_IO11
* on the SoM (R106 absent, R132 present).
*/
extcon_usbotg1: typec@3d {
compatible = "nxp,ptn5150";
reg = <0x3d>;
interrupt-parent = <&gpio1>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ptn5150>;
status = "okay";
port {
typec1_dr_sw: endpoint {
remote-endpoint = <&usb1_drd_sw>;
};
};
};
};
......@@ -148,8 +163,21 @@ &uart3 {
};
&usbotg1 {
dr_mode = "otg";
hnp-disable;
srp-disable;
adp-disable;
usb-role-switch;
disable-over-current;
extcon = <&extcon_usbotg1>, <&extcon_usbotg1>;
samsung,picophy-pre-emp-curr-control = <3>;
samsung,picophy-dc-vol-level-adjust = <7>;
status = "okay";
port {
usb1_drd_sw: endpoint {
remote-endpoint = <&typec1_dr_sw>;
};
};
};
&iomuxc {
......
arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
View file @ f0df584f
......@@ -429,7 +429,7 @@ pmic@4b {
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
rohm,reset-snvs-powered;
#clock-cells = <0>;
clocks = <&osc_32k 0>;
clocks = <&osc_32k>;
clock-output-names = "clk-32k-out";
regulators {
......@@ -667,12 +667,21 @@ &usbotg1 {
/* SDIO WiFi */
&usdhc2 {
pinctrl-names = "default";
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
bus-width = <4>;
non-removable;
vmmc-supply = <&reg_wifi>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
wifi@0 {
compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
reg = <0>;
};
};
/* eMMC */
......@@ -923,6 +932,28 @@ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190
......
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
View file @ f0df584f
......@@ -129,7 +129,7 @@ buck2: BUCK2 {
nxp,dvs-standby-voltage = <850000>;
};
buck4: BUCK4{
buck4: BUCK4 {
regulator-name = "BUCK4";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
......@@ -137,7 +137,7 @@ buck4: BUCK4{
regulator-always-on;
};
buck5: BUCK5{
buck5: BUCK5 {
regulator-name = "BUCK5";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
......@@ -226,7 +226,6 @@ rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
#clock-cells = <0>;
clock-frequency = <32768>;
clock-output-names = "xin32k";
interrupt-parent = <&gpio2>;
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
......@@ -355,28 +354,6 @@ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x1f
MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x1f
MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19
>;
};
pinctrl_gpio_led: gpioledgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19
......
arch/arm64/boot/dts/freescale/imx8mp-debix-som-a-bmb-08.dts 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2019 NXP
* Copyright (C) 2023 Pengutronix, Marco Felsch <kernel@pengutronix.de>
*/
/dts-v1/;
#include "imx8mp-debix-som-a.dtsi"
/ {
model = "Polyhex i.MX8MPlus Debix SOM A on BMB-08";
compatible = "polyhex,imx8mp-debix-som-a-bmb-08", "polyhex,imx8mp-debix-som-a",
"fsl,imx8mp";
aliases {
ethernet0 = &eqos;
ethernet1 = &fec;
};
chosen {
stdout-path = &uart2;
};
reg_baseboard_vdd3v3: regulator-baseboard-vdd3v3 {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "BB_VDD3V3";
/* Required timings for ethernet phy's */
startup-delay-us = <50000>;
off-on-delay-us = <110000>;
gpio = <&expander0 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_baseboard_vdd5v0: regulator-baseboard-vdd5v0 {
compatible = "regulator-fixed";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "BB_VDD5V";
gpio = <&expander0 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
regulator-som-vdd1v8 {
compatible = "regulator-fixed";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "SOM_VDD1V8_SW";
gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
regulator-som-vdd3v3 {
compatible = "regulator-fixed";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "SOM_VDD3V3_SW";
gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
regulator-vbus-usb20 {
compatible = "regulator-fixed";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "USB20_5V";
gpio = <&expander1 14 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
vin-supply = <&reg_baseboard_vdd5v0>;
};
regulator-vbus-usb30 {
compatible = "regulator-fixed";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "USB30_5V";
gpio = <&expander1 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
vin-supply = <&reg_baseboard_vdd5v0>;
};
reg_vdd5v0: regulator-vdd5v0 {
compatible = "regulator-fixed";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-name = "VDD_5V";
gpio = <&expander0 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
nvmem-cells = <&ethmac1>;
nvmem-cell-names = "mac-address";
phy-supply = <&reg_baseboard_vdd3v3>;
phy-handle = <&ethphy0>;
phy-mode = "rgmii-id";
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
ethphy0: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
reset-assert-us = <20000>;
reset-deassert-us = <150000>;
eee-broken-1000t;
realtek,clkout-disable;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
nvmem-cells = <&ethmac2>;
nvmem-cell-names = "mac-address";
phy-supply = <&reg_baseboard_vdd3v3>;
phy-handle = <&ethphy1>;
phy-mode = "rgmii-id";
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
ethphy1: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
reset-assert-us = <20000>;
reset-deassert-us = <150000>;
eee-broken-1000t;
realtek,clkout-disable;
};
};
};
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <&reg_vdd5v0>;
status = "okay";
};
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&reg_vdd5v0>;
status = "okay";
};
&flexspi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi0>;
status = "okay";
flash: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
#address-cells = <1>;
#size-cells = <1>;
};
};
&i2c4 {
expander0: gpio@20 {
compatible = "nxp,pca9535";
reg = <0x20>;
gpio-controller;
#gpio-cells = <0x02>;
};
expander1: gpio@23 {
compatible = "nxp,pca9535";
reg = <0x23>;
gpio-controller;
#gpio-cells = <0x02>;
/*
* Since USB1 is bound to peripheral mode we need to ensure
* that VBUS is turned off.
*/
usb30-otg-hog {
gpio-hog;
gpios = <13 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "USB30_OTG_EN";
};
};
rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rtc>;
interrupt-parent = <&gpio4>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
#clock-cells = <0>;
};
eeprom@52 {
compatible = "atmel,24c02";
reg = <0x52>;
pagesize = <16>;
#address-cells = <1>;
#size-cells = <0>;
/* MACs stored in ASCII */
ethmac1: mac-address@0 {
reg = <0x0 0xc>;
};
ethmac2: mac-address@c {
reg = <0xc 0xc>;
};
};
};
&snvs_pwrkey {
status = "okay";
};
/* Debug */
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
&usb3_0 {
status = "okay";
};
&usb3_1 {
status = "okay";
};
&usb_dwc3_0 {
dr_mode = "peripheral";
status = "okay";
};
&usb_dwc3_1 {
dr_mode = "host";
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
/* 2.x hub on port 1 */
usb_hub_2_x: hub@1 {
compatible = "usb5e3,610";
reg = <1>;
reset-gpios = <&expander1 9 GPIO_ACTIVE_LOW>;
vdd-supply = <&reg_vdd5v0>;
peer-hub = <&usb_hub_3_x>;
};
/* 3.x hub on port 2 */
usb_hub_3_x: hub@2 {
compatible = "usb5e3,620";
reg = <2>;
reset-gpios = <&expander1 9 GPIO_ACTIVE_LOW>;
vdd-supply = <&reg_vdd5v0>;
peer-hub = <&usb_hub_2_x>;
};
};
&usb3_phy0 {
status = "okay";
};
&usb3_phy1 {
status = "okay";
};
/* µSD Card */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
assigned-clock-rates = <400000000>;
vmmc-supply = <&reg_usdhc2_vmmc>;
bus-width = <4>;
disable-wp;
no-sdio;
no-mmc;
status = "okay";
};
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x1f
MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x1f
MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154
MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x154
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154
MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
>;
};
pinctrl_flexspi0: flexspi0grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2
MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82
MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82
MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82
MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82
MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
>;
};
pinctrl_rtc: rtcgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x140
>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x14f
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x14f
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x49
MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x49
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49
MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
};
arch/arm64/boot/dts/freescale/imx8mp-debix-som-a.dtsi 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2019 NXP
* Copyright (C) 2023 Pengutronix, Marco Felsch <kernel@pengutronix.de>
*/
#include "imx8mp.dtsi"
/ {
model = "Polyhex i.MX8MPlus Debix SOM A";
compatible = "polyhex,imx8mp-debix-som-a", "fsl,imx8mp";
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&A53_0 {
cpu-supply = <&buck2>;
};
&A53_1 {
cpu-supply = <&buck2>;
};
&A53_2 {
cpu-supply = <&buck2>;
};
&A53_3 {
cpu-supply = <&buck2>;
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic@25 {
compatible = "nxp,pca9450c";
reg = <0x25>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio1>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
regulators {
buck1: BUCK1 {
regulator-name = "BUCK1";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
buck2: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
nxp,dvs-run-voltage = <950000>;
nxp,dvs-standby-voltage = <850000>;
};
buck4: BUCK4 {
regulator-name = "BUCK4";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
buck5: BUCK5 {
regulator-name = "BUCK5";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
buck6: BUCK6 {
regulator-name = "BUCK6";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
};
ldo1: LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo2: LDO2 {
regulator-name = "LDO2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
};
ldo3: LDO3 {
regulator-name = "LDO3";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo4: LDO4 {
regulator-name = "LDO4";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo5: LDO5 {
regulator-name = "LDO5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
&i2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
adc@48 {
compatible = "ti,ads1115";
reg = <0x48>;
#address-cells = <1>;
#size-cells = <0>;
channel@4 {
reg = <4>;
ti,gain = <1>;
ti,datarate = <7>;
};
channel@5 {
reg = <5>;
ti,gain = <1>;
ti,datarate = <7>;
};
channel@6 {
reg = <6>;
ti,gain = <1>;
ti,datarate = <7>;
};
channel@7 {
reg = <7>;
ti,gain = <1>;
ti,datarate = <7>;
};
};
};
&snvs_pwrkey {
status = "okay";
};
/* eMMC */
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
assigned-clock-rates = <400000000>;
bus-width = <8>;
non-removable;
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3
MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3
>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x41
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x41
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
>;
};
};
arch/arm64/boot/dts/freescale/imx8mp-evk.dts
View file @ f0df584f
......@@ -16,6 +16,18 @@ chosen {
stdout-path = &uart2;
};
hdmi-connector {
compatible = "hdmi-connector";
label = "hdmi";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&adv7533_out>;
};
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
......@@ -378,6 +390,40 @@ &i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
hdmi@3d {
compatible = "adi,adv7535";
reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
reg-names = "main", "cec", "edid", "packet";
adi,dsi-lanes = <4>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7533_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
port@1 {
reg = <1>;
adv7533_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
};
};
};
&i2c3 {
......@@ -443,6 +489,26 @@ &i2c5 {
*/
};
&lcdif1 {
status = "okay";
};
&mipi_dsi {
samsung,esc-clock-frequency = <10000000>;
status = "okay";
ports {
port@1 {
reg = <1>;
dsi_out: endpoint {
remote-endpoint = <&adv7533_in>;
data-lanes = <1 2 3 4>;
};
};
};
};
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
clocks = <&pcie0_refclk>;
......
arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
View file @ f0df584f
......@@ -55,7 +55,6 @@ sgtl5000: audio-codec@a {
assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
assigned-clock-rates = <24000000>;
clocks = <&clk IMX8MP_CLK_CLKOUT1>;
clock-names = "mclk";
#sound-dai-cells = <0>;
VDDA-supply = <&reg_vcc_3v3_audio>;
......
arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s.dtsi
View file @ f0df584f
......@@ -109,7 +109,7 @@ extcon_usb0: extcon-usb0 {
compatible = "linux,extcon-usb-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0_extcon>;
id-gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
id-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
};
};
......
arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
View file @ f0df584f
......@@ -76,15 +76,15 @@ leds@62 {
compatible = "nxp,pca9533";
reg = <0x62>;
led1 {
led-1 {
type = <PCA9532_TYPE_LED>;
};
led2 {
led-2 {
type = <PCA9532_TYPE_LED>;
};
led3 {
led-3 {
type = <PCA9532_TYPE_LED>;
};
};
......@@ -103,6 +103,8 @@ &uart1 {
/* SD-Card */
&usdhc2 {
assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
assigned-clock-rates = <200000000>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>;
......
arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
View file @ f0df584f
......@@ -42,8 +42,8 @@ &A53_3 {
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy1>;
phy-mode = "rgmii-id";
fsl,magic-packet;
status = "okay";
......@@ -54,14 +54,12 @@ mdio {
ethphy1: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
enet-phy-lane-no-swap;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,min-output-impedance;
enet-phy-lane-no-swap;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
};
};
};
......@@ -75,8 +73,8 @@ som_flash: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <80000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
};
};
......@@ -85,89 +83,85 @@ &i2c1 {
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-1 = <&pinctrl_i2c1_gpio>;
sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
pmic: pmic@25 {
reg = <0x25>;
compatible = "nxp,pca9450c";
reg = <0x25>;
interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio4>;
interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
regulators {
buck1: BUCK1 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <1000000>;
regulator-min-microvolt = <805000>;
regulator-name = "VDD_SOC (BUCK1)";
regulator-ramp-delay = <3125>;
};
buck2: BUCK2 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <2187500>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
nxp,dvs-run-voltage = <950000>;
nxp,dvs-standby-voltage = <850000>;
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <1050000>;
regulator-min-microvolt = <805000>;
regulator-name = "VDD_ARM (BUCK2)";
regulator-ramp-delay = <3125>;
};
buck4: BUCK4 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
regulator-name = "VDD_3V3 (BUCK4)";
};
buck5: BUCK5 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
regulator-name = "VDD_1V8 (BUCK5)";
};
buck6: BUCK6 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
regulator-boot-on;
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <1155000>;
regulator-min-microvolt = <1045000>;
regulator-name = "NVCC_DRAM_1V1 (BUCK6)";
};
ldo1: LDO1 {
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo2: LDO2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
regulator-always-on;
regulator-max-microvolt = <1950000>;
regulator-min-microvolt = <1710000>;
regulator-name = "NVCC_SNVS_1V8 (LDO1)";
};
ldo3: LDO3 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
ldo4: LDO4 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1800000>;
regulator-name = "VDDA_1V8 (LDO3)";
};
ldo5: LDO5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
regulator-boot-on;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1800000>;
regulator-name = "NVCC_SD2 (LDO5)";
};
};
};
......@@ -208,21 +202,20 @@ &wdog1 {
&iomuxc {
pinctrl_fec: fecgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x2
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x2
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x12
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x12
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x14
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x14
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x14
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x14
MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x11
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90
>;
};
......@@ -239,69 +232,69 @@ MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3
MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c2
MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c2
>;
};
pinctrl_i2c1_gpio: i2c1gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x1e3
MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x1e3
MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x1e2
MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x1e2
>;
};
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x141
MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x140
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
>;
};
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
>;
};
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d2
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d2
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d2
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d2
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d2
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d2
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d2
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d2
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d2
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d2
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d2
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
>;
};
......
arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx-2x.dts 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
/dts-v1/;
#include "imx8mp.dtsi"
#include "imx8mp-venice-gw702x.dtsi"
#include "imx8mp-venice-gw71xx.dtsi"
/ {
model = "Gateworks Venice GW71xx-2x i.MX8MP Development Kit";
compatible = "gateworks,imx8mp-gw71xx-2x", "fsl,imx8mp";
chosen {
stdout-path = &uart2;
};
};
arch/arm64/boot/dts/freescale/imx8mp-venice-gw71xx.dtsi 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
pcie0_refclk: clock-pcie0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pps>;
gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
&gpio4 {
gpio-line-names =
"", "", "", "",
"", "", "", "",
"dio1", "", "", "dio0",
"", "", "pci_usb_sel", "",
"", "", "", "",
"", "", "", "",
"dio3", "", "dio2", "",
"pci_wdis#", "", "", "";
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
accelerometer@19 {
compatible = "st,lis2de12";
reg = <0x19>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_accel>;
st,drdy-int-pin = <1>;
interrupt-parent = <&gpio4>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "INT1";
};
};
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
clock-names = "ref";
status = "okay";
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
status = "okay";
};
/* GPS */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* off-board header */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
/* USB1 Type-C front panel */
&usb3_0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
fsl,over-current-active-low;
status = "okay";
};
&usb3_phy0 {
status = "okay";
};
&usb_dwc3_0 {
/* dual role is implemented but not a full featured OTG */
adp-disable;
hnp-disable;
srp-disable;
dr_mode = "otg";
usb-role-switch;
role-switch-default-mode = "peripheral";
status = "okay";
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "Type-C";
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
};
};
/* USB2 - MiniPCIe socket */
&usb3_1 {
fsl,permanently-attached;
fsl,disable-port-power-control;
status = "okay";
};
&usb3_phy1 {
status = "okay";
};
&usb_dwc3_1 {
dr_mode = "host";
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08 0x40000146 /* DIO1 */
MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11 0x40000146 /* DIO0 */
MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x40000106 /* PCIE_USBSEL */
MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x40000146 /* DIO2 */
MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x40000146 /* DIO3 */
MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x40000106 /* PCIE_WDIS# */
>;
};
pinctrl_accel: accelgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x150 /* IRQ */
>;
};
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x6 /* LEDG */
MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x6 /* LEDR */
>;
};
pinctrl_pcie0: pcie0grp {
fsl,pins = <
MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x106
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x146
>;
};
pinctrl_usb1: usb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140 /* USB1_FLT# */
>;
};
pinctrl_usbcon1: usbcon1grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x140 /* USB1_ID */
>;
};
pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x140
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140
MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140
>;
};
};
arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx-2x.dts 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
/dts-v1/;
#include "imx8mp.dtsi"
#include "imx8mp-venice-gw702x.dtsi"
#include "imx8mp-venice-gw72xx.dtsi"
/ {
model = "Gateworks Venice GW72xx-2x i.MX8MP Development Kit";
compatible = "gateworks,imx8mp-gw72xx-2x", "fsl,imx8mp";
chosen {
stdout-path = &uart2;
};
};
arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
pcie0_refclk: clock-pcie0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pps>;
gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
reg_usb1_vbus: regulator-usb1 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb1_en>;
regulator-name = "usb1_vbus";
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usb2_vbus: regulator-usb2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb2_en>;
regulator-name = "usb2_vbus";
gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
regulator-name = "VDD_3V3_SD";
enable-active-high;
gpio = <&gpio2 19 0>; /* SD2_RESET */
off-on-delay-us = <12000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
startup-delay-us = <100>;
};
};
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
&gpio4 {
gpio-line-names =
"", "", "", "",
"", "", "", "",
"dio1", "", "", "dio0",
"", "", "pci_usb_sel", "",
"", "", "", "",
"", "", "rs485_en", "rs485_term",
"", "", "", "rs485_half",
"pci_wdis#", "", "", "";
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
accelerometer@19 {
compatible = "st,lis2de12";
reg = <0x19>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_accel>;
st,drdy-int-pin = <1>;
interrupt-parent = <&gpio4>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "INT1";
};
};
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
clock-names = "ref";
status = "okay";
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
status = "okay";
};
/* GPS */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* off-board header */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
/* RS232 */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
/* USB1 - OTG */
&usb3_0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
fsl,over-current-active-low;
status = "okay";
};
&usb3_phy0 {
vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
&usb_dwc3_0 {
/* dual role is implemented but not a full featured OTG */
adp-disable;
hnp-disable;
srp-disable;
dr_mode = "otg";
usb-role-switch;
role-switch-default-mode = "peripheral";
status = "okay";
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "otg";
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
};
};
/* USB2 - USB3.0 Hub */
&usb3_1 {
fsl,permanently-attached;
fsl,disable-port-power-control;
status = "okay";
};
&usb3_phy1 {
vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};
&usb_dwc3_1 {
dr_mode = "host";
status = "okay";
};
/* microSD */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
vmmc-supply = <&reg_usdhc2_vmmc>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08 0x40000146 /* DIO1 */
MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11 0x40000146 /* DIO0 */
MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x40000106 /* PCIE_USBSEL */
MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x40000106 /* RS485_HALF */
MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x40000106 /* RS485_EN */
MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x40000106 /* RS485_TERM */
MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x40000106 /* PCIE_WDIS# */
>;
};
pinctrl_accel: accelgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x150 /* IRQ */
>;
};
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x6 /* LEDG */
MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x6 /* LEDR */
>;
};
pinctrl_pcie0: pcie0grp {
fsl,pins = <
MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x106
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x146
>;
};
pinctrl_reg_usb1_en: regusb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x146 /* USB1_EN */
>;
};
pinctrl_usb1: usb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140 /* USB1_FLT# */
>;
};
pinctrl_usbcon1: usbcon1grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x140 /* USB1_ID */
>;
};
pinctrl_reg_usb2_en: regusb2grp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x146 /* USBHUB_RST# */
>;
};
pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x140
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140
MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140
MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B 0x1d0
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
>;
};
};
arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx-2x.dts 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
/dts-v1/;
#include "imx8mp.dtsi"
#include "imx8mp-venice-gw702x.dtsi"
#include "imx8mp-venice-gw73xx.dtsi"
/ {
model = "Gateworks Venice GW73xx-2x i.MX8MP Development Kit";
compatible = "gateworks,imx8mp-gw73xx-2x", "fsl,imx8mp";
chosen {
stdout-path = &uart2;
};
};
arch/arm64/boot/dts/freescale/imx8mp-venice-gw73xx.dtsi 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
pcie0_refclk: clock-pcie0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pps>;
gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
reg_usb1_vbus: regulator-usb1 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb1_en>;
regulator-name = "usb1_vbus";
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usb2_vbus: regulator-usb2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usb2_en>;
regulator-name = "usb2_vbus";
gpio = <&gpio4 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_wifi_en: regulator-wifi-en {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_wl>;
regulator-name = "wl";
gpio = <&gpio4 19 GPIO_ACTIVE_HIGH>;
startup-delay-us = <100>;
enable-active-high;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
regulator-name = "VDD_3V3_SD";
enable-active-high;
gpio = <&gpio2 19 0>; /* SD2_RESET */
off-on-delay-us = <12000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <3300000>;
startup-delay-us = <100>;
};
};
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
&gpio4 {
gpio-line-names =
"", "", "", "",
"", "", "", "",
"dio1", "", "", "dio0",
"", "", "pci_usb_sel", "",
"", "", "", "",
"", "", "rs485_en", "rs485_term",
"", "", "", "rs485_half",
"pci_wdis#", "", "", "";
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
accelerometer@19 {
compatible = "st,lis2de12";
reg = <0x19>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_accel>;
st,drdy-int-pin = <1>;
interrupt-parent = <&gpio4>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "INT1";
};
};
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
clock-names = "ref";
status = "okay";
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
status = "okay";
};
/* GPS */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* bluetooth HCI */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_bten>;
cts-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
rts-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
bluetooth {
compatible = "brcm,bcm4330-bt";
shutdown-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
};
};
/* RS232 */
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "okay";
};
/* USB1 - OTG */
&usb3_0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
fsl,over-current-active-low;
status = "okay";
};
&usb3_phy0 {
vbus-supply = <&reg_usb1_vbus>;
status = "okay";
};
&usb_dwc3_0 {
/* dual role is implemented but not a full featured OTG */
adp-disable;
hnp-disable;
srp-disable;
dr_mode = "otg";
usb-role-switch;
role-switch-default-mode = "peripheral";
status = "okay";
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "otg";
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
};
};
/* USB2 - USB3.0 Hub */
&usb3_1 {
fsl,permanently-attached;
fsl,disable-port-power-control;
status = "okay";
};
&usb3_phy1 {
vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};
&usb_dwc3_1 {
dr_mode = "host";
status = "okay";
};
/* SDIO WiFi */
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <4>;
non-removable;
vmmc-supply = <&reg_wifi_en>;
status = "okay";
};
/* microSD */
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
bus-width = <4>;
vmmc-supply = <&reg_usdhc2_vmmc>;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08 0x40000146 /* DIO1 */
MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11 0x40000146 /* DIO0 */
MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x40000106 /* PCIE_USBSEL */
MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x40000106 /* RS485_HALF */
MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x40000106 /* RS485_EN */
MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23 0x40000106 /* RS485_TERM */
MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x40000106 /* PCIE_WDIS# */
>;
};
pinctrl_accel: accelgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x150 /* IRQ */
>;
};
pinctrl_bten: btengrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16 0x146
>;
};
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x6 /* LEDG */
MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x6 /* LEDR */
>;
};
pinctrl_pcie0: pcie0grp {
fsl,pins = <
MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x106
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x146
>;
};
pinctrl_reg_wl: regwlgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x146
>;
};
pinctrl_reg_usb1_en: regusb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x146 /* USB1_EN */
>;
};
pinctrl_usb1: usb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140 /* USB1_FLT# */
>;
};
pinctrl_usbcon1: usbcon1grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x140 /* USB1_ID */
>;
};
pinctrl_reg_usb2_en: regusb2grp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_TXD0__GPIO4_IO12 0x146 /* USBHUB_RST# */
>;
};
pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x140
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140
MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140
MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08 0x140
MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x140
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140
MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_vmmc: usdhc2-vmmc-grp {
fsl,pins = <
MX8MP_IOMUXC_SD2_RESET_B__USDHC2_RESET_B 0x1d0
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
>;
};
};
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-rpidsi.dtso 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
/dts-v1/;
/plugin/;
&{/} {
compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp";
panel {
compatible = "powertip,ph800480t013-idf02";
power-supply = <&attiny>;
backlight = <&attiny>;
port {
panel_in: endpoint {
remote-endpoint = <&bridge_out>;
};
};
};
};
&i2c4 {
#address-cells = <1>;
#size-cells = <0>;
attiny: regulator@45 {
compatible = "raspberrypi,7inch-touchscreen-panel-regulator";
reg = <0x45>;
};
};
&lcdif1 {
status = "okay";
};
&mipi_dsi {
samsung,burst-clock-frequency = <891000000>;
samsung,esc-clock-frequency = <54000000>;
samsung,pll-clock-frequency = <27000000>;
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
bridge@0 {
compatible = "toshiba,tc358762";
reg = <0>;
vddc-supply = <&attiny>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
bridge_in: endpoint {
remote-endpoint = <&dsi_out>;
};
};
port@1 {
reg = <1>;
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
reg = <1>;
dsi_out: endpoint {
data-lanes = <1 2>;
remote-endpoint = <&bridge_in>;
};
};
};
};
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
View file @ f0df584f
......@@ -125,12 +125,22 @@ reg_usb2_vbus: regulator-usb2 {
regulator-max-microvolt = <5000000>;
};
reg_can1_stby: regulator-can1-stby {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_can1>;
regulator-name = "can1_stby";
gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_can2_stby: regulator-can2-stby {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_can>;
pinctrl-0 = <&pinctrl_reg_can2>;
regulator-name = "can2_stby";
gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
gpio = <&gpio5 5 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
......@@ -164,6 +174,21 @@ &A53_3 {
cpu-supply = <&reg_arm>;
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
status = "okay";
tpm@0 {
compatible = "tcg,tpm_tis-spi";
#address-cells = <0x1>;
#size-cells = <0x1>;
reg = <0x0>;
spi-max-frequency = <36000000>;
};
};
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
......@@ -204,6 +229,13 @@ fixed-link {
};
};
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <&reg_can1_stby>;
status = "okay";
};
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
......@@ -214,38 +246,38 @@ &flexcan2 {
&gpio1 {
gpio-line-names =
"", "", "", "", "", "", "", "",
"", "", "dio0", "", "dio1", "", "", "",
"", "dio0", "", "dio1", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio2 {
gpio-line-names =
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "pcie3_wdis#", "",
"", "", "", "", "", "", "m2_pin20", "",
"", "", "", "", "", "pcie1_wdis#", "pcie3_wdis#", "",
"", "", "pcie2_wdis#", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio3 {
gpio-line-names =
"m2_gdis#", "", "", "", "", "", "", "m2_rst#",
"", "", "", "", "", "", "m2_rst", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"m2_off#", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio4 {
gpio-line-names =
"", "", "m2_off#", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "m2_wdis#", "", "", "",
"", "", "", "", "", "", "", "uart_rs485";
"", "", "m2_wdis#", "", "", "", "", "",
"", "", "", "", "", "", "", "rs485_en";
};
&gpio5 {
gpio-line-names =
"uart_half", "uart_term", "", "", "", "", "", "",
"rs485_hd", "rs485_term", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
......@@ -268,6 +300,8 @@ gsc: gsc@20 {
interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <1>;
#size-cells = <0>;
adc {
compatible = "gw,gsc-adc";
......@@ -286,6 +320,12 @@ channel@8 {
label = "vdd_bat";
};
channel@16 {
gw,mode = <4>;
reg = <0x16>;
label = "fan_tach";
};
channel@82 {
gw,mode = <2>;
reg = <0x82>;
......@@ -358,6 +398,11 @@ channel@a2 {
gw,voltage-divider-ohms = <10000 10000>;
};
};
fan-controller@a {
compatible = "gw,gsc-fan";
reg = <0x0a>;
};
};
gpio: gpio@23 {
......@@ -369,85 +414,6 @@ gpio: gpio@23 {
interrupts = <4>;
};
pmic@25 {
compatible = "nxp,pca9450c";
reg = <0x25>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio3>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
regulators {
BUCK1 {
regulator-name = "BUCK1";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
reg_arm: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1025000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
nxp,dvs-run-voltage = <950000>;
nxp,dvs-standby-voltage = <850000>;
};
BUCK4 {
regulator-name = "BUCK4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3600000>;
regulator-boot-on;
regulator-always-on;
};
BUCK5 {
regulator-name = "BUCK5";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <1950000>;
regulator-boot-on;
regulator-always-on;
};
BUCK6 {
regulator-name = "BUCK6";
regulator-min-microvolt = <1045000>;
regulator-max-microvolt = <1155000>;
regulator-boot-on;
regulator-always-on;
};
LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <1950000>;
regulator-boot-on;
regulator-always-on;
};
LDO3 {
regulator-name = "LDO3";
regulator-min-microvolt = <1710000>;
regulator-max-microvolt = <1890000>;
regulator-boot-on;
regulator-always-on;
};
LDO5 {
regulator-name = "LDO5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
};
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
......@@ -559,7 +525,6 @@ fixed-link {
};
};
/* off-board header */
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default", "gpio";
......@@ -568,6 +533,85 @@ &i2c3 {
scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
pmic@25 {
compatible = "nxp,pca9450c";
reg = <0x25>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio3>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
regulators {
BUCK1 {
regulator-name = "BUCK1";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
};
reg_arm: BUCK2 {
regulator-name = "BUCK2";
regulator-min-microvolt = <720000>;
regulator-max-microvolt = <1025000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <3125>;
nxp,dvs-run-voltage = <950000>;
nxp,dvs-standby-voltage = <850000>;
};
BUCK4 {
regulator-name = "BUCK4";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3600000>;
regulator-boot-on;
regulator-always-on;
};
BUCK5 {
regulator-name = "BUCK5";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <1950000>;
regulator-boot-on;
regulator-always-on;
};
BUCK6 {
regulator-name = "BUCK6";
regulator-min-microvolt = <1045000>;
regulator-max-microvolt = <1155000>;
regulator-boot-on;
regulator-always-on;
};
LDO1 {
regulator-name = "LDO1";
regulator-min-microvolt = <1650000>;
regulator-max-microvolt = <1950000>;
regulator-boot-on;
regulator-always-on;
};
LDO3 {
regulator-name = "LDO3";
regulator-min-microvolt = <1710000>;
regulator-max-microvolt = <1890000>;
regulator-boot-on;
regulator-always-on;
};
LDO5 {
regulator-name = "LDO5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
};
};
};
/* off-board header */
......@@ -693,7 +737,7 @@ &usdhc1 {
status = "okay";
wifi@0 {
compatible = "cypress,cyw4373-fmac";
compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
reg = <0>;
};
};
......@@ -726,12 +770,14 @@ pinctrl_hog: hoggrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */
MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */
MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000040 /* M2SKT_OFF# */
MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */
MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x40000040 /* M2SKT_OFF# */
MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */
MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x40000040 /* M2SKT_PIN20 */
MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x40000040 /* M2SKT_PIN22 */
MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13 0x40000150 /* PCIE1_WDIS# */
MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */
MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */
MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */
MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */
MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000150 /* M2SKT_GDIS# */
MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */
MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */
MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */
......@@ -784,6 +830,13 @@ MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x140
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
......@@ -869,7 +922,7 @@ MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x10
pinctrl_pcie0: pciegrp {
fsl,pins = <
MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x110
MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x106
>;
};
......@@ -885,12 +938,18 @@ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x140
>;
};
pinctrl_reg_can: regcangrp {
pinctrl_reg_can1: regcan1grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x154
>;
};
pinctrl_reg_can2: regcan2grp {
fsl,pins = <
MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x154
>;
};
pinctrl_reg_usb2: regusb2grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x140
......@@ -903,12 +962,12 @@ MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x110
>;
};
pinctrl_sai2: sai2grp {
pinctrl_spi1: spi1grp {
fsl,pins = <
MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6
MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6
MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6
MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x82
MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x82
MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x82
MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x140
>;
};
......
arch/arm64/boot/dts/freescale/imx8mp-verdin-dahlia.dtsi
View file @ f0df584f
......@@ -3,7 +3,36 @@
* Copyright 2022 Toradex
*/
/* TODO: Audio Codec */
/ {
sound {
compatible = "simple-audio-card";
simple-audio-card,bitclock-master = <&codec_dai>;
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&codec_dai>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,name = "imx8mp-wm8904";
simple-audio-card,routing =
"Headphone Jack", "HPOUTL",
"Headphone Jack", "HPOUTR",
"IN2L", "Line In Jack",
"IN2R", "Line In Jack",
"Headphone Jack", "MICBIAS",
"IN1L", "Headphone Jack";
simple-audio-card,widgets =
"Microphone", "Headphone Jack",
"Headphone", "Headphone Jack",
"Line", "Line In Jack";
codec_dai: simple-audio-card,codec {
clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
sound-dai = <&wm8904_1a>;
};
simple-audio-card,cpu {
sound-dai = <&sai1>;
};
};
};
&backlight {
power-supply = <&reg_3p3v>;
......@@ -64,7 +93,21 @@ &i2c3 {
&i2c4 {
status = "okay";
/* TODO: Audio Codec */
/* Audio Codec */
wm8904_1a: audio-codec@1a {
compatible = "wlf,wm8904";
reg = <0x1a>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1>;
#sound-dai-cells = <0>;
clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
clock-names = "mclk";
AVDD-supply = <&reg_1p8v>;
CPVDD-supply = <&reg_1p8v>;
DBVDD-supply = <&reg_1p8v>;
DCVDD-supply = <&reg_1p8v>;
MICVDD-supply = <&reg_1p8v>;
};
};
/* Verdin PCIE_1 */
......@@ -95,7 +138,14 @@ &reg_usdhc2_vmmc {
vin-supply = <&reg_3p3v>;
};
/* TODO: Verdin I2S_1 */
/* Verdin I2S_1 */
&sai1 {
assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
assigned-clock-rates = <24576000>;
fsl,sai-mclk-direction-output;
status = "okay";
};
/* Verdin UART_1 */
&uart1 {
......
arch/arm64/boot/dts/freescale/imx8mp-verdin-dev.dtsi
View file @ f0df584f
......@@ -4,8 +4,6 @@
*/
/ {
/* TODO: Audio Codec */
reg_eth2phy: regulator-eth2phy {
compatible = "regulator-fixed";
enable-active-high;
......@@ -17,6 +15,41 @@ reg_eth2phy: regulator-eth2phy {
startup-delay-us = <200000>;
vin-supply = <&reg_3p3v>;
};
sound {
compatible = "simple-audio-card";
simple-audio-card,bitclock-master = <&codec_dai>;
simple-audio-card,format = "i2s";
simple-audio-card,frame-master = <&codec_dai>;
simple-audio-card,mclk-fs = <256>;
simple-audio-card,name = "imx8mp-nau8822";
simple-audio-card,routing =
"Headphones", "LHP",
"Headphones", "RHP",
"Speaker", "LSPK",
"Speaker", "RSPK",
"Line Out", "AUXOUT1",
"Line Out", "AUXOUT2",
"LAUX", "Line In",
"RAUX", "Line In",
"LMICP", "Mic In",
"RMICP", "Mic In";
simple-audio-card,widgets =
"Headphones", "Headphones",
"Line Out", "Line Out",
"Speaker", "Speaker",
"Microphone", "Mic In",
"Line", "Line In";
codec_dai: simple-audio-card,codec {
clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI1_MCLK1>;
sound-dai = <&nau8822_1a>;
};
simple-audio-card,cpu {
sound-dai = <&sai1>;
};
};
};
&backlight {
......@@ -88,7 +121,14 @@ &i2c3 {
&i2c4 {
status = "okay";
/* TODO: Audio Codec */
/* Audio Codec */
nau8822_1a: audio-codec@1a {
compatible = "nuvoton,nau8822";
reg = <0x1a>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_sai1>;
#sound-dai-cells = <0>;
};
};
/* Verdin PCIE_1 */
......@@ -119,7 +159,14 @@ &reg_usdhc2_vmmc {
vin-supply = <&reg_3p3v>;
};
/* TODO: Verdin I2C_1 with Audio Codec */
/* Verdin I2S_1 */
&sai1 {
assigned-clocks = <&clk IMX8MP_CLK_SAI1>;
assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
assigned-clock-rates = <24576000>;
fsl,sai-mclk-direction-output;
status = "okay";
};
/* Verdin UART_1, connector X50 through RS485 transceiver */
&uart1 {
......
arch/arm64/boot/dts/freescale/imx8mp.dtsi
View file @ f0df584f
......@@ -306,8 +306,7 @@ soc: soc@0 {
etm0: etm@28440000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x28440000 0x10000>;
arm,primecell-periphid = <0xbb95d>;
reg = <0x28440000 0x1000>;
cpu = <&A53_0>;
clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
......@@ -323,8 +322,7 @@ etm0_out_port: endpoint {
etm1: etm@28540000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x28540000 0x10000>;
arm,primecell-periphid = <0xbb95d>;
reg = <0x28540000 0x1000>;
cpu = <&A53_1>;
clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
......@@ -340,8 +338,7 @@ etm1_out_port: endpoint {
etm2: etm@28640000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x28640000 0x10000>;
arm,primecell-periphid = <0xbb95d>;
reg = <0x28640000 0x1000>;
cpu = <&A53_2>;
clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
......@@ -357,8 +354,7 @@ etm2_out_port: endpoint {
etm3: etm@28740000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x28740000 0x10000>;
arm,primecell-periphid = <0xbb95d>;
reg = <0x28740000 0x1000>;
cpu = <&A53_3>;
clocks = <&clk IMX8MP_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
......@@ -701,7 +697,7 @@ snvs: snvs@30370000 {
snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap =<&snvs>;
regmap = <&snvs>;
offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
......@@ -854,7 +850,7 @@ pgc_ispdwp: power-domain@18 {
pgc_vpumix: power-domain@19 {
#power-domain-cells = <0>;
reg = <IMX8MP_POWER_DOMAIN_VPUMIX>;
clocks =<&clk IMX8MP_CLK_VPU_ROOT>;
clocks = <&clk IMX8MP_CLK_VPU_ROOT>;
};
pgc_vpu_g1: power-domain@20 {
......@@ -1846,8 +1842,8 @@ pcie: pcie@33800000 {
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
<0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
ranges = <0x81000000 0 0x00000000 0x1ff80000 0 0x00010000>, /* downstream I/O 64KB */
<0x82000000 0 0x18000000 0x18000000 0 0x07f00000>; /* non-prefetchable memory */
num-lanes = <1>;
num-viewport = <4>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
......
arch/arm64/boot/dts/freescale/imx8mq-librem5-devkit.dts
View file @ f0df584f
......@@ -139,18 +139,6 @@ reg_pwr_en: regulator-pwr-en {
regulator-always-on;
};
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_pwr>;
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
wwan_codec: sound-wwan-codec {
compatible = "option,gtm601";
#sound-dai-cells = <0>;
......@@ -242,6 +230,13 @@ wifi_pwr_en: regulator-wifi-en {
enable-active-high;
regulator-always-on;
};
wifi_pwr_seq: pwrseq {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2_rst>;
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
};
};
&A53_0 {
......@@ -324,6 +319,7 @@ buck2_reg: BUCK2 {
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <1000000>;
rohm,dvs-idle-voltage = <900000>;
regulator-always-on;
};
buck3_reg: BUCK3 {
......@@ -561,9 +557,9 @@ accel-gyro@6a {
reg = <0x6a>;
vdd-supply = <&reg_3v3_p>;
vddio-supply = <&reg_3v3_p>;
mount-matrix = "1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
mount-matrix = "1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
};
};
......@@ -807,7 +803,7 @@ MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
>;
};
pinctrl_usdhc2_pwr: usdhc2pwrgrp {
pinctrl_usdhc2_rst: usdhc2rstgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
>;
......@@ -1030,8 +1026,8 @@ &usdhc2 {
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
bus-width = <4>;
vmmc-supply = <&reg_usdhc2_vmmc>;
power-supply = <&wifi_pwr_en>;
vmmc-supply = <&wifi_pwr_en>;
mmc-pwrseq = <&wifi_pwr_seq>;
broken-cd;
disable-wp;
cap-sdio-irq;
......
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dts
View file @ f0df584f
......@@ -13,9 +13,9 @@ / {
};
&accel_gyro {
mount-matrix = "1", "0", "0",
"0", "-1", "0",
"0", "0", "1";
mount-matrix = "1", "0", "0",
"0", "-1", "0",
"0", "0", "1";
};
&bq25895 {
......
arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dtsi
View file @ f0df584f
......@@ -16,9 +16,9 @@ / {
};
&accel_gyro {
mount-matrix = "1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
mount-matrix = "1", "0", "0",
"0", "1", "0",
"0", "0", "-1";
};
&bq25895 {
......@@ -39,9 +39,9 @@ MX8MQ_IOMUXC_SPDIF_RX_GPIO5_IO4 0x83
};
&magnetometer {
mount-matrix = "1", "0", "0",
"0", "-1", "0",
"0", "0", "-1";
mount-matrix = "1", "0", "0",
"0", "-1", "0",
"0", "0", "-1";
};
&proximity {
......
arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts
View file @ f0df584f
......@@ -23,5 +23,5 @@ &lcd_panel {
};
&proximity {
proximity-near-level = <5>;
proximity-near-level = <7>;
};
arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
View file @ f0df584f
......@@ -91,6 +91,7 @@ reg_aud_1v8: regulator-audio-1v8 {
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
reg_mic_2v4: regulator-mic-2v4 {
......@@ -795,6 +796,8 @@ typec_pd: usb-pd@3f {
interrupt-parent = <&gpio1>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "irq";
extcon = <&usb3_phy0>;
wakeup-source;
connector {
compatible = "usb-c-connector";
......@@ -1376,7 +1379,7 @@ &usdhc1 {
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
bus-width = <8>;
vmmc-supply = <&reg_vdd_3v3>;
power-supply = <&reg_vdd_1v8>;
vqmmc-supply = <&reg_vdd_1v8>;
non-removable;
status = "okay";
};
......@@ -1391,7 +1394,7 @@ &usdhc2 {
bus-width = <4>;
vmmc-supply = <&reg_wifi_3v3>;
mmc-pwrseq = <&usdhc2_pwrseq>;
post-power-on-delay-ms = <1000>;
post-power-on-delay-ms = <20>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
max-frequency = <100000000>;
disable-wp;
......
arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
View file @ f0df584f
......@@ -133,7 +133,7 @@ eeprom@50 {
};
};
&pgc_gpu{
&pgc_gpu {
power-supply = <&sw1a_reg>;
};
......
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq-mba8mx.dts
View file @ f0df584f
......@@ -24,7 +24,7 @@ extcon_usbotg: extcon-usbotg0 {
compatible = "linux,extcon-usb-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon0>;
id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
};
pcie0_refclk: pcie0-refclk {
......
arch/arm64/boot/dts/freescale/imx8mq.dtsi
View file @ f0df584f
......@@ -330,6 +330,198 @@ soc: soc@0 {
nvmem-cells = <&imx8mq_uid>;
nvmem-cell-names = "soc_unique_id";
etm0: etm@28440000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x28440000 0x1000>;
cpu = <&A53_0>;
clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
out-ports {
port {
etm0_out_port: endpoint {
remote-endpoint = <&ca_funnel_in_port0>;
};
};
};
};
etm1: etm@28540000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x28540000 0x1000>;
cpu = <&A53_1>;
clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
out-ports {
port {
etm1_out_port: endpoint {
remote-endpoint = <&ca_funnel_in_port1>;
};
};
};
};
etm2: etm@28640000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x28640000 0x1000>;
cpu = <&A53_2>;
clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
out-ports {
port {
etm2_out_port: endpoint {
remote-endpoint = <&ca_funnel_in_port2>;
};
};
};
};
etm3: etm@28740000 {
compatible = "arm,coresight-etm4x", "arm,primecell";
reg = <0x28740000 0x1000>;
cpu = <&A53_3>;
clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
out-ports {
port {
etm3_out_port: endpoint {
remote-endpoint = <&ca_funnel_in_port3>;
};
};
};
};
funnel {
/*
* non-configurable funnel don't show up on the AMBA
* bus. As such no need to add "arm,primecell".
*/
compatible = "arm,coresight-static-funnel";
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
ca_funnel_in_port0: endpoint {
remote-endpoint = <&etm0_out_port>;
};
};
port@1 {
reg = <1>;
ca_funnel_in_port1: endpoint {
remote-endpoint = <&etm1_out_port>;
};
};
port@2 {
reg = <2>;
ca_funnel_in_port2: endpoint {
remote-endpoint = <&etm2_out_port>;
};
};
port@3 {
reg = <3>;
ca_funnel_in_port3: endpoint {
remote-endpoint = <&etm3_out_port>;
};
};
};
out-ports {
port {
ca_funnel_out_port0: endpoint {
remote-endpoint = <&hugo_funnel_in_port0>;
};
};
};
};
funnel@28c03000 {
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
reg = <0x28c03000 0x1000>;
clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
in-ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
hugo_funnel_in_port0: endpoint {
remote-endpoint = <&ca_funnel_out_port0>;
};
};
port@1 {
reg = <1>;
hugo_funnel_in_port1: endpoint {
/* M4 input */
};
};
/* the other input ports are not connect to anything */
};
out-ports {
port {
hugo_funnel_out_port0: endpoint {
remote-endpoint = <&etf_in_port>;
};
};
};
};
etf@28c04000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0x28c04000 0x1000>;
clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
in-ports {
port {
etf_in_port: endpoint {
remote-endpoint = <&hugo_funnel_out_port0>;
};
};
};
out-ports {
port {
etf_out_port: endpoint {
remote-endpoint = <&etr_in_port>;
};
};
};
};
etr@28c06000 {
compatible = "arm,coresight-tmc", "arm,primecell";
reg = <0x28c06000 0x1000>;
clocks = <&clk IMX8MQ_CLK_MAIN_AXI>;
clock-names = "apb_pclk";
in-ports {
port {
etr_in_port: endpoint {
remote-endpoint = <&etf_out_port>;
};
};
};
};
aips1: bus@30000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x30000000 0x400000>;
......@@ -631,9 +823,9 @@ snvs: snvs@30370000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x30370000 0x10000>;
snvs_rtc: snvs-rtc-lp{
snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap =<&snvs>;
regmap = <&snvs>;
offset = <0x34>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
......@@ -1582,8 +1774,8 @@ pcie1: pcie@33c00000 {
#size-cells = <2>;
device_type = "pci";
bus-range = <0x00 0xff>;
ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */
<0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
ranges = <0x81000000 0 0x00000000 0x27f80000 0 0x00010000>, /* downstream I/O 64KB */
<0x82000000 0 0x20000000 0x20000000 0 0x07f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
......
arch/arm64/boot/dts/freescale/imx8qm-mek.dts
View file @ f0df584f
......@@ -22,6 +22,10 @@ cpus {
/delete-node/ cpu@101;
};
thermal-zones {
/delete-node/ cpu1-thermal;
};
memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0 0x40000000>;
......
arch/arm64/boot/dts/freescale/imx8qm.dtsi
View file @ f0df584f
......@@ -9,6 +9,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/pads-imx8qm.h>
#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&gic>;
......@@ -23,9 +24,9 @@ aliases {
serial1 = &lpuart1;
serial2 = &lpuart2;
serial3 = &lpuart3;
vpu_core0 = &vpu_core0;
vpu_core1 = &vpu_core1;
vpu_core2 = &vpu_core2;
vpu-core0 = &vpu_core0;
vpu-core1 = &vpu_core1;
vpu-core2 = &vpu_core2;
};
cpus {
......@@ -62,6 +63,7 @@ A53_0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
......@@ -70,12 +72,15 @@ A53_0: cpu@0 {
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
};
A53_1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
......@@ -84,12 +89,15 @@ A53_1: cpu@1 {
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
};
A53_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
......@@ -98,12 +106,15 @@ A53_2: cpu@2 {
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
};
A53_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
clocks = <&clk IMX_SC_R_A53 IMX_SC_PM_CLK_CPU>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
......@@ -112,12 +123,15 @@ A53_3: cpu@3 {
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
};
A72_0: cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0 0x100>;
clocks = <&clk IMX_SC_R_A72 IMX_SC_PM_CLK_CPU>;
enable-method = "psci";
i-cache-size = <0xC000>;
i-cache-line-size = <64>;
......@@ -126,14 +140,19 @@ A72_0: cpu@100 {
d-cache-line-size = <64>;
d-cache-sets = <256>;
next-level-cache = <&A72_L2>;
operating-points-v2 = <&a72_opp_table>;
#cooling-cells = <2>;
};
A72_1: cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0 0x101>;
clocks = <&clk IMX_SC_R_A72 IMX_SC_PM_CLK_CPU>;
enable-method = "psci";
next-level-cache = <&A72_L2>;
operating-points-v2 = <&a72_opp_table>;
#cooling-cells = <2>;
};
A53_L2: l2-cache0 {
......@@ -155,6 +174,66 @@ A72_L2: l2-cache1 {
};
};
a53_opp_table: opp-table-0 {
compatible = "operating-points-v2";
opp-shared;
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <900000>;
clock-latency-ns = <150000>;
};
opp-896000000 {
opp-hz = /bits/ 64 <896000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <150000>;
};
opp-1104000000 {
opp-hz = /bits/ 64 <1104000000>;
opp-microvolt = <1100000>;
clock-latency-ns = <150000>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1100000>;
clock-latency-ns = <150000>;
opp-suspend;
};
};
a72_opp_table: opp-table-1 {
compatible = "operating-points-v2";
opp-shared;
opp-600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <150000>;
};
opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
opp-microvolt = <1000000>;
clock-latency-ns = <150000>;
};
opp-1296000000 {
opp-hz = /bits/ 64 <1296000000>;
opp-microvolt = <1100000>;
clock-latency-ns = <150000>;
};
opp-1596000000 {
opp-hz = /bits/ 64 <1596000000>;
opp-microvolt = <1100000>;
clock-latency-ns = <150000>;
opp-suspend;
};
};
gic: interrupt-controller@51a00000 {
compatible = "arm,gic-v3";
reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
......@@ -212,6 +291,133 @@ iomuxc: pinctrl {
rtc: rtc {
compatible = "fsl,imx8qxp-sc-rtc";
};
tsens: thermal-sensor {
compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
#thermal-sensor-cells = <1>;
};
};
thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tsens IMX_SC_R_A53>;
trips {
cpu_alert0: trip0 {
temperature = <107000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit0: trip1 {
temperature = <127000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device =
<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tsens IMX_SC_R_A72>;
trips {
cpu_alert1: trip0 {
temperature = <107000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit1: trip1 {
temperature = <127000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert1>;
cooling-device =
<&A72_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A72_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
gpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tsens IMX_SC_R_GPU_0_PID0>;
trips {
gpu_alert0: trip0 {
temperature = <107000>;
hysteresis = <2000>;
type = "passive";
};
gpu_crit0: trip1 {
temperature = <127000>;
hysteresis = <2000>;
type = "critical";
};
};
};
gpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tsens IMX_SC_R_GPU_1_PID0>;
trips {
gpu_alert1: trip0 {
temperature = <107000>;
hysteresis = <2000>;
type = "passive";
};
gpu_crit1: trip1 {
temperature = <127000>;
hysteresis = <2000>;
type = "critical";
};
};
};
drc0-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tsens IMX_SC_R_DRC_0>;
trips {
drc_alert0: trip0 {
temperature = <107000>;
hysteresis = <2000>;
type = "passive";
};
drc_crit0: trip1 {
temperature = <127000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
/* sorted in register address */
......
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
View file @ f0df584f
......@@ -180,7 +180,7 @@ IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020
>;
};
pinctrl_leds: ledsgrp{
pinctrl_leds: ledsgrp {
fsl,pins = <
IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06 0x00000021
IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07 0x00000021
......
arch/arm64/boot/dts/freescale/imx8qxp.dtsi
View file @ f0df584f
......@@ -46,9 +46,9 @@ aliases {
serial1 = &lpuart1;
serial2 = &lpuart2;
serial3 = &lpuart3;
vpu_core0 = &vpu_core0;
vpu_core1 = &vpu_core1;
vpu_core2 = &vpu_core2;
vpu-core0 = &vpu_core0;
vpu-core1 = &vpu_core1;
vpu-core2 = &vpu_core2;
};
cpus {
......
arch/arm64/boot/dts/freescale/imx8ulp-evk.dts
View file @ f0df584f
......@@ -20,6 +20,55 @@ memory@80000000 {
reg = <0x0 0x80000000 0 0x80000000>;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
linux,cma {
compatible = "shared-dma-pool";
reusable;
size = <0 0x28000000>;
linux,cma-default;
};
m33_reserved: noncacheable-section@a8600000 {
reg = <0 0xa8600000 0 0x1000000>;
no-map;
};
rsc_table: rsc-table@1fff8000{
reg = <0 0x1fff8000 0 0x1000>;
no-map;
};
vdev0vring0: vdev0vring0@aff00000 {
reg = <0 0xaff00000 0 0x8000>;
no-map;
};
vdev0vring1: vdev0vring1@aff08000 {
reg = <0 0xaff08000 0 0x8000>;
no-map;
};
vdev1vring0: vdev1vring0@aff10000 {
reg = <0 0xaff10000 0 0x8000>;
no-map;
};
vdev1vring1: vdev1vring1@aff18000 {
reg = <0 0xaff18000 0 0x8000>;
no-map;
};
vdevbuffer: vdevbuffer@a8400000 {
compatible = "shared-dma-pool";
reg = <0 0xa8400000 0 0x100000>;
no-map;
};
};
clock_ext_rmii: clock-ext-rmii {
compatible = "fixed-clock";
clock-frequency = <50000000>;
......@@ -36,6 +85,31 @@ clock_ext_ts: clock-ext-ts {
};
};
&cm33 {
mbox-names = "tx", "rx", "rxdb";
mboxes = <&mu 0 1>,
<&mu 1 1>,
<&mu 3 1>;
memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
status = "okay";
};
&flexspi2 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_flexspi2_ptd>;
pinctrl-1 = <&pinctrl_flexspi2_ptd>;
status = "okay";
mx25uw51345gxdi00: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <200000000>;
spi-tx-bus-width = <8>;
spi-rx-bus-width = <8>;
};
};
&lpuart5 {
/* console */
pinctrl-names = "default", "sleep";
......@@ -44,10 +118,29 @@ &lpuart5 {
status = "okay";
};
&usdhc0 {
&lpi2c7 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_lpi2c7>;
pinctrl-1 = <&pinctrl_lpi2c7>;
status = "okay";
pcal6408: gpio@21 {
compatible = "nxp,pcal9554b";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
};
&usdhc0 {
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc0>;
pinctrl-1 = <&pinctrl_usdhc0>;
pinctrl-2 = <&pinctrl_usdhc0>;
pinctrl-3 = <&pinctrl_usdhc0>;
non-removable;
bus-width = <8>;
status = "okay";
......@@ -79,6 +172,10 @@ ethphy: ethernet-phy@1 {
};
};
&mu {
status = "okay";
};
&iomuxc1 {
pinctrl_enet: enetgrp {
fsl,pins = <
......@@ -96,6 +193,23 @@ MX8ULP_PAD_PTF10__ENET0_1588_CLKIN 0x43
>;
};
pinctrl_flexspi2_ptd: flexspi2ptdgrp {
fsl,pins = <
MX8ULP_PAD_PTD12__FLEXSPI2_A_SS0_B 0x42
MX8ULP_PAD_PTD13__FLEXSPI2_A_SCLK 0x42
MX8ULP_PAD_PTD14__FLEXSPI2_A_DATA3 0x42
MX8ULP_PAD_PTD15__FLEXSPI2_A_DATA2 0x42
MX8ULP_PAD_PTD16__FLEXSPI2_A_DATA1 0x42
MX8ULP_PAD_PTD17__FLEXSPI2_A_DATA0 0x42
MX8ULP_PAD_PTD18__FLEXSPI2_A_DQS 0x42
MX8ULP_PAD_PTD19__FLEXSPI2_A_DATA7 0x42
MX8ULP_PAD_PTD20__FLEXSPI2_A_DATA6 0x42
MX8ULP_PAD_PTD21__FLEXSPI2_A_DATA5 0x42
MX8ULP_PAD_PTD22__FLEXSPI2_A_DATA4 0x42
>;
};
pinctrl_lpuart5: lpuart5grp {
fsl,pins = <
MX8ULP_PAD_PTF14__LPUART5_TX 0x3
......@@ -103,19 +217,26 @@ MX8ULP_PAD_PTF15__LPUART5_RX 0x3
>;
};
pinctrl_lpi2c7: lpi2c7grp {
fsl,pins = <
MX8ULP_PAD_PTE12__LPI2C7_SCL 0x20
MX8ULP_PAD_PTE13__LPI2C7_SDA 0x20
>;
};
pinctrl_usdhc0: usdhc0grp {
fsl,pins = <
MX8ULP_PAD_PTD1__SDHC0_CMD 0x43
MX8ULP_PAD_PTD2__SDHC0_CLK 0x10042
MX8ULP_PAD_PTD10__SDHC0_D0 0x43
MX8ULP_PAD_PTD9__SDHC0_D1 0x43
MX8ULP_PAD_PTD8__SDHC0_D2 0x43
MX8ULP_PAD_PTD7__SDHC0_D3 0x43
MX8ULP_PAD_PTD6__SDHC0_D4 0x43
MX8ULP_PAD_PTD5__SDHC0_D5 0x43
MX8ULP_PAD_PTD4__SDHC0_D6 0x43
MX8ULP_PAD_PTD3__SDHC0_D7 0x43
MX8ULP_PAD_PTD11__SDHC0_DQS 0x10042
MX8ULP_PAD_PTD1__SDHC0_CMD 0x3
MX8ULP_PAD_PTD2__SDHC0_CLK 0x10002
MX8ULP_PAD_PTD10__SDHC0_D0 0x3
MX8ULP_PAD_PTD9__SDHC0_D1 0x3
MX8ULP_PAD_PTD8__SDHC0_D2 0x3
MX8ULP_PAD_PTD7__SDHC0_D3 0x3
MX8ULP_PAD_PTD6__SDHC0_D4 0x3
MX8ULP_PAD_PTD5__SDHC0_D5 0x3
MX8ULP_PAD_PTD4__SDHC0_D6 0x3
MX8ULP_PAD_PTD3__SDHC0_D7 0x3
MX8ULP_PAD_PTD11__SDHC0_DQS 0x10002
>;
};
};
arch/arm64/boot/dts/freescale/imx8ulp.dtsi
View file @ f0df584f
......@@ -7,6 +7,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/imx8ulp-power.h>
#include <dt-bindings/thermal/thermal.h>
#include "imx8ulp-pinfunc.h"
......@@ -39,6 +40,7 @@ A35_0: cpu@0 {
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
cpu-idle-states = <&cpu_sleep>;
};
A35_1: cpu@1 {
......@@ -47,6 +49,7 @@ A35_1: cpu@1 {
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&A35_L2>;
cpu-idle-states = <&cpu_sleep>;
};
A35_L2: l2-cache0 {
......@@ -54,6 +57,19 @@ A35_L2: l2-cache0 {
cache-level = <2>;
cache-unified;
};
idle-states {
entry-method = "psci";
cpu_sleep: cpu-sleep {
compatible = "arm,idle-state";
arm,psci-suspend-param = <0x0>;
local-timer-stop;
entry-latency-us = <1000>;
exit-latency-us = <700>;
min-residency-us = <2700>;
};
};
};
gic: interrupt-controller@2d400000 {
......@@ -78,6 +94,28 @@ psci {
method = "smc";
};
thermal-zones {
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&scmi_sensor 0>;
trips {
cpu_alert0: trip0 {
temperature = <85000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit0: trip1 {
temperature = <95000>;
hysteresis = <2000>;
type = "critical";
};
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
......@@ -148,11 +186,17 @@ scmi_sensor: protocol@15 {
};
};
cm33: remoteproc-cm33 {
compatible = "fsl,imx8ulp-cm33";
status = "disabled";
};
soc: soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x0 0x40000000>;
ranges = <0x0 0x0 0x0 0x40000000>,
<0x60000000 0x0 0x60000000 0x1000000>;
s4muap: mailbox@27020000 {
compatible = "fsl,imx8ulp-mu-s4";
......@@ -307,6 +351,21 @@ pcc4: clock-controller@29800000 {
#reset-cells = <1>;
};
flexspi2: spi@29810000 {
compatible = "nxp,imx8mm-fspi";
reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>,
<&pcc4 IMX8ULP_CLK_FLEXSPI2>;
clock-names = "fspi", "fspi_en";
assigned-clocks = <&pcc4 IMX8ULP_CLK_FLEXSPI2>;
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
status = "disabled";
};
lpi2c6: i2c@29840000 {
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
reg = <0x29840000 0x10000>;
......@@ -365,6 +424,10 @@ usdhc0: mmc@298d0000 {
<&pcc4 IMX8ULP_CLK_USDHC0>;
clock-names = "ipg", "ahb", "per";
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>;
assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV1>,
<&pcc4 IMX8ULP_CLK_USDHC0>;
assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV1>;
assigned-clock-rates = <389283840>, <389283840>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step = <2>;
bus-width = <4>;
......@@ -380,6 +443,10 @@ usdhc1: mmc@298e0000 {
<&pcc4 IMX8ULP_CLK_USDHC1>;
clock-names = "ipg", "ahb", "per";
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>;
assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>,
<&pcc4 IMX8ULP_CLK_USDHC1>;
assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
assigned-clock-rates = <194641920>, <194641920>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step = <2>;
bus-width = <4>;
......@@ -395,6 +462,10 @@ usdhc2: mmc@298f0000 {
<&pcc4 IMX8ULP_CLK_USDHC2>;
clock-names = "ipg", "ahb", "per";
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>,
<&pcc4 IMX8ULP_CLK_USDHC2>;
assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD3_DIV2>;
assigned-clock-rates = <194641920>, <194641920>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step = <2>;
bus-width = <4>;
......
arch/arm64/boot/dts/freescale/imx8x-colibri-aster.dtsi
View file @ f0df584f
......@@ -35,7 +35,7 @@ &lpuart2 {
/* Colibri UART_A */
&lpuart3 {
status= "okay";
status = "okay";
};
/* Colibri SDCard */
......
arch/arm64/boot/dts/freescale/imx8x-colibri-iris.dtsi
View file @ f0df584f
......@@ -77,7 +77,7 @@ &lpuart2 {
/* Colibri UART_A */
&lpuart3 {
status= "okay";
status = "okay";
};
&lsio_gpio3 {
......
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
View file @ f0df584f
......@@ -15,6 +15,52 @@ chosen {
stdout-path = &lpuart1;
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
linux,cma {
compatible = "shared-dma-pool";
reusable;
alloc-ranges = <0 0x80000000 0 0x40000000>;
size = <0 0x10000000>;
linux,cma-default;
};
vdev0vring0: vdev0vring0@a4000000 {
reg = <0 0xa4000000 0 0x8000>;
no-map;
};
vdev0vring1: vdev0vring1@a4008000 {
reg = <0 0xa4008000 0 0x8000>;
no-map;
};
vdev1vring0: vdev1vring0@a4000000 {
reg = <0 0xa4010000 0 0x8000>;
no-map;
};
vdev1vring1: vdev1vring1@a4018000 {
reg = <0 0xa4018000 0 0x8000>;
no-map;
};
rsc_table: rsc-table@2021f000 {
reg = <0 0x2021f000 0 0x1000>;
no-map;
};
vdevbuffer: vdevbuffer@a4020000 {
compatible = "shared-dma-pool";
reg = <0 0xa4020000 0 0x100000>;
no-map;
};
};
reg_vref_1v8: regulator-adc-vref {
compatible = "regulator-fixed";
regulator-name = "vref_1v8";
......@@ -39,6 +85,16 @@ &adc1 {
status = "okay";
};
&cm33 {
mbox-names = "tx", "rx", "rxdb";
mboxes = <&mu1 0 1>,
<&mu1 1 1>,
<&mu1 3 1>;
memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
status = "okay";
};
&mu1 {
status = "okay";
};
......
arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright (c) 2022-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Markus Niebel
* Author: Alexander Stein
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/usb/pd.h>
#include "imx93-tqma9352.dtsi"
/{
model = "TQ-Systems i.MX93 TQMa93xxLA on MBa93xxLA SBC";
compatible = "tq,imx93-tqma9352-mba93xxla",
"tq,imx93-tqma9352", "fsl,imx93";
chosen {
stdout-path = &lpuart1;
};
aliases {
eeprom0 = &eeprom0;
rtc0 = &pcf85063;
rtc1 = &bbnsm_rtc;
};
backlight_lvds: backlight {
compatible = "pwm-backlight";
pwms = <&tpm5 0 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_12v0>;
enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
clk_dp: clk-dp {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <26000000>;
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
switch-a {
label = "switcha";
linux,code = <BTN_0>;
gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
wakeup-source;
};
switch-b {
label = "switchb";
linux,code = <BTN_1>;
gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
wakeup-source;
};
};
gpio-leds {
compatible = "gpio-leds";
led-1 {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-on";
};
led-2 {
color = <LED_COLOR_ID_AMBER>;
function = LED_FUNCTION_HEARTBEAT;
gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
iio-hwmon {
compatible = "iio-hwmon";
io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
};
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "V_3V3_MB";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_3v8: regulator-3v8 {
compatible = "regulator-fixed";
regulator-name = "V_3V8";
regulator-min-microvolt = <3800000>;
regulator-max-microvolt = <3800000>;
gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
enable-active-high;
/* TODO: this is supply for IOT module */
regulator-always-on;
};
reg_5v0: regulator-5v0 {
compatible = "regulator-fixed";
regulator-name = "V_5V0_MB";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_12v0: regulator-12v0 {
compatible = "regulator-fixed";
regulator-name = "V_12V";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&adc1 {
status = "okay";
};
&eqos {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy_eqos>;
status = "okay";
mdio {
compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
ethphy_eqos: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eqos_phy>;
interrupt-parent = <&gpio3>;
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
reset-assert-us = <500000>;
reset-deassert-us = <50000>;
enet-phy-lane-no-swap;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,dp83867-rxctrl-strap-quirk;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy_fec>;
fsl,magic-packet;
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <5000000>;
ethphy_fec: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec_phy>;
interrupt-parent = <&gpio3>;
interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
reset-assert-us = <500000>;
reset-deassert-us = <50000>;
enet-phy-lane-no-swap;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,dp83867-rxctrl-strap-quirk;
ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
};
};
};
&flexcan1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <&reg_3v3>;
status = "okay";
};
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&reg_3v3>;
status = "okay";
};
&gpio1 {
expander-irq-hog {
gpio-hog;
gpios = <12 GPIO_ACTIVE_LOW>;
input;
line-name = "PEX_INT#";
};
rtc-irq-hog {
gpio-hog;
gpios = <14 GPIO_ACTIVE_LOW>;
input;
line-name = "RTC_EVENT#";
};
};
&gpio3 {
ethphy-eqos-irq-hog {
gpio-hog;
gpios = <26 GPIO_ACTIVE_LOW>;
input;
line-name = "ENET0_IRQ#";
};
ethphy-fec-irq-hog {
gpio-hog;
gpios = <27 GPIO_ACTIVE_LOW>;
input;
line-name = "ENET1_IRQ#";
};
};
&lpi2c3 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_lpi2c3>;
pinctrl-1 = <&pinctrl_lpi2c3>;
status = "okay";
temperature-sensor@1c {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x1c>;
};
eeprom2: eeprom@54 {
compatible = "nxp,se97b", "atmel,24c02";
reg = <0x54>;
pagesize = <16>;
vcc-supply = <&reg_3v3>;
};
expander0: gpio@70 {
compatible = "nxp,pca9538";
reg = <0x70>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pexp_irq>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
interrupt-parent = <&gpio1>;
interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
vcc-supply = <&reg_3v3>;
gpio-line-names = "3V8_EN", "",
"", "IOT_PWRKEY",
"IOT_RESET", "IOT_W_DISABLE",
"BUTTON_A#", "BUTTON_B#";
/*
* Controls the IOT W_DISABLE pin which is low active
* as disable signal but inverted as seen from the CPU.
* The output-low states, the signal is
* inactive, e.g. not disabled
*/
iot_wdisable_hog: iot-wdisable-hog {
gpio-hog;
gpios = <5 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "IOT_W_DISABLE";
};
};
expander1: gpio@71 {
compatible = "nxp,pca9538";
reg = <0x71>;
gpio-controller;
#gpio-cells = <2>;
vcc-supply = <&reg_3v3>;
gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
"USB_RESET#", "",
"WLAN_PD#", "WLAN_W_DISABLE#",
"WLAN_PERST#", "12V_EN";
/*
* Controls the WiFi card PD pin which is low active
* as power down signal. The output-low states, the signal
* is inactive, e.g. not power down
*/
wlan-pd-hog {
gpio-hog;
gpios = <4 GPIO_ACTIVE_LOW>;
output-low;
line-name = "WLAN_PD#";
};
/*
* Controls the WiFi card disable pin which is low active
* as disable signal. The output-low states, the signal
* is inactive, e.g. not disabled
*/
wlan-wdisable-hog {
gpio-hog;
gpios = <5 GPIO_ACTIVE_LOW>;
output-low;
line-name = "WLAN_W_DISABLE#";
};
/*
* Controls the WiFi card reset pin which is low active
* as reset signal. The output-low states, the signal
* is inactive, e.g. not in reset
*/
wlan-perst-hog {
gpio-hog;
gpios = <6 GPIO_ACTIVE_LOW>;
output-low;
line-name = "WLAN_PERST#";
};
};
expander2: gpio@72 {
compatible = "nxp,pca9538";
reg = <0x72>;
gpio-controller;
#gpio-cells = <2>;
vcc-supply = <&reg_3v3>;
gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
"LCD_BL_EN", "DP_EN",
"MIPI_CSI_EN", "MIPI_CSI_RST#",
"USER_LED1", "USER_LED2";
};
};
&lpi2c5 {
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_lpi2c5>;
pinctrl-1 = <&pinctrl_lpi2c5>;
status = "okay";
dp_bridge: dp-bridge@f {
compatible = "toshiba,tc9595", "toshiba,tc358767";
reg = <0x0f>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tc9595>;
clock-names = "ref";
clocks = <&clk_dp>;
reset-gpios = <&expander2 3 GPIO_ACTIVE_HIGH>;
interrupt-parent = <&gpio4>;
interrupts = <29 IRQ_TYPE_EDGE_RISING>;
toshiba,hpd-pin = <0>;
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dp_dsi_in: endpoint {
data-lanes = <1 2 3 4>;
};
};
};
};
};
&lpuart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&lpuart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
linux,rs485-enabled-at-boot-time;
status = "okay";
};
/* disabled per default, console for M33 */
&lpuart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "disabled";
};
&lpuart6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart6>;
status = "okay";
};
&lpuart8 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart8>;
status = "okay";
};
&pcf85063 {
/* RTC_EVENT# is connected on MBa93xxLA */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcf85063>;
interrupt-parent = <&gpio1>;
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
};
&tpm5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tpm5>;
};
&usdhc2 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_usdhc2_vmmc>;
bus-width = <4>;
no-sdio;
no-mmc;
disable-wp;
status = "okay";
};
&iomuxc {
pinctrl_eqos: eqosgrp {
fsl,pins = <
/* PD | FSEL_2 | DSE X4 */
MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x51e
MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x4000051e
/* PD | FSEL_2 | DSE X6 */
MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x57e
MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x57e
MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x57e
MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x57e
/* PD | FSEL_3 | DSE X6 */
MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x5fe
MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x57e
/* PD | FSEL_2 | DSE X4 */
MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x51e
MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1 0x51e
MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2 0x51e
MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3 0x51e
MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x51e
/* PD | FSEL_3 | DSE X3 */
MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x58e
>;
};
pinctrl_eqos_phy: eqosphygrp {
fsl,pins = <
MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x1306
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
/* PD | FSEL_2 | DSE X4 */
MX93_PAD_ENET2_MDC__ENET1_MDC 0x51e
MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x4000051e
/* PD | FSEL_2 | DSE X6 */
MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e
MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e
MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e
MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e
/* PD | FSEL_3 | DSE X6 */
MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe
MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e
/* PD | FSEL_2 | DSE X4 */
MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x51e
MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x51e
MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x51e
MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x51e
MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x51e
/* PD | FSEL_3 | DSE X3 */
MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x58e
>;
};
pinctrl_fec_phy: fecphygrp {
fsl,pins = <
MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x1306
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e
MX93_PAD_PDM_CLK__CAN1_TX 0x139e
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX93_PAD_GPIO_IO25__CAN2_TX 0x139e
MX93_PAD_GPIO_IO27__CAN2_RX 0x139e
>;
};
pinctrl_lpi2c3: lpi2c3grp {
fsl,pins = <
MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x40000b9e
MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x40000b9e
>;
};
pinctrl_lpi2c5: lpi2c5grp {
fsl,pins = <
MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e
MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e
>;
};
pinctrl_pcf85063: pcf85063grp {
fsl,pins = <
MX93_PAD_SAI1_RXD0__GPIO1_IO14 0x1306
>;
};
pinctrl_pexp_irq: pexpirqgrp {
fsl,pins = <
MX93_PAD_SAI1_TXC__GPIO1_IO12 0x1306
>;
};
pinctrl_tc9595: tc9595-grp {
fsl,pins = <
/* DP_IRQ */
MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x1306
>;
};
pinctrl_tpm5: tpm5grp {
fsl,pins = <
MX93_PAD_GPIO_IO06__TPM5_CH0 0x57e
>;
};
pinctrl_typec: typecgrp {
fsl,pins = <
MX93_PAD_I2C2_SCL__GPIO1_IO02 0x1306
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX93_PAD_UART1_RXD__LPUART1_RX 0x31e
MX93_PAD_UART1_TXD__LPUART1_TX 0x31e
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX93_PAD_UART2_TXD__LPUART2_TX 0x31e
MX93_PAD_UART2_RXD__LPUART2_RX 0x31e
MX93_PAD_SAI1_TXD0__LPUART2_RTS_B 0x31e
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX93_PAD_GPIO_IO14__LPUART3_TX 0x31e
MX93_PAD_GPIO_IO15__LPUART3_RX 0x31e
>;
};
pinctrl_uart6: uart6grp {
fsl,pins = <
MX93_PAD_GPIO_IO04__LPUART6_TX 0x31e
MX93_PAD_GPIO_IO05__LPUART6_RX 0x31e
>;
};
pinctrl_uart8: uart8grp {
fsl,pins = <
MX93_PAD_GPIO_IO12__LPUART8_TX 0x31e
MX93_PAD_GPIO_IO13__LPUART8_RX 0x31e
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e
>;
};
pinctrl_usdhc2_hs: usdhc2hsgrp {
fsl,pins = <
/* HYS | PD | PU | FSEL_3 | DSE X5 */
MX93_PAD_SD2_CLK__USDHC2_CLK 0x17be
/* HYS | PD | PU | FSEL_3 | DSE X4 */
MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
/* HYS | PD | PU | FSEL_3 | DSE X3 */
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x138e
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x138e
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x138e
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x138e
/* PD | PU | FSEL_2 | DSE X3 */
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e
>;
};
pinctrl_usdhc2_uhs: usdhc2uhsgrp {
fsl,pins = <
/* HYS | PD | PU | FSEL_3 | DSE X6 */
MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe
/* HYS | PD | PU | FSEL_3 | DSE X4 */
MX93_PAD_SD2_CMD__USDHC2_CMD 0x139e
MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x139e
MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x139e
MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x139e
MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x139e
/* PD | PU | FSEL_2 | DSE X3 */
MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x50e
>;
};
};
arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi 0 → 100644
View file @ f0df584f
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
/*
* Copyright (c) 2022 TQ-Systems GmbH <linux@ew.tq-group.com>,
* D-82229 Seefeld, Germany.
* Author: Markus Niebel
*/
#include "imx93.dtsi"
/{
model = "TQ-Systems i.MX93 TQMa93xxLA/TQMa93xxCA SOM";
compatible = "tq,imx93-tqma9352", "fsl,imx93";
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
linux,cma {
compatible = "shared-dma-pool";
reusable;
alloc-ranges = <0 0x60000000 0 0x40000000>;
size = <0 0x10000000>;
linux,cma-default;
};
};
reg_v1v8: regulator-v1v8 {
compatible = "regulator-fixed";
regulator-name = "V_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
reg_v3v3: regulator-v3v3 {
compatible = "regulator-fixed";
regulator-name = "V_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
/* SD2 RST# via PMIC SW_EN */
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
regulator-name = "VSD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&reg_v3v3>;
gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&adc1 {
vref-supply = <&reg_v1v8>;
};
&flexspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexspi1>;
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
/*
* no DQS, RXCLKSRC internal loop back, max 66 MHz
* clk framework uses CLK_DIVIDER_ROUND_CLOSEST
* selected value together with root from
* IMX93_CLK_SYS_PLL_PFD1 @ 800.000.000 Hz helps to
* respect the maximum value.
*/
spi-max-frequency = <62000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
};
};
&gpio1 {
pmic-irq-hog {
gpio-hog;
gpios = <2 GPIO_ACTIVE_LOW>;
input;
line-name = "PMIC_IRQ#";
};
};
&lpi2c1 {
clock-frequency = <400000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&pinctrl_lpi2c1>;
pinctrl-1 = <&pinctrl_lpi2c1>;
status = "okay";
se97_som: temperature-sensor@1b {
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
reg = <0x1b>;
};
pcf85063: rtc@51 {
compatible = "nxp,pcf85063a";
reg = <0x51>;
quartz-load-femtofarads = <7000>;
};
eeprom0: eeprom@53 {
compatible = "nxp,se97b", "atmel,24c02";
reg = <0x53>;
pagesize = <16>;
read-only;
vcc-supply = <&reg_v3v3>;
};
eeprom1: eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
pagesize = <32>;
vcc-supply = <&reg_v3v3>;
};
/* protectable identification memory (part of M24C64-D @57) */
eeprom@5f {
compatible = "st,24c64", "atmel,24c64";
reg = <0x5f>;
size = <32>;
pagesize = <32>;
vcc-supply = <&reg_v3v3>;
};
imu@6a {
compatible = "st,ism330dhcx";
reg = <0x6a>;
vdd-supply = <&reg_v3v3>;
vddio-supply = <&reg_v3v3>;
};
};
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1>;
pinctrl-2 = <&pinctrl_usdhc1>;
bus-width = <8>;
non-removable;
no-sdio;
no-sd;
status = "okay";
};
&wdog3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
status = "okay";
};
&iomuxc {
pinctrl_flexspi1: flexspi1grp {
fsl,pins = <
MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x3fe
MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x3fe
MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x3fe
MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x3fe
MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x3fe
MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x3fe
>;
};
pinctrl_lpi2c1: lpi2c1grp {
fsl,pins = <
MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e
MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e
>;
};
pinctrl_pca9451: pca9451grp {
fsl,pins = <
MX93_PAD_I2C2_SDA__GPIO1_IO03 0x1306
>;
};
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x1306
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
/* HYS | PU | PD | FSEL_3 | X5 */
MX93_PAD_SD1_CLK__USDHC1_CLK 0x17be
MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17be
/* HYS | PU | FSEL_3 | X5 */
MX93_PAD_SD1_CMD__USDHC1_CMD 0x13be
/* HYS | PU | FSEL_3 | X4 */
MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x139e
MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x139e
MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x139e
MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x139e
MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x139e
MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x139e
MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x139e
MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x139e
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e
>;
};
};
arch/arm64/boot/dts/freescale/imx93.dtsi
View file @ f0df584f
......@@ -8,6 +8,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/fsl,imx93-power.h>
#include <dt-bindings/thermal/thermal.h>
#include "imx93-pinfunc.h"
......@@ -132,6 +133,44 @@ gic: interrupt-controller@48000000 {
interrupt-parent = <&gic>;
};
thermal-zones {
cpu-thermal {
polling-delay-passive = <250>;
polling-delay = <2000>;
thermal-sensors = <&tmu 0>;
trips {
cpu_alert: cpu-alert {
temperature = <80000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit: cpu-crit {
temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert>;
cooling-device =
<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
};
};
};
};
cm33: remoteproc-cm33 {
compatible = "fsl,imx93-cm33";
clocks = <&clk IMX93_CLK_CM33_GATE>;
status = "disabled";
};
soc@0 {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -252,7 +291,7 @@ lpspi2: spi@44370000 {
};
lpuart1: serial@44380000 {
compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x44380000 0x1000>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART1_GATE>;
......@@ -261,7 +300,7 @@ lpuart1: serial@44380000 {
};
lpuart2: serial@44390000 {
compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x44390000 0x1000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART2_GATE>;
......@@ -343,6 +382,26 @@ anatop: anatop@44480000 {
reg = <0x44480000 0x10000>;
};
tmu: tmu@44482000 {
compatible = "fsl,qoriq-tmu";
reg = <0x44482000 0x1000>;
clocks = <&clk IMX93_CLK_TMC_GATE>;
little-endian;
fsl,tmu-range = <0x800000da 0x800000e9
0x80000102 0x8000012a
0x80000166 0x800001a7
0x800001b6>;
fsl,tmu-calibration = <0x00000000 0x0000000e
0x00000001 0x00000029
0x00000002 0x00000056
0x00000003 0x000000a2
0x00000004 0x00000116
0x00000005 0x00000195
0x00000006 0x000001b2>;
#thermal-sensor-cells = <1>;
};
adc1: adc@44530000 {
compatible = "nxp,imx93-adc";
reg = <0x44530000 0x10000>;
......@@ -486,7 +545,7 @@ lpspi4: spi@42560000 {
};
lpuart3: serial@42570000 {
compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x42570000 0x1000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART3_GATE>;
......@@ -495,7 +554,7 @@ lpuart3: serial@42570000 {
};
lpuart4: serial@42580000 {
compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x42580000 0x1000>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART4_GATE>;
......@@ -504,7 +563,7 @@ lpuart4: serial@42580000 {
};
lpuart5: serial@42590000 {
compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x42590000 0x1000>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART5_GATE>;
......@@ -513,7 +572,7 @@ lpuart5: serial@42590000 {
};
lpuart6: serial@425a0000 {
compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x425a0000 0x1000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART6_GATE>;
......@@ -551,7 +610,7 @@ flexspi1: spi@425e0000 {
};
lpuart7: serial@42690000 {
compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x42690000 0x1000>;
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART7_GATE>;
......@@ -560,7 +619,7 @@ lpuart7: serial@42690000 {
};
lpuart8: serial@426a0000 {
compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart";
compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
reg = <0x426a0000 0x1000>;
interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX93_CLK_LPUART8_GATE>;
......@@ -683,7 +742,7 @@ usdhc1: mmc@42850000 {
clock-names = "ipg", "ahb", "per";
bus-width = <8>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
fsl,tuning-step = <2>;
status = "disabled";
};
......@@ -697,7 +756,7 @@ usdhc2: mmc@42860000 {
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
fsl,tuning-step = <2>;
status = "disabled";
};
......@@ -760,7 +819,7 @@ usdhc3: mmc@428b0000 {
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
fsl,tuning-start-tap = <20>;
fsl,tuning-step= <2>;
fsl,tuning-step = <2>;
status = "disabled";
};
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7