usb: gadget: fsl-mxc-udc: replace cpu_is_xxx() with platform_device_id

As mach/hardware.h is deleted, we need to use platform_device_id to
differentiate SoCs. Besides, one cpu_is_mx35 is useless as it has
already used pdata to differentiate runtime

Meanwhile we update the platform code accordingly.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

arch/arm/mach-imx/devices/devices-common.h

@@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
 
 #include <linux/fsl_devices.h>
 struct imx_fsl_usb2_udc_data {
+	const char *devid;
 	resource_size_t iobase;
 	resource_size_t irq;
 };

arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c

@@ -11,35 +11,36 @@
 #include "../hardware.h"
 #include "devices-common.h"
 
-#define imx_fsl_usb2_udc_data_entry_single(soc)				\
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid)			\
 	{								\
+		.devid = _devid,					\
 		.iobase = soc ## _USB_OTG_BASE_ADDR,			\
 		.irq = soc ## _INT_USB_OTG,				\
 	}
 
 #ifdef CONFIG_SOC_IMX25
 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX25);
+	imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX27);
+	imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
 #ifdef CONFIG_SOC_IMX31
 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX31);
+	imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
 #ifdef CONFIG_SOC_IMX35
 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX35);
+	imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
 #ifdef CONFIG_SOC_IMX51
 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX51);
+	imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
 #endif
 
 struct platform_device *__init imx_add_fsl_usb2_udc(
@@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-	return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+	return imx_add_platform_device_dmamask(data->devid, -1,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }

drivers/usb/gadget/fsl_mxc_udc.c

@@ -18,8 +18,6 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-
 static struct clk *mxc_ahb_clk;
 static struct clk *mxc_per_clk;
 static struct clk *mxc_ipg_clk;
@@ -59,7 +57,7 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 	clk_prepare_enable(mxc_per_clk);
 
 	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
-	if (!cpu_is_mx51()) {
+	if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {
 		freq = clk_get_rate(mxc_per_clk);
 		if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
 		    (freq < 59999000 || freq > 60001000)) {
@@ -82,7 +80,6 @@ int fsl_udc_clk_init(struct platform_device *pdev)
 void fsl_udc_clk_finalize(struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-	if (cpu_is_mx35()) {
 	unsigned int v;
 
 	/* workaround ENGcm09152 for i.MX35 */
@@ -93,7 +90,6 @@ void fsl_udc_clk_finalize(struct platform_device *pdev)
 			MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
 				USBPHYCTRL_OTGBASE_OFFSET));
 	}
-	}
 
 	/* ULPI transceivers don't need usbpll */
 	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {

drivers/usb/gadget/fsl_udc_core.c

@@ -41,6 +41,7 @@
 #include <linux/fsl_devices.h>
 #include <linux/dmapool.h>
 #include <linux/delay.h>
+#include <linux/of_device.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -2438,11 +2439,6 @@ static int __init fsl_udc_probe(struct platform_device *pdev)
 	unsigned int i;
 	u32 dccparams;
 
-	if (strcmp(pdev->name, driver_name)) {
-		VDBG("Wrong device");
-		return -ENODEV;
-	}
-
 	udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
 	if (udc_controller == NULL) {
 		ERR("malloc udc failed\n");
@@ -2756,13 +2752,23 @@ static int fsl_udc_otg_resume(struct device *dev)
 
 	return fsl_udc_resume(NULL);
 }
-
 /*-------------------------------------------------------------------------
 	Register entry point for the peripheral controller driver
 --------------------------------------------------------------------------*/
-
+static const struct platform_device_id fsl_udc_devtype[] = {
+	{
+		.name = "imx-udc-mx27",
+	}, {
+		.name = "imx-udc-mx51",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
 static struct platform_driver udc_driver = {
 	.remove		= __exit_p(fsl_udc_remove),
+	/* Just for FSL i.mx SoC currently */
+	.id_table	= fsl_udc_devtype,
 	/* these suspend and resume are not usb suspend and resume */
 	.suspend	= fsl_udc_suspend,
 	.resume		= fsl_udc_resume,