ARM: 5636/1: Move vendor enum to AMBA include

This moves the primecell vendor enum definition inside vic.c
out to linux/amba/bus.h where it belongs and replace any
occurances of specific vendor ID:s with the respective enums
instead.
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/common/vic.c

@@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
@@ -272,11 +273,6 @@ static struct irq_chip vic_chip = {
 static void vik_init_st(void __iomem *base, unsigned int irq_start,
 			 u32 vic_sources);
 
-enum vic_vendor {
-	VENDOR_ARM = 0x41,
-	VENDOR_ST = 0x80,
-};
-
 /**
  * vic_init - initialise a vectored interrupt controller
  * @base: iomem base address
@@ -289,7 +285,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 {
 	unsigned int i;
 	u32 cellid = 0;
-	enum vic_vendor vendor;
+	enum amba_vendor vendor;
 
 	/* Identify which VIC cell this one is, by reading the ID */
 	for (i = 0; i < 4; i++) {
@@ -301,13 +297,13 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 	       base, cellid, vendor);
 
 	switch(vendor) {
-	case VENDOR_ST:
+	case AMBA_VENDOR_ST:
 		vik_init_st(base, irq_start, vic_sources);
 		return;
 	default:
 		printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
 		/* fall through */
-	case VENDOR_ARM:
+	case AMBA_VENDOR_ARM:
 		break;
 	}
 

drivers/mmc/host/mmci.c

@@ -430,7 +430,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 				clk = 255;
 			host->cclk = host->mclk / (2 * (clk + 1));
 		}
-		if (host->hw_designer == 0x80)
+		if (host->hw_designer == AMBA_VENDOR_ST)
 			clk |= MCI_FCEN; /* Bug fix in ST IP block */
 		clk |= MCI_CLK_ENABLE;
 	}
@@ -443,7 +443,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		break;
 	case MMC_POWER_UP:
 		/* The ST version does not have this, fall through to POWER_ON */
-		if (host->hw_designer != 0x80) {
+		if (host->hw_designer != AMBA_VENDOR_ST) {
 			pwr |= MCI_PWR_UP;
 			break;
 		}
@@ -453,7 +453,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	}
 
 	if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
-		if (host->hw_designer != 0x80)
+		if (host->hw_designer != AMBA_VENDOR_ST)
 			pwr |= MCI_ROD;
 		else {
 			/*

include/linux/amba/bus.h

@@ -36,6 +36,11 @@ struct amba_driver {
 	struct amba_id		*id_table;
 };
 
+enum amba_vendor {
+	AMBA_VENDOR_ARM = 0x41,
+	AMBA_VENDOR_ST = 0x80,
+};
+
 #define amba_get_drvdata(d)	dev_get_drvdata(&d->dev)
 #define amba_set_drvdata(d,p)	dev_set_drvdata(&d->dev, p)