Skip to content

L
linux
Commit f188291a authored by Len Brown's avatar Len Brown
Browse files
Options

Pull thinkpad into release branch 

Conflicts:

	drivers/misc/Kconfig
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
parents cfaae3ee 836a53f4
Show whitespace changes
Inline Side-by-side
Showing with 5364 additions and 213 deletions
Documentation/ibm-acpi.txt → Documentation/thinkpad-acpi.txt
View file @ f188291a
IBM ThinkPad ACPI Extras Driver
ThinkPad ACPI Extras Driver
Version 0.12
17 August 2005
Version 0.14
April 21st, 2007
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
http://ibm-acpi.sf.net/
This is a Linux ACPI driver for the IBM ThinkPad laptops. It supports
various features of these laptops which are accessible through the
ACPI framework but not otherwise supported by the generic Linux ACPI
drivers.
This is a Linux driver for the IBM and Lenovo ThinkPad laptops. It
supports various features of these laptops which are accessible
through the ACPI and ACPI EC framework, but not otherwise fully
supported by the generic Linux ACPI drivers.
This driver used to be named ibm-acpi until kernel 2.6.21 and release
0.13-20070314. It used to be in the drivers/acpi tree, but it was
moved to the drivers/misc tree and renamed to thinkpad-acpi for kernel
2.6.22, and release 0.14.
Status
......@@ -32,7 +38,7 @@ detailed description):
- Experimental: embedded controller register dump
- LCD brightness control
- Volume control
- Experimental: fan speed, fan enable/disable
- Fan control and monitoring: fan speed, fan enable/disable
- Experimental: WAN enable and disable
A compatibility table by model and feature is maintained on the web
......@@ -42,6 +48,8 @@ Please include the following information in your report:
- ThinkPad model name
- a copy of your DSDT, from /proc/acpi/dsdt
- a copy of the output of dmidecode, with serial numbers
and UUIDs masked off
- which driver features work and which don't
- the observed behavior of non-working features
......@@ -52,25 +60,85 @@ Installation
------------
If you are compiling this driver as included in the Linux kernel
sources, simply enable the CONFIG_ACPI_IBM option (Power Management /
ACPI / IBM ThinkPad Laptop Extras).
sources, simply enable the CONFIG_THINKPAD_ACPI option, and optionally
enable the CONFIG_THINKPAD_ACPI_BAY option if you want the
thinkpad-specific bay functionality.
Features
--------
The driver creates the /proc/acpi/ibm directory. There is a file under
that directory for each feature described below. Note that while the
driver is still in the alpha stage, the exact proc file format and
commands supported by the various features is guaranteed to change
frequently.
The driver exports two different interfaces to userspace, which can be
used to access the features it provides. One is a legacy procfs-based
interface, which will be removed at some time in the distant future.
The other is a new sysfs-based interface which is not complete yet.
Driver version -- /proc/acpi/ibm/driver
---------------------------------------
The procfs interface creates the /proc/acpi/ibm directory. There is a
file under that directory for each feature it supports. The procfs
interface is mostly frozen, and will change very little if at all: it
will not be extended to add any new functionality in the driver, instead
all new functionality will be implemented on the sysfs interface.
The sysfs interface tries to blend in the generic Linux sysfs subsystems
and classes as much as possible. Since some of these subsystems are not
yet ready or stabilized, it is expected that this interface will change,
and any and all userspace programs must deal with it.
Notes about the sysfs interface:
Unlike what was done with the procfs interface, correctness when talking
to the sysfs interfaces will be enforced, as will correctness in the
thinkpad-acpi's implementation of sysfs interfaces.
Also, any bugs in the thinkpad-acpi sysfs driver code or in the
thinkpad-acpi's implementation of the sysfs interfaces will be fixed for
maximum correctness, even if that means changing an interface in
non-compatible ways. As these interfaces mature both in the kernel and
in thinkpad-acpi, such changes should become quite rare.
Applications interfacing to the thinkpad-acpi sysfs interfaces must
follow all sysfs guidelines and correctly process all errors (the sysfs
interface makes extensive use of errors). File descriptors and open /
close operations to the sysfs inodes must also be properly implemented.
The version of thinkpad-acpi's sysfs interface is exported by the driver
as a driver attribute (see below).
Sysfs driver attributes are on the driver's sysfs attribute space,
for 2.6.20 this is /sys/bus/platform/drivers/thinkpad-acpi/.
Sysfs device attributes are on the driver's sysfs attribute space,
for 2.6.20 this is /sys/devices/platform/thinkpad-acpi/.
Driver version
--------------
procfs: /proc/acpi/ibm/driver
sysfs driver attribute: version
The driver name and version. No commands can be written to this file.
Hot keys -- /proc/acpi/ibm/hotkey
---------------------------------
Sysfs interface version
-----------------------
sysfs driver attribute: interface_version
Version of the thinkpad-acpi sysfs interface, as an unsigned long
(output in hex format: 0xAAAABBCC), where:
AAAA - major revision
BB - minor revision
CC - bugfix revision
The sysfs interface version changelog for the driver can be found at the
end of this document. Changes to the sysfs interface done by the kernel
subsystems are not documented here, nor are they tracked by this
attribute.
Hot keys
--------
procfs: /proc/acpi/ibm/hotkey
sysfs device attribute: hotkey/*
Without this driver, only the Fn-F4 key (sleep button) generates an
ACPI event. With the driver loaded, the hotkey feature enabled and the
......@@ -84,15 +152,6 @@ All labeled Fn-Fx key combinations generate distinct events. In
addition, the lid microswitch and some docking station buttons may
also generate such events.
The following commands can be written to this file:
echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature
echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature
echo 0xffff > /proc/acpi/ibm/hotkey -- enable all possible hot keys
echo 0x0000 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
... any other 4-hex-digit mask ...
echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
The bit mask allows some control over which hot keys generate ACPI
events. Not all bits in the mask can be modified. Not all bits that
can be modified do anything. Not all hot keys can be individually
......@@ -124,15 +183,77 @@ buttons do not generate ACPI events even with this driver. They *can*
be used through the "ThinkPad Buttons" utility, see
http://www.nongnu.org/tpb/
Bluetooth -- /proc/acpi/ibm/bluetooth
-------------------------------------
procfs notes:
The following commands can be written to the /proc/acpi/ibm/hotkey file:
echo enable > /proc/acpi/ibm/hotkey -- enable the hot keys feature
echo disable > /proc/acpi/ibm/hotkey -- disable the hot keys feature
echo 0xffff > /proc/acpi/ibm/hotkey -- enable all possible hot keys
echo 0x0000 > /proc/acpi/ibm/hotkey -- disable all possible hot keys
... any other 4-hex-digit mask ...
echo reset > /proc/acpi/ibm/hotkey -- restore the original mask
sysfs notes:
The hot keys attributes are in a hotkey/ subdirectory off the
thinkpad device.
bios_enabled:
Returns the status of the hot keys feature when
thinkpad-acpi was loaded. Upon module unload, the hot
key feature status will be restored to this value.
0: hot keys were disabled
1: hot keys were enabled
bios_mask:
Returns the hot keys mask when thinkpad-acpi was loaded.
Upon module unload, the hot keys mask will be restored
to this value.
enable:
Enables/disables the hot keys feature, and reports
current status of the hot keys feature.
0: disables the hot keys feature / feature disabled
1: enables the hot keys feature / feature enabled
mask:
bit mask to enable ACPI event generation for each hot
key (see above). Returns the current status of the hot
keys mask, and allows one to modify it.
This feature shows the presence and current state of a Bluetooth
device. If Bluetooth is installed, the following commands can be used:
Bluetooth
---------
procfs: /proc/acpi/ibm/bluetooth
sysfs device attribute: bluetooth/enable
This feature shows the presence and current state of a ThinkPad
Bluetooth device in the internal ThinkPad CDC slot.
Procfs notes:
If Bluetooth is installed, the following commands can be used:
echo enable > /proc/acpi/ibm/bluetooth
echo disable > /proc/acpi/ibm/bluetooth
Sysfs notes:
If the Bluetooth CDC card is installed, it can be enabled /
disabled through the "bluetooth/enable" thinkpad-acpi device
attribute, and its current status can also be queried.
enable:
0: disables Bluetooth / Bluetooth is disabled
1: enables Bluetooth / Bluetooth is enabled.
Note: this interface will be probably be superseeded by the
generic rfkill class.
Video output control -- /proc/acpi/ibm/video
--------------------------------------------
......@@ -209,7 +330,7 @@ hot plugging of devices in the Linux ACPI framework. If the laptop was
booted while not in the dock, the following message is shown in the
logs:
Mar 17 01:42:34 aero kernel: ibm_acpi: dock device not present
Mar 17 01:42:34 aero kernel: thinkpad_acpi: dock device not present
In this case, no dock-related events are generated but the dock and
undock commands described below still work. They can be executed
......@@ -269,7 +390,7 @@ This is due to the current lack of support for hot plugging of devices
in the Linux ACPI framework. If the laptop was booted without the
UltraBay, the following message is shown in the logs:
Mar 17 01:42:34 aero kernel: ibm_acpi: bay device not present
Mar 17 01:42:34 aero kernel: thinkpad_acpi: bay device not present
In this case, no bay-related events are generated but the eject
command described below still works. It can be executed manually or
......@@ -313,23 +434,19 @@ supported. Use "eject2" instead of "eject" for the second bay.
Note: the UltraBay eject support on the 600e/x, A22p and A3x is
EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
CMOS control -- /proc/acpi/ibm/cmos
-----------------------------------
CMOS control
------------
procfs: /proc/acpi/ibm/cmos
sysfs device attribute: cmos_command
This feature is used internally by the ACPI firmware to control the
ThinkLight on most newer ThinkPad models. It may also control LCD
brightness, sounds volume and more, but only on some models.
The commands are non-negative integer numbers:
echo 0 >/proc/acpi/ibm/cmos
echo 1 >/proc/acpi/ibm/cmos
echo 2 >/proc/acpi/ibm/cmos
...
The range of valid numbers is 0 to 21, but not all have an effect and
the behavior varies from model to model. Here is the behavior on the
X40 (tpb is the ThinkPad Buttons utility):
The range of valid cmos command numbers is 0 to 21, but not all have an
effect and the behavior varies from model to model. Here is the behavior
on the X40 (tpb is the ThinkPad Buttons utility):
0 - no effect but tpb reports "Volume down"
1 - no effect but tpb reports "Volume up"
......@@ -342,6 +459,9 @@ X40 (tpb is the ThinkPad Buttons utility):
13 - ThinkLight off
14 - no effect but tpb reports ThinkLight status change
The cmos command interface is prone to firmware split-brain problems, as
in newer ThinkPads it is just a compatibility layer.
LED control -- /proc/acpi/ibm/led
---------------------------------
......@@ -393,17 +513,17 @@ X40:
16 - one medium-pitched beep repeating constantly, stop with 17
17 - stop 16
Temperature sensors -- /proc/acpi/ibm/thermal
---------------------------------------------
Temperature sensors
-------------------
procfs: /proc/acpi/ibm/thermal
sysfs device attributes: (hwmon) temp*_input
Most ThinkPads include six or more separate temperature sensors but
only expose the CPU temperature through the standard ACPI methods.
This feature shows readings from up to eight different sensors on older
ThinkPads, and it has experimental support for up to sixteen different
sensors on newer ThinkPads. Readings from sensors that are not available
return -128.
No commands can be written to this file.
sensors on newer ThinkPads.
EXPERIMENTAL: The 16-sensors feature is marked EXPERIMENTAL because the
implementation directly accesses hardware registers and may not work as
......@@ -460,6 +580,20 @@ The A31 has a very atypical layout for the thermal sensors
8: Bay Battery: secondary sensor
Procfs notes:
Readings from sensors that are not available return -128.
No commands can be written to this file.
Sysfs notes:
Sensors that are not available return the ENXIO error. This
status may change at runtime, as there are hotplug thermal
sensors, like those inside the batteries and docks.
thinkpad-acpi thermal sensors are reported through the hwmon
subsystem, and follow all of the hwmon guidelines at
Documentation/hwmon.
EXPERIMENTAL: Embedded controller register dump -- /proc/acpi/ibm/ecdump
------------------------------------------------------------------------
......@@ -533,19 +667,59 @@ registers contain the current battery capacity, etc. If you experiment
with this, do send me your results (including some complete dumps with
a description of the conditions when they were taken.)
LCD brightness control -- /proc/acpi/ibm/brightness
---------------------------------------------------
LCD brightness control
----------------------
procfs: /proc/acpi/ibm/brightness
sysfs backlight device "thinkpad_screen"
This feature allows software control of the LCD brightness on ThinkPad
models which don't have a hardware brightness slider. The available
commands are:
models which don't have a hardware brightness slider.
It has some limitations: the LCD backlight cannot be actually turned on or off
by this interface, and in many ThinkPad models, the "dim while on battery"
functionality will be enabled by the BIOS when this interface is used, and
cannot be controlled.
The backlight control has eight levels, ranging from 0 to 7. Some of the
levels may not be distinct.
Procfs notes:
The available commands are:
echo up >/proc/acpi/ibm/brightness
echo down >/proc/acpi/ibm/brightness
echo 'level <level>' >/proc/acpi/ibm/brightness
The <level> number range is 0 to 7, although not all of them may be
distinct. The current brightness level is shown in the file.
Sysfs notes:
The interface is implemented through the backlight sysfs class, which is poorly
documented at this time.
Locate the thinkpad_screen device under /sys/class/backlight, and inside it
there will be the following attributes:
max_brightness:
Reads the maximum brightness the hardware can be set to.
The minimum is always zero.
actual_brightness:
Reads what brightness the screen is set to at this instant.
brightness:
Writes request the driver to change brightness to the given
value. Reads will tell you what brightness the driver is trying
to set the display to when "power" is set to zero and the display
has not been dimmed by a kernel power management event.
power:
power management mode, where 0 is "display on", and 1 to 3 will
dim the display backlight to brightness level 0 because
thinkpad-acpi cannot really turn the backlight off. Kernel
power management events can temporarily increase the current
power management level, i.e. they can dim the display.
Volume control -- /proc/acpi/ibm/volume
---------------------------------------
......@@ -563,41 +737,42 @@ distinct. The unmute the volume after the mute command, use either the
up or down command (the level command will not unmute the volume).
The current volume level and mute state is shown in the file.
EXPERIMENTAL: fan speed, fan enable/disable -- /proc/acpi/ibm/fan
-----------------------------------------------------------------
Fan control and monitoring: fan speed, fan enable/disable
---------------------------------------------------------
This feature is marked EXPERIMENTAL because the implementation
directly accesses hardware registers and may not work as expected. USE
WITH CAUTION! To use this feature, you need to supply the
experimental=1 parameter when loading the module.
procfs: /proc/acpi/ibm/fan
sysfs device attributes: (hwmon) fan_input, pwm1, pwm1_enable
NOTE NOTE NOTE: fan control operations are disabled by default for
safety reasons. To enable them, the module parameter "fan_control=1"
must be given to thinkpad-acpi.
This feature attempts to show the current fan speed, control mode and
other fan data that might be available. The speed is read directly
from the hardware registers of the embedded controller. This is known
to work on later R, T and X series ThinkPads but may show a bogus
to work on later R, T, X and Z series ThinkPads but may show a bogus
value on other models.
Most ThinkPad fans work in "levels". Level 0 stops the fan. The higher
the level, the higher the fan speed, although adjacent levels often map
to the same fan speed. 7 is the highest level, where the fan reaches
the maximum recommended speed. Level "auto" means the EC changes the
fan level according to some internal algorithm, usually based on
readings from the thermal sensors. Level "disengaged" means the EC
disables the speed-locked closed-loop fan control, and drives the fan as
fast as it can go, which might exceed hardware limits, so use this level
with caution.
Fan levels:
The fan usually ramps up or down slowly from one speed to another,
and it is normal for the EC to take several seconds to react to fan
commands.
Most ThinkPad fans work in "levels" at the firmware interface. Level 0
stops the fan. The higher the level, the higher the fan speed, although
adjacent levels often map to the same fan speed. 7 is the highest
level, where the fan reaches the maximum recommended speed.
The fan may be enabled or disabled with the following commands:
Level "auto" means the EC changes the fan level according to some
internal algorithm, usually based on readings from the thermal sensors.
echo enable >/proc/acpi/ibm/fan
echo disable >/proc/acpi/ibm/fan
There is also a "full-speed" level, also known as "disengaged" level.
In this level, the EC disables the speed-locked closed-loop fan control,
and drives the fan as fast as it can go, which might exceed hardware
limits, so use this level with caution.
Placing a fan on level 0 is the same as disabling it. Enabling a fan
will try to place it in a safe level if it is too slow or disabled.
The fan usually ramps up or down slowly from one speed to another, and
it is normal for the EC to take several seconds to react to fan
commands. The full-speed level may take up to two minutes to ramp up to
maximum speed, and in some ThinkPads, the tachometer readings go stale
while the EC is transitioning to the full-speed level.
WARNING WARNING WARNING: do not leave the fan disabled unless you are
monitoring all of the temperature sensor readings and you are ready to
......@@ -615,46 +790,146 @@ fan is turned off when the CPU temperature drops to 49 degrees and the
HDD temperature drops to 41 degrees. These thresholds cannot
currently be controlled.
The ThinkPad's ACPI DSDT code will reprogram the fan on its own when
certain conditions are met. It will override any fan programming done
through thinkpad-acpi.
The thinkpad-acpi kernel driver can be programmed to revert the fan
level to a safe setting if userspace does not issue one of the procfs
fan commands: "enable", "disable", "level" or "watchdog", or if there
are no writes to pwm1_enable (or to pwm1 *if and only if* pwm1_enable is
set to 1, manual mode) within a configurable amount of time of up to
120 seconds. This functionality is called fan safety watchdog.
Note that the watchdog timer stops after it enables the fan. It will be
rearmed again automatically (using the same interval) when one of the
above mentioned fan commands is received. The fan watchdog is,
therefore, not suitable to protect against fan mode changes made through
means other than the "enable", "disable", and "level" procfs fan
commands, or the hwmon fan control sysfs interface.
Procfs notes:
The fan may be enabled or disabled with the following commands:
echo enable >/proc/acpi/ibm/fan
echo disable >/proc/acpi/ibm/fan
Placing a fan on level 0 is the same as disabling it. Enabling a fan
will try to place it in a safe level if it is too slow or disabled.
The fan level can be controlled with the command:
echo 'level <level>' > /proc/acpi/ibm/thermal
echo 'level <level>' > /proc/acpi/ibm/fan
Where <level> is an integer from 0 to 7, or one of the words "auto"
or "disengaged" (without the quotes). Not all ThinkPads support the
"auto" and "disengaged" levels.
Where <level> is an integer from 0 to 7, or one of the words "auto" or
"full-speed" (without the quotes). Not all ThinkPads support the "auto"
and "full-speed" levels. The driver accepts "disengaged" as an alias for
"full-speed", and reports it as "disengaged" for backwards
compatibility.
On the X31 and X40 (and ONLY on those models), the fan speed can be
controlled to a certain degree. Once the fan is running, it can be
forced to run faster or slower with the following command:
echo 'speed <speed>' > /proc/acpi/ibm/thermal
echo 'speed <speed>' > /proc/acpi/ibm/fan
The sustainable range of fan speeds on the X40 appears to be from
about 3700 to about 7350. Values outside this range either do not have
any effect or the fan speed eventually settles somewhere in that
range. The fan cannot be stopped or started with this command.
The sustainable range of fan speeds on the X40 appears to be from about
3700 to about 7350. Values outside this range either do not have any
effect or the fan speed eventually settles somewhere in that range. The
fan cannot be stopped or started with this command. This functionality
is incomplete, and not available through the sysfs interface.
The ThinkPad's ACPI DSDT code will reprogram the fan on its own when
certain conditions are met. It will override any fan programming done
through ibm-acpi.
To program the safety watchdog, use the "watchdog" command.
EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan
---------------------------------------
echo 'watchdog <interval in seconds>' > /proc/acpi/ibm/fan
If you want to disable the watchdog, use 0 as the interval.
Sysfs notes:
The sysfs interface follows the hwmon subsystem guidelines for the most
part, and the exception is the fan safety watchdog.
Writes to any of the sysfs attributes may return the EINVAL error if
that operation is not supported in a given ThinkPad or if the parameter
is out-of-bounds, and EPERM if it is forbidden. They may also return
EINTR (interrupted system call), and EIO (I/O error while trying to talk
to the firmware).
Features not yet implemented by the driver return ENOSYS.
hwmon device attribute pwm1_enable:
0: PWM offline (fan is set to full-speed mode)
1: Manual PWM control (use pwm1 to set fan level)
2: Hardware PWM control (EC "auto" mode)
3: reserved (Software PWM control, not implemented yet)
Modes 0 and 2 are not supported by all ThinkPads, and the
driver is not always able to detect this. If it does know a
mode is unsupported, it will return -EINVAL.
hwmon device attribute pwm1:
Fan level, scaled from the firmware values of 0-7 to the hwmon
scale of 0-255. 0 means fan stopped, 255 means highest normal
speed (level 7).
This attribute only commands the fan if pmw1_enable is set to 1
(manual PWM control).
hwmon device attribute fan1_input:
Fan tachometer reading, in RPM. May go stale on certain
ThinkPads while the EC transitions the PWM to offline mode,
which can take up to two minutes. May return rubbish on older
ThinkPads.
driver attribute fan_watchdog:
Fan safety watchdog timer interval, in seconds. Minimum is
1 second, maximum is 120 seconds. 0 disables the watchdog.
To stop the fan: set pwm1 to zero, and pwm1_enable to 1.
To start the fan in a safe mode: set pwm1_enable to 2. If that fails
with EINVAL, try to set pwm1_enable to 1 and pwm1 to at least 128 (255
would be the safest choice, though).
EXPERIMENTAL: WAN
-----------------
procfs: /proc/acpi/ibm/wan
sysfs device attribute: wwan/enable
This feature is marked EXPERIMENTAL because the implementation
directly accesses hardware registers and may not work as expected. USE
WITH CAUTION! To use this feature, you need to supply the
experimental=1 parameter when loading the module.
This feature shows the presence and current state of a WAN (Sierra
Wireless EV-DO) device. If WAN is installed, the following commands can
be used:
This feature shows the presence and current state of a W-WAN (Sierra
Wireless EV-DO) device.
It was tested on a Lenovo Thinkpad X60. It should probably work on other
Thinkpad models which come with this module installed.
Procfs notes:
If the W-WAN card is installed, the following commands can be used:
echo enable > /proc/acpi/ibm/wan
echo disable > /proc/acpi/ibm/wan
It was tested on a Lenovo Thinkpad X60. It should probably work on other
Thinkpad models which come with this module installed.
Sysfs notes:
If the W-WAN card is installed, it can be enabled /
disabled through the "wwan/enable" thinkpad-acpi device
attribute, and its current status can also be queried.
enable:
0: disables WWAN card / WWAN card is disabled
1: enables WWAN card / WWAN card is enabled.
Note: this interface will be probably be superseeded by the
generic rfkill class.
Multiple Commands, Module Parameters
------------------------------------
......@@ -665,64 +940,42 @@ separating them with commas, for example:
echo enable,0xffff > /proc/acpi/ibm/hotkey
echo lcd_disable,crt_enable > /proc/acpi/ibm/video
Commands can also be specified when loading the ibm_acpi module, for
example:
modprobe ibm_acpi hotkey=enable,0xffff video=auto_disable
The ibm-acpi kernel driver can be programmed to revert the fan level
to a safe setting if userspace does not issue one of the fan commands:
"enable", "disable", "level" or "watchdog" within a configurable
ammount of time. To do this, use the "watchdog" command.
echo 'watchdog <interval>' > /proc/acpi/ibm/fan
Interval is the ammount of time in seconds to wait for one of the
above mentioned fan commands before reseting the fan level to a safe
one. If set to zero, the watchdog is disabled (default). When the
watchdog timer runs out, it does the exact equivalent of the "enable"
fan command.
Note that the watchdog timer stops after it enables the fan. It will
be rearmed again automatically (using the same interval) when one of
the above mentioned fan commands is received. The fan watchdog is,
therefore, not suitable to protect against fan mode changes made
through means other than the "enable", "disable", and "level" fan
commands.
Example Configuration
---------------------
The ACPI support in the kernel is intended to be used in conjunction
with a user-space daemon, acpid. The configuration files for this
daemon control what actions are taken in response to various ACPI
events. An example set of configuration files are included in the
config/ directory of the tarball package available on the web
site. Note that these are provided for illustration purposes only and
may need to be adapted to your particular setup.
The following utility scripts are used by the example action
scripts (included with ibm-acpi for completeness):
/usr/local/sbin/idectl -- from the hdparm source distribution,
see http://www.ibiblio.org/pub/Linux/system/hardware
/usr/local/sbin/laptop_mode -- from the Linux kernel source
distribution, see Documentation/laptop-mode.txt
/sbin/service -- comes with Redhat/Fedora distributions
/usr/sbin/hibernate -- from the Software Suspend 2 distribution,
see http://softwaresuspend.berlios.de/
Toan T Nguyen <ntt@physics.ucla.edu> notes that Suse uses the
powersave program to suspend ('powersave --suspend-to-ram') or
hibernate ('powersave --suspend-to-disk'). This means that the
hibernate script is not needed on that distribution.
Henrik Brix Andersen <brix@gentoo.org> has written a Gentoo ACPI event
handler script for the X31. You can get the latest version from
http://dev.gentoo.org/~brix/files/x31.sh
David Schweikert <dws@ee.eth.ch> has written an alternative blank.sh
script which works on Debian systems. This scripts has now been
extended to also work on Fedora systems and included as the default
blank.sh in the distribution.
Commands can also be specified when loading the thinkpad-acpi module,
for example:
modprobe thinkpad_acpi hotkey=enable,0xffff video=auto_disable
Enabling debugging output
-------------------------
The module takes a debug paramater which can be used to selectively
enable various classes of debugging output, for example:
modprobe ibm_acpi debug=0xffff
will enable all debugging output classes. It takes a bitmask, so
to enable more than one output class, just add their values.
Debug bitmask Description
0x0001 Initialization and probing
0x0002 Removal
There is also a kernel build option to enable more debugging
information, which may be necessary to debug driver problems.
The level of debugging information output by the driver can be changed
at runtime through sysfs, using the driver attribute debug_level. The
attribute takes the same bitmask as the debug module parameter above.
Force loading of module
-----------------------
If thinkpad-acpi refuses to detect your ThinkPad, you can try to specify
the module parameter force_load=1. Regardless of whether this works or
not, please contact ibm-acpi-devel@lists.sourceforge.net with a report.
Sysfs interface changelog:
0x000100: Initial sysfs support, as a single platform driver and
device.
MAINTAINERS
View file @ f188291a
......@@ -1632,15 +1632,6 @@ W: http://www.ia64-linux.org/
T: git kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6.git
S: Maintained
IBM ACPI EXTRAS DRIVER
P: Henrique de Moraes Holschuh
M: ibm-acpi@hmh.eng.br
L: ibm-acpi-devel@lists.sourceforge.net
W: http://ibm-acpi.sourceforge.net
W: http://thinkwiki.org/wiki/Ibm-acpi
T: git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
S: Maintained
SN-IA64 (Itanium) SUB-PLATFORM
P: Jes Sorensen
M: jes@sgi.com
......@@ -3121,6 +3112,15 @@ P: Chris Zankel
M: chris@zankel.net
S: Maintained
THINKPAD ACPI EXTRAS DRIVER
P: Henrique de Moraes Holschuh
M: ibm-acpi@hmh.eng.br
L: ibm-acpi-devel@lists.sourceforge.net
W: http://ibm-acpi.sourceforge.net
W: http://thinkwiki.org/wiki/Ibm-acpi
T: git repo.or.cz/linux-2.6/linux-acpi-2.6/ibm-acpi-2.6.git
S: Maintained
UltraSPARC (sparc64):
P: David S. Miller
M: davem@davemloft.net
......
drivers/acpi/Kconfig
View file @ f188291a
......@@ -218,43 +218,6 @@ config ACPI_ASUS
NOTE: This driver is deprecated and will probably be removed soon,
use asus-laptop instead.
config ACPI_IBM
tristate "IBM ThinkPad Laptop Extras"
depends on X86
select BACKLIGHT_CLASS_DEVICE
---help---
This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
output switching, ThinkLight control, UltraBay eject and more.
For more information about this driver see <file:Documentation/ibm-acpi.txt>
and <http://ibm-acpi.sf.net/> .
If you have an IBM ThinkPad laptop, say Y or M here.
config ACPI_IBM_DOCK
bool "Legacy Docking Station Support"
depends on ACPI_IBM
depends on ACPI_DOCK=n
default n
---help---
Allows the ibm_acpi driver to handle docking station events.
This support is obsoleted by CONFIG_HOTPLUG_PCI_ACPI. It will
allow locking and removing the laptop from the docking station,
but will not properly connect PCI devices.
If you are not sure, say N here.
config ACPI_IBM_BAY
bool "Legacy Removable Bay Support"
depends on ACPI_IBM
default y
---help---
Allows the ibm_acpi driver to handle removable bays. It will allow
disabling the device in the bay, and also generate notifications when
the bay lever is ejected or inserted.
If you are not sure, say Y here.
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on X86
......
drivers/acpi/Makefile
View file @ f188291a
......@@ -55,7 +55,6 @@ obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o
obj-$(CONFIG_ACPI_DEBUG) += debug.o
obj-$(CONFIG_ACPI_NUMA) += numa.o
obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o
obj-$(CONFIG_ACPI_IBM) += ibm_acpi.o
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o
obj-y += cm_sbs.o
......
drivers/misc/Kconfig
View file @ f188291a
......@@ -127,4 +127,55 @@ config SONY_LAPTOP_OLD
---help---
Build the sonypi driver compatibility code into the sony-laptop driver.
config THINKPAD_ACPI
tristate "ThinkPad ACPI Laptop Extras"
depends on X86 && ACPI
select BACKLIGHT_CLASS_DEVICE
select HWMON
---help---
This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
output switching, ThinkLight control, UltraBay eject and more.
For more information about this driver see
<file:Documentation/thinkpad-acpi.txt> and <http://ibm-acpi.sf.net/> .
This driver was formely known as ibm-acpi.
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
config THINKPAD_ACPI_DEBUG
bool "Verbose debug mode"
depends on THINKPAD_ACPI
default n
---help---
Enables extra debugging information, at the expense of a slightly
increase in driver size.
If you are not sure, say N here.
config THINKPAD_ACPI_DOCK
bool "Legacy Docking Station Support"
depends on THINKPAD_ACPI
depends on ACPI_DOCK=n
default n
---help---
Allows the thinkpad_acpi driver to handle docking station events.
This support was made obsolete by the generic ACPI docking station
support (CONFIG_ACPI_DOCK). It will allow locking and removing the
laptop from the docking station, but will not properly connect PCI
devices.
If you are not sure, say N here.
config THINKPAD_ACPI_BAY
bool "Legacy Removable Bay Support"
depends on THINKPAD_ACPI
default y
---help---
Allows the thinkpad_acpi driver to handle removable bays. It will
eletrically disable the device in the bay, and also generate
notifications when the bay lever is ejected or inserted.
If you are not sure, say Y here.
endmenu
drivers/misc/Makefile
View file @ f188291a
......@@ -12,3 +12,4 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
obj-$(CONFIG_SGI_IOC4) += ioc4.o
obj-$(CONFIG_SONY_LAPTOP) += sony-laptop.o
obj-$(CONFIG_THINKPAD_ACPI) += thinkpad_acpi.o
drivers/acpi/ibm_acpi.c → drivers/misc/thinkpad_acpi.c
View file @ f188291a
This source diff could not be displayed because it is too large. You can view the blob instead.
drivers/misc/thinkpad_acpi.h 0 → 100644
View file @ f188291a
/*
* thinkpad_acpi.h - ThinkPad ACPI Extras
*
*
* Copyright (C) 2004-2005 Borislav Deianov <borislav@users.sf.net>
* Copyright (C) 2006-2007 Henrique de Moraes Holschuh <hmh@hmh.eng.br>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*/
#ifndef __THINKPAD_ACPI_H__
#define __THINKPAD_ACPI_H__
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/proc_fs.h>
#include <linux/sysfs.h>
#include <linux/backlight.h>
#include <linux/fb.h>
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <asm/uaccess.h>
#include <linux/dmi.h>
#include <linux/jiffies.h>
#include <linux/workqueue.h>
#include <acpi/acpi_drivers.h>
#include <acpi/acnamesp.h>
/****************************************************************************
* Main driver
*/
#define IBM_NAME "thinkpad"
#define IBM_DESC "ThinkPad ACPI Extras"
#define IBM_FILE "thinkpad_acpi"
#define IBM_URL "http://ibm-acpi.sf.net/"
#define IBM_MAIL "ibm-acpi-devel@lists.sourceforge.net"
#define IBM_PROC_DIR "ibm"
#define IBM_ACPI_EVENT_PREFIX "ibm"
#define IBM_DRVR_NAME IBM_FILE
#define IBM_LOG IBM_FILE ": "
#define IBM_ERR KERN_ERR IBM_LOG
#define IBM_NOTICE KERN_NOTICE IBM_LOG
#define IBM_INFO KERN_INFO IBM_LOG
#define IBM_DEBUG KERN_DEBUG IBM_LOG
#define IBM_MAX_ACPI_ARGS 3
/* ThinkPad CMOS commands */
#define TP_CMOS_VOLUME_DOWN 0
#define TP_CMOS_VOLUME_UP 1
#define TP_CMOS_VOLUME_MUTE 2
#define TP_CMOS_BRIGHTNESS_UP 4
#define TP_CMOS_BRIGHTNESS_DOWN 5
#define onoff(status,bit) ((status) & (1 << (bit)) ? "on" : "off")
#define enabled(status,bit) ((status) & (1 << (bit)) ? "enabled" : "disabled")
#define strlencmp(a,b) (strncmp((a), (b), strlen(b)))
/* Debugging */
#define TPACPI_DBG_ALL 0xffff
#define TPACPI_DBG_ALL 0xffff
#define TPACPI_DBG_INIT 0x0001
#define TPACPI_DBG_EXIT 0x0002
#define dbg_printk(a_dbg_level, format, arg...) \
do { if (dbg_level & a_dbg_level) \
printk(IBM_DEBUG "%s: " format, __func__ , ## arg); } while (0)
#ifdef CONFIG_THINKPAD_ACPI_DEBUG
#define vdbg_printk(a_dbg_level, format, arg...) \
dbg_printk(a_dbg_level, format, ## arg)
static const char *str_supported(int is_supported);
#else
#define vdbg_printk(a_dbg_level, format, arg...)
#endif
/* ACPI HIDs */
#define IBM_HKEY_HID "IBM0068"
#define IBM_PCI_HID "PNP0A03"
/* ACPI helpers */
static int __must_check acpi_evalf(acpi_handle handle,
void *res, char *method, char *fmt, ...);
static int __must_check acpi_ec_read(int i, u8 * p);
static int __must_check acpi_ec_write(int i, u8 v);
static int __must_check _sta(acpi_handle handle);
/* ACPI handles */
static acpi_handle root_handle; /* root namespace */
static acpi_handle ec_handle; /* EC */
static acpi_handle ecrd_handle, ecwr_handle; /* 570 EC access */
static acpi_handle cmos_handle, hkey_handle; /* basic thinkpad handles */
static void drv_acpi_handle_init(char *name,
acpi_handle *handle, acpi_handle parent,
char **paths, int num_paths, char **path);
#define IBM_ACPIHANDLE_INIT(object) \
drv_acpi_handle_init(#object, &object##_handle, *object##_parent, \
object##_paths, ARRAY_SIZE(object##_paths), &object##_path)
/* ThinkPad ACPI helpers */
static int issue_thinkpad_cmos_command(int cmos_cmd);
/* procfs support */
static struct proc_dir_entry *proc_dir;
/* procfs helpers */
static int dispatch_procfs_read(char *page, char **start, off_t off,
int count, int *eof, void *data);
static int dispatch_procfs_write(struct file *file,
const char __user * userbuf,
unsigned long count, void *data);
static char *next_cmd(char **cmds);
/* sysfs support */
struct attribute_set {
unsigned int members, max_members;
struct attribute_group group;
};
static struct attribute_set *create_attr_set(unsigned int max_members,
const char* name);
#define destroy_attr_set(_set) \
kfree(_set);
static int add_to_attr_set(struct attribute_set* s, struct attribute *attr);
static int add_many_to_attr_set(struct attribute_set* s,
struct attribute **attr,
unsigned int count);
#define register_attr_set_with_sysfs(_attr_set, _kobj) \
sysfs_create_group(_kobj, &_attr_set->group)
static void delete_attr_set(struct attribute_set* s, struct kobject *kobj);
static int parse_strtoul(const char *buf, unsigned long max,
unsigned long *value);
/* Device model */
static struct platform_device *tpacpi_pdev;
static struct class_device *tpacpi_hwmon;
static struct platform_driver tpacpi_pdriver;
static int tpacpi_create_driver_attributes(struct device_driver *drv);
static void tpacpi_remove_driver_attributes(struct device_driver *drv);
/* Module */
static int experimental;
static u32 dbg_level;
static int force_load;
static char *ibm_thinkpad_ec_found;
static char* check_dmi_for_ec(void);
static int thinkpad_acpi_module_init(void);
static void thinkpad_acpi_module_exit(void);
/****************************************************************************
* Subdrivers
*/
struct ibm_struct;
struct tp_acpi_drv_struct {
char *hid;
struct acpi_driver *driver;
void (*notify) (struct ibm_struct *, u32);
acpi_handle *handle;
u32 type;
struct acpi_device *device;
};
struct ibm_struct {
char *name;
int (*read) (char *);
int (*write) (char *);
void (*exit) (void);
struct list_head all_drivers;
struct tp_acpi_drv_struct *acpi;
struct {
u8 acpi_driver_registered:1;
u8 acpi_notify_installed:1;
u8 proc_created:1;
u8 init_called:1;
u8 experimental:1;
} flags;
};
struct ibm_init_struct {
char param[32];
int (*init) (struct ibm_init_struct *);
struct ibm_struct *data;
};
static struct {
#ifdef CONFIG_THINKPAD_ACPI_BAY
u16 bay_status:1;
u16 bay_eject:1;
u16 bay_status2:1;
u16 bay_eject2:1;
#endif
u16 bluetooth:1;
u16 hotkey:1;
u16 hotkey_mask:1;
u16 light:1;
u16 light_status:1;
u16 wan:1;
u16 fan_ctrl_status_undef:1;
} tp_features;
static struct list_head tpacpi_all_drivers;
static struct ibm_init_struct ibms_init[];
static int set_ibm_param(const char *val, struct kernel_param *kp);
static int ibm_init(struct ibm_init_struct *iibm);
static void ibm_exit(struct ibm_struct *ibm);
/*
* procfs master subdriver
*/
static int thinkpad_acpi_driver_init(struct ibm_init_struct *iibm);
static int thinkpad_acpi_driver_read(char *p);
/*
* Bay subdriver
*/
#ifdef CONFIG_THINKPAD_ACPI_BAY
static acpi_handle bay_handle, bay_ej_handle;
static acpi_handle bay2_handle, bay2_ej_handle;
static int bay_init(struct ibm_init_struct *iibm);
static void bay_notify(struct ibm_struct *ibm, u32 event);
static int bay_read(char *p);
static int bay_write(char *buf);
#endif /* CONFIG_THINKPAD_ACPI_BAY */
/*
* Beep subdriver
*/
static acpi_handle beep_handle;
static int beep_read(char *p);
static int beep_write(char *buf);
/*
* Bluetooth subdriver
*/
#define TPACPI_BLUETH_SYSFS_GROUP "bluetooth"
enum {
/* ACPI GBDC/SBDC bits */
TP_ACPI_BLUETOOTH_HWPRESENT = 0x01, /* Bluetooth hw available */
TP_ACPI_BLUETOOTH_RADIOSSW = 0x02, /* Bluetooth radio enabled */
TP_ACPI_BLUETOOTH_UNK = 0x04, /* unknown function */
};
static int bluetooth_init(struct ibm_init_struct *iibm);
static int bluetooth_get_radiosw(void);
static int bluetooth_set_radiosw(int radio_on);
static int bluetooth_read(char *p);
static int bluetooth_write(char *buf);
/*
* Brightness (backlight) subdriver
*/
#define TPACPI_BACKLIGHT_DEV_NAME "thinkpad_screen"
static struct backlight_device *ibm_backlight_device;
static int brightness_offset = 0x31;
static int brightness_init(struct ibm_init_struct *iibm);
static void brightness_exit(void);
static int brightness_get(struct backlight_device *bd);
static int brightness_set(int value);
static int brightness_update_status(struct backlight_device *bd);
static int brightness_read(char *p);
static int brightness_write(char *buf);
/*
* CMOS subdriver
*/
static int cmos_read(char *p);
static int cmos_write(char *buf);
/*
* Dock subdriver
*/
#ifdef CONFIG_THINKPAD_ACPI_DOCK
static acpi_handle pci_handle;
static acpi_handle dock_handle;
static void dock_notify(struct ibm_struct *ibm, u32 event);
static int dock_read(char *p);
static int dock_write(char *buf);
#endif /* CONFIG_THINKPAD_ACPI_DOCK */
/*
* EC dump subdriver
*/
static int ecdump_read(char *p) ;
static int ecdump_write(char *buf);
/*
* Fan subdriver
*/
enum { /* Fan control constants */
fan_status_offset = 0x2f, /* EC register 0x2f */
fan_rpm_offset = 0x84, /* EC register 0x84: LSB, 0x85 MSB (RPM)
* 0x84 must be read before 0x85 */
TP_EC_FAN_FULLSPEED = 0x40, /* EC fan mode: full speed */
TP_EC_FAN_AUTO = 0x80, /* EC fan mode: auto fan control */
TPACPI_FAN_LAST_LEVEL = 0x100, /* Use cached last-seen fan level */
};
enum fan_status_access_mode {
TPACPI_FAN_NONE = 0, /* No fan status or control */
TPACPI_FAN_RD_ACPI_GFAN, /* Use ACPI GFAN */
TPACPI_FAN_RD_TPEC, /* Use ACPI EC regs 0x2f, 0x84-0x85 */
};
enum fan_control_access_mode {
TPACPI_FAN_WR_NONE = 0, /* No fan control */
TPACPI_FAN_WR_ACPI_SFAN, /* Use ACPI SFAN */
TPACPI_FAN_WR_TPEC, /* Use ACPI EC reg 0x2f */
TPACPI_FAN_WR_ACPI_FANS, /* Use ACPI FANS and EC reg 0x2f */
};
enum fan_control_commands {
TPACPI_FAN_CMD_SPEED = 0x0001, /* speed command */
TPACPI_FAN_CMD_LEVEL = 0x0002, /* level command */
TPACPI_FAN_CMD_ENABLE = 0x0004, /* enable/disable cmd,
* and also watchdog cmd */
};
static int fan_control_allowed;
static enum fan_status_access_mode fan_status_access_mode;
static enum fan_control_access_mode fan_control_access_mode;
static enum fan_control_commands fan_control_commands;
static u8 fan_control_initial_status;
static u8 fan_control_desired_level;
static int fan_watchdog_maxinterval;
static struct mutex fan_mutex;
static acpi_handle fans_handle, gfan_handle, sfan_handle;
static int fan_init(struct ibm_init_struct *iibm);
static void fan_exit(void);
static int fan_get_status(u8 *status);
static int fan_get_status_safe(u8 *status);
static int fan_get_speed(unsigned int *speed);
static void fan_update_desired_level(u8 status);
static void fan_watchdog_fire(struct work_struct *ignored);
static void fan_watchdog_reset(void);
static int fan_set_level(int level);
static int fan_set_level_safe(int level);
static int fan_set_enable(void);
static int fan_set_disable(void);
static int fan_set_speed(int speed);
static int fan_read(char *p);
static int fan_write(char *buf);
static int fan_write_cmd_level(const char *cmd, int *rc);
static int fan_write_cmd_enable(const char *cmd, int *rc);
static int fan_write_cmd_disable(const char *cmd, int *rc);
static int fan_write_cmd_speed(const char *cmd, int *rc);
static int fan_write_cmd_watchdog(const char *cmd, int *rc);
/*
* Hotkey subdriver
*/
#define TPACPI_HOTKEY_SYSFS_GROUP "hotkey"
static int hotkey_orig_status;
static int hotkey_orig_mask;
static struct mutex hotkey_mutex;
static int hotkey_init(struct ibm_init_struct *iibm);
static void hotkey_exit(void);
static int hotkey_get(int *status, int *mask);
static int hotkey_set(int status, int mask);
static void hotkey_notify(struct ibm_struct *ibm, u32 event);
static int hotkey_read(char *p);
static int hotkey_write(char *buf);
/*
* LED subdriver
*/
enum led_access_mode {
TPACPI_LED_NONE = 0,
TPACPI_LED_570, /* 570 */
TPACPI_LED_OLD, /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20-21 */
TPACPI_LED_NEW, /* all others */
};
enum { /* For TPACPI_LED_OLD */
TPACPI_LED_EC_HLCL = 0x0c, /* EC reg to get led to power on */
TPACPI_LED_EC_HLBL = 0x0d, /* EC reg to blink a lit led */
TPACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */
};
static enum led_access_mode led_supported;
static acpi_handle led_handle;
static int led_init(struct ibm_init_struct *iibm);
static int led_read(char *p);
static int led_write(char *buf);
/*
* Light (thinklight) subdriver
*/
static acpi_handle lght_handle, ledb_handle;
static int light_init(struct ibm_init_struct *iibm);
static int light_read(char *p);
static int light_write(char *buf);
/*
* Thermal subdriver
*/
enum thermal_access_mode {
TPACPI_THERMAL_NONE = 0, /* No thermal support */
TPACPI_THERMAL_ACPI_TMP07, /* Use ACPI TMP0-7 */
TPACPI_THERMAL_ACPI_UPDT, /* Use ACPI TMP0-7 with UPDT */
TPACPI_THERMAL_TPEC_8, /* Use ACPI EC regs, 8 sensors */
TPACPI_THERMAL_TPEC_16, /* Use ACPI EC regs, 16 sensors */
};
enum { /* TPACPI_THERMAL_TPEC_* */
TP_EC_THERMAL_TMP0 = 0x78, /* ACPI EC regs TMP 0..7 */
TP_EC_THERMAL_TMP8 = 0xC0, /* ACPI EC regs TMP 8..15 */
TP_EC_THERMAL_TMP_NA = -128, /* ACPI EC sensor not available */
};
#define TPACPI_MAX_THERMAL_SENSORS 16 /* Max thermal sensors supported */
struct ibm_thermal_sensors_struct {
s32 temp[TPACPI_MAX_THERMAL_SENSORS];
};
static enum thermal_access_mode thermal_read_mode;
static int thermal_init(struct ibm_init_struct *iibm);
static int thermal_get_sensor(int idx, s32 *value);
static int thermal_get_sensors(struct ibm_thermal_sensors_struct *s);
static int thermal_read(char *p);
/*
* Video subdriver
*/
enum video_access_mode {
TPACPI_VIDEO_NONE = 0,
TPACPI_VIDEO_570, /* 570 */
TPACPI_VIDEO_770, /* 600e/x, 770e, 770x */
TPACPI_VIDEO_NEW, /* all others */
};
enum { /* video status flags, based on VIDEO_570 */
TP_ACPI_VIDEO_S_LCD = 0x01, /* LCD output enabled */
TP_ACPI_VIDEO_S_CRT = 0x02, /* CRT output enabled */
TP_ACPI_VIDEO_S_DVI = 0x08, /* DVI output enabled */
};
enum { /* TPACPI_VIDEO_570 constants */
TP_ACPI_VIDEO_570_PHSCMD = 0x87, /* unknown magic constant :( */
TP_ACPI_VIDEO_570_PHSMASK = 0x03, /* PHS bits that map to
* video_status_flags */
TP_ACPI_VIDEO_570_PHS2CMD = 0x8b, /* unknown magic constant :( */
TP_ACPI_VIDEO_570_PHS2SET = 0x80, /* unknown magic constant :( */
};
static enum video_access_mode video_supported;
static int video_orig_autosw;
static acpi_handle vid_handle, vid2_handle;
static int video_init(struct ibm_init_struct *iibm);
static void video_exit(void);
static int video_outputsw_get(void);
static int video_outputsw_set(int status);
static int video_autosw_get(void);
static int video_autosw_set(int enable);
static int video_outputsw_cycle(void);
static int video_expand_toggle(void);
static int video_read(char *p);
static int video_write(char *buf);
/*
* Volume subdriver
*/
static int volume_offset = 0x30;
static int volume_read(char *p);
static int volume_write(char *buf);
/*
* Wan subdriver
*/
#define TPACPI_WAN_SYSFS_GROUP "wwan"
enum {
/* ACPI GWAN/SWAN bits */
TP_ACPI_WANCARD_HWPRESENT = 0x01, /* Wan hw available */
TP_ACPI_WANCARD_RADIOSSW = 0x02, /* Wan radio enabled */
TP_ACPI_WANCARD_UNK = 0x04, /* unknown function */
};
static int wan_init(struct ibm_init_struct *iibm);
static int wan_get_radiosw(void);
static int wan_set_radiosw(int radio_on);
static int wan_read(char *p);
static int wan_write(char *buf);
#endif /* __THINKPAD_ACPI_H */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7