ARM: dts: Bump Gemini platforms to use 100ms debounce

The 50ms debounce is too low and give ghost bounces on some
platforms. Bump it to 100ms to make it stable.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

arch/arm/boot/dts/gemini-dlink-dir-685.dts

@@ -28,7 +28,7 @@ gpio_keys {
 		compatible = "gpio-keys";
 
 		button-esc {
-			debounce-interval = <50>;
+			debounce-interval = <100>;
 			wakeup-source;
 			linux,code = <KEY_ESC>;
 			label = "reset";
@@ -36,7 +36,7 @@ button-esc {
 			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 		};
 		button-eject {
-			debounce-interval = <50>;
+			debounce-interval = <100>;
 			wakeup-source;
 			linux,code = <KEY_EJECTCD>;
 			label = "unmount";

arch/arm/boot/dts/gemini-dlink-dns-313.dts

@@ -34,7 +34,7 @@ gpio_keys {
 		compatible = "gpio-keys";
 
 		button-esc {
-			debounce-interval = <50>;
+			debounce-interval = <100>;
 			wakeup-source;
 			linux,code = <KEY_ESC>;
 			label = "reset";

arch/arm/boot/dts/gemini-nas4220b.dts

@@ -28,7 +28,7 @@ gpio_keys {
 		compatible = "gpio-keys";
 
 		button-setup {
-			debounce-interval = <50>;
+			debounce-interval = <100>;
 			wakeup-source;
 			linux,code = <KEY_SETUP>;
 			label = "Backup button";
@@ -36,7 +36,7 @@ button-setup {
 			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
 		};
 		button-restart {
-			debounce-interval = <50>;
+			debounce-interval = <100>;
 			wakeup-source;
 			linux,code = <KEY_RESTART>;
 			label = "Softreset button";

arch/arm/boot/dts/gemini-rut1xx.dts

@@ -28,7 +28,7 @@ gpio_keys {
 		compatible = "gpio-keys";
 
 		button-setup {
-			debounce-interval = <50>;
+			debounce-interval = <100>;
 			wakeup-source;
 			linux,code = <KEY_SETUP>;
 			label = "Reset to defaults";

arch/arm/boot/dts/gemini-sq201.dts

@@ -28,7 +28,7 @@ gpio_keys {
 		compatible = "gpio-keys";
 
 		button-setup {
-			debounce-interval = <50>;
+			debounce-interval = <100>;
 			wakeup-source;
 			linux,code = <KEY_SETUP>;
 			label = "factory reset";

arch/arm/boot/dts/gemini-wbd111.dts

@@ -29,7 +29,7 @@ gpio_keys {
 		compatible = "gpio-keys";
 
 		button-setup {
-			debounce-interval = <50>;
+			debounce-interval = <100>;
 			wakeup-source;
 			linux,code = <KEY_SETUP>;
 			label = "reset";

arch/arm/boot/dts/gemini-wbd222.dts

@@ -28,7 +28,7 @@ gpio_keys {
 		compatible = "gpio-keys";
 
 		button-setup {
-			debounce-interval = <50>;
+			debounce-interval = <100>;
 			wakeup-source;
 			linux,code = <KEY_SETUP>;
 			label = "reset";