bnxt_en: Extend autoneg to all speeds.

Allow all autoneg speeds aupported by firmware to be advertised.  If
the advertising parameter is 0, then all supported speeds will be
advertised.

Remove BNXT_ALL_COPPER_ETHTOOL_SPEED which is no longer used as all
supported speeds can be advertised.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnxt/bnxt.h

@@ -757,10 +757,6 @@ struct bnxt_ntuple_filter {
 #define BNXT_FLTR_UPDATE	1
 };
 
-#define BNXT_ALL_COPPER_ETHTOOL_SPEED				\
-	(ADVERTISED_100baseT_Full | ADVERTISED_1000baseT_Full |	\
-	 ADVERTISED_10000baseT_Full)
-
 struct bnxt_link_info {
 	u8			media_type;
 	u8			transceiver;

drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c

@@ -696,16 +696,10 @@ static int bnxt_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 		return rc;
 
 	if (cmd->autoneg == AUTONEG_ENABLE) {
-		if (link_info->media_type != PORT_PHY_QCFG_RESP_MEDIA_TYPE_TP) {
-			netdev_err(dev, "Media type doesn't support autoneg\n");
-			rc = -EINVAL;
-			goto set_setting_exit;
-		}
-		if (cmd->advertising & ~(BNXT_ALL_COPPER_ETHTOOL_SPEED |
-					 ADVERTISED_Autoneg |
-					 ADVERTISED_TP |
-					 ADVERTISED_Pause |
-					 ADVERTISED_Asym_Pause)) {
+		u32 supported_spds = bnxt_fw_to_ethtool_support_spds(link_info);
+
+		if (cmd->advertising & ~(supported_spds | ADVERTISED_Autoneg |
+					 ADVERTISED_TP | ADVERTISED_FIBRE)) {
 			netdev_err(dev, "Unsupported advertising mask (adv: 0x%x)\n",
 				   cmd->advertising);
 			rc = -EINVAL;