Commit f1bcefde authored by Sherry Sun's avatar Sherry Sun Committed by Shawn Guo

arm64: dts: imx8dxl: remove "fsl,imx7ulp-lpuart" compatible for imx8dxl

Drop the i.MX8DXL backwards compatibility with i.MX7ULP since they
differ from clocks handling point of view.

dtbs_check has the following warnings:
linux-next/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: serial@5a060000: compatible: 'oneOf' conditional failed, one must be fixed:
        ['fsl,imx8qxp-lpuart', 'fsl,imx7ulp-lpuart'] is too long
        'fsl,imx93-lpuart' was expected
        'fsl,imx8qxp-lpuart' is not one of ['fsl,imx8qm-lpuart', 'fsl,imx8dxl-lpuart']
        'fsl,imxrt1050-lpuart' was expected
        'fsl,imx8ulp-lpuart' was expected
        'fsl,imx8qxp-lpuart' was expected
        'fsl,imxrt1170-lpuart' was expected
        From schema: linux-next/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
Signed-off-by: default avatarSherry Sun <sherry.sun@nxp.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent e1da7294
...@@ -36,22 +36,22 @@ &i2c3 { ...@@ -36,22 +36,22 @@ &i2c3 {
}; };
&lpuart0 { &lpuart0 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
}; };
&lpuart1 { &lpuart1 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
}; };
&lpuart2 { &lpuart2 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
}; };
&lpuart3 { &lpuart3 {
compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart";
interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment