hwmon: Add NPCM7xx PWM and Fan driver

Add Nuvoton BMC NPCM750/730/715/705 Pulse Width Modulation (PWM)
and Fan tacho driver.

The Nuvoton BMC NPCM750/730/715/705 supports 8 PWM controller outputs
and 16 Fan controller inputs.

The driver provides a sysfs entries through which the user can
configure the duty-cycle value from 0(off) and 255(full speed)
and read the fan tacho rpm value.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Documentation/hwmon/npcm750-pwm-fan

+Kernel driver npcm750-pwm-fan
+=============================
+
+Supported chips:
+	NUVOTON NPCM750/730/715/705
+
+Authors:
+	<tomer.maimon@nuvoton.com>
+
+Description:
+------------
+This driver implements support for NUVOTON NPCM7XX PWM and Fan Tacho
+controller. The PWM controller supports up to 8 PWM outputs. The Fan tacho
+controller supports up to 16 tachometer inputs.
+
+The driver provides the following sensor accesses in sysfs:
+
+fanX_input	ro	provide current fan rotation value in RPM as reported
+			by the fan to the device.
+
+pwmX		rw	get or set PWM fan control value. This is an integer
+			value between 0(off) and 255(full speed).

drivers/hwmon/Kconfig

@@ -1268,6 +1268,16 @@ config SENSORS_NCT7904
 	  This driver can also be built as a module.  If so, the module
 	  will be called nct7904.
 
+config SENSORS_NPCM7XX
+	tristate "Nuvoton NPCM750 and compatible PWM and Fan controllers"
+	imply THERMAL
+	help
+	  This driver provides support for Nuvoton NPCM750/730/715/705 PWM
+          and Fan controllers.
+
+          This driver can also be built as a module. If so, the module
+          will be called npcm750-pwm-fan.
+
 config SENSORS_NSA320
 	tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
 	depends on GPIOLIB && OF

drivers/hwmon/Makefile

@@ -135,6 +135,7 @@ obj-$(CONFIG_SENSORS_NCT6683)	+= nct6683.o
 obj-$(CONFIG_SENSORS_NCT6775)	+= nct6775.o
 obj-$(CONFIG_SENSORS_NCT7802)	+= nct7802.o
 obj-$(CONFIG_SENSORS_NCT7904)	+= nct7904.o
+obj-$(CONFIG_SENSORS_NPCM7XX)	+= npcm750-pwm-fan.o
 obj-$(CONFIG_SENSORS_NSA320)	+= nsa320-hwmon.o
 obj-$(CONFIG_SENSORS_NTC_THERMISTOR)	+= ntc_thermistor.o
 obj-$(CONFIG_SENSORS_PC87360)	+= pc87360.o

drivers/hwmon/npcm750-pwm-fan.c

+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2014-2018 Nuvoton Technology corporation.
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/sysfs.h>
+#include <linux/thermal.h>
+
+/* NPCM7XX PWM registers */
+#define NPCM7XX_PWM_REG_BASE(base, n)    ((base) + ((n) * 0x1000L))
+
+#define NPCM7XX_PWM_REG_PR(base, n)	(NPCM7XX_PWM_REG_BASE(base, n) + 0x00)
+#define NPCM7XX_PWM_REG_CSR(base, n)	(NPCM7XX_PWM_REG_BASE(base, n) + 0x04)
+#define NPCM7XX_PWM_REG_CR(base, n)	(NPCM7XX_PWM_REG_BASE(base, n) + 0x08)
+#define NPCM7XX_PWM_REG_CNRx(base, n, ch) \
+			(NPCM7XX_PWM_REG_BASE(base, n) + 0x0C + (12 * (ch)))
+#define NPCM7XX_PWM_REG_CMRx(base, n, ch) \
+			(NPCM7XX_PWM_REG_BASE(base, n) + 0x10 + (12 * (ch)))
+#define NPCM7XX_PWM_REG_PDRx(base, n, ch) \
+			(NPCM7XX_PWM_REG_BASE(base, n) + 0x14 + (12 * (ch)))
+#define NPCM7XX_PWM_REG_PIER(base, n)	(NPCM7XX_PWM_REG_BASE(base, n) + 0x3C)
+#define NPCM7XX_PWM_REG_PIIR(base, n)	(NPCM7XX_PWM_REG_BASE(base, n) + 0x40)
+
+#define NPCM7XX_PWM_CTRL_CH0_MODE_BIT		BIT(3)
+#define NPCM7XX_PWM_CTRL_CH1_MODE_BIT		BIT(11)
+#define NPCM7XX_PWM_CTRL_CH2_MODE_BIT		BIT(15)
+#define NPCM7XX_PWM_CTRL_CH3_MODE_BIT		BIT(19)
+
+#define NPCM7XX_PWM_CTRL_CH0_INV_BIT		BIT(2)
+#define NPCM7XX_PWM_CTRL_CH1_INV_BIT		BIT(10)
+#define NPCM7XX_PWM_CTRL_CH2_INV_BIT		BIT(14)
+#define NPCM7XX_PWM_CTRL_CH3_INV_BIT		BIT(18)
+
+#define NPCM7XX_PWM_CTRL_CH0_EN_BIT		BIT(0)
+#define NPCM7XX_PWM_CTRL_CH1_EN_BIT		BIT(8)
+#define NPCM7XX_PWM_CTRL_CH2_EN_BIT		BIT(12)
+#define NPCM7XX_PWM_CTRL_CH3_EN_BIT		BIT(16)
+
+/* Define the maximum PWM channel number */
+#define NPCM7XX_PWM_MAX_CHN_NUM			8
+#define NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE	4
+#define NPCM7XX_PWM_MAX_MODULES                 2
+
+/* Define the Counter Register, value = 100 for match 100% */
+#define NPCM7XX_PWM_COUNTER_DEFAULT_NUM		255
+#define NPCM7XX_PWM_CMR_DEFAULT_NUM		127
+#define NPCM7XX_PWM_CMR_MAX			255
+
+/* default all PWM channels PRESCALE2 = 1 */
+#define NPCM7XX_PWM_PRESCALE2_DEFAULT_CH0	0x4
+#define NPCM7XX_PWM_PRESCALE2_DEFAULT_CH1	0x40
+#define NPCM7XX_PWM_PRESCALE2_DEFAULT_CH2	0x400
+#define NPCM7XX_PWM_PRESCALE2_DEFAULT_CH3	0x4000
+
+#define PWM_OUTPUT_FREQ_25KHZ			25000
+#define PWN_CNT_DEFAULT				256
+#define MIN_PRESCALE1				2
+#define NPCM7XX_PWM_PRESCALE_SHIFT_CH01		8
+
+#define NPCM7XX_PWM_PRESCALE2_DEFAULT	(NPCM7XX_PWM_PRESCALE2_DEFAULT_CH0 | \
+					NPCM7XX_PWM_PRESCALE2_DEFAULT_CH1 | \
+					NPCM7XX_PWM_PRESCALE2_DEFAULT_CH2 | \
+					NPCM7XX_PWM_PRESCALE2_DEFAULT_CH3)
+
+#define NPCM7XX_PWM_CTRL_MODE_DEFAULT	(NPCM7XX_PWM_CTRL_CH0_MODE_BIT | \
+					NPCM7XX_PWM_CTRL_CH1_MODE_BIT | \
+					NPCM7XX_PWM_CTRL_CH2_MODE_BIT | \
+					NPCM7XX_PWM_CTRL_CH3_MODE_BIT)
+
+/* NPCM7XX FAN Tacho registers */
+#define NPCM7XX_FAN_REG_BASE(base, n)	((base) + ((n) * 0x1000L))
+
+#define NPCM7XX_FAN_REG_TCNT1(base, n)    (NPCM7XX_FAN_REG_BASE(base, n) + 0x00)
+#define NPCM7XX_FAN_REG_TCRA(base, n)     (NPCM7XX_FAN_REG_BASE(base, n) + 0x02)
+#define NPCM7XX_FAN_REG_TCRB(base, n)     (NPCM7XX_FAN_REG_BASE(base, n) + 0x04)
+#define NPCM7XX_FAN_REG_TCNT2(base, n)    (NPCM7XX_FAN_REG_BASE(base, n) + 0x06)
+#define NPCM7XX_FAN_REG_TPRSC(base, n)    (NPCM7XX_FAN_REG_BASE(base, n) + 0x08)
+#define NPCM7XX_FAN_REG_TCKC(base, n)     (NPCM7XX_FAN_REG_BASE(base, n) + 0x0A)
+#define NPCM7XX_FAN_REG_TMCTRL(base, n)   (NPCM7XX_FAN_REG_BASE(base, n) + 0x0C)
+#define NPCM7XX_FAN_REG_TICTRL(base, n)   (NPCM7XX_FAN_REG_BASE(base, n) + 0x0E)
+#define NPCM7XX_FAN_REG_TICLR(base, n)    (NPCM7XX_FAN_REG_BASE(base, n) + 0x10)
+#define NPCM7XX_FAN_REG_TIEN(base, n)     (NPCM7XX_FAN_REG_BASE(base, n) + 0x12)
+#define NPCM7XX_FAN_REG_TCPA(base, n)     (NPCM7XX_FAN_REG_BASE(base, n) + 0x14)
+#define NPCM7XX_FAN_REG_TCPB(base, n)     (NPCM7XX_FAN_REG_BASE(base, n) + 0x16)
+#define NPCM7XX_FAN_REG_TCPCFG(base, n)   (NPCM7XX_FAN_REG_BASE(base, n) + 0x18)
+#define NPCM7XX_FAN_REG_TINASEL(base, n)  (NPCM7XX_FAN_REG_BASE(base, n) + 0x1A)
+#define NPCM7XX_FAN_REG_TINBSEL(base, n)  (NPCM7XX_FAN_REG_BASE(base, n) + 0x1C)
+
+#define NPCM7XX_FAN_TCKC_CLKX_NONE	0
+#define NPCM7XX_FAN_TCKC_CLK1_APB	BIT(0)
+#define NPCM7XX_FAN_TCKC_CLK2_APB	BIT(3)
+
+#define NPCM7XX_FAN_TMCTRL_TBEN		BIT(6)
+#define NPCM7XX_FAN_TMCTRL_TAEN		BIT(5)
+#define NPCM7XX_FAN_TMCTRL_TBEDG	BIT(4)
+#define NPCM7XX_FAN_TMCTRL_TAEDG	BIT(3)
+#define NPCM7XX_FAN_TMCTRL_MODE_5	BIT(2)
+
+#define NPCM7XX_FAN_TICLR_CLEAR_ALL	GENMASK(5, 0)
+#define NPCM7XX_FAN_TICLR_TFCLR		BIT(5)
+#define NPCM7XX_FAN_TICLR_TECLR		BIT(4)
+#define NPCM7XX_FAN_TICLR_TDCLR		BIT(3)
+#define NPCM7XX_FAN_TICLR_TCCLR		BIT(2)
+#define NPCM7XX_FAN_TICLR_TBCLR		BIT(1)
+#define NPCM7XX_FAN_TICLR_TACLR		BIT(0)
+
+#define NPCM7XX_FAN_TIEN_ENABLE_ALL	GENMASK(5, 0)
+#define NPCM7XX_FAN_TIEN_TFIEN		BIT(5)
+#define NPCM7XX_FAN_TIEN_TEIEN		BIT(4)
+#define NPCM7XX_FAN_TIEN_TDIEN		BIT(3)
+#define NPCM7XX_FAN_TIEN_TCIEN		BIT(2)
+#define NPCM7XX_FAN_TIEN_TBIEN		BIT(1)
+#define NPCM7XX_FAN_TIEN_TAIEN		BIT(0)
+
+#define NPCM7XX_FAN_TICTRL_TFPND	BIT(5)
+#define NPCM7XX_FAN_TICTRL_TEPND	BIT(4)
+#define NPCM7XX_FAN_TICTRL_TDPND	BIT(3)
+#define NPCM7XX_FAN_TICTRL_TCPND	BIT(2)
+#define NPCM7XX_FAN_TICTRL_TBPND	BIT(1)
+#define NPCM7XX_FAN_TICTRL_TAPND	BIT(0)
+
+#define NPCM7XX_FAN_TCPCFG_HIBEN	BIT(7)
+#define NPCM7XX_FAN_TCPCFG_EQBEN	BIT(6)
+#define NPCM7XX_FAN_TCPCFG_LOBEN	BIT(5)
+#define NPCM7XX_FAN_TCPCFG_CPBSEL	BIT(4)
+#define NPCM7XX_FAN_TCPCFG_HIAEN	BIT(3)
+#define NPCM7XX_FAN_TCPCFG_EQAEN	BIT(2)
+#define NPCM7XX_FAN_TCPCFG_LOAEN	BIT(1)
+#define NPCM7XX_FAN_TCPCFG_CPASEL	BIT(0)
+
+/* FAN General Definition */
+/* Define the maximum FAN channel number */
+#define NPCM7XX_FAN_MAX_MODULE			8
+#define NPCM7XX_FAN_MAX_CHN_NUM_IN_A_MODULE	2
+#define NPCM7XX_FAN_MAX_CHN_NUM			16
+
+/*
+ * Get Fan Tach Timeout (base on clock 214843.75Hz, 1 cnt = 4.654us)
+ * Timeout 94ms ~= 0x5000
+ * (The minimum FAN speed could to support ~640RPM/pulse 1,
+ * 320RPM/pulse 2, ...-- 10.6Hz)
+ */
+#define NPCM7XX_FAN_TIMEOUT	0x5000
+#define NPCM7XX_FAN_TCNT	0xFFFF
+#define NPCM7XX_FAN_TCPA	(NPCM7XX_FAN_TCNT - NPCM7XX_FAN_TIMEOUT)
+#define NPCM7XX_FAN_TCPB	(NPCM7XX_FAN_TCNT - NPCM7XX_FAN_TIMEOUT)
+
+#define NPCM7XX_FAN_POLL_TIMER_200MS			200
+#define NPCM7XX_FAN_DEFAULT_PULSE_PER_REVOLUTION	2
+#define NPCM7XX_FAN_TINASEL_FANIN_DEFAULT		0
+#define NPCM7XX_FAN_CLK_PRESCALE			255
+
+#define NPCM7XX_FAN_CMPA				0
+#define NPCM7XX_FAN_CMPB				1
+
+/* Obtain the fan number */
+#define NPCM7XX_FAN_INPUT(fan, cmp)		(((fan) << 1) + (cmp))
+
+/* fan sample status */
+#define FAN_DISABLE				0xFF
+#define FAN_INIT				0x00
+#define FAN_PREPARE_TO_GET_FIRST_CAPTURE	0x01
+#define FAN_ENOUGH_SAMPLE			0x02
+
+struct npcm7xx_fan_dev {
+	u8 fan_st_flg;
+	u8 fan_pls_per_rev;
+	u16 fan_cnt;
+	u32 fan_cnt_tmp;
+};
+
+struct npcm7xx_cooling_device {
+	char name[THERMAL_NAME_LENGTH];
+	struct npcm7xx_pwm_fan_data *data;
+	struct thermal_cooling_device *tcdev;
+	int pwm_port;
+	u8 *cooling_levels;
+	u8 max_state;
+	u8 cur_state;
+};
+
+struct npcm7xx_pwm_fan_data {
+	void __iomem *pwm_base;
+	void __iomem *fan_base;
+	unsigned long pwm_clk_freq;
+	unsigned long fan_clk_freq;
+	struct clk *pwm_clk;
+	struct clk *fan_clk;
+	struct mutex pwm_lock[NPCM7XX_PWM_MAX_MODULES];
+	spinlock_t fan_lock[NPCM7XX_FAN_MAX_MODULE];
+	int fan_irq[NPCM7XX_FAN_MAX_MODULE];
+	bool pwm_present[NPCM7XX_PWM_MAX_CHN_NUM];
+	bool fan_present[NPCM7XX_FAN_MAX_CHN_NUM];
+	u32 input_clk_freq;
+	struct timer_list fan_timer;
+	struct npcm7xx_fan_dev fan_dev[NPCM7XX_FAN_MAX_CHN_NUM];
+	struct npcm7xx_cooling_device *cdev[NPCM7XX_PWM_MAX_CHN_NUM];
+	u8 fan_select;
+};
+
+static int npcm7xx_pwm_config_set(struct npcm7xx_pwm_fan_data *data,
+				  int channel, u16 val)
+{
+	u32 pwm_ch = (channel % NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE);
+	u32 module = (channel / NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE);
+	u32 tmp_buf, ctrl_en_bit, env_bit;
+
+	/*
+	 * Config PWM Comparator register for setting duty cycle
+	 */
+	mutex_lock(&data->pwm_lock[module]);
+
+	/* write new CMR value  */
+	iowrite32(val, NPCM7XX_PWM_REG_CMRx(data->pwm_base, module, pwm_ch));
+	tmp_buf = ioread32(NPCM7XX_PWM_REG_CR(data->pwm_base, module));
+
+	switch (pwm_ch) {
+	case 0:
+		ctrl_en_bit = NPCM7XX_PWM_CTRL_CH0_EN_BIT;
+		env_bit = NPCM7XX_PWM_CTRL_CH0_INV_BIT;
+		break;
+	case 1:
+		ctrl_en_bit = NPCM7XX_PWM_CTRL_CH1_EN_BIT;
+		env_bit = NPCM7XX_PWM_CTRL_CH1_INV_BIT;
+		break;
+	case 2:
+		ctrl_en_bit = NPCM7XX_PWM_CTRL_CH2_EN_BIT;
+		env_bit = NPCM7XX_PWM_CTRL_CH2_INV_BIT;
+		break;
+	case 3:
+		ctrl_en_bit = NPCM7XX_PWM_CTRL_CH3_EN_BIT;
+		env_bit = NPCM7XX_PWM_CTRL_CH3_INV_BIT;
+		break;
+	default:
+		mutex_unlock(&data->pwm_lock[module]);
+		return -ENODEV;
+	}
+
+	if (val == 0) {
+		/* Disable PWM */
+		tmp_buf &= ~ctrl_en_bit;
+		tmp_buf |= env_bit;
+	} else {
+		/* Enable PWM */
+		tmp_buf |= ctrl_en_bit;
+		tmp_buf &= ~env_bit;
+	}
+
+	iowrite32(tmp_buf, NPCM7XX_PWM_REG_CR(data->pwm_base, module));
+	mutex_unlock(&data->pwm_lock[module]);
+
+	return 0;
+}
+
+static inline void npcm7xx_fan_start_capture(struct npcm7xx_pwm_fan_data *data,
+					     u8 fan, u8 cmp)
+{
+	u8 fan_id;
+	u8 reg_mode;
+	u8 reg_int;
+	unsigned long flags;
+
+	fan_id = NPCM7XX_FAN_INPUT(fan, cmp);
+
+	/* to check whether any fan tach is enable */
+	if (data->fan_dev[fan_id].fan_st_flg != FAN_DISABLE) {
+		/* reset status */
+		spin_lock_irqsave(&data->fan_lock[fan], flags);
+
+		data->fan_dev[fan_id].fan_st_flg = FAN_INIT;
+		reg_int = ioread8(NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
+
+		/*
+		 * the interrupt enable bits do not need to be cleared before
+		 * it sets, the interrupt enable bits are cleared only on reset.
+		 * the clock unit control register is behaving in the same
+		 * manner that the interrupt enable register behave.
+		 */
+		if (cmp == NPCM7XX_FAN_CMPA) {
+			/* enable interrupt */
+			iowrite8(reg_int | (NPCM7XX_FAN_TIEN_TAIEN |
+					    NPCM7XX_FAN_TIEN_TEIEN),
+				 NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
+
+			reg_mode = NPCM7XX_FAN_TCKC_CLK1_APB
+				| ioread8(NPCM7XX_FAN_REG_TCKC(data->fan_base,
+							       fan));
+
+			/* start to Capture */
+			iowrite8(reg_mode, NPCM7XX_FAN_REG_TCKC(data->fan_base,
+								fan));
+		} else {
+			/* enable interrupt */
+			iowrite8(reg_int | (NPCM7XX_FAN_TIEN_TBIEN |
+					    NPCM7XX_FAN_TIEN_TFIEN),
+				 NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
+
+			reg_mode =
+				NPCM7XX_FAN_TCKC_CLK2_APB
+				| ioread8(NPCM7XX_FAN_REG_TCKC(data->fan_base,
+							       fan));
+
+			/* start to Capture */
+			iowrite8(reg_mode,
+				 NPCM7XX_FAN_REG_TCKC(data->fan_base, fan));
+		}
+
+		spin_unlock_irqrestore(&data->fan_lock[fan], flags);
+	}
+}
+
+/*
+ * Enable a background timer to poll fan tach value, (200ms * 4)
+ * to polling all fan
+ */
+static void npcm7xx_fan_polling(struct timer_list *t)
+{
+	struct npcm7xx_pwm_fan_data *data;
+	int i;
+
+	data = from_timer(data, t, fan_timer);
+
+	/*
+	 * Polling two module per one round,
+	 * FAN01 & FAN89 / FAN23 & FAN1011 / FAN45 & FAN1213 / FAN67 & FAN1415
+	 */
+	for (i = data->fan_select; i < NPCM7XX_FAN_MAX_MODULE;
+	      i = i + 4) {
+		/* clear the flag and reset the counter (TCNT) */
+		iowrite8(NPCM7XX_FAN_TICLR_CLEAR_ALL,
+			 NPCM7XX_FAN_REG_TICLR(data->fan_base, i));
+
+		if (data->fan_present[i * 2]) {
+			iowrite16(NPCM7XX_FAN_TCNT,
+				  NPCM7XX_FAN_REG_TCNT1(data->fan_base, i));
+			npcm7xx_fan_start_capture(data, i, NPCM7XX_FAN_CMPA);
+		}
+		if (data->fan_present[(i * 2) + 1]) {
+			iowrite16(NPCM7XX_FAN_TCNT,
+				  NPCM7XX_FAN_REG_TCNT2(data->fan_base, i));
+			npcm7xx_fan_start_capture(data, i, NPCM7XX_FAN_CMPB);
+		}
+	}
+
+	data->fan_select++;
+	data->fan_select &= 0x3;
+
+	/* reset the timer interval */
+	data->fan_timer.expires = jiffies +
+		msecs_to_jiffies(NPCM7XX_FAN_POLL_TIMER_200MS);
+	add_timer(&data->fan_timer);
+}
+
+static inline void npcm7xx_fan_compute(struct npcm7xx_pwm_fan_data *data,
+				       u8 fan, u8 cmp, u8 fan_id, u8 flag_int,
+				       u8 flag_mode, u8 flag_clear)
+{
+	u8  reg_int;
+	u8  reg_mode;
+	u16 fan_cap;
+
+	if (cmp == NPCM7XX_FAN_CMPA)
+		fan_cap = ioread16(NPCM7XX_FAN_REG_TCRA(data->fan_base, fan));
+	else
+		fan_cap = ioread16(NPCM7XX_FAN_REG_TCRB(data->fan_base, fan));
+
+	/* clear capature flag, H/W will auto reset the NPCM7XX_FAN_TCNTx */
+	iowrite8(flag_clear, NPCM7XX_FAN_REG_TICLR(data->fan_base, fan));
+
+	if (data->fan_dev[fan_id].fan_st_flg == FAN_INIT) {
+		/* First capture, drop it */
+		data->fan_dev[fan_id].fan_st_flg =
+			FAN_PREPARE_TO_GET_FIRST_CAPTURE;
+
+		/* reset counter */
+		data->fan_dev[fan_id].fan_cnt_tmp = 0;
+	} else if (data->fan_dev[fan_id].fan_st_flg < FAN_ENOUGH_SAMPLE) {
+		/*
+		 * collect the enough sample,
+		 * (ex: 2 pulse fan need to get 2 sample)
+		 */
+		data->fan_dev[fan_id].fan_cnt_tmp +=
+			(NPCM7XX_FAN_TCNT - fan_cap);
+
+		data->fan_dev[fan_id].fan_st_flg++;
+	} else {
+		/* get enough sample or fan disable */
+		if (data->fan_dev[fan_id].fan_st_flg == FAN_ENOUGH_SAMPLE) {
+			data->fan_dev[fan_id].fan_cnt_tmp +=
+				(NPCM7XX_FAN_TCNT - fan_cap);
+
+			/* compute finial average cnt per pulse */
+			data->fan_dev[fan_id].fan_cnt =
+				data->fan_dev[fan_id].fan_cnt_tmp /
+				FAN_ENOUGH_SAMPLE;
+
+			data->fan_dev[fan_id].fan_st_flg = FAN_INIT;
+		}
+
+		reg_int =  ioread8(NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
+
+		/* disable interrupt */
+		iowrite8((reg_int & ~flag_int),
+			 NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
+		reg_mode =  ioread8(NPCM7XX_FAN_REG_TCKC(data->fan_base, fan));
+
+		/* stop capturing */
+		iowrite8((reg_mode & ~flag_mode),
+			 NPCM7XX_FAN_REG_TCKC(data->fan_base, fan));
+	}
+}
+
+static inline void npcm7xx_check_cmp(struct npcm7xx_pwm_fan_data *data,
+				     u8 fan, u8 cmp, u8 flag)
+{
+	u8 reg_int;
+	u8 reg_mode;
+	u8 flag_timeout;
+	u8 flag_cap;
+	u8 flag_clear;
+	u8 flag_int;
+	u8 flag_mode;
+	u8 fan_id;
+
+	fan_id = NPCM7XX_FAN_INPUT(fan, cmp);
+
+	if (cmp == NPCM7XX_FAN_CMPA) {
+		flag_cap = NPCM7XX_FAN_TICTRL_TAPND;
+		flag_timeout = NPCM7XX_FAN_TICTRL_TEPND;
+		flag_int = NPCM7XX_FAN_TIEN_TAIEN | NPCM7XX_FAN_TIEN_TEIEN;
+		flag_mode = NPCM7XX_FAN_TCKC_CLK1_APB;
+		flag_clear = NPCM7XX_FAN_TICLR_TACLR | NPCM7XX_FAN_TICLR_TECLR;
+	} else {
+		flag_cap = NPCM7XX_FAN_TICTRL_TBPND;
+		flag_timeout = NPCM7XX_FAN_TICTRL_TFPND;
+		flag_int = NPCM7XX_FAN_TIEN_TBIEN | NPCM7XX_FAN_TIEN_TFIEN;
+		flag_mode = NPCM7XX_FAN_TCKC_CLK2_APB;
+		flag_clear = NPCM7XX_FAN_TICLR_TBCLR | NPCM7XX_FAN_TICLR_TFCLR;
+	}
+
+	if (flag & flag_timeout) {
+		reg_int =  ioread8(NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
+
+		/* disable interrupt */
+		iowrite8((reg_int & ~flag_int),
+			 NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
+
+		/* clear interrupt flag */
+		iowrite8(flag_clear,
+			 NPCM7XX_FAN_REG_TICLR(data->fan_base, fan));
+
+		reg_mode =  ioread8(NPCM7XX_FAN_REG_TCKC(data->fan_base, fan));
+
+		/* stop capturing */
+		iowrite8((reg_mode & ~flag_mode),
+			 NPCM7XX_FAN_REG_TCKC(data->fan_base, fan));
+
+		/*
+		 *  If timeout occurs (NPCM7XX_FAN_TIMEOUT), the fan doesn't
+		 *  connect or speed is lower than 10.6Hz (320RPM/pulse2).
+		 *  In these situation, the RPM output should be zero.
+		 */
+		data->fan_dev[fan_id].fan_cnt = 0;
+	} else {
+	    /* input capture is occurred */
+		if (flag & flag_cap)
+			npcm7xx_fan_compute(data, fan, cmp, fan_id, flag_int,
+					    flag_mode, flag_clear);
+	}
+}
+
+static irqreturn_t npcm7xx_fan_isr(int irq, void *dev_id)
+{
+	struct npcm7xx_pwm_fan_data *data = dev_id;
+	unsigned long flags;
+	int module;
+	u8 flag;
+
+	module = irq - data->fan_irq[0];
+	spin_lock_irqsave(&data->fan_lock[module], flags);
+
+	flag = ioread8(NPCM7XX_FAN_REG_TICTRL(data->fan_base, module));
+	if (flag > 0) {
+		npcm7xx_check_cmp(data, module, NPCM7XX_FAN_CMPA, flag);
+		npcm7xx_check_cmp(data, module, NPCM7XX_FAN_CMPB, flag);
+		spin_unlock_irqrestore(&data->fan_lock[module], flags);
+		return IRQ_HANDLED;
+	}
+
+	spin_unlock_irqrestore(&data->fan_lock[module], flags);
+
+	return IRQ_NONE;
+}
+
+static int npcm7xx_read_pwm(struct device *dev, u32 attr, int channel,
+			    long *val)
+{
+	struct npcm7xx_pwm_fan_data *data = dev_get_drvdata(dev);
+	u32 pmw_ch = (channel % NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE);
+	u32 module = (channel / NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE);
+
+	switch (attr) {
+	case hwmon_pwm_input:
+		*val = ioread32
+			(NPCM7XX_PWM_REG_CMRx(data->pwm_base, module, pmw_ch));
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int npcm7xx_write_pwm(struct device *dev, u32 attr, int channel,
+			     long val)
+{
+	struct npcm7xx_pwm_fan_data *data = dev_get_drvdata(dev);
+	int err;
+
+	switch (attr) {
+	case hwmon_pwm_input:
+		if (val < 0 || val > NPCM7XX_PWM_CMR_MAX)
+			return -EINVAL;
+		err = npcm7xx_pwm_config_set(data, channel, (u16)val);
+		break;
+	default:
+		err = -EOPNOTSUPP;
+		break;
+	}
+
+	return err;
+}
+
+static umode_t npcm7xx_pwm_is_visible(const void *_data, u32 attr, int channel)
+{
+	const struct npcm7xx_pwm_fan_data *data = _data;
+
+	if (!data->pwm_present[channel])
+		return 0;
+
+	switch (attr) {
+	case hwmon_pwm_input:
+		return 0644;
+	default:
+		return 0;
+	}
+}
+
+static int npcm7xx_read_fan(struct device *dev, u32 attr, int channel,
+			    long *val)
+{
+	struct npcm7xx_pwm_fan_data *data = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_fan_input:
+		*val = 0;
+		if (data->fan_dev[channel].fan_cnt <= 0)
+			return data->fan_dev[channel].fan_cnt;
+
+		/* Convert the raw reading to RPM */
+		if (data->fan_dev[channel].fan_cnt > 0 &&
+		    data->fan_dev[channel].fan_pls_per_rev > 0)
+			*val = ((data->input_clk_freq * 60) /
+				(data->fan_dev[channel].fan_cnt *
+				 data->fan_dev[channel].fan_pls_per_rev));
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static umode_t npcm7xx_fan_is_visible(const void *_data, u32 attr, int channel)
+{
+	const struct npcm7xx_pwm_fan_data *data = _data;
+
+	if (!data->fan_present[channel])
+		return 0;
+
+	switch (attr) {
+	case hwmon_fan_input:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static int npcm7xx_read(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long *val)
+{
+	switch (type) {
+	case hwmon_pwm:
+		return npcm7xx_read_pwm(dev, attr, channel, val);
+	case hwmon_fan:
+		return npcm7xx_read_fan(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int npcm7xx_write(struct device *dev, enum hwmon_sensor_types type,
+			 u32 attr, int channel, long val)
+{
+	switch (type) {
+	case hwmon_pwm:
+		return npcm7xx_write_pwm(dev, attr, channel, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static umode_t npcm7xx_is_visible(const void *data,
+				  enum hwmon_sensor_types type,
+				  u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_pwm:
+		return npcm7xx_pwm_is_visible(data, attr, channel);
+	case hwmon_fan:
+		return npcm7xx_fan_is_visible(data, attr, channel);
+	default:
+		return 0;
+	}
+}
+
+static const u32 npcm7xx_pwm_config[] = {
+	HWMON_PWM_INPUT,
+	HWMON_PWM_INPUT,
+	HWMON_PWM_INPUT,
+	HWMON_PWM_INPUT,
+	HWMON_PWM_INPUT,
+	HWMON_PWM_INPUT,
+	HWMON_PWM_INPUT,
+	HWMON_PWM_INPUT,
+	0
+};
+
+static const struct hwmon_channel_info npcm7xx_pwm = {
+	.type = hwmon_pwm,
+	.config = npcm7xx_pwm_config,
+};
+
+static const u32 npcm7xx_fan_config[] = {
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	HWMON_F_INPUT,
+	0
+};
+
+static const struct hwmon_channel_info npcm7xx_fan = {
+	.type = hwmon_fan,
+	.config = npcm7xx_fan_config,
+};
+
+static const struct hwmon_channel_info *npcm7xx_info[] = {
+	&npcm7xx_pwm,
+	&npcm7xx_fan,
+	NULL
+};
+
+static const struct hwmon_ops npcm7xx_hwmon_ops = {
+	.is_visible = npcm7xx_is_visible,
+	.read = npcm7xx_read,
+	.write = npcm7xx_write,
+};
+
+static const struct hwmon_chip_info npcm7xx_chip_info = {
+	.ops = &npcm7xx_hwmon_ops,
+	.info = npcm7xx_info,
+};
+
+static u32 npcm7xx_pwm_init(struct npcm7xx_pwm_fan_data *data)
+{
+	int m, ch;
+	u32 prescale_val, output_freq;
+
+	data->pwm_clk_freq = clk_get_rate(data->pwm_clk);
+
+	/* Adjust NPCM7xx PWMs output frequency to ~25Khz */
+	output_freq = data->pwm_clk_freq / PWN_CNT_DEFAULT;
+	prescale_val = DIV_ROUND_CLOSEST(output_freq, PWM_OUTPUT_FREQ_25KHZ);
+
+	/* If prescale_val = 0, then the prescale output clock is stopped */
+	if (prescale_val < MIN_PRESCALE1)
+		prescale_val = MIN_PRESCALE1;
+	/*
+	 * prescale_val need to decrement in one because in the PWM Prescale
+	 * register the Prescale value increment by one
+	 */
+	prescale_val--;
+
+	/* Setting PWM Prescale Register value register to both modules */
+	prescale_val |= (prescale_val << NPCM7XX_PWM_PRESCALE_SHIFT_CH01);
+
+	for (m = 0; m < NPCM7XX_PWM_MAX_MODULES  ; m++) {
+		iowrite32(prescale_val, NPCM7XX_PWM_REG_PR(data->pwm_base, m));
+		iowrite32(NPCM7XX_PWM_PRESCALE2_DEFAULT,
+			  NPCM7XX_PWM_REG_CSR(data->pwm_base, m));
+		iowrite32(NPCM7XX_PWM_CTRL_MODE_DEFAULT,
+			  NPCM7XX_PWM_REG_CR(data->pwm_base, m));
+
+		for (ch = 0; ch < NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE; ch++) {
+			iowrite32(NPCM7XX_PWM_COUNTER_DEFAULT_NUM,
+				  NPCM7XX_PWM_REG_CNRx(data->pwm_base, m, ch));
+		}
+	}
+
+	return output_freq / ((prescale_val & 0xf) + 1);
+}
+
+static void npcm7xx_fan_init(struct npcm7xx_pwm_fan_data *data)
+{
+	int md;
+	int ch;
+	int i;
+	u32 apb_clk_freq;
+
+	for (md = 0; md < NPCM7XX_FAN_MAX_MODULE; md++) {
+		/* stop FAN0~7 clock */
+		iowrite8(NPCM7XX_FAN_TCKC_CLKX_NONE,
+			 NPCM7XX_FAN_REG_TCKC(data->fan_base, md));
+
+		/* disable all interrupt */
+		iowrite8(0x00, NPCM7XX_FAN_REG_TIEN(data->fan_base, md));
+
+		/* clear all interrupt */
+		iowrite8(NPCM7XX_FAN_TICLR_CLEAR_ALL,
+			 NPCM7XX_FAN_REG_TICLR(data->fan_base, md));
+
+		/* set FAN0~7 clock prescaler */
+		iowrite8(NPCM7XX_FAN_CLK_PRESCALE,
+			 NPCM7XX_FAN_REG_TPRSC(data->fan_base, md));
+
+		/* set FAN0~7 mode (high-to-low transition) */
+		iowrite8((NPCM7XX_FAN_TMCTRL_MODE_5 | NPCM7XX_FAN_TMCTRL_TBEN |
+			  NPCM7XX_FAN_TMCTRL_TAEN),
+			 NPCM7XX_FAN_REG_TMCTRL(data->fan_base, md));
+
+		/* set FAN0~7 Initial Count/Cap */
+		iowrite16(NPCM7XX_FAN_TCNT,
+			  NPCM7XX_FAN_REG_TCNT1(data->fan_base, md));
+		iowrite16(NPCM7XX_FAN_TCNT,
+			  NPCM7XX_FAN_REG_TCNT2(data->fan_base, md));
+
+		/* set FAN0~7 compare (equal to count) */
+		iowrite8((NPCM7XX_FAN_TCPCFG_EQAEN | NPCM7XX_FAN_TCPCFG_EQBEN),
+			 NPCM7XX_FAN_REG_TCPCFG(data->fan_base, md));
+
+		/* set FAN0~7 compare value */
+		iowrite16(NPCM7XX_FAN_TCPA,
+			  NPCM7XX_FAN_REG_TCPA(data->fan_base, md));
+		iowrite16(NPCM7XX_FAN_TCPB,
+			  NPCM7XX_FAN_REG_TCPB(data->fan_base, md));
+
+		/* set FAN0~7 fan input FANIN 0~15 */
+		iowrite8(NPCM7XX_FAN_TINASEL_FANIN_DEFAULT,
+			 NPCM7XX_FAN_REG_TINASEL(data->fan_base, md));
+		iowrite8(NPCM7XX_FAN_TINASEL_FANIN_DEFAULT,
+			 NPCM7XX_FAN_REG_TINBSEL(data->fan_base, md));
+
+		for (i = 0; i < NPCM7XX_FAN_MAX_CHN_NUM_IN_A_MODULE; i++) {
+			ch = md * NPCM7XX_FAN_MAX_CHN_NUM_IN_A_MODULE + i;
+			data->fan_dev[ch].fan_st_flg = FAN_DISABLE;
+			data->fan_dev[ch].fan_pls_per_rev =
+				NPCM7XX_FAN_DEFAULT_PULSE_PER_REVOLUTION;
+			data->fan_dev[ch].fan_cnt = 0;
+		}
+	}
+
+	apb_clk_freq = clk_get_rate(data->fan_clk);
+
+	/* Fan tach input clock = APB clock / prescalar, default is 255. */
+	data->input_clk_freq = apb_clk_freq / (NPCM7XX_FAN_CLK_PRESCALE + 1);
+}
+
+static int
+npcm7xx_pwm_cz_get_max_state(struct thermal_cooling_device *tcdev,
+			     unsigned long *state)
+{
+	struct npcm7xx_cooling_device *cdev = tcdev->devdata;
+
+	*state = cdev->max_state;
+
+	return 0;
+}
+
+static int
+npcm7xx_pwm_cz_get_cur_state(struct thermal_cooling_device *tcdev,
+			     unsigned long *state)
+{
+	struct npcm7xx_cooling_device *cdev = tcdev->devdata;
+
+	*state = cdev->cur_state;
+
+	return 0;
+}
+
+static int
+npcm7xx_pwm_cz_set_cur_state(struct thermal_cooling_device *tcdev,
+			     unsigned long state)
+{
+	struct npcm7xx_cooling_device *cdev = tcdev->devdata;
+	int ret;
+
+	if (state > cdev->max_state)
+		return -EINVAL;
+
+	cdev->cur_state = state;
+	ret = npcm7xx_pwm_config_set(cdev->data, cdev->pwm_port,
+				     cdev->cooling_levels[cdev->cur_state]);
+
+	return ret;
+}
+
+static const struct thermal_cooling_device_ops npcm7xx_pwm_cool_ops = {
+	.get_max_state = npcm7xx_pwm_cz_get_max_state,
+	.get_cur_state = npcm7xx_pwm_cz_get_cur_state,
+	.set_cur_state = npcm7xx_pwm_cz_set_cur_state,
+};
+
+static int npcm7xx_create_pwm_cooling(struct device *dev,
+				      struct device_node *child,
+				      struct npcm7xx_pwm_fan_data *data,
+				      u32 pwm_port, u8 num_levels)
+{
+	int ret;
+	struct npcm7xx_cooling_device *cdev;
+
+	cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL);
+	if (!cdev)
+		return -ENOMEM;
+
+	cdev->cooling_levels = devm_kzalloc(dev, num_levels, GFP_KERNEL);
+	if (!cdev->cooling_levels)
+		return -ENOMEM;
+
+	cdev->max_state = num_levels - 1;
+	ret = of_property_read_u8_array(child, "cooling-levels",
+					cdev->cooling_levels,
+					num_levels);
+	if (ret) {
+		dev_err(dev, "Property 'cooling-levels' cannot be read.\n");
+		return ret;
+	}
+	snprintf(cdev->name, THERMAL_NAME_LENGTH, "%s%d", child->name,
+		 pwm_port);
+
+	cdev->tcdev = thermal_of_cooling_device_register(child,
+							 cdev->name,
+							 cdev,
+							 &npcm7xx_pwm_cool_ops);
+	if (IS_ERR(cdev->tcdev))
+		return PTR_ERR(cdev->tcdev);
+
+	cdev->data = data;
+	cdev->pwm_port = pwm_port;
+
+	data->cdev[pwm_port] = cdev;
+
+	return 0;
+}
+
+static int npcm7xx_en_pwm_fan(struct device *dev,
+			      struct device_node *child,
+			      struct npcm7xx_pwm_fan_data *data)
+{
+	u8 *fan_ch;
+	u32 pwm_port;
+	int ret, fan_cnt;
+	u8 index, ch;
+
+	ret = of_property_read_u32(child, "reg", &pwm_port);
+	if (ret)
+		return ret;
+
+	data->pwm_present[pwm_port] = true;
+	ret = npcm7xx_pwm_config_set(data, pwm_port,
+				     NPCM7XX_PWM_CMR_DEFAULT_NUM);
+
+	ret = of_property_count_u8_elems(child, "cooling-levels");
+	if (ret > 0) {
+		ret = npcm7xx_create_pwm_cooling(dev, child, data, pwm_port,
+						 ret);
+		if (ret)
+			return ret;
+	}
+
+	fan_cnt = of_property_count_u8_elems(child, "fan-tach-ch");
+	if (fan_cnt < 1)
+		return -EINVAL;
+
+	fan_ch = devm_kzalloc(dev, sizeof(*fan_ch) * fan_cnt, GFP_KERNEL);
+	if (!fan_ch)
+		return -ENOMEM;
+
+	ret = of_property_read_u8_array(child, "fan-tach-ch", fan_ch, fan_cnt);
+	if (ret)
+		return ret;
+
+	for (ch = 0; ch < fan_cnt; ch++) {
+		index = fan_ch[ch];
+		data->fan_present[index] = true;
+		data->fan_dev[index].fan_st_flg = FAN_INIT;
+	}
+
+	return 0;
+}
+
+static int npcm7xx_pwm_fan_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np, *child;
+	struct npcm7xx_pwm_fan_data *data;
+	struct resource *res;
+	struct device *hwmon;
+	char name[20];
+	int ret, cnt;
+	u32 output_freq;
+	u32 i;
+
+	np = dev->of_node;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm");
+	if (!res) {
+		dev_err(dev, "pwm resource not found\n");
+		return -ENODEV;
+	}
+
+	data->pwm_base = devm_ioremap_resource(dev, res);
+	dev_dbg(dev, "pwm base resource is %pR\n", res);
+	if (IS_ERR(data->pwm_base))
+		return PTR_ERR(data->pwm_base);
+
+	data->pwm_clk = devm_clk_get(dev, "pwm");
+	if (IS_ERR(data->pwm_clk)) {
+		dev_err(dev, "couldn't get pwm clock\n");
+		return PTR_ERR(data->pwm_clk);
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fan");
+	if (!res) {
+		dev_err(dev, "fan resource not found\n");
+		return -ENODEV;
+	}
+
+	data->fan_base = devm_ioremap_resource(dev, res);
+	dev_dbg(dev, "fan base resource is %pR\n", res);
+	if (IS_ERR(data->fan_base))
+		return PTR_ERR(data->fan_base);
+
+	data->fan_clk = devm_clk_get(dev, "fan");
+	if (IS_ERR(data->fan_clk)) {
+		dev_err(dev, "couldn't get fan clock\n");
+		return PTR_ERR(data->fan_clk);
+	}
+
+	output_freq = npcm7xx_pwm_init(data);
+	npcm7xx_fan_init(data);
+
+	for (cnt = 0; cnt < NPCM7XX_PWM_MAX_MODULES  ; cnt++)
+		mutex_init(&data->pwm_lock[cnt]);
+
+	for (i = 0; i < NPCM7XX_FAN_MAX_MODULE; i++) {
+		spin_lock_init(&data->fan_lock[i]);
+
+		data->fan_irq[i] = platform_get_irq(pdev, i);
+		if (data->fan_irq[i] < 0) {
+			dev_err(dev, "get IRQ fan%d failed\n", i);
+			return data->fan_irq[i];
+		}
+
+		sprintf(name, "NPCM7XX-FAN-MD%d", i);
+		ret = devm_request_irq(dev, data->fan_irq[i], npcm7xx_fan_isr,
+				       0, name, (void *)data);
+		if (ret) {
+			dev_err(dev, "register IRQ fan%d failed\n", i);
+			return ret;
+		}
+	}
+
+	for_each_child_of_node(np, child) {
+		ret = npcm7xx_en_pwm_fan(dev, child, data);
+		if (ret) {
+			dev_err(dev, "enable pwm and fan failed\n");
+			of_node_put(child);
+			return ret;
+		}
+	}
+
+	hwmon = devm_hwmon_device_register_with_info(dev, "npcm7xx_pwm_fan",
+						     data, &npcm7xx_chip_info,
+						     NULL);
+	if (IS_ERR(hwmon)) {
+		dev_err(dev, "unable to register hwmon device\n");
+		return PTR_ERR(hwmon);
+	}
+
+	for (i = 0; i < NPCM7XX_FAN_MAX_CHN_NUM; i++) {
+		if (data->fan_present[i]) {
+			/* fan timer initialization */
+			data->fan_timer.expires = jiffies +
+				msecs_to_jiffies(NPCM7XX_FAN_POLL_TIMER_200MS);
+			timer_setup(&data->fan_timer,
+				    npcm7xx_fan_polling, 0);
+			add_timer(&data->fan_timer);
+			break;
+		}
+	}
+
+	pr_info("NPCM7XX PWM-FAN Driver probed, output Freq %dHz[PWM], input Freq %dHz[FAN]\n",
+		output_freq, data->input_clk_freq);
+
+	return 0;
+}
+
+static const struct of_device_id of_pwm_fan_match_table[] = {
+	{ .compatible = "nuvoton,npcm750-pwm-fan", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, of_pwm_fan_match_table);
+
+static struct platform_driver npcm7xx_pwm_fan_driver = {
+	.probe		= npcm7xx_pwm_fan_probe,
+	.driver		= {
+		.name	= "npcm7xx_pwm_fan",
+		.of_match_table = of_pwm_fan_match_table,
+	},
+};
+
+module_platform_driver(npcm7xx_pwm_fan_driver);
+
+MODULE_DESCRIPTION("Nuvoton NPCM7XX PWM and Fan Tacho driver");
+MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
+MODULE_LICENSE("GPL v2");