Skip to content

L
linux
Commit f2096f94 authored by Matt Carlson's avatar Matt Carlson Committed by David S. Miller
Browse files
Options

tg3: Add 5720 H2BMC support 

This patch adds support for the new Host to BMC feature.
Signed-off-by: default avatarMatt Carlson <mcarlson@broadcom.com>
Reviewed-by: default avatarMichael Chan <mchan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9b91b5f1
Show whitespace changes
Inline Side-by-side
Showing with 53 additions and 15 deletions
drivers/net/tg3.c
View file @ f2096f94
......@@ -4390,6 +4390,7 @@ static void tg3_serdes_parallel_detect(struct tg3 *tp)
static int tg3_setup_phy(struct tg3 *tp, int force_reset)
{
u32 val;
int err;
if (tp->phy_flags & TG3_PHYFLG_PHY_SERDES)
......@@ -4400,7 +4401,7 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset)
err = tg3_setup_copper_phy(tp, force_reset);
if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5784_AX) {
u32 val, scale;
u32 scale;
val = tr32(TG3_CPMU_CLCK_STAT) & CPMU_CLCK_STAT_MAC_CLCK_MASK;
if (val == CPMU_CLCK_STAT_MAC_CLCK_62_5)
......@@ -4415,17 +4416,20 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset)
tw32(GRC_MISC_CFG, val);
}
val = (2 << TX_LENGTHS_IPG_CRS_SHIFT) |
(6 << TX_LENGTHS_IPG_SHIFT);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
val |= tr32(MAC_TX_LENGTHS) &
(TX_LENGTHS_JMB_FRM_LEN_MSK |
TX_LENGTHS_CNT_DWN_VAL_MSK);
if (tp->link_config.active_speed == SPEED_1000 &&
tp->link_config.active_duplex == DUPLEX_HALF)
tw32(MAC_TX_LENGTHS,
((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
(6 << TX_LENGTHS_IPG_SHIFT) |
(0xff << TX_LENGTHS_SLOT_TIME_SHIFT)));
tw32(MAC_TX_LENGTHS, val |
(0xff << TX_LENGTHS_SLOT_TIME_SHIFT));
else
tw32(MAC_TX_LENGTHS,
((2 << TX_LENGTHS_IPG_CRS_SHIFT) |
(6 << TX_LENGTHS_IPG_SHIFT) |
(32 << TX_LENGTHS_SLOT_TIME_SHIFT)));
tw32(MAC_TX_LENGTHS, val |
(32 << TX_LENGTHS_SLOT_TIME_SHIFT));
if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
if (netif_carrier_ok(tp->dev)) {
......@@ -4437,7 +4441,7 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset)
}
if (tp->tg3_flags & TG3_FLAG_ASPM_WORKAROUND) {
u32 val = tr32(PCIE_PWR_MGMT_THRESH);
val = tr32(PCIE_PWR_MGMT_THRESH);
if (!netif_carrier_ok(tp->dev))
val = (val & ~PCIE_PWR_MGMT_L1_THRESH_MSK) |
tp->pwrmgmt_thresh;
......@@ -8164,10 +8168,16 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
/* The slot time is changed by tg3_setup_phy if we
* run at gigabit with half duplex.
*/
tw32(MAC_TX_LENGTHS,
(2 << TX_LENGTHS_IPG_CRS_SHIFT) |
val = (2 << TX_LENGTHS_IPG_CRS_SHIFT) |
(6 << TX_LENGTHS_IPG_SHIFT) |
(32 << TX_LENGTHS_SLOT_TIME_SHIFT));
(32 << TX_LENGTHS_SLOT_TIME_SHIFT);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
val |= tr32(MAC_TX_LENGTHS) &
(TX_LENGTHS_JMB_FRM_LEN_MSK |
TX_LENGTHS_CNT_DWN_VAL_MSK);
tw32(MAC_TX_LENGTHS, val);
/* Receive rules. */
tw32(MAC_RCV_RULE_CFG, RCV_RULE_CFG_DEFAULT_CLASS);
......@@ -8214,6 +8224,9 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
rdmac_mode |= RDMAC_MODE_IPV6_LSO_EN;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
rdmac_mode |= tr32(RDMAC_MODE) & RDMAC_MODE_H2BNC_VLAN_DET;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5761 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785 ||
......@@ -8447,9 +8460,17 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
}
tp->tx_mode = TX_MODE_ENABLE;
if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
tp->tx_mode |= TX_MODE_MBUF_LOCKUP_FIX;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720) {
val = TX_MODE_JMB_FRM_LEN | TX_MODE_CNT_DN_MODE;
tp->tx_mode &= ~val;
tp->tx_mode |= tr32(MAC_TX_MODE) & val;
}
tw32_f(MAC_TX_MODE, tp->tx_mode);
udelay(100);
......@@ -13880,7 +13901,15 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
/* Initialize data/descriptor byte/word swapping. */
val = tr32(GRC_MODE);
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5720)
val &= (GRC_MODE_BYTE_SWAP_B2HRX_DATA |
GRC_MODE_WORD_SWAP_B2HRX_DATA |
GRC_MODE_B2HRX_ENABLE |
GRC_MODE_HTX2B_ENABLE |
GRC_MODE_HOST_STACKUP);
else
val &= GRC_MODE_HOST_STACKUP;
tw32(GRC_MODE, val | tp->grc_mode);
tg3_switch_clocks(tp);
......
drivers/net/tg3.h
View file @ f2096f94
......@@ -479,6 +479,8 @@
#define TX_MODE_BIG_BCKOFF_ENABLE 0x00000020
#define TX_MODE_LONG_PAUSE_ENABLE 0x00000040
#define TX_MODE_MBUF_LOCKUP_FIX 0x00000100
#define TX_MODE_JMB_FRM_LEN 0x00400000
#define TX_MODE_CNT_DN_MODE 0x00800000
#define MAC_TX_STATUS 0x00000460
#define TX_STATUS_XOFFED 0x00000001
#define TX_STATUS_SENT_XOFF 0x00000002
......@@ -493,6 +495,8 @@
#define TX_LENGTHS_IPG_SHIFT 8
#define TX_LENGTHS_IPG_CRS_MASK 0x00003000
#define TX_LENGTHS_IPG_CRS_SHIFT 12
#define TX_LENGTHS_JMB_FRM_LEN_MSK 0x00ff0000
#define TX_LENGTHS_CNT_DWN_VAL_MSK 0xff000000
#define MAC_RX_MODE 0x00000468
#define RX_MODE_RESET 0x00000001
#define RX_MODE_ENABLE 0x00000002
......@@ -1330,6 +1334,7 @@
#define RDMAC_MODE_MULT_DMA_RD_DIS 0x01000000
#define RDMAC_MODE_IPV4_LSO_EN 0x08000000
#define RDMAC_MODE_IPV6_LSO_EN 0x10000000
#define RDMAC_MODE_H2BNC_VLAN_DET 0x20000000
#define RDMAC_STATUS 0x00004804
#define RDMAC_STATUS_TGTABORT 0x00000004
#define RDMAC_STATUS_MSTABORT 0x00000008
......@@ -1622,6 +1627,8 @@
#define GRC_MODE_WSWAP_NONFRM_DATA 0x00000004
#define GRC_MODE_BSWAP_DATA 0x00000010
#define GRC_MODE_WSWAP_DATA 0x00000020
#define GRC_MODE_BYTE_SWAP_B2HRX_DATA 0x00000040
#define GRC_MODE_WORD_SWAP_B2HRX_DATA 0x00000080
#define GRC_MODE_SPLITHDR 0x00000100
#define GRC_MODE_NOFRM_CRACKING 0x00000200
#define GRC_MODE_INCL_CRC 0x00000400
......@@ -1629,8 +1636,10 @@
#define GRC_MODE_NOIRQ_ON_SENDS 0x00002000
#define GRC_MODE_NOIRQ_ON_RCV 0x00004000
#define GRC_MODE_FORCE_PCI32BIT 0x00008000
#define GRC_MODE_B2HRX_ENABLE 0x00008000
#define GRC_MODE_HOST_STACKUP 0x00010000
#define GRC_MODE_HOST_SENDBDS 0x00020000
#define GRC_MODE_HTX2B_ENABLE 0x00040000
#define GRC_MODE_NO_TX_PHDR_CSUM 0x00100000
#define GRC_MODE_NVRAM_WR_ENABLE 0x00200000
#define GRC_MODE_PCIE_TL_SEL 0x00000000
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7