ath9k: Remove ATH9K_BEACON_PERIOD mask

Earlier beacon_interval is used to hold interval value and
some flags (ATH9K_BEACON_ENA &ATH9K_BEACON_PERIOD). So to
extract interval ATH9K_BEACON_PERIOD is used. Those flags
were completely removed. So masking beacon_interval is
not required.
Signed-off-by: Rajkumar Manoharan <rmanoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/beacon.c

@@ -496,7 +496,7 @@ static void ath_beacon_config_ap(struct ath_softc *sc,
 	u32 nexttbtt, intval;
 
 	/* NB: the beacon interval is kept internally in TU's */
-	intval = TU_TO_USEC(conf->beacon_interval & ATH9K_BEACON_PERIOD);
+	intval = TU_TO_USEC(conf->beacon_interval);
 	intval /= ATH_BCBUF;    /* for staggered beacons */
 	nexttbtt = intval;
 
@@ -543,7 +543,7 @@ static void ath_beacon_config_sta(struct ath_softc *sc,
 	}
 
 	memset(&bs, 0, sizeof(bs));
-	intval = conf->beacon_interval & ATH9K_BEACON_PERIOD;
+	intval = conf->beacon_interval;
 
 	/*
 	 * Setup dtim and cfp parameters according to
@@ -657,7 +657,7 @@ static void ath_beacon_config_adhoc(struct ath_softc *sc,
 	ath9k_reset_beacon_status(sc);
 
 	tsf = ath9k_hw_gettsf32(ah) + TU_TO_USEC(FUDGE);
-	intval = TU_TO_USEC(conf->beacon_interval & ATH9K_BEACON_PERIOD);
+	intval = TU_TO_USEC(conf->beacon_interval);
 
 	if (!sc->beacon.bc_tstamp)
 		nexttbtt = tsf + intval;

drivers/net/wireless/ath/ath9k/htc_drv_beacon.c

@@ -79,7 +79,7 @@ static void ath9k_htc_beacon_config_sta(struct ath9k_htc_priv *priv,
 
 	memset(&bs, 0, sizeof(bs));
 
-	intval = bss_conf->beacon_interval & ATH9K_BEACON_PERIOD;
+	intval = bss_conf->beacon_interval;
 	bmiss_timeout = (ATH_DEFAULT_BMISS_LIMIT * bss_conf->beacon_interval);
 
 	/*
@@ -194,7 +194,7 @@ static void ath9k_htc_beacon_config_ap(struct ath9k_htc_priv *priv,
 	u8 cmd_rsp;
 	u64 tsf;
 
-	intval = bss_conf->beacon_interval & ATH9K_BEACON_PERIOD;
+	intval = bss_conf->beacon_interval;
 	intval /= ATH9K_HTC_MAX_BCN_VIF;
 	nexttbtt = intval;
 
@@ -250,7 +250,7 @@ static void ath9k_htc_beacon_config_adhoc(struct ath9k_htc_priv *priv,
 	u8 cmd_rsp;
 	u64 tsf;
 
-	intval = bss_conf->beacon_interval & ATH9K_BEACON_PERIOD;
+	intval = bss_conf->beacon_interval;
 	nexttbtt = intval;
 
 	/*
@@ -427,7 +427,7 @@ static int ath9k_htc_choose_bslot(struct ath9k_htc_priv *priv,
 	u16 intval;
 	int slot;
 
-	intval = priv->cur_beacon_conf.beacon_interval & ATH9K_BEACON_PERIOD;
+	intval = priv->cur_beacon_conf.beacon_interval;
 
 	tsf = be64_to_cpu(swba->tsf);
 	tsftu = TSF_TO_TU(tsf >> 32, tsf);

drivers/net/wireless/ath/ath9k/hw.c

@@ -1785,16 +1785,16 @@ void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
 	REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(bs->bs_nexttbtt));
 
 	REG_WRITE(ah, AR_BEACON_PERIOD,
-		  TU_TO_USEC(bs->bs_intval & ATH9K_BEACON_PERIOD));
+		  TU_TO_USEC(bs->bs_intval));
 	REG_WRITE(ah, AR_DMA_BEACON_PERIOD,
-		  TU_TO_USEC(bs->bs_intval & ATH9K_BEACON_PERIOD));
+		  TU_TO_USEC(bs->bs_intval));
 
 	REGWRITE_BUFFER_FLUSH(ah);
 
 	REG_RMW_FIELD(ah, AR_RSSI_THR,
 		      AR_RSSI_THR_BM_THR, bs->bs_bmissthreshold);
 
-	beaconintval = bs->bs_intval & ATH9K_BEACON_PERIOD;
+	beaconintval = bs->bs_intval;
 
 	if (bs->bs_sleepduration > beaconintval)
 		beaconintval = bs->bs_sleepduration;

drivers/net/wireless/ath/ath9k/hw.h

@@ -403,7 +403,6 @@ struct ath9k_beacon_state {
 	u32 bs_nexttbtt;
 	u32 bs_nextdtim;
 	u32 bs_intval;
-#define ATH9K_BEACON_PERIOD       0x0000ffff
 #define ATH9K_TSFOOR_THRESHOLD    0x00004240 /* 16k us */
 	u32 bs_dtimperiod;
 	u16 bs_cfpperiod;