Commit f2be6295 authored by Andreas Schwab's avatar Andreas Schwab Committed by Michael Ellerman

macintosh/adb: Properly mark continued kernel messages

Use pr_cont where appropriate, and switch to pr_foo throughout.
Additionally, lower messages in adb_probe_task to debug level.
Signed-off-by: default avatarAndreas Schwab <schwab@linux-m68k.org>
[mpe: Clean up whitespace slightly]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
parent e67e02a5
......@@ -203,18 +203,17 @@ static int adb_scan_bus(void)
}
/* Now fill in the handler_id field of the adb_handler entries. */
printk(KERN_DEBUG "adb devices:");
pr_debug("adb devices:\n");
for (i = 1; i < 16; i++) {
if (adb_handler[i].original_address == 0)
continue;
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
(i << 4) | 0xf);
adb_handler[i].handler_id = req.reply[2];
printk(" [%d]: %d %x", i, adb_handler[i].original_address,
pr_debug(" [%d]: %d %x\n", i, adb_handler[i].original_address,
adb_handler[i].handler_id);
devmask |= 1 << i;
}
printk("\n");
return devmask;
}
......@@ -225,9 +224,9 @@ static int adb_scan_bus(void)
static int
adb_probe_task(void *x)
{
printk(KERN_INFO "adb: starting probe task...\n");
pr_debug("adb: starting probe task...\n");
do_adb_reset_bus();
printk(KERN_INFO "adb: finished probe task...\n");
pr_debug("adb: finished probe task...\n");
up(&adb_probe_mutex);
......@@ -337,7 +336,7 @@ static int __init adb_init(void)
adb_controller->init())
adb_controller = NULL;
if (adb_controller == NULL) {
printk(KERN_WARNING "Warning: no ADB interface detected\n");
pr_warn("Warning: no ADB interface detected\n");
} else {
#ifdef CONFIG_PPC
if (of_machine_is_compatible("AAPL,PowerBook1998") ||
......@@ -480,8 +479,7 @@ adb_register(int default_id, int handler_id, struct adb_ids *ids,
(!handler_id || (handler_id == adb_handler[i].handler_id) ||
try_handler_change(i, handler_id))) {
if (adb_handler[i].handler != 0) {
printk(KERN_ERR
"Two handlers for ADB device %d\n",
pr_err("Two handlers for ADB device %d\n",
default_id);
continue;
}
......@@ -535,10 +533,10 @@ adb_input(unsigned char *buf, int nb, int autopoll)
id = buf[0] >> 4;
if (dump_adb_input) {
printk(KERN_INFO "adb packet: ");
pr_info("adb packet: ");
for (i = 0; i < nb; ++i)
printk(" %x", buf[i]);
printk(", id = %d\n", id);
pr_cont(" %x", buf[i]);
pr_cont(", id = %d\n", id);
}
write_lock_irqsave(&adb_handler_lock, flags);
handler = adb_handler[id].handler;
......@@ -884,7 +882,7 @@ static void __init
adbdev_init(void)
{
if (register_chrdev(ADB_MAJOR, "adb", &adb_fops)) {
printk(KERN_ERR "adb: unable to get major %d\n", ADB_MAJOR);
pr_err("adb: unable to get major %d\n", ADB_MAJOR);
return;
}
......
......@@ -268,7 +268,7 @@ adbhid_keyboard_input(unsigned char *data, int nb, int apoll)
int id = (data[0] >> 4) & 0x0f;
if (!adbhid[id]) {
printk(KERN_ERR "ADB HID on ID %d not yet registered, packet %#02x, %#02x, %#02x, %#02x\n",
pr_err("ADB HID on ID %d not yet registered, packet %#02x, %#02x, %#02x, %#02x\n",
id, data[0], data[1], data[2], data[3]);
return;
}
......@@ -320,8 +320,7 @@ adbhid_input_keycode(int id, int scancode, int repeat)
ahid->flags &= ~FLAG_CAPSLOCK_TRANSLATE;
}
} else {
printk(KERN_INFO "Spurious caps lock event "
"(scancode 0xff).\n");
pr_info("Spurious caps lock event (scancode 0xff).\n");
}
}
}
......@@ -397,7 +396,7 @@ adbhid_input_keycode(int id, int scancode, int repeat)
input_report_key(adbhid[id]->input, key, !up_flag);
input_sync(adbhid[id]->input);
} else
printk(KERN_INFO "Unhandled ADB key (scancode %#02x) %s.\n", keycode,
pr_info("Unhandled ADB key (scancode %#02x) %s.\n", keycode,
up_flag ? "released" : "pressed");
}
......@@ -408,7 +407,7 @@ adbhid_mouse_input(unsigned char *data, int nb, int autopoll)
int id = (data[0] >> 4) & 0x0f;
if (!adbhid[id]) {
printk(KERN_ERR "ADB HID on ID %d not yet registered\n", id);
pr_err("ADB HID on ID %d not yet registered\n", id);
return;
}
......@@ -506,7 +505,7 @@ adbhid_buttons_input(unsigned char *data, int nb, int autopoll)
int id = (data[0] >> 4) & 0x0f;
if (!adbhid[id]) {
printk(KERN_ERR "ADB HID on ID %d not yet registered\n", id);
pr_err("ADB HID on ID %d not yet registered\n", id);
return;
}
......@@ -534,7 +533,7 @@ adbhid_buttons_input(unsigned char *data, int nb, int autopoll)
break;
default:
printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
pr_info("Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
data[0], data[1], data[2], data[3]);
break;
}
......@@ -609,13 +608,13 @@ adbhid_buttons_input(unsigned char *data, int nb, int autopoll)
break;
default:
printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
pr_info("Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
data[0], data[1], data[2], data[3]);
break;
}
break;
default:
printk(KERN_INFO "Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
pr_info("Unhandled ADB_MISC event %02x, %02x, %02x, %02x\n",
data[0], data[1], data[2], data[3]);
break;
}
......@@ -760,7 +759,7 @@ adbhid_input_register(int id, int default_id, int original_handler_id,
int i;
if (adbhid[id]) {
printk(KERN_ERR "Trying to reregister ADB HID on ID %d\n", id);
pr_err("Trying to reregister ADB HID on ID %d\n", id);
return -EEXIST;
}
......@@ -799,24 +798,24 @@ adbhid_input_register(int id, int default_id, int original_handler_id,
memcpy(hid->keycode, adb_to_linux_keycodes, sizeof(adb_to_linux_keycodes));
printk(KERN_INFO "Detected ADB keyboard, type ");
pr_info("Detected ADB keyboard, type ");
switch (original_handler_id) {
default:
printk("<unknown>.\n");
pr_cont("<unknown>.\n");
input_dev->id.version = ADB_KEYBOARD_UNKNOWN;
break;
case 0x01: case 0x02: case 0x03: case 0x06: case 0x08:
case 0x0C: case 0x10: case 0x18: case 0x1B: case 0x1C:
case 0xC0: case 0xC3: case 0xC6:
printk("ANSI.\n");
pr_cont("ANSI.\n");
input_dev->id.version = ADB_KEYBOARD_ANSI;
break;
case 0x04: case 0x05: case 0x07: case 0x09: case 0x0D:
case 0x11: case 0x14: case 0x19: case 0x1D: case 0xC1:
case 0xC4: case 0xC7:
printk("ISO, swapping keys.\n");
pr_cont("ISO, swapping keys.\n");
input_dev->id.version = ADB_KEYBOARD_ISO;
i = hid->keycode[10];
hid->keycode[10] = hid->keycode[50];
......@@ -825,7 +824,7 @@ adbhid_input_register(int id, int default_id, int original_handler_id,
case 0x12: case 0x15: case 0x16: case 0x17: case 0x1A:
case 0x1E: case 0xC2: case 0xC5: case 0xC8: case 0xC9:
printk("JIS.\n");
pr_cont("JIS.\n");
input_dev->id.version = ADB_KEYBOARD_JIS;
break;
}
......@@ -884,7 +883,7 @@ adbhid_input_register(int id, int default_id, int original_handler_id,
/* else fall through */
default:
printk(KERN_INFO "Trying to register unknown ADB device to input layer.\n");
pr_info("Trying to register unknown ADB device to input layer.\n");
err = -ENODEV;
goto fail;
}
......@@ -1073,12 +1072,12 @@ adbhid_probe(void)
(req.reply[1] == 0x4b) && (req.reply[2] == 0x4f) &&
(req.reply[3] == 0x49) && (req.reply[4] == 0x54)) {
if (adb_try_handler_change(id, 0x42)) {
printk("\nADB MacAlly 2-button mouse at %d, handler set to 0x42", id);
pr_cont("\nADB MacAlly 2-button mouse at %d, handler set to 0x42", id);
mouse_kind = ADBMOUSE_MACALLY2;
}
}
}
printk("\n");
pr_cont("\n");
adb_get_infos(id, &default_id, &cur_handler_id);
reg |= adbhid_input_reregister(id, default_id, org_handler_id,
......@@ -1093,12 +1092,12 @@ init_trackpad(int id)
struct adb_request req;
unsigned char r1_buffer[8];
printk(" (trackpad)");
pr_cont(" (trackpad)");
adb_request(&req, NULL, ADBREQ_SYNC | ADBREQ_REPLY, 1,
ADB_READREG(id,1));
if (req.reply_len < 8)
printk("bad length for reg. 1\n");
pr_cont("bad length for reg. 1\n");
else
{
memcpy(r1_buffer, &req.reply[1], 8);
......@@ -1146,7 +1145,7 @@ init_trackball(int id)
{
struct adb_request req;
printk(" (trackman/mouseman)");
pr_cont(" (trackman/mouseman)");
adb_request(&req, NULL, ADBREQ_SYNC, 3,
ADB_WRITEREG(id,1), 00,0x81);
......@@ -1178,7 +1177,7 @@ init_turbomouse(int id)
{
struct adb_request req;
printk(" (TurboMouse 5)");
pr_cont(" (TurboMouse 5)");
adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
......@@ -1214,7 +1213,7 @@ init_microspeed(int id)
{
struct adb_request req;
printk(" (Microspeed/MacPoint or compatible)");
pr_cont(" (Microspeed/MacPoint or compatible)");
adb_request(&req, NULL, ADBREQ_SYNC, 1, ADB_FLUSH(id));
......@@ -1254,7 +1253,7 @@ init_ms_a3(int id)
{
struct adb_request req;
printk(" (Mouse Systems A3 Mouse, or compatible)");
pr_cont(" (Mouse Systems A3 Mouse, or compatible)");
adb_request(&req, NULL, ADBREQ_SYNC, 3,
ADB_WRITEREG(id, 0x2),
0x00,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment