Commit f30281f4 authored by Daniel Glockner's avatar Daniel Glockner Committed by Linus Torvalds

rtc: add m41t62 support to rtc-m41t80 driver

Compared to the other supported chips, the m41t62 uses a different
register to set the square wave frequency.
Signed-off-by: default avatarDaniel Glockner <dg@emlix.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 96615841
......@@ -225,11 +225,11 @@ config RTC_DRV_PCF8583
will be called rtc-pcf8583.
config RTC_DRV_M41T80
tristate "ST M41T65/M41T80/81/82/83/84/85/87"
tristate "ST M41T62/65/M41T80/81/82/83/84/85/87"
help
If you say Y here you will get support for the ST M41T60
and M41T80 RTC chips series. Currently, the following chips are
supported: M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
supported: M41T62, M41T65, M41T80, M41T81, M41T82, M41T83, M41ST84,
M41ST85, and M41ST87.
This driver can also be built as a module. If so, the module
......
......@@ -64,10 +64,12 @@
#define M41T80_FEATURE_BL (1 << 1) /* Battery low indicator */
#define M41T80_FEATURE_SQ (1 << 2) /* Squarewave feature */
#define M41T80_FEATURE_WD (1 << 3) /* Extra watchdog resolution */
#define M41T80_FEATURE_SQ_ALT (1 << 4) /* RSx bits are in reg 4 */
#define DRV_VERSION "0.05"
static const struct i2c_device_id m41t80_id[] = {
{ "m41t62", M41T80_FEATURE_SQ | M41T80_FEATURE_SQ_ALT },
{ "m41t65", M41T80_FEATURE_HT | M41T80_FEATURE_WD },
{ "m41t80", M41T80_FEATURE_SQ },
{ "m41t81", M41T80_FEATURE_HT | M41T80_FEATURE_SQ},
......@@ -393,12 +395,15 @@ static ssize_t m41t80_sysfs_show_sqwfreq(struct device *dev,
{
struct i2c_client *client = to_i2c_client(dev);
struct m41t80_data *clientdata = i2c_get_clientdata(client);
int val;
int val, reg_sqw;
if (!(clientdata->features & M41T80_FEATURE_SQ))
return -EINVAL;
val = i2c_smbus_read_byte_data(client, M41T80_REG_SQW);
reg_sqw = M41T80_REG_SQW;
if (clientdata->features & M41T80_FEATURE_SQ_ALT)
reg_sqw = M41T80_REG_WDAY;
val = i2c_smbus_read_byte_data(client, reg_sqw);
if (val < 0)
return -EIO;
val = (val >> 4) & 0xf;
......@@ -419,7 +424,7 @@ static ssize_t m41t80_sysfs_set_sqwfreq(struct device *dev,
{
struct i2c_client *client = to_i2c_client(dev);
struct m41t80_data *clientdata = i2c_get_clientdata(client);
int almon, sqw;
int almon, sqw, reg_sqw;
int val = simple_strtoul(buf, NULL, 0);
if (!(clientdata->features & M41T80_FEATURE_SQ))
......@@ -440,13 +445,16 @@ static ssize_t m41t80_sysfs_set_sqwfreq(struct device *dev,
almon = i2c_smbus_read_byte_data(client, M41T80_REG_ALARM_MON);
if (almon < 0)
return -EIO;
sqw = i2c_smbus_read_byte_data(client, M41T80_REG_SQW);
reg_sqw = M41T80_REG_SQW;
if (clientdata->features & M41T80_FEATURE_SQ_ALT)
reg_sqw = M41T80_REG_WDAY;
sqw = i2c_smbus_read_byte_data(client, reg_sqw);
if (sqw < 0)
return -EIO;
sqw = (sqw & 0x0f) | (val << 4);
if (i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
almon & ~M41T80_ALMON_SQWE) < 0 ||
i2c_smbus_write_byte_data(client, M41T80_REG_SQW, sqw) < 0)
i2c_smbus_write_byte_data(client, reg_sqw, sqw) < 0)
return -EIO;
if (val && i2c_smbus_write_byte_data(client, M41T80_REG_ALARM_MON,
almon | M41T80_ALMON_SQWE) < 0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment