Merge remote-tracking branches 'regulator/topic/bd718xx' and...

Merge remote-tracking branches 'regulator/topic/bd718xx' and 'regulator/topic/pfuze100' into regulator-next

Documentation/devicetree/bindings/regulator/pfuze100.txt

@@ -12,6 +12,11 @@ Optional properties:
   disabled. This binding is a workaround to keep backward compatibility with
   old dtb's which rely on the fact that the switched regulators are always on
   and don't mark them explicit as "regulator-always-on".
+- fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all
+  power rails when PMIC_STBY_REQ line is asserted during the power off sequence.
+  Use this option if the SoC should be powered off by external power
+  management IC (PMIC) on PMIC_STBY_REQ signal.
+  As opposite to PMIC_STBY_REQ boards can implement PMIC_ON_REQ signal.
 
 Required child node:
 - regulators: This is the list of child nodes that specify the regulator

drivers/mfd/rohm-bd718x7.c

@@ -98,7 +98,7 @@ static int bd718xx_i2c_probe(struct i2c_client *i2c,
 		return -ENOMEM;
 
 	bd718xx->chip_irq = i2c->irq;
-	bd718xx->chip_type = (unsigned int)
+	bd718xx->chip_type = (unsigned int)(uintptr_t)
 				of_device_get_match_data(&i2c->dev);
 	bd718xx->dev = &i2c->dev;
 	dev_set_drvdata(&i2c->dev, bd718xx);

drivers/regulator/pfuze100-regulator.c

@@ -31,11 +31,17 @@
 
 #define PFUZE100_COINVOL	0x1a
 #define PFUZE100_SW1ABVOL	0x20
+#define PFUZE100_SW1ABMODE	0x23
 #define PFUZE100_SW1CVOL	0x2e
+#define PFUZE100_SW1CMODE	0x31
 #define PFUZE100_SW2VOL		0x35
+#define PFUZE100_SW2MODE	0x38
 #define PFUZE100_SW3AVOL	0x3c
+#define PFUZE100_SW3AMODE	0x3f
 #define PFUZE100_SW3BVOL	0x43
+#define PFUZE100_SW3BMODE	0x46
 #define PFUZE100_SW4VOL		0x4a
+#define PFUZE100_SW4MODE	0x4d
 #define PFUZE100_SWBSTCON1	0x66
 #define PFUZE100_VREFDDRCON	0x6a
 #define PFUZE100_VSNVSVOL	0x6b
@@ -46,6 +52,13 @@
 #define PFUZE100_VGEN5VOL	0x70
 #define PFUZE100_VGEN6VOL	0x71
 
+#define PFUZE100_SWxMODE_MASK	0xf
+#define PFUZE100_SWxMODE_APS_APS	0x8
+#define PFUZE100_SWxMODE_APS_OFF	0x4
+
+#define PFUZE100_VGENxLPWR	BIT(6)
+#define PFUZE100_VGENxSTBY	BIT(5)
+
 enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3, PFUZE3001 = 0x31, };
 
 struct pfuze_regulator {
@@ -559,6 +572,69 @@ static inline struct device_node *match_of_node(int index)
 }
 #endif
 
+static struct pfuze_chip *syspm_pfuze_chip;
+
+static void pfuze_power_off_prepare(void)
+{
+	dev_info(syspm_pfuze_chip->dev, "Configure standby mode for power off");
+
+	/* Switch from default mode: APS/APS to APS/Off */
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1ABMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1CMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW2MODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3AMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3BMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW4MODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN1VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN2VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN3VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN4VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN5VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN6VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+}
+
+static int pfuze_power_off_prepare_init(struct pfuze_chip *pfuze_chip)
+{
+	if (pfuze_chip->chip_id != PFUZE100) {
+		dev_warn(pfuze_chip->dev, "Requested pm_power_off_prepare handler for not supported chip\n");
+		return -ENODEV;
+	}
+
+	if (pm_power_off_prepare) {
+		dev_warn(pfuze_chip->dev, "pm_power_off_prepare is already registered.\n");
+		return -EBUSY;
+	}
+
+	if (syspm_pfuze_chip) {
+		dev_warn(pfuze_chip->dev, "syspm_pfuze_chip is already set.\n");
+		return -EBUSY;
+	}
+
+	syspm_pfuze_chip = pfuze_chip;
+	pm_power_off_prepare = pfuze_power_off_prepare;
+
+	return 0;
+}
+
 static int pfuze_identify(struct pfuze_chip *pfuze_chip)
 {
 	unsigned int value;
@@ -753,6 +829,20 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		}
 	}
 
+	if (of_property_read_bool(client->dev.of_node,
+				  "fsl,pmic-stby-poweroff"))
+		return pfuze_power_off_prepare_init(pfuze_chip);
+
+	return 0;
+}
+
+static int pfuze100_regulator_remove(struct i2c_client *client)
+{
+	if (syspm_pfuze_chip) {
+		syspm_pfuze_chip = NULL;
+		pm_power_off_prepare = NULL;
+	}
+
 	return 0;
 }
 
@@ -763,6 +853,7 @@ static struct i2c_driver pfuze_driver = {
 		.of_match_table = pfuze_dt_ids,
 	},
 	.probe = pfuze100_regulator_probe,
+	.remove = pfuze100_regulator_remove,
 };
 module_i2c_driver(pfuze_driver);
 

kernel/reboot.c

@@ -49,6 +49,7 @@ int reboot_force;
  */
 
 void (*pm_power_off_prepare)(void);
+EXPORT_SYMBOL_GPL(pm_power_off_prepare);
 
 /**
  *	emergency_restart - reboot the system