Commit f360d88a authored by Eli Cohen's avatar Eli Cohen Committed by Roland Dreier

IB/mlx5: Add block multicast loopback support

Add support for the block multicast loopback QP creation flag along
the proper firmware API for that.
Signed-off-by: default avatarEli Cohen <eli@mellanox.com>
Signed-off-by: default avatarOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: default avatarRoland Dreier <roland@purestorage.com>
parent 877f075a
......@@ -282,6 +282,8 @@ static int mlx5_ib_query_device(struct ib_device *ibdev,
props->sig_guard_cap = IB_GUARD_T10DIF_CRC |
IB_GUARD_T10DIF_CSUM;
}
if (flags & MLX5_DEV_CAP_FLAG_BLOCK_MCAST)
props->device_cap_flags |= IB_DEVICE_BLOCK_MULTICAST_LOOPBACK;
props->vendor_id = be32_to_cpup((__be32 *)(out_mad->data + 36)) &
0xffffff;
......
......@@ -807,6 +807,15 @@ static int create_qp_common(struct mlx5_ib_dev *dev, struct ib_pd *pd,
spin_lock_init(&qp->sq.lock);
spin_lock_init(&qp->rq.lock);
if (init_attr->create_flags & IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK) {
if (!(dev->mdev.caps.flags & MLX5_DEV_CAP_FLAG_BLOCK_MCAST)) {
mlx5_ib_dbg(dev, "block multicast loopback isn't supported\n");
return -EINVAL;
} else {
qp->flags |= MLX5_IB_QP_BLOCK_MULTICAST_LOOPBACK;
}
}
if (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR)
qp->sq_signal_bits = MLX5_WQE_CTRL_CQ_UPDATE;
......@@ -878,6 +887,9 @@ static int create_qp_common(struct mlx5_ib_dev *dev, struct ib_pd *pd,
if (qp->wq_sig)
in->ctx.flags_pd |= cpu_to_be32(MLX5_QP_ENABLE_SIG);
if (qp->flags & MLX5_IB_QP_BLOCK_MULTICAST_LOOPBACK)
in->ctx.flags_pd |= cpu_to_be32(MLX5_QP_BLOCK_MCAST);
if (qp->scat_cqe && is_connected(init_attr->qp_type)) {
int rcqe_sz;
int scqe_sz;
......
......@@ -179,6 +179,7 @@ enum {
MLX5_DEV_CAP_FLAG_BAD_QKEY_CNTR = 1LL << 9,
MLX5_DEV_CAP_FLAG_APM = 1LL << 17,
MLX5_DEV_CAP_FLAG_ATOMIC = 1LL << 18,
MLX5_DEV_CAP_FLAG_BLOCK_MCAST = 1LL << 23,
MLX5_DEV_CAP_FLAG_ON_DMND_PG = 1LL << 24,
MLX5_DEV_CAP_FLAG_CQ_MODER = 1LL << 29,
MLX5_DEV_CAP_FLAG_RESIZE_CQ = 1LL << 30,
......
......@@ -146,6 +146,7 @@ enum {
enum {
MLX5_QP_LAT_SENSITIVE = 1 << 28,
MLX5_QP_BLOCK_MCAST = 1 << 30,
MLX5_QP_ENABLE_SIG = 1 << 31,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment