Commit f36bb0ca authored by Gabor Juhos's avatar Gabor Juhos Committed by John W. Linville

rt2x00: rt2800lib: fix LNA_A[12] gain values for RT3593

The LNA_A[12] gain values are stored at a different
offset in the EEPROM on RT3593 based devices. However
the current code unconditionally reads those values
from the location used by other chipsets.

Fix the code to use the correct EEPROM offset.

Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.

References:
  RT3593_EEPROM_RSSI2_OFFSET_ALNAGAIN1_24G_READ in include/chip/rt3593.h
  RT3593_EEPROM_RSSI2_OFFSET_ALNAGAIN2_5G_READ in include/chip/rt3593.h
Signed-off-by: default avatarGabor Juhos <juhosg@openwrt.org>
Acked-by: default avatarStanislaw Gruszka <stf_xl@wp.pl>
Acked-by: default avatarGertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 6316c786
......@@ -2672,6 +2672,10 @@ enum rt2800_eeprom_word {
#define EEPROM_BBP_VALUE FIELD16(0x00ff)
#define EEPROM_BBP_REG_ID FIELD16(0xff00)
/* EEPROM_EXT_LNA2 */
#define EEPROM_EXT_LNA2_A1 FIELD16(0x00ff)
#define EEPROM_EXT_LNA2_A2 FIELD16(0xff00)
/*
* EEPROM IQ Calibration, unlike other entries those are byte addresses.
*/
......
......@@ -1826,11 +1826,25 @@ static void rt2800_config_lna_gain(struct rt2x00_dev *rt2x00dev,
rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
} else if (libconf->rf.channel <= 128) {
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
if (rt2x00_rt(rt2x00dev, RT3593)) {
rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom);
lna_gain = rt2x00_get_field16(eeprom,
EEPROM_EXT_LNA2_A1);
} else {
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
lna_gain = rt2x00_get_field16(eeprom,
EEPROM_RSSI_BG2_LNA_A1);
}
} else {
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
if (rt2x00_rt(rt2x00dev, RT3593)) {
rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom);
lna_gain = rt2x00_get_field16(eeprom,
EEPROM_EXT_LNA2_A2);
} else {
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
lna_gain = rt2x00_get_field16(eeprom,
EEPROM_RSSI_A2_LNA_A2);
}
}
rt2x00dev->lna_gain = lna_gain;
......@@ -6488,10 +6502,12 @@ static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
default_lna_gain);
if (!rt2x00_rt(rt2x00dev, RT3593)) {
if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
default_lna_gain);
}
rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
drv_data->txmixer_gain_5g = rt2800_get_txmixer_gain_5g(rt2x00dev);
......@@ -6506,12 +6522,27 @@ static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
default_lna_gain);
if (!rt2x00_rt(rt2x00dev, RT3593)) {
if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
default_lna_gain);
}
rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
if (rt2x00_rt(rt2x00dev, RT3593)) {
rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &word);
if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 ||
rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff)
rt2x00_set_field16(&word, EEPROM_EXT_LNA2_A1,
default_lna_gain);
if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A2) == 0x00 ||
rt2x00_get_field16(word, EEPROM_EXT_LNA2_A2) == 0xff)
rt2x00_set_field16(&word, EEPROM_EXT_LNA2_A1,
default_lna_gain);
rt2800_eeprom_write(rt2x00dev, EEPROM_EXT_LNA2, word);
}
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment