mfd: qcom_rpm: Parametrize also ack selector size

The RPM has two sets of selectors (IPC bit fields): request and
acknowledge. Apparently, some models use 4*32 bit words for select
and some use 7*32 bit words for request, but all use 7*32 words
for acknowledge bits.

So apparently you can on the models with requests of 4*32 select
bits send 4*32 messages and get 7*32 different replies, so on ACK
interrupt, 7*32 bit words need to be read. This is how the vendor
code apparently works.

Cc: stable@vger.kernel.org
Reported-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/qcom_rpm.c

@@ -39,7 +39,8 @@ struct qcom_rpm_data {
 	unsigned int req_sel_off;
 	unsigned int ack_ctx_off;
 	unsigned int ack_sel_off;
-	unsigned int sel_size;
+	unsigned int req_sel_size;
+	unsigned int ack_sel_size;
 };
 
 struct qcom_rpm {
@@ -160,7 +161,8 @@ static const struct qcom_rpm_data apq8064_template = {
 	.req_sel_off = 11,
 	.ack_ctx_off = 15,
 	.ack_sel_off = 23,
-	.sel_size = 4,
+	.req_sel_size = 4,
+	.ack_sel_size = 7,
 };
 
 static const struct qcom_rpm_resource msm8660_rpm_resource_table[] = {
@@ -248,7 +250,8 @@ static const struct qcom_rpm_data msm8660_template = {
 	.req_sel_off = 11,
 	.ack_ctx_off = 19,
 	.ack_sel_off = 27,
-	.sel_size = 7,
+	.req_sel_size = 7,
+	.ack_sel_size = 7,
 };
 
 static const struct qcom_rpm_resource msm8960_rpm_resource_table[] = {
@@ -335,7 +338,8 @@ static const struct qcom_rpm_data msm8960_template = {
 	.req_sel_off = 11,
 	.ack_ctx_off = 15,
 	.ack_sel_off = 23,
-	.sel_size = 4,
+	.req_sel_size = 4,
+	.ack_sel_size = 7,
 };
 
 static const struct qcom_rpm_resource ipq806x_rpm_resource_table[] = {
@@ -380,7 +384,8 @@ static const struct qcom_rpm_data ipq806x_template = {
 	.req_sel_off = 11,
 	.ack_ctx_off = 15,
 	.ack_sel_off = 23,
-	.sel_size = 4,
+	.req_sel_size = 4,
+	.ack_sel_size = 7,
 };
 
 static const struct of_device_id qcom_rpm_of_match[] = {
@@ -417,7 +422,7 @@ int qcom_rpm_write(struct qcom_rpm *rpm,
 		writel_relaxed(buf[i], RPM_REQ_REG(rpm, res->target_id + i));
 
 	bitmap_set((unsigned long *)sel_mask, res->select_id, 1);
-	for (i = 0; i < rpm->data->sel_size; i++) {
+	for (i = 0; i < rpm->data->req_sel_size; i++) {
 		writel_relaxed(sel_mask[i],
 			       RPM_CTRL_REG(rpm, rpm->data->req_sel_off + i));
 	}
@@ -446,7 +451,7 @@ static irqreturn_t qcom_rpm_ack_interrupt(int irq, void *dev)
 	int i;
 
 	ack = readl_relaxed(RPM_CTRL_REG(rpm, rpm->data->ack_ctx_off));
-	for (i = 0; i < rpm->data->sel_size; i++)
+	for (i = 0; i < rpm->data->ack_sel_size; i++)
 		writel_relaxed(0,
 			RPM_CTRL_REG(rpm, rpm->data->ack_sel_off + i));
 	writel(0, RPM_CTRL_REG(rpm, rpm->data->ack_ctx_off));