Skip to content

L
linux
Commit f39fac3e authored by Antti Palosaari's avatar Antti Palosaari Committed by Mauro Carvalho Chehab
Browse files
Options

[media] rtl28xxu: reimplement rtl2832u remote controller 

Thanks to Rodrigo for original implementation!
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 1e41413f
Show whitespace changes
Inline Side-by-side
Showing with 58 additions and 103 deletions
drivers/media/usb/dvb-usb-v2/rtl28xxu.c
View file @ f39fac3e
......@@ -1114,17 +1114,6 @@ static int rtl2832u_power_ctrl(struct dvb_usb_device *d, int onoff)
if (ret)
goto err;
} else {
/* demod_ctl_1 */
ret = rtl28xx_rd_reg(d, SYS_DEMOD_CTL1, &val);
if (ret)
goto err;
val |= 0x0c;
ret = rtl28xx_wr_reg(d, SYS_DEMOD_CTL1, val);
if (ret)
goto err;
/* set output values */
ret = rtl28xx_rd_reg(d, SYS_GPIO_OUT_VAL, &val);
if (ret)
......@@ -1249,72 +1238,44 @@ static int rtl2831u_get_rc_config(struct dvb_usb_device *d,
#if IS_ENABLED(CONFIG_RC_CORE)
static int rtl2832u_rc_query(struct dvb_usb_device *d)
{
#define TICSAT38KHZTONS(x) ((x) * (1000000000/38000))
int ret, i;
int ret, i, len;
struct rtl28xxu_priv *priv = d->priv;
struct ir_raw_event ev;
u8 buf[128];
int len;
struct ir_raw_event ev; //encode single ir event (pulse or space)
struct rtl28xxu_xreg_val rc_sys_init_tab[] = {
{ SYS_DEMOD_CTL1, OP_AND, 0xfb },
{ SYS_DEMOD_CTL1, OP_AND, 0xf7 },
{ USB_CTRL, OP_OR , 0x20 },
{ SYS_SYS1, OP_AND, 0xf7 },
{ SYS_GPIO_OUT_EN, OP_OR , 0x08 },
{ SYS_GPIO_OUT_VAL, OP_OR , 0x08 },
}; // system hard init
struct rtl28xxu_reg_val rc_init_tab[] = {
{ IR_RX_CTRL, 0x20 },
{ IR_RX_BUF_CTRL, 0x80 },
{ IR_RX_IF, 0xff },
{ IR_RX_IE, 0xff },
{ IR_MAX_DURATION0, 0xd0 },
{ IR_MAX_DURATION1, 0x07 },
{ IR_IDLE_LEN0, 0xc0 },
{ IR_IDLE_LEN1, 0x00 },
{ IR_GLITCH_LEN, 0x03 },
{ IR_RX_CLK, 0x09 },
{ IR_RX_CFG, 0x1c },
{ IR_MAX_H_TOL_LEN, 0x1e },
{ IR_MAX_L_TOL_LEN, 0x1e },
{ IR_RX_CTRL, 0x80 },
}; // hard init
struct rtl28xxu_reg_val rc_reinit_tab[] = {
{ IR_RX_CTRL, 0x20 },
{ IR_RX_BUF_CTRL, 0x80 },
{ IR_RX_IF, 0xff },
{ IR_RX_IE, 0xff },
{ IR_RX_CTRL, 0x80 },
}; // reinit IR
struct rtl28xxu_reg_val rc_clear_tab[] = {
{ IR_RX_IF, 0x03 },
{ IR_RX_BUF_CTRL, 0x80 },
{ IR_RX_CTRL, 0x80 },
}; // clear reception
static const struct rtl28xxu_reg_val_mask refresh_tab[] = {
{IR_RX_IF, 0x03, 0xff},
{IR_RX_BUF_CTRL, 0x80, 0xff},
{IR_RX_CTRL, 0x80, 0xff},
};
/* init remote controller */
if (!priv->rc_active) {
for (i = 0; i < ARRAY_SIZE(rc_sys_init_tab); i++) {
ret = rtl28xx_rd_reg(d, rc_sys_init_tab[i].reg, &buf[0]);
if (ret)
goto err;
if (rc_sys_init_tab[i].op == OP_AND) {
buf[0] &= rc_sys_init_tab[i].mask;
}
else {//OP_OR
buf[0] |= rc_sys_init_tab[i].mask;
}
ret = rtl28xx_wr_reg(d, rc_sys_init_tab[i].reg,
buf[0]);
if (ret)
goto err;
}
for (i = 0; i < ARRAY_SIZE(rc_init_tab); i++) {
ret = rtl28xx_wr_reg(d, rc_init_tab[i].reg,
rc_init_tab[i].val);
static const struct rtl28xxu_reg_val_mask init_tab[] = {
{SYS_DEMOD_CTL1, 0x00, 0x04},
{SYS_DEMOD_CTL1, 0x00, 0x08},
{USB_CTRL, 0x20, 0x20},
{SYS_GPIO_DIR, 0x00, 0x08},
{SYS_GPIO_OUT_EN, 0x08, 0x08},
{SYS_GPIO_OUT_VAL, 0x08, 0x08},
{IR_MAX_DURATION0, 0xd0, 0xff},
{IR_MAX_DURATION1, 0x07, 0xff},
{IR_IDLE_LEN0, 0xc0, 0xff},
{IR_IDLE_LEN1, 0x00, 0xff},
{IR_GLITCH_LEN, 0x03, 0xff},
{IR_RX_CLK, 0x09, 0xff},
{IR_RX_CFG, 0x1c, 0xff},
{IR_MAX_H_TOL_LEN, 0x1e, 0xff},
{IR_MAX_L_TOL_LEN, 0x1e, 0xff},
{IR_RX_CTRL, 0x80, 0xff},
};
for (i = 0; i < ARRAY_SIZE(init_tab); i++) {
ret = rtl28xx_wr_reg_mask(d, init_tab[i].reg,
init_tab[i].val, init_tab[i].mask);
if (ret)
goto err;
}
priv->rc_active = true;
}
......@@ -1323,57 +1284,56 @@ static int rtl2832u_rc_query(struct dvb_usb_device *d)
goto err;
if (buf[0] != 0x83)
goto err;
goto exit;
ret = rtl28xx_rd_reg(d, IR_RX_BC, &buf[0]);
if (ret)
goto err;
len = buf[0];
ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len);
/* pass raw IR to Kernel IR decoder */
init_ir_raw_event(&ev);
ir_raw_event_reset(d->rc_dev);
ev.pulse=1;
for(i=0; true; ++i) { // conver count to time
if (i >= len || !(buf[i] & 0x80) != !(ev.pulse)) {//end or transition pulse/space: flush
ir_raw_event_store(d->rc_dev, &ev);
ev.duration = 0;
}
if (i >= len)
break;
ev.pulse = buf[i] >> 7;
ev.duration += TICSAT38KHZTONS(((u32)(buf[i] & 0x7F)) << 1);
}
ir_raw_event_handle(d->rc_dev);
/* read raw code from hw */
ret = rtl2831_rd_regs(d, IR_RX_BUF, buf, len);
if (ret)
goto err;
for (i = 0; i < ARRAY_SIZE(rc_clear_tab); i++) {
ret = rtl28xx_wr_reg(d, rc_clear_tab[i].reg,
rc_clear_tab[i].val);
/* let hw receive new code */
for (i = 0; i < ARRAY_SIZE(refresh_tab); i++) {
ret = rtl28xx_wr_reg_mask(d, refresh_tab[i].reg,
refresh_tab[i].val, refresh_tab[i].mask);
if (ret)
goto err;
}
/* pass data to Kernel IR decoder */
init_ir_raw_event(&ev);
for (i = 0; i < len; i++) {
ev.pulse = buf[i] >> 7;
ev.duration = 50800 * (buf[i] & 0x7f);
ir_raw_event_store_with_filter(d->rc_dev, &ev);
}
/* 'flush' ir_raw_event_store_with_filter() */
ir_raw_event_set_idle(d->rc_dev, true);
ir_raw_event_handle(d->rc_dev);
exit:
return ret;
err:
for (i = 0; i < ARRAY_SIZE(rc_reinit_tab); i++) {
ret = rtl28xx_wr_reg(d, rc_reinit_tab[i].reg,
rc_reinit_tab[i].val);
}
dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret);
return ret;
#undef TICSAT38KHZTONS
}
static int rtl2832u_get_rc_config(struct dvb_usb_device *d,
struct dvb_usb_rc *rc)
{
/* load empty to enable rc */
if (!rc->map_name)
rc->map_name = RC_MAP_EMPTY;
rc->allowed_protos = RC_BIT_ALL;
rc->driver_type = RC_DRIVER_IR_RAW;
rc->query = rtl2832u_rc_query;
rc->interval = 400;
rc->driver_type = RC_DRIVER_IR_RAW;
return 0;
}
......
drivers/media/usb/dvb-usb-v2/rtl28xxu.h
View file @ f39fac3e
......@@ -97,14 +97,9 @@ struct rtl28xxu_reg_val {
u8 val;
};
enum OP{
OP_AND =0,
OP_OR
};
struct rtl28xxu_xreg_val {
struct rtl28xxu_reg_val_mask {
u16 reg;
u8 op;
u8 val;
u8 mask;
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7