iio:staging:accelerometers move towards the new abi

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/iio/accel/accel.h

@@ -2,7 +2,6 @@
 #include "../sysfs.h"
 
 /* Accelerometer types of attribute */
-
 #define IIO_DEV_ATTR_ACCEL_X_OFFSET(_mode, _show, _store, _addr)	\
 	IIO_DEVICE_ATTR(accel_x_offset, _mode, _show, _store, _addr)
 
@@ -22,13 +21,13 @@
 	IIO_DEVICE_ATTR(accel_z_gain, _mode, _show, _store, _addr)
 
 #define IIO_DEV_ATTR_ACCEL_X(_show, _addr)			\
-	IIO_DEVICE_ATTR(accel_x, S_IRUGO, _show, NULL, _addr)
+	IIO_DEVICE_ATTR(accel_x_raw, S_IRUGO, _show, NULL, _addr)
 
 #define IIO_DEV_ATTR_ACCEL_Y(_show, _addr)			\
-	IIO_DEVICE_ATTR(accel_y, S_IRUGO, _show, NULL, _addr)
+	IIO_DEVICE_ATTR(accel_y_raw, S_IRUGO, _show, NULL, _addr)
 
 #define IIO_DEV_ATTR_ACCEL_Z(_show, _addr)			\
-	IIO_DEVICE_ATTR(accel_z, S_IRUGO, _show, NULL, _addr)
+	IIO_DEVICE_ATTR(accel_z_raw, S_IRUGO, _show, NULL, _addr)
 
 /* Thresholds are somewhat chip dependent - may need quite a few defs here */
 /* For unified thresholds (shared across all directions */
@@ -61,7 +60,6 @@
 #define IIO_DEV_ATTR_ACCEL_THRESH_Z(_mode, _show, _store, _addr)	\
 	IIO_DEVICE_ATTR(thresh_accel_z, _mode, _show, _store, _addr)
 
-
 /**
  * IIO_EVENT_ATTR_ACCEL_X_HIGH: threshold event, x acceleration
  * @_show: read x acceleration high threshold

drivers/staging/iio/accel/kxsd9.c

@@ -26,6 +26,7 @@
 #include <linux/rtc.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
+#include <linux/string.h>
 
 #include "../iio.h"
 #include "../sysfs.h"
@@ -51,8 +52,10 @@
 #define KXSD9_READ(a) (0x80 | (a))
 #define KXSD9_WRITE(a) (a)
 
-#define IIO_DEV_ATTR_ACCEL_SET_RANGE(_mode, _show, _store)	\
-	IIO_DEVICE_ATTR(accel_range, _mode, _show, _store, 0)
+#define KXSD9_SCALE_2G "0.011978"
+#define KXSD9_SCALE_4G "0.023927"
+#define KXSD9_SCALE_6G "0.035934"
+#define KXSD9_SCALE_8G "0.047853"
 
 #define KXSD9_STATE_RX_SIZE 2
 #define KXSD9_STATE_TX_SIZE 4
@@ -73,9 +76,9 @@ struct kxsd9_state {
 };
 
 /* This may want to move to mili g to allow for non integer ranges */
-static ssize_t kxsd9_read_accel_range(struct device *dev,
-				      struct device_attribute *attr,
-				      char *buf)
+static ssize_t kxsd9_read_scale(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
 {
 	int ret;
 	ssize_t len = 0;
@@ -101,16 +104,16 @@ static ssize_t kxsd9_read_accel_range(struct device *dev,
 
 	switch (st->rx[1] & KXSD9_FS_MASK) {
 	case KXSD9_FS_8:
-		len += sprintf(buf, "8\n");
+		len += sprintf(buf, "%s\n", KXSD9_SCALE_8G);
 		break;
 	case KXSD9_FS_6:
-		len += sprintf(buf, "6\n");
+		len += sprintf(buf, "%s\n", KXSD9_SCALE_6G);
 		break;
 	case KXSD9_FS_4:
-		len += sprintf(buf, "4\n");
+		len += sprintf(buf, "%s\n", KXSD9_SCALE_4G);
 		break;
 	case KXSD9_FS_2:
-		len += sprintf(buf, "2\n");
+		len += sprintf(buf, "%s\n", KXSD9_SCALE_2G);
 		break;
 	}
 
@@ -119,12 +122,12 @@ static ssize_t kxsd9_read_accel_range(struct device *dev,
 
 	return ret ? ret : len;
 }
-static ssize_t kxsd9_write_accel_range(struct device *dev,
-				      struct device_attribute *attr,
-				      const char *buf,
-				      size_t len)
+static ssize_t kxsd9_write_scale(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf,
+				 size_t len)
 {
-	long readin;
+
 	struct spi_message msg;
 	int ret;
 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
@@ -145,25 +148,25 @@ static ssize_t kxsd9_write_accel_range(struct device *dev,
 		},
 	};
 
-	ret = strict_strtol(buf, 10, &readin);
-	if (ret)
-		return ret;
-	switch (readin) {
-	case 8:
+	if (!strncmp(buf, KXSD9_SCALE_8G,
+		     strlen(buf) < strlen(KXSD9_SCALE_8G)
+		     ? strlen(buf) : strlen(KXSD9_SCALE_8G)))
 		val = KXSD9_FS_8;
-		break;
-	case 6:
+	else if (!strncmp(buf, KXSD9_SCALE_6G,
+			  strlen(buf) < strlen(KXSD9_SCALE_6G)
+			  ? strlen(buf) : strlen(KXSD9_SCALE_6G)))
 		val = KXSD9_FS_6;
-		break;
-	case 4:
+	else if (!strncmp(buf, KXSD9_SCALE_4G,
+			  strlen(buf) < strlen(KXSD9_SCALE_4G)
+			  ? strlen(buf) : strlen(KXSD9_SCALE_4G)))
 		val = KXSD9_FS_4;
-		break;
-	case 2:
+	else if (!strncmp(buf, KXSD9_SCALE_2G,
+			  strlen(buf) < strlen(KXSD9_SCALE_2G)
+			  ? strlen(buf) : strlen(KXSD9_SCALE_2G)))
 		val = KXSD9_FS_2;
-		break;
-	default:
+	else
 		return -EINVAL;
-	}
+
 	mutex_lock(&st->buf_lock);
 	st->tx[0] = KXSD9_READ(KXSD9_REG_CTRL_C);
 	st->tx[1] = 0;
@@ -182,6 +185,7 @@ static ssize_t kxsd9_write_accel_range(struct device *dev,
 	mutex_unlock(&st->buf_lock);
 	return ret ? ret : len;
 }
+
 static ssize_t kxsd9_read_accel(struct device *dev,
 				struct device_attribute *attr,
 				char *buf)
@@ -227,17 +231,27 @@ static ssize_t kxsd9_read_accel(struct device *dev,
 static IIO_DEV_ATTR_ACCEL_X(kxsd9_read_accel, KXSD9_REG_X);
 static IIO_DEV_ATTR_ACCEL_Y(kxsd9_read_accel, KXSD9_REG_Y);
 static IIO_DEV_ATTR_ACCEL_Z(kxsd9_read_accel, KXSD9_REG_Z);
-static IIO_DEV_ATTR_ADC(0, kxsd9_read_accel, KXSD9_REG_AUX);
-static IIO_DEV_ATTR_ACCEL_SET_RANGE(S_IRUGO | S_IWUSR,
-				    kxsd9_read_accel_range,
-				    kxsd9_write_accel_range);
+static IIO_DEV_ATTR_IN_RAW(0, kxsd9_read_accel, KXSD9_REG_AUX);
+
+static IIO_DEVICE_ATTR(accel_scale,
+		S_IRUGO | S_IWUSR,
+		kxsd9_read_scale,
+		kxsd9_write_scale,
+		0);
+
+static IIO_CONST_ATTR(accel_scale_available,
+		KXSD9_SCALE_2G " "
+		KXSD9_SCALE_4G " "
+		KXSD9_SCALE_6G " "
+		KXSD9_SCALE_8G);
 
 static struct attribute *kxsd9_attributes[] = {
-	&iio_dev_attr_accel_x.dev_attr.attr,
-	&iio_dev_attr_accel_y.dev_attr.attr,
-	&iio_dev_attr_accel_z.dev_attr.attr,
-	&iio_dev_attr_adc_0.dev_attr.attr,
-	&iio_dev_attr_accel_range.dev_attr.attr,
+	&iio_dev_attr_accel_x_raw.dev_attr.attr,
+	&iio_dev_attr_accel_y_raw.dev_attr.attr,
+	&iio_dev_attr_accel_z_raw.dev_attr.attr,
+	&iio_dev_attr_in0_raw.dev_attr.attr,
+	&iio_dev_attr_accel_scale.dev_attr.attr,
+	&iio_const_attr_accel_scale_available.dev_attr.attr,
 	NULL,
 };
 

drivers/staging/iio/accel/lis3l02dq.h

@@ -179,10 +179,6 @@ int lis3l02dq_spi_read_reg_8(struct device *dev,
 int lis3l02dq_spi_write_reg_8(struct device *dev,
 			      u8 reg_address,
 			      u8 *val);
-#define LIS3L02DQ_SCAN_ACC_X 0
-#define LIS3L02DQ_SCAN_ACC_Y 1
-#define LIS3L02DQ_SCAN_ACC_Z 2
-
 
 #ifdef CONFIG_IIO_RING_BUFFER
 /* At the moment triggers are only used for ring buffer

drivers/staging/iio/accel/lis3l02dq_core.c

@@ -458,41 +458,39 @@ static int lis3l02dq_initial_setup(struct lis3l02dq_state *st)
 	return ret;
 }
 
-static IIO_DEV_ATTR_ACCEL_X_OFFSET(S_IWUSR | S_IRUGO,
-				   lis3l02dq_read_signed,
-				   lis3l02dq_write_signed,
-				   LIS3L02DQ_REG_OFFSET_X_ADDR);
-
-static IIO_DEV_ATTR_ACCEL_Y_OFFSET(S_IWUSR | S_IRUGO,
-				   lis3l02dq_read_signed,
-				   lis3l02dq_write_signed,
-				   LIS3L02DQ_REG_OFFSET_Y_ADDR);
-
-static IIO_DEV_ATTR_ACCEL_Z_OFFSET(S_IWUSR | S_IRUGO,
-				   lis3l02dq_read_signed,
-				   lis3l02dq_write_signed,
-				   LIS3L02DQ_REG_OFFSET_Z_ADDR);
-
-static IIO_DEV_ATTR_ACCEL_X_GAIN(S_IWUSR | S_IRUGO,
-				 lis3l02dq_read_unsigned,
-				 lis3l02dq_write_unsigned,
-				 LIS3L02DQ_REG_GAIN_X_ADDR);
-
-static IIO_DEV_ATTR_ACCEL_Y_GAIN(S_IWUSR | S_IRUGO,
-				 lis3l02dq_read_unsigned,
-				 lis3l02dq_write_unsigned,
-				 LIS3L02DQ_REG_GAIN_Y_ADDR);
-
-static IIO_DEV_ATTR_ACCEL_Z_GAIN(S_IWUSR | S_IRUGO,
-				 lis3l02dq_read_unsigned,
-				 lis3l02dq_write_unsigned,
-				 LIS3L02DQ_REG_GAIN_Z_ADDR);
-
-static IIO_DEV_ATTR_ACCEL_THRESH(S_IWUSR | S_IRUGO,
-				 lis3l02dq_read_16bit_signed,
-				 lis3l02dq_write_16bit_signed,
-				 LIS3L02DQ_REG_THS_L_ADDR);
-
+#define LIS3L02DQ_SIGNED_ATTR(name, reg)	\
+	IIO_DEVICE_ATTR(name,			\
+			S_IWUSR | S_IRUGO,	\
+			lis3l02dq_read_signed,	\
+			lis3l02dq_write_signed, \
+			reg);
+
+#define LIS3L02DQ_UNSIGNED_ATTR(name, reg)		\
+	IIO_DEVICE_ATTR(name,				\
+			S_IWUSR | S_IRUGO,		\
+			lis3l02dq_read_unsigned,	\
+			lis3l02dq_write_unsigned,	\
+			reg);
+
+static LIS3L02DQ_SIGNED_ATTR(accel_x_calibbias,
+			     LIS3L02DQ_REG_OFFSET_X_ADDR);
+static LIS3L02DQ_SIGNED_ATTR(accel_y_calibbias,
+			     LIS3L02DQ_REG_OFFSET_Y_ADDR);
+static LIS3L02DQ_SIGNED_ATTR(accel_z_calibbias,
+			     LIS3L02DQ_REG_OFFSET_Z_ADDR);
+
+static LIS3L02DQ_UNSIGNED_ATTR(accel_x_calibscale,
+			       LIS3L02DQ_REG_GAIN_X_ADDR);
+static LIS3L02DQ_UNSIGNED_ATTR(accel_y_calibscale,
+			       LIS3L02DQ_REG_GAIN_Y_ADDR);
+static LIS3L02DQ_UNSIGNED_ATTR(accel_z_calibscale,
+			       LIS3L02DQ_REG_GAIN_Z_ADDR);
+
+static IIO_DEVICE_ATTR(accel_mag_either_rising_value,
+		       S_IWUSR | S_IRUGO,
+		       lis3l02dq_read_16bit_signed,
+		       lis3l02dq_write_16bit_signed,
+		       LIS3L02DQ_REG_THS_L_ADDR);
 /* RFC The reading method for these will change depending on whether
  * ring buffer capture is in use. Is it worth making these take two
  * functions and let the core handle which to call, or leave as in this
@@ -512,7 +510,7 @@ static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
 			      lis3l02dq_read_frequency,
 			      lis3l02dq_write_frequency);
 
-static IIO_CONST_ATTR_AVAIL_SAMP_FREQ("280 560 1120 4480");
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("280 560 1120 4480");
 
 static ssize_t lis3l02dq_read_interrupt_config(struct device *dev,
 					       struct device_attribute *attr,
@@ -522,7 +520,7 @@ static ssize_t lis3l02dq_read_interrupt_config(struct device *dev,
 	s8 val;
 	struct iio_event_attr *this_attr = to_iio_event_attr(attr);
 
-	ret = lis3l02dq_spi_read_reg_8(dev,
+	ret = lis3l02dq_spi_read_reg_8(dev->parent,
 				       LIS3L02DQ_REG_WAKE_UP_CFG_ADDR,
 				       (u8 *)&val);
 
@@ -545,7 +543,7 @@ static ssize_t lis3l02dq_write_interrupt_config(struct device *dev,
 
 	mutex_lock(&indio_dev->mlock);
 	/* read current value */
-	ret = lis3l02dq_spi_read_reg_8(dev,
+	ret = lis3l02dq_spi_read_reg_8(dev->parent,
 				       LIS3L02DQ_REG_WAKE_UP_CFG_ADDR,
 				       &valold);
 	if (ret)
@@ -618,7 +616,7 @@ static int lis3l02dq_thresh_handler_th(struct iio_dev *dev_info,
 static void lis3l02dq_thresh_handler_bh_no_check(struct work_struct *work_s)
 {
 	struct iio_work_cont *wc
-		= container_of(work_s, struct iio_work_cont, ws_nocheck);
+		= container_of(work_s, struct iio_work_cont, ws);
 	struct lis3l02dq_state *st = wc->st;
 	u8 t;
 
@@ -668,43 +666,51 @@ static void lis3l02dq_thresh_handler_bh_no_check(struct work_struct *work_s)
 /* A shared handler for a number of threshold types */
 IIO_EVENT_SH(threshold, &lis3l02dq_thresh_handler_th);
 
-IIO_EVENT_ATTR_ACCEL_X_HIGH_SH(iio_event_threshold,
-			       lis3l02dq_read_interrupt_config,
-			       lis3l02dq_write_interrupt_config,
-			       LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_HIGH);
-
-IIO_EVENT_ATTR_ACCEL_Y_HIGH_SH(iio_event_threshold,
-			       lis3l02dq_read_interrupt_config,
-			       lis3l02dq_write_interrupt_config,
-			       LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_HIGH);
-
-IIO_EVENT_ATTR_ACCEL_Z_HIGH_SH(iio_event_threshold,
-			       lis3l02dq_read_interrupt_config,
-			       lis3l02dq_write_interrupt_config,
-			       LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_HIGH);
-
-IIO_EVENT_ATTR_ACCEL_X_LOW_SH(iio_event_threshold,
-			      lis3l02dq_read_interrupt_config,
-			      lis3l02dq_write_interrupt_config,
-			      LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_LOW);
-
-IIO_EVENT_ATTR_ACCEL_Y_LOW_SH(iio_event_threshold,
-			      lis3l02dq_read_interrupt_config,
-			      lis3l02dq_write_interrupt_config,
-			      LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_LOW);
+IIO_EVENT_ATTR_SH(accel_x_mag_pos_rising_en,
+		  iio_event_threshold,
+		  lis3l02dq_read_interrupt_config,
+		  lis3l02dq_write_interrupt_config,
+		  LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_HIGH);
+
+IIO_EVENT_ATTR_SH(accel_y_mag_pos_rising_en,
+		  iio_event_threshold,
+		  lis3l02dq_read_interrupt_config,
+		  lis3l02dq_write_interrupt_config,
+		  LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_HIGH);
+
+IIO_EVENT_ATTR_SH(accel_z_mag_pos_rising_en,
+		  iio_event_threshold,
+		  lis3l02dq_read_interrupt_config,
+		  lis3l02dq_write_interrupt_config,
+		  LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_HIGH);
+
+IIO_EVENT_ATTR_SH(accel_x_mag_neg_rising_en,
+		  iio_event_threshold,
+		  lis3l02dq_read_interrupt_config,
+		  lis3l02dq_write_interrupt_config,
+		  LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_LOW);
+
+IIO_EVENT_ATTR_SH(accel_y_mag_neg_rising_en,
+		  iio_event_threshold,
+		  lis3l02dq_read_interrupt_config,
+		  lis3l02dq_write_interrupt_config,
+		  LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_LOW);
+
+IIO_EVENT_ATTR_SH(accel_z_mag_neg_rising_en,
+		  iio_event_threshold,
+		  lis3l02dq_read_interrupt_config,
+		  lis3l02dq_write_interrupt_config,
+		  LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_LOW);
 
-IIO_EVENT_ATTR_ACCEL_Z_LOW_SH(iio_event_threshold,
-			      lis3l02dq_read_interrupt_config,
-			      lis3l02dq_write_interrupt_config,
-			      LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_LOW);
 
 static struct attribute *lis3l02dq_event_attributes[] = {
-	&iio_event_attr_accel_x_high.dev_attr.attr,
-	&iio_event_attr_accel_y_high.dev_attr.attr,
-	&iio_event_attr_accel_z_high.dev_attr.attr,
-	&iio_event_attr_accel_x_low.dev_attr.attr,
-	&iio_event_attr_accel_y_low.dev_attr.attr,
-	&iio_event_attr_accel_z_low.dev_attr.attr,
+	&iio_event_attr_accel_x_mag_pos_rising_en.dev_attr.attr,
+	&iio_event_attr_accel_y_mag_pos_rising_en.dev_attr.attr,
+	&iio_event_attr_accel_z_mag_pos_rising_en.dev_attr.attr,
+	&iio_event_attr_accel_x_mag_neg_rising_en.dev_attr.attr,
+	&iio_event_attr_accel_y_mag_neg_rising_en.dev_attr.attr,
+	&iio_event_attr_accel_z_mag_neg_rising_en.dev_attr.attr,
+	&iio_dev_attr_accel_mag_either_rising_value.dev_attr.attr,
 	NULL
 };
 
@@ -713,20 +719,21 @@ static struct attribute_group lis3l02dq_event_attribute_group = {
 };
 
 static IIO_CONST_ATTR(name, "lis3l02dq");
+static IIO_CONST_ATTR(accel_scale, "0.00958");
 
 static struct attribute *lis3l02dq_attributes[] = {
-	&iio_dev_attr_accel_x_offset.dev_attr.attr,
-	&iio_dev_attr_accel_y_offset.dev_attr.attr,
-	&iio_dev_attr_accel_z_offset.dev_attr.attr,
-	&iio_dev_attr_accel_x_gain.dev_attr.attr,
-	&iio_dev_attr_accel_y_gain.dev_attr.attr,
-	&iio_dev_attr_accel_z_gain.dev_attr.attr,
-	&iio_dev_attr_thresh.dev_attr.attr,
-	&iio_dev_attr_accel_x.dev_attr.attr,
-	&iio_dev_attr_accel_y.dev_attr.attr,
-	&iio_dev_attr_accel_z.dev_attr.attr,
+	&iio_dev_attr_accel_x_calibbias.dev_attr.attr,
+	&iio_dev_attr_accel_y_calibbias.dev_attr.attr,
+	&iio_dev_attr_accel_z_calibbias.dev_attr.attr,
+	&iio_dev_attr_accel_x_calibscale.dev_attr.attr,
+	&iio_dev_attr_accel_y_calibscale.dev_attr.attr,
+	&iio_dev_attr_accel_z_calibscale.dev_attr.attr,
+	&iio_const_attr_accel_scale.dev_attr.attr,
+	&iio_dev_attr_accel_x_raw.dev_attr.attr,
+	&iio_dev_attr_accel_y_raw.dev_attr.attr,
+	&iio_dev_attr_accel_z_raw.dev_attr.attr,
 	&iio_dev_attr_sampling_frequency.dev_attr.attr,
-	&iio_const_attr_available_sampling_frequency.dev_attr.attr,
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
 	&iio_const_attr_name.dev_attr.attr,
 	NULL
 };

drivers/staging/iio/accel/lis3l02dq_ring.c

@@ -75,16 +75,16 @@ static int lis3l02dq_scan_el_set_state(struct iio_scan_el *scan_el,
 	return ret;
 
 }
-static IIO_SCAN_EL_C(accel_x, LIS3L02DQ_SCAN_ACC_X, IIO_SIGNED(16),
+static IIO_SCAN_EL_C(accel_x, 0, IIO_SIGNED(16),
 		     LIS3L02DQ_REG_OUT_X_L_ADDR,
 		     &lis3l02dq_scan_el_set_state);
-static IIO_SCAN_EL_C(accel_y, LIS3L02DQ_SCAN_ACC_Y, IIO_SIGNED(16),
+static IIO_SCAN_EL_C(accel_y, 1, IIO_SIGNED(16),
 		     LIS3L02DQ_REG_OUT_Y_L_ADDR,
 		     &lis3l02dq_scan_el_set_state);
-static IIO_SCAN_EL_C(accel_z, LIS3L02DQ_SCAN_ACC_Z, IIO_SIGNED(16),
+static IIO_SCAN_EL_C(accel_z, 2, IIO_SIGNED(16),
 		     LIS3L02DQ_REG_OUT_Z_L_ADDR,
 		     &lis3l02dq_scan_el_set_state);
-static IIO_SCAN_EL_TIMESTAMP;
+static IIO_SCAN_EL_TIMESTAMP(3);
 
 static struct attribute *lis3l02dq_scan_el_attrs[] = {
 	&iio_scan_el_accel_x.dev_attr.attr,

drivers/staging/iio/accel/sca3000.h

@@ -187,6 +187,7 @@ struct sca3000_state {
 /**
  * struct sca3000_chip_info - model dependant parameters
  * @name: 			model identification
+ * @scale:			string containing floating point scale factor
  * @temp_output:		some devices have temperature sensors.
  * @measurement_mode_freq:	normal mode sampling frequency
  * @option_mode_1:		first optional mode. Not all models have one
@@ -199,6 +200,7 @@ struct sca3000_state {
  **/
 struct sca3000_chip_info {
 	const char		*name;
+	const char		*scale;
 	bool			temp_output;
 	int			measurement_mode_freq;
 	int			option_mode_1;

drivers/staging/iio/accel/sca3000_core.c

@@ -27,11 +27,9 @@
 
 enum sca3000_variant {
 	d01,
-	d03,
 	e02,
 	e04,
 	e05,
-	l01,
 };
 
 /* Note where option modes are not defined, the chip simply does not
@@ -44,21 +42,20 @@ enum sca3000_variant {
 static const struct sca3000_chip_info sca3000_spi_chip_info_tbl[] = {
 	{
 		.name = "sca3000-d01",
+		.scale = " 0.0073575",
 		.temp_output = true,
 		.measurement_mode_freq = 250,
 		.option_mode_1 = SCA3000_OP_MODE_BYPASS,
 		.option_mode_1_freq = 250,
-	}, {
-		/* No data sheet available - may be the same as the 3100-d03?*/
-		.name = "sca3000-d03",
-		.temp_output = true,
 	}, {
 		.name = "sca3000-e02",
+		.scale = "0.00981",
 		.measurement_mode_freq = 125,
 		.option_mode_1 = SCA3000_OP_MODE_NARROW,
 		.option_mode_1_freq = 63,
 	}, {
 		.name = "sca3000-e04",
+		.scale = "0.01962",
 		.measurement_mode_freq = 100,
 		.option_mode_1 = SCA3000_OP_MODE_NARROW,
 		.option_mode_1_freq = 50,
@@ -66,18 +63,12 @@ static const struct sca3000_chip_info sca3000_spi_chip_info_tbl[] = {
 		.option_mode_2_freq = 400,
 	}, {
 		.name = "sca3000-e05",
+		.scale = "0.0613125",
 		.measurement_mode_freq = 200,
 		.option_mode_1 = SCA3000_OP_MODE_NARROW,
 		.option_mode_1_freq = 50,
 		.option_mode_2 = SCA3000_OP_MODE_WIDE,
 		.option_mode_2_freq = 400,
-	}, {
-		/* No data sheet available.
-		 * Frequencies are unknown.
-		 */
-		.name = "sca3000-l01",
-		.temp_output = true,
-		.option_mode_1 = SCA3000_OP_MODE_BYPASS,
 	},
 };
 
@@ -327,6 +318,14 @@ static ssize_t sca3000_read_13bit_signed(struct device *dev,
 	return ret ? ret : len;
 }
 
+static ssize_t sca3000_show_scale(struct device *dev,
+				  struct device_attribute *attr,
+				  char *buf)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct sca3000_state *st = dev_info->dev_data;
+	return sprintf(buf, "%s\n", st->info->scale);
+}
 
 static ssize_t sca3000_show_name(struct device *dev,
 				 struct device_attribute *attr,
@@ -495,7 +494,7 @@ sca3000_store_measurement_mode(struct device *dev,
 /* Not even vaguely standard attributes so defined here rather than
  * in the relevant IIO core headers
  */
-static IIO_DEVICE_ATTR(available_measurement_modes, S_IRUGO,
+static IIO_DEVICE_ATTR(measurement_mode_available, S_IRUGO,
 		       sca3000_show_available_measurement_modes,
 		       NULL, 0);
 
@@ -508,6 +507,8 @@ static IIO_DEVICE_ATTR(measurement_mode, S_IRUGO | S_IWUSR,
 
 static IIO_DEV_ATTR_NAME(sca3000_show_name);
 static IIO_DEV_ATTR_REV(sca3000_show_rev);
+static IIO_DEVICE_ATTR(accel_scale, S_IRUGO, sca3000_show_scale,
+		       NULL, 0);
 
 static IIO_DEV_ATTR_ACCEL_X(sca3000_read_13bit_signed,
 			    SCA3000_REG_ADDR_X_MSB);
@@ -683,7 +684,7 @@ static ssize_t sca3000_set_frequency(struct device *dev,
 /* Should only really be registered if ring buffer support is compiled in.
  * Does no harm however and doing it right would add a fair bit of complexity
  */
-static IIO_DEV_ATTR_AVAIL_SAMP_FREQ(sca3000_read_av_freq);
+static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(sca3000_read_av_freq);
 
 static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
 			      sca3000_read_frequency,
@@ -718,7 +719,10 @@ static ssize_t sca3000_read_temp(struct device *dev,
 error_ret:
 	return ret;
 }
-static IIO_DEV_ATTR_TEMP(sca3000_read_temp);
+static IIO_DEV_ATTR_TEMP_RAW(sca3000_read_temp);
+
+static IIO_CONST_ATTR(temp_scale, "0.555556");
+static IIO_CONST_ATTR(temp_offset, "-214.6");
 
 /**
  * sca3000_show_thresh() sysfs query of a threshold
@@ -770,31 +774,34 @@ static ssize_t sca3000_write_thresh(struct device *dev,
 	return ret ? ret : len;
 }
 
-static IIO_DEV_ATTR_ACCEL_THRESH_X(S_IRUGO | S_IWUSR,
-				   sca3000_show_thresh,
-				   sca3000_write_thresh,
-				   SCA3000_REG_CTRL_SEL_MD_X_TH);
-static IIO_DEV_ATTR_ACCEL_THRESH_Y(S_IRUGO | S_IWUSR,
-				   sca3000_show_thresh,
-				   sca3000_write_thresh,
-				   SCA3000_REG_CTRL_SEL_MD_Y_TH);
-static IIO_DEV_ATTR_ACCEL_THRESH_Z(S_IRUGO | S_IWUSR,
-				   sca3000_show_thresh,
-				   sca3000_write_thresh,
-				   SCA3000_REG_CTRL_SEL_MD_Z_TH);
+static IIO_DEVICE_ATTR(accel_x_mag_either_rising_value,
+		S_IRUGO | S_IWUSR,
+		sca3000_show_thresh,
+		sca3000_write_thresh,
+		SCA3000_REG_CTRL_SEL_MD_X_TH);
+
+static IIO_DEVICE_ATTR(accel_y_mag_either_rising_value,
+		S_IRUGO | S_IWUSR,
+		sca3000_show_thresh,
+		sca3000_write_thresh,
+		SCA3000_REG_CTRL_SEL_MD_Y_TH);
+
+static IIO_DEVICE_ATTR(accel_z_mag_either_rising_value,
+		S_IRUGO | S_IWUSR,
+		sca3000_show_thresh,
+		sca3000_write_thresh,
+		SCA3000_REG_CTRL_SEL_MD_Z_TH);
 
 static struct attribute *sca3000_attributes[] = {
 	&iio_dev_attr_name.dev_attr.attr,
 	&iio_dev_attr_revision.dev_attr.attr,
-	&iio_dev_attr_accel_x.dev_attr.attr,
-	&iio_dev_attr_accel_y.dev_attr.attr,
-	&iio_dev_attr_accel_z.dev_attr.attr,
-	&iio_dev_attr_thresh_accel_x.dev_attr.attr,
-	&iio_dev_attr_thresh_accel_y.dev_attr.attr,
-	&iio_dev_attr_thresh_accel_z.dev_attr.attr,
-	&iio_dev_attr_available_measurement_modes.dev_attr.attr,
+	&iio_dev_attr_accel_scale.dev_attr.attr,
+	&iio_dev_attr_accel_x_raw.dev_attr.attr,
+	&iio_dev_attr_accel_y_raw.dev_attr.attr,
+	&iio_dev_attr_accel_z_raw.dev_attr.attr,
+	&iio_dev_attr_measurement_mode_available.dev_attr.attr,
 	&iio_dev_attr_measurement_mode.dev_attr.attr,
-	&iio_dev_attr_available_sampling_frequency.dev_attr.attr,
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 	&iio_dev_attr_sampling_frequency.dev_attr.attr,
 	NULL,
 };
@@ -802,18 +809,18 @@ static struct attribute *sca3000_attributes[] = {
 static struct attribute *sca3000_attributes_with_temp[] = {
 	&iio_dev_attr_name.dev_attr.attr,
 	&iio_dev_attr_revision.dev_attr.attr,
-	&iio_dev_attr_accel_x.dev_attr.attr,
-	&iio_dev_attr_accel_y.dev_attr.attr,
-	&iio_dev_attr_accel_z.dev_attr.attr,
-	&iio_dev_attr_thresh_accel_x.dev_attr.attr,
-	&iio_dev_attr_thresh_accel_y.dev_attr.attr,
-	&iio_dev_attr_thresh_accel_z.dev_attr.attr,
-	&iio_dev_attr_available_measurement_modes.dev_attr.attr,
+	&iio_dev_attr_accel_scale.dev_attr.attr,
+	&iio_dev_attr_accel_x_raw.dev_attr.attr,
+	&iio_dev_attr_accel_y_raw.dev_attr.attr,
+	&iio_dev_attr_accel_z_raw.dev_attr.attr,
+	&iio_dev_attr_measurement_mode_available.dev_attr.attr,
 	&iio_dev_attr_measurement_mode.dev_attr.attr,
-	&iio_dev_attr_available_sampling_frequency.dev_attr.attr,
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
 	&iio_dev_attr_sampling_frequency.dev_attr.attr,
 	/* Only present if temp sensor is */
-	&iio_dev_attr_temp.dev_attr.attr,
+	&iio_dev_attr_temp_raw.dev_attr.attr,
+	&iio_const_attr_temp_offset.dev_attr.attr,
+	&iio_const_attr_temp_scale.dev_attr.attr,
 	NULL,
 };
 
@@ -910,7 +917,7 @@ static ssize_t sca3000_query_mo_det(struct device *dev,
 				    struct device_attribute *attr,
 				    char *buf)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev->parent);
 	struct sca3000_state *st = indio_dev->dev_data;
 	struct iio_event_attr *this_attr = to_iio_event_attr(attr);
 	int ret, len = 0;
@@ -975,7 +982,7 @@ static ssize_t sca3000_query_ring_int(struct device *dev,
 	struct iio_event_attr *this_attr = to_iio_event_attr(attr);
 	int ret, len;
 	u8 *rx;
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev->parent);
 	struct sca3000_state *st = indio_dev->dev_data;
 	mutex_lock(&st->lock);
 	ret = sca3000_read_data(st, SCA3000_REG_ADDR_INT_MASK, &rx, 1);
@@ -995,7 +1002,7 @@ static ssize_t sca3000_set_ring_int(struct device *dev,
 				      const char *buf,
 				      size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev->parent);
 	struct sca3000_state *st = indio_dev->dev_data;
 	struct iio_event_attr *this_attr = to_iio_event_attr(attr);
 
@@ -1085,7 +1092,7 @@ static ssize_t sca3000_set_mo_det(struct device *dev,
 				  const char *buf,
 				  size_t len)
 {
-	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev->parent);
 	struct sca3000_state *st = indio_dev->dev_data;
 	struct iio_event_attr *this_attr = to_iio_event_attr(attr);
 	long val;
@@ -1155,20 +1162,23 @@ IIO_EVENT_ATTR_FREE_FALL_DETECT_SH(iio_event_all,
 				   0)
 
 /* Motion detector related event attributes */
-IIO_EVENT_ATTR_ACCEL_X_HIGH_SH(iio_event_all,
-			       sca3000_query_mo_det,
-			       sca3000_set_mo_det,
-			       SCA3000_MD_CTRL_OR_X);
-
-IIO_EVENT_ATTR_ACCEL_Y_HIGH_SH(iio_event_all,
-			       sca3000_query_mo_det,
-			       sca3000_set_mo_det,
-			       SCA3000_MD_CTRL_OR_Y);
-
-IIO_EVENT_ATTR_ACCEL_Z_HIGH_SH(iio_event_all,
-			       sca3000_query_mo_det,
-			       sca3000_set_mo_det,
-			       SCA3000_MD_CTRL_OR_Z);
+IIO_EVENT_ATTR_SH(accel_x_mag_either_rising_en,
+		  iio_event_all,
+		  sca3000_query_mo_det,
+		  sca3000_set_mo_det,
+		  SCA3000_MD_CTRL_OR_X);
+
+IIO_EVENT_ATTR_SH(accel_y_mag_either_rising_en,
+		  iio_event_all,
+		  sca3000_query_mo_det,
+		  sca3000_set_mo_det,
+		  SCA3000_MD_CTRL_OR_Y);
+
+IIO_EVENT_ATTR_SH(accel_z_mag_either_rising_en,
+		  iio_event_all,
+		  sca3000_query_mo_det,
+		  sca3000_set_mo_det,
+		  SCA3000_MD_CTRL_OR_Z);
 
 /* Hardware ring buffer related event attributes */
 IIO_EVENT_ATTR_RING_50_FULL_SH(iio_event_all,
@@ -1183,11 +1193,14 @@ IIO_EVENT_ATTR_RING_75_FULL_SH(iio_event_all,
 
 static struct attribute *sca3000_event_attributes[] = {
 	&iio_event_attr_free_fall.dev_attr.attr,
-	&iio_event_attr_accel_x_high.dev_attr.attr,
-	&iio_event_attr_accel_y_high.dev_attr.attr,
-	&iio_event_attr_accel_z_high.dev_attr.attr,
+	&iio_event_attr_accel_x_mag_either_rising_en.dev_attr.attr,
+	&iio_event_attr_accel_y_mag_either_rising_en.dev_attr.attr,
+	&iio_event_attr_accel_z_mag_either_rising_en.dev_attr.attr,
 	&iio_event_attr_ring_50_full.dev_attr.attr,
 	&iio_event_attr_ring_75_full.dev_attr.attr,
+	&iio_dev_attr_accel_x_mag_either_rising_value.dev_attr.attr,
+	&iio_dev_attr_accel_y_mag_either_rising_value.dev_attr.attr,
+	&iio_dev_attr_accel_z_mag_either_rising_value.dev_attr.attr,
 	NULL,
 };
 
@@ -1344,9 +1357,10 @@ static int __devinit __sca3000_probe(struct spi_device *spi,
 		 * is overkill.  At very least a simpler registration method
 		 * might be worthwhile.
 		 */
-		iio_add_event_to_list(iio_event_attr_accel_z_high.listel,
-					    &st->indio_dev
-					    ->interrupts[0]->ev_list);
+		iio_add_event_to_list(
+			iio_event_attr_accel_z_mag_either_rising_en.listel,
+			&st->indio_dev
+			->interrupts[0]->ev_list);
 	}
 	sca3000_register_ring_funcs(st->indio_dev);
 	ret = sca3000_clean_setup(st);
@@ -1437,9 +1451,6 @@ static int sca3000_remove(struct spi_device *spi)
 SCA3000_VARIANT_PROBE(d01);
 static SCA3000_VARIANT_SPI_DRIVER(d01);
 
-SCA3000_VARIANT_PROBE(d03);
-static SCA3000_VARIANT_SPI_DRIVER(d03);
-
 SCA3000_VARIANT_PROBE(e02);
 static SCA3000_VARIANT_SPI_DRIVER(e02);
 
@@ -1449,9 +1460,6 @@ static SCA3000_VARIANT_SPI_DRIVER(e04);
 SCA3000_VARIANT_PROBE(e05);
 static SCA3000_VARIANT_SPI_DRIVER(e05);
 
-SCA3000_VARIANT_PROBE(l01);
-static SCA3000_VARIANT_SPI_DRIVER(l01);
-
 static __init int sca3000_init(void)
 {
 	int ret;
@@ -1459,32 +1467,22 @@ static __init int sca3000_init(void)
 	ret = spi_register_driver(&sca3000_d01_driver);
 	if (ret)
 		goto error_ret;
-	ret = spi_register_driver(&sca3000_d03_driver);
-	if (ret)
-		goto error_unreg_d01;
 	ret = spi_register_driver(&sca3000_e02_driver);
 	if (ret)
-		goto error_unreg_d03;
+		goto error_unreg_d01;
 	ret = spi_register_driver(&sca3000_e04_driver);
 	if (ret)
 		goto error_unreg_e02;
 	ret = spi_register_driver(&sca3000_e05_driver);
 	if (ret)
 		goto error_unreg_e04;
-	ret = spi_register_driver(&sca3000_l01_driver);
-	if (ret)
-		goto error_unreg_e05;
 
 	return 0;
 
-error_unreg_e05:
-	spi_unregister_driver(&sca3000_e05_driver);
 error_unreg_e04:
 	spi_unregister_driver(&sca3000_e04_driver);
 error_unreg_e02:
 	spi_unregister_driver(&sca3000_e02_driver);
-error_unreg_d03:
-	spi_unregister_driver(&sca3000_d03_driver);
 error_unreg_d01:
 	spi_unregister_driver(&sca3000_d01_driver);
 error_ret:
@@ -1494,11 +1492,9 @@ static __init int sca3000_init(void)
 
 static __exit void sca3000_exit(void)
 {
-	spi_unregister_driver(&sca3000_l01_driver);
 	spi_unregister_driver(&sca3000_e05_driver);
 	spi_unregister_driver(&sca3000_e04_driver);
 	spi_unregister_driver(&sca3000_e02_driver);
-	spi_unregister_driver(&sca3000_d03_driver);
 	spi_unregister_driver(&sca3000_d01_driver);
 }
 

drivers/staging/iio/accel/sca3000_ring.c

@@ -186,11 +186,29 @@ static ssize_t sca3000_store_ring_bpse(struct device *dev,
 	return ret ? ret : len;
 }
 
-static IIO_CONST_ATTR(bpse_available, "8 11");
+static IIO_SCAN_EL_C(accel_x, 0, 0, 0, 0);
+static IIO_SCAN_EL_C(accel_y, 1, 0, 0, 0);
+static IIO_SCAN_EL_C(accel_z, 2, 0, 0, 0);
+static IIO_CONST_ATTR(accel_precision_available, "8 11");
+static IIO_DEVICE_ATTR(accel_precision,
+		       S_IRUGO | S_IWUSR,
+		       sca3000_show_ring_bpse,
+		       sca3000_store_ring_bpse,
+		       0);
+
+static struct attribute *sca3000_scan_el_attrs[] = {
+	&iio_scan_el_accel_x.dev_attr.attr,
+	&iio_scan_el_accel_y.dev_attr.attr,
+	&iio_scan_el_accel_z.dev_attr.attr,
+	&iio_const_attr_accel_precision_available.dev_attr.attr,
+	&iio_dev_attr_accel_precision.dev_attr.attr,
+	NULL
+};
 
-static IIO_DEV_ATTR_BPSE(S_IRUGO | S_IWUSR,
-			      sca3000_show_ring_bpse,
-			      sca3000_store_ring_bpse);
+static struct attribute_group sca3000_scan_el_group = {
+	.attrs = sca3000_scan_el_attrs,
+	.name = "scan_elements",
+};
 
 /*
  * Ring buffer attributes
@@ -198,17 +216,15 @@ static IIO_DEV_ATTR_BPSE(S_IRUGO | S_IWUSR,
  * only apply to the ring buffer.  At all times full rate and accuracy
  * is available via direct reading from registers.
  */
-static struct attribute *iio_ring_attributes[] = {
+static struct attribute *sca3000_ring_attributes[] = {
 	&dev_attr_length.attr,
 	&dev_attr_bps.attr,
 	&dev_attr_ring_enable.attr,
-	&iio_dev_attr_bpse.dev_attr.attr,
-	&iio_const_attr_bpse_available.dev_attr.attr,
 	NULL,
 };
 
 static struct attribute_group sca3000_ring_attr = {
-	.attrs = iio_ring_attributes,
+	.attrs = sca3000_ring_attributes,
 };
 
 static const struct attribute_group *sca3000_ring_attr_groups[] = {
@@ -248,6 +264,7 @@ static inline void sca3000_rb_free(struct iio_ring_buffer *r)
 
 int sca3000_configure_ring(struct iio_dev *indio_dev)
 {
+	indio_dev->scan_el_attrs = &sca3000_scan_el_group;
 	indio_dev->ring = sca3000_rb_allocate(indio_dev);
 	if (indio_dev->ring == NULL)
 		return -ENOMEM;

drivers/staging/iio/ring_generic.h

@@ -248,9 +248,9 @@ ssize_t iio_scan_el_ts_show(struct device *dev, struct device_attribute *attr,
  *
  * Odd one out. Handled slightly differently from other scan elements.
  **/
-#define IIO_SCAN_EL_TIMESTAMP					\
+#define IIO_SCAN_EL_TIMESTAMP(number)				\
 	struct iio_scan_el iio_scan_el_timestamp = {		\
-		.dev_attr = __ATTR(scan_en_timestamp,		\
+		.dev_attr = __ATTR(number##_timestamp_en,	\
 				   S_IRUGO | S_IWUSR,		\
 				   iio_scan_el_ts_show,		\
 				   iio_scan_el_ts_store),	\