ASoC: ux500: Move DMA parameters into ux500_msp

Move struct ux500_msp_dma_params declaration from ux500_msp_i2s_drvdata
to ux500_msp, this saves some confusing pointer passing and allows to
access all DMA configuration fields from ux500_msp_i2s.
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@linaro.org>

sound/soc/ux500/ux500_msp_dai.c

@@ -658,14 +658,11 @@ static int ux500_msp_dai_probe(struct snd_soc_dai *dai)
 {
 	struct ux500_msp_i2s_drvdata *drvdata = dev_get_drvdata(dai->dev);
 
-	drvdata->playback_dma_data.dma_cfg = drvdata->msp->dma_cfg_tx;
-	drvdata->capture_dma_data.dma_cfg = drvdata->msp->dma_cfg_rx;
+	dai->playback_dma_data = &drvdata->msp->playback_dma_data;
+	dai->capture_dma_data = &drvdata->msp->capture_dma_data;
 
-	dai->playback_dma_data = &drvdata->playback_dma_data;
-	dai->capture_dma_data = &drvdata->capture_dma_data;
-
-	drvdata->playback_dma_data.data_size = drvdata->slot_width;
-	drvdata->capture_dma_data.data_size = drvdata->slot_width;
+	drvdata->msp->playback_dma_data.data_size = drvdata->slot_width;
+	drvdata->msp->capture_dma_data.data_size = drvdata->slot_width;
 
 	return 0;
 }

sound/soc/ux500/ux500_msp_dai.h

@@ -51,8 +51,6 @@ enum ux500_msp_clock_id {
 struct ux500_msp_i2s_drvdata {
 	struct ux500_msp *msp;
 	struct regulator *reg_vape;
-	struct ux500_msp_dma_params playback_dma_data;
-	struct ux500_msp_dma_params capture_dma_data;
 	unsigned int fmt;
 	unsigned int tx_mask;
 	unsigned int rx_mask;

sound/soc/ux500/ux500_msp_i2s.c

@@ -367,12 +367,14 @@ static int enable_msp(struct ux500_msp *msp, struct ux500_msp_config *config)
 	}
 
 	/* Make sure the correct DMA-directions are configured */
-	if ((config->direction & MSP_DIR_RX) && (!msp->dma_cfg_rx)) {
+	if ((config->direction & MSP_DIR_RX) &&
+			!msp->capture_dma_data.dma_cfg) {
 		dev_err(msp->dev, "%s: ERROR: MSP RX-mode is not configured!",
 			__func__);
 		return -EINVAL;
 	}
-	if ((config->direction == MSP_DIR_TX) && (!msp->dma_cfg_tx)) {
+	if ((config->direction == MSP_DIR_TX) &&
+			!msp->playback_dma_data.dma_cfg) {
 		dev_err(msp->dev, "%s: ERROR: MSP TX-mode is not configured!",
 			__func__);
 		return -EINVAL;
@@ -673,8 +675,8 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev,
 
 	msp->id = platform_data->id;
 	msp->dev = &pdev->dev;
-	msp->dma_cfg_rx = platform_data->msp_i2s_dma_rx;
-	msp->dma_cfg_tx = platform_data->msp_i2s_dma_tx;
+	msp->playback_dma_data.dma_cfg = platform_data->msp_i2s_dma_tx;
+	msp->capture_dma_data.dma_cfg = platform_data->msp_i2s_dma_rx;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (res == NULL) {

sound/soc/ux500/ux500_msp_i2s.h

@@ -468,12 +468,17 @@ struct ux500_msp_config {
 	unsigned int iodelay;
 };
 
+struct ux500_msp_dma_params {
+	unsigned int data_size;
+	struct stedma40_chan_cfg *dma_cfg;
+};
+
 struct ux500_msp {
 	enum msp_i2s_id id;
 	void __iomem *registers;
 	struct device *dev;
-	struct stedma40_chan_cfg *dma_cfg_rx;
-	struct stedma40_chan_cfg *dma_cfg_tx;
+	struct ux500_msp_dma_params playback_dma_data;
+	struct ux500_msp_dma_params capture_dma_data;
 	enum msp_state msp_state;
 	int def_elem_len;
 	unsigned int dir_busy;
@@ -481,11 +486,6 @@ struct ux500_msp {
 	unsigned int f_bitclk;
 };
 
-struct ux500_msp_dma_params {
-	unsigned int data_size;
-	struct stedma40_chan_cfg *dma_cfg;
-};
-
 struct msp_i2s_platform_data;
 int ux500_msp_i2s_init_msp(struct platform_device *pdev,
 			struct ux500_msp **msp_p,