Commit f41003a2 authored by Sean Young's avatar Sean Young Committed by Mauro Carvalho Chehab

[media] staging: lirc_imon: port remaining usb ids to imon and remove

The staging lirc_imon driver contains 4 usb ids. Two of those have a VFD
and two don't. The VFD code is exactly the same in the mainline imon
driver, so that part is easily ported.

The staging driver produces raw IR rather than scancodes for the four
devices, so I've ported the raw IR code from staging to mainline imon.

Now that mainline imon can handle these four devices, lirc_imon is no
longer needed.

Compile tested only.
Signed-off-by: default avatarSean Young <sean@mess.org>
Cc: Venky Raju <dev@venky.ws>
Cc: Jarod Wilson <jarod@redhat.com>
Cc: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent d48982f4
......@@ -92,6 +92,7 @@ struct imon_usb_dev_descr {
__u16 flags;
#define IMON_NO_FLAGS 0
#define IMON_NEED_20MS_PKT_DELAY 1
#define IMON_IR_RAW 2
struct imon_panel_key_table key_table[];
};
......@@ -122,6 +123,12 @@ struct imon_context {
unsigned char usb_tx_buf[8];
unsigned int send_packet_delay;
struct rx_data {
int count; /* length of 0 or 1 sequence */
int prev_bit; /* logic level of sequence */
int initial_space; /* initial space flag */
} rx;
struct tx_t {
unsigned char data_buf[35]; /* user data buffer */
struct completion finished; /* wait for write to finish */
......@@ -324,6 +331,10 @@ static const struct imon_usb_dev_descr imon_DH102 = {
}
};
static const struct imon_usb_dev_descr imon_ir_raw = {
.flags = IMON_IR_RAW,
};
/*
* USB Device ID for iMON USB Control Boards
*
......@@ -407,6 +418,18 @@ static struct usb_device_id imon_usb_id_table[] = {
/* device specifics unknown */
{ USB_DEVICE(0x15c2, 0x0046),
.driver_info = (unsigned long)&imon_default_table},
/* TriGem iMON (IR only) -- TG_iMON.inf */
{ USB_DEVICE(0x0aa8, 0x8001),
.driver_info = (unsigned long)&imon_ir_raw},
/* SoundGraph iMON (IR only) -- sg_imon.inf */
{ USB_DEVICE(0x04e8, 0xff30),
.driver_info = (unsigned long)&imon_ir_raw},
/* SoundGraph iMON VFD (IR & VFD) -- iMON_VFD.inf */
{ USB_DEVICE(0x0aa8, 0xffda),
.driver_info = (unsigned long)&imon_ir_raw},
/* SoundGraph iMON SS (IR & VFD) -- iMON_SS.inf */
{ USB_DEVICE(0x15c2, 0xffda),
.driver_info = (unsigned long)&imon_ir_raw},
{}
};
......@@ -1573,8 +1596,91 @@ static int imon_parse_press_type(struct imon_context *ictx,
/**
* Process the incoming packet
*/
static void imon_incoming_packet(struct imon_context *ictx,
/**
* Convert bit count to time duration (in us) and submit
* the value to lirc_dev.
*/
static void submit_data(struct imon_context *context)
{
DEFINE_IR_RAW_EVENT(ev);
ev.pulse = context->rx.prev_bit;
ev.duration = US_TO_NS(context->rx.count * BIT_DURATION);
ir_raw_event_store_with_filter(context->rdev, &ev);
}
/**
* Process the incoming packet
*/
static void imon_incoming_ir_raw(struct imon_context *context,
struct urb *urb, int intf)
{
int len = urb->actual_length;
unsigned char *buf = urb->transfer_buffer;
struct device *dev = context->dev;
int octet, bit;
unsigned char mask;
if (len != 8) {
dev_warn(dev, "imon %s: invalid incoming packet size (len = %d, intf%d)\n",
__func__, len, intf);
return;
}
if (debug)
dev_info(dev, "raw packet: %*ph\n", len, buf);
/*
* Translate received data to pulse and space lengths.
* Received data is active low, i.e. pulses are 0 and
* spaces are 1.
*
* My original algorithm was essentially similar to
* Changwoo Ryu's with the exception that he switched
* the incoming bits to active high and also fed an
* initial space to LIRC at the start of a new sequence
* if the previous bit was a pulse.
*
* I've decided to adopt his algorithm.
*/
if (buf[7] == 1 && context->rx.initial_space) {
/* LIRC requires a leading space */
context->rx.prev_bit = 0;
context->rx.count = 4;
submit_data(context);
context->rx.count = 0;
}
for (octet = 0; octet < 5; ++octet) {
mask = 0x80;
for (bit = 0; bit < 8; ++bit) {
int curr_bit = !(buf[octet] & mask);
if (curr_bit != context->rx.prev_bit) {
if (context->rx.count) {
submit_data(context);
context->rx.count = 0;
}
context->rx.prev_bit = curr_bit;
}
++context->rx.count;
mask >>= 1;
}
}
if (buf[7] == 10) {
if (context->rx.count) {
submit_data(context);
context->rx.count = 0;
}
context->rx.initial_space = context->rx.prev_bit;
}
ir_raw_event_handle(context->rdev);
}
static void imon_incoming_scancode(struct imon_context *ictx,
struct urb *urb, int intf)
{
int len = urb->actual_length;
unsigned char *buf = urb->transfer_buffer;
......@@ -1757,7 +1863,10 @@ static void usb_rx_callback_intf0(struct urb *urb)
break;
case 0:
imon_incoming_packet(ictx, urb, intfnum);
if (ictx->rdev->driver_type == RC_DRIVER_IR_RAW)
imon_incoming_ir_raw(ictx, urb, intfnum);
else
imon_incoming_scancode(ictx, urb, intfnum);
break;
default:
......@@ -1798,7 +1907,10 @@ static void usb_rx_callback_intf1(struct urb *urb)
break;
case 0:
imon_incoming_packet(ictx, urb, intfnum);
if (ictx->rdev->driver_type == RC_DRIVER_IR_RAW)
imon_incoming_ir_raw(ictx, urb, intfnum);
else
imon_incoming_scancode(ictx, urb, intfnum);
break;
default:
......@@ -1906,11 +2018,14 @@ static void imon_set_display_type(struct imon_context *ictx)
case 0x0041:
case 0x0042:
case 0x0043:
case 0x8001:
case 0xff30:
configured_display_type = IMON_DISPLAY_TYPE_NONE;
ictx->display_supported = false;
break;
case 0x0036:
case 0x0044:
case 0xffda:
default:
configured_display_type = IMON_DISPLAY_TYPE_VFD;
break;
......@@ -1935,7 +2050,8 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
const unsigned char fp_packet[] = { 0x40, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x88 };
rdev = rc_allocate_device(RC_DRIVER_SCANCODE);
rdev = rc_allocate_device(ictx->dev_descr->flags & IMON_IR_RAW ?
RC_DRIVER_IR_RAW : RC_DRIVER_SCANCODE);
if (!rdev) {
dev_err(ictx->dev, "remote control dev allocation failed\n");
goto out;
......@@ -1953,7 +2069,11 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
rdev->dev.parent = ictx->dev;
rdev->priv = ictx;
rdev->allowed_protocols = RC_BIT_OTHER | RC_BIT_RC6_MCE; /* iMON PAD or MCE */
if (ictx->dev_descr->flags & IMON_IR_RAW)
rdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
else
/* iMON PAD or MCE */
rdev->allowed_protocols = RC_BIT_OTHER | RC_BIT_RC6_MCE;
rdev->change_protocol = imon_ir_change_protocol;
rdev->driver_name = MOD_NAME;
......@@ -1971,7 +2091,8 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
imon_set_display_type(ictx);
if (ictx->rc_type == RC_BIT_RC6_MCE)
if (ictx->rc_type == RC_BIT_RC6_MCE ||
ictx->dev_descr->flags & IMON_IR_RAW)
rdev->map_name = RC_MAP_IMON_MCE;
else
rdev->map_name = RC_MAP_IMON_PAD;
......
......@@ -12,14 +12,6 @@ menuconfig LIRC_STAGING
if LIRC_STAGING
config LIRC_IMON
tristate "Legacy SoundGraph iMON Receiver and Display"
depends on LIRC && USB
help
Driver for the original SoundGraph iMON IR Receiver and Display
Current generation iMON devices use the input layer imon driver.
config LIRC_SASEM
tristate "Sasem USB IR Remote"
depends on LIRC && USB
......
......@@ -3,7 +3,6 @@
# Each configuration option enables a list of files.
obj-$(CONFIG_LIRC_IMON) += lirc_imon.o
obj-$(CONFIG_LIRC_SASEM) += lirc_sasem.o
obj-$(CONFIG_LIRC_SIR) += lirc_sir.o
obj-$(CONFIG_LIRC_ZILOG) += lirc_zilog.o
/*
* lirc_imon.c: LIRC/VFD/LCD driver for SoundGraph iMON IR/VFD/LCD
* including the iMON PAD model
*
* Copyright(C) 2004 Venky Raju(dev@venky.ws)
* Copyright(C) 2009 Jarod Wilson <jarod@wilsonet.com>
*
* lirc_imon is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <media/lirc.h>
#include <media/lirc_dev.h>
#define MOD_AUTHOR "Venky Raju <dev@venky.ws>"
#define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display"
#define MOD_NAME "lirc_imon"
#define MOD_VERSION "0.8"
#define DISPLAY_MINOR_BASE 144
#define DEVICE_NAME "lcd%d"
#define BUF_CHUNK_SIZE 4
#define BUF_SIZE 128
#define BIT_DURATION 250 /* each bit received is 250us */
/*** P R O T O T Y P E S ***/
/* USB Callback prototypes */
static int imon_probe(struct usb_interface *interface,
const struct usb_device_id *id);
static void imon_disconnect(struct usb_interface *interface);
static void usb_rx_callback(struct urb *urb);
static void usb_tx_callback(struct urb *urb);
/* suspend/resume support */
static int imon_resume(struct usb_interface *intf);
static int imon_suspend(struct usb_interface *intf, pm_message_t message);
/* Display file_operations function prototypes */
static int display_open(struct inode *inode, struct file *file);
static int display_close(struct inode *inode, struct file *file);
/* VFD write operation */
static ssize_t vfd_write(struct file *file, const char __user *buf,
size_t n_bytes, loff_t *pos);
/* LIRC driver function prototypes */
static int ir_open(void *data);
static void ir_close(void *data);
/*** G L O B A L S ***/
#define IMON_DATA_BUF_SZ 35
struct imon_context {
struct usb_device *usbdev;
/* Newer devices have two interfaces */
int display; /* not all controllers do */
int display_isopen; /* display port has been opened */
int ir_isopen; /* IR port open */
int dev_present; /* USB device presence */
struct mutex ctx_lock; /* to lock this object */
wait_queue_head_t remove_ok; /* For unexpected USB disconnects */
int vfd_proto_6p; /* some VFD require a 6th packet */
struct lirc_driver *driver;
struct usb_endpoint_descriptor *rx_endpoint;
struct usb_endpoint_descriptor *tx_endpoint;
struct urb *rx_urb;
struct urb *tx_urb;
unsigned char usb_rx_buf[8];
unsigned char usb_tx_buf[8];
struct rx_data {
int count; /* length of 0 or 1 sequence */
int prev_bit; /* logic level of sequence */
int initial_space; /* initial space flag */
} rx;
struct tx_t {
unsigned char data_buf[IMON_DATA_BUF_SZ]; /* user data buffer */
struct completion finished; /* wait for write to finish */
atomic_t busy; /* write in progress */
int status; /* status of tx completion */
} tx;
};
static const struct file_operations display_fops = {
.owner = THIS_MODULE,
.open = &display_open,
.write = &vfd_write,
.release = &display_close,
.llseek = noop_llseek,
};
/*
* USB Device ID for iMON USB Control Boards
*
* The Windows drivers contain 6 different inf files, more or less one for
* each new device until the 0x0034-0x0046 devices, which all use the same
* driver. Some of the devices in the 34-46 range haven't been definitively
* identified yet. Early devices have either a TriGem Computer, Inc. or a
* Samsung vendor ID (0x0aa8 and 0x04e8 respectively), while all later
* devices use the SoundGraph vendor ID (0x15c2).
*/
static struct usb_device_id imon_usb_id_table[] = {
/* TriGem iMON (IR only) -- TG_iMON.inf */
{ USB_DEVICE(0x0aa8, 0x8001) },
/* SoundGraph iMON (IR only) -- sg_imon.inf */
{ USB_DEVICE(0x04e8, 0xff30) },
/* SoundGraph iMON VFD (IR & VFD) -- iMON_VFD.inf */
{ USB_DEVICE(0x0aa8, 0xffda) },
/* SoundGraph iMON SS (IR & VFD) -- iMON_SS.inf */
{ USB_DEVICE(0x15c2, 0xffda) },
{}
};
/* Some iMON VFD models requires a 6th packet for VFD writes */
static struct usb_device_id vfd_proto_6p_list[] = {
{ USB_DEVICE(0x15c2, 0xffda) },
{}
};
/* Some iMON devices have no lcd/vfd, don't set one up */
static struct usb_device_id ir_only_list[] = {
{ USB_DEVICE(0x0aa8, 0x8001) },
{ USB_DEVICE(0x04e8, 0xff30) },
{}
};
/* USB Device data */
static struct usb_driver imon_driver = {
.name = MOD_NAME,
.probe = imon_probe,
.disconnect = imon_disconnect,
.suspend = imon_suspend,
.resume = imon_resume,
.id_table = imon_usb_id_table,
};
static struct usb_class_driver imon_class = {
.name = DEVICE_NAME,
.fops = &display_fops,
.minor_base = DISPLAY_MINOR_BASE,
};
/* to prevent races between open() and disconnect(), probing, etc */
static DEFINE_MUTEX(driver_lock);
static int debug;
/*** M O D U L E C O D E ***/
MODULE_AUTHOR(MOD_AUTHOR);
MODULE_DESCRIPTION(MOD_DESC);
MODULE_VERSION(MOD_VERSION);
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(usb, imon_usb_id_table);
module_param(debug, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug messages: 0=no, 1=yes(default: no)");
static void free_imon_context(struct imon_context *context)
{
struct device *dev = context->driver->dev;
usb_free_urb(context->tx_urb);
usb_free_urb(context->rx_urb);
lirc_buffer_free(context->driver->rbuf);
kfree(context->driver->rbuf);
kfree(context->driver);
kfree(context);
dev_dbg(dev, "%s: iMON context freed\n", __func__);
}
static void deregister_from_lirc(struct imon_context *context)
{
int retval;
int minor = context->driver->minor;
retval = lirc_unregister_driver(minor);
if (retval)
dev_err(&context->usbdev->dev,
"unable to deregister from lirc(%d)", retval);
else
dev_info(&context->usbdev->dev,
"Deregistered iMON driver (minor:%d)\n", minor);
}
/**
* Called when the Display device (e.g. /dev/lcd0)
* is opened by the application.
*/
static int display_open(struct inode *inode, struct file *file)
{
struct usb_interface *interface;
struct imon_context *context = NULL;
int subminor;
int retval = 0;
/* prevent races with disconnect */
mutex_lock(&driver_lock);
subminor = iminor(inode);
interface = usb_find_interface(&imon_driver, subminor);
if (!interface) {
pr_err("%s: could not find interface for minor %d\n",
__func__, subminor);
retval = -ENODEV;
goto exit;
}
context = usb_get_intfdata(interface);
if (!context) {
dev_err(&interface->dev, "no context found for minor %d\n",
subminor);
retval = -ENODEV;
goto exit;
}
mutex_lock(&context->ctx_lock);
if (!context->display) {
dev_err(&interface->dev,
"%s: display not supported by device\n", __func__);
retval = -ENODEV;
} else if (context->display_isopen) {
dev_err(&interface->dev,
"%s: display port is already open\n", __func__);
retval = -EBUSY;
} else {
context->display_isopen = 1;
file->private_data = context;
dev_info(context->driver->dev, "display port opened\n");
}
mutex_unlock(&context->ctx_lock);
exit:
mutex_unlock(&driver_lock);
return retval;
}
/**
* Called when the display device (e.g. /dev/lcd0)
* is closed by the application.
*/
static int display_close(struct inode *inode, struct file *file)
{
struct imon_context *context = NULL;
int retval = 0;
context = file->private_data;
if (!context) {
pr_err("%s: no context for device\n", __func__);
return -ENODEV;
}
mutex_lock(&context->ctx_lock);
if (!context->display) {
dev_err(&context->usbdev->dev,
"%s: display not supported by device\n", __func__);
retval = -ENODEV;
} else if (!context->display_isopen) {
dev_err(&context->usbdev->dev,
"%s: display is not open\n", __func__);
retval = -EIO;
} else {
context->display_isopen = 0;
dev_info(context->driver->dev, "display port closed\n");
if (!context->dev_present && !context->ir_isopen) {
/*
* Device disconnected before close and IR port is not
* open. If IR port is open, context will be deleted by
* ir_close.
*/
mutex_unlock(&context->ctx_lock);
free_imon_context(context);
return retval;
}
}
mutex_unlock(&context->ctx_lock);
return retval;
}
/**
* Sends a packet to the device -- this function must be called
* with context->ctx_lock held.
*/
static int send_packet(struct imon_context *context)
{
unsigned int pipe;
int interval = 0;
int retval = 0;
/* Check if we need to use control or interrupt urb */
pipe = usb_sndintpipe(context->usbdev,
context->tx_endpoint->bEndpointAddress);
interval = context->tx_endpoint->bInterval;
usb_fill_int_urb(context->tx_urb, context->usbdev, pipe,
context->usb_tx_buf,
sizeof(context->usb_tx_buf),
usb_tx_callback, context, interval);
context->tx_urb->actual_length = 0;
reinit_completion(&context->tx.finished);
atomic_set(&context->tx.busy, 1);
retval = usb_submit_urb(context->tx_urb, GFP_KERNEL);
if (retval) {
atomic_set(&context->tx.busy, 0);
dev_err(&context->usbdev->dev, "error submitting urb(%d)\n",
retval);
} else {
/* Wait for transmission to complete (or abort) */
mutex_unlock(&context->ctx_lock);
retval = wait_for_completion_interruptible(
&context->tx.finished);
if (retval)
dev_err(&context->usbdev->dev,
"%s: task interrupted\n", __func__);
mutex_lock(&context->ctx_lock);
retval = context->tx.status;
if (retval)
dev_err(&context->usbdev->dev,
"packet tx failed (%d)\n", retval);
}
return retval;
}
/**
* Writes data to the VFD. The iMON VFD is 2x16 characters
* and requires data in 5 consecutive USB interrupt packets,
* each packet but the last carrying 7 bytes.
*
* I don't know if the VFD board supports features such as
* scrolling, clearing rows, blanking, etc. so at
* the caller must provide a full screen of data. If fewer
* than 32 bytes are provided spaces will be appended to
* generate a full screen.
*/
static ssize_t vfd_write(struct file *file, const char __user *buf,
size_t n_bytes, loff_t *pos)
{
int i;
int offset;
int seq;
int retval = 0;
struct imon_context *context;
const unsigned char vfd_packet6[] = {
0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
int *data_buf = NULL;
context = file->private_data;
if (!context) {
pr_err("%s: no context for device\n", __func__);
return -ENODEV;
}
mutex_lock(&context->ctx_lock);
if (!context->dev_present) {
dev_err(&context->usbdev->dev,
"%s: no iMON device present\n", __func__);
retval = -ENODEV;
goto exit;
}
if (n_bytes <= 0 || n_bytes > IMON_DATA_BUF_SZ - 3) {
dev_err(&context->usbdev->dev,
"%s: invalid payload size\n", __func__);
retval = -EINVAL;
goto exit;
}
data_buf = memdup_user(buf, n_bytes);
if (IS_ERR(data_buf)) {
mutex_unlock(&context->ctx_lock);
return PTR_ERR(data_buf);
}
memcpy(context->tx.data_buf, data_buf, n_bytes);
/* Pad with spaces */
for (i = n_bytes; i < IMON_DATA_BUF_SZ - 3; ++i)
context->tx.data_buf[i] = ' ';
for (i = IMON_DATA_BUF_SZ - 3; i < IMON_DATA_BUF_SZ; ++i)
context->tx.data_buf[i] = 0xFF;
offset = 0;
seq = 0;
do {
memcpy(context->usb_tx_buf, context->tx.data_buf + offset, 7);
context->usb_tx_buf[7] = (unsigned char)seq;
retval = send_packet(context);
if (retval) {
dev_err(&context->usbdev->dev,
"send packet failed for packet #%d\n",
seq / 2);
goto exit;
} else {
seq += 2;
offset += 7;
}
} while (offset < IMON_DATA_BUF_SZ);
if (context->vfd_proto_6p) {
/* Send packet #6 */
memcpy(context->usb_tx_buf, &vfd_packet6, sizeof(vfd_packet6));
context->usb_tx_buf[7] = (unsigned char)seq;
retval = send_packet(context);
if (retval)
dev_err(&context->usbdev->dev,
"send packet failed for packet #%d\n",
seq / 2);
}
exit:
mutex_unlock(&context->ctx_lock);
kfree(data_buf);
return (!retval) ? n_bytes : retval;
}
/**
* Callback function for USB core API: transmit data
*/
static void usb_tx_callback(struct urb *urb)
{
struct imon_context *context;
if (!urb)
return;
context = (struct imon_context *)urb->context;
if (!context)
return;
context->tx.status = urb->status;
/* notify waiters that write has finished */
atomic_set(&context->tx.busy, 0);
complete(&context->tx.finished);
}
/**
* Called by lirc_dev when the application opens /dev/lirc
*/
static int ir_open(void *data)
{
struct imon_context *context;
/* prevent races with disconnect */
mutex_lock(&driver_lock);
context = data;
/* initial IR protocol decode variables */
context->rx.count = 0;
context->rx.initial_space = 1;
context->rx.prev_bit = 0;
init_completion(&context->tx.finished);
context->ir_isopen = 1;
dev_info(context->driver->dev, "IR port opened\n");
mutex_unlock(&driver_lock);
return 0;
}
/**
* Called by lirc_dev when the application closes /dev/lirc
*/
static void ir_close(void *data)
{
struct imon_context *context;
context = data;
if (!context) {
pr_err("%s: no context for device\n", __func__);
return;
}
mutex_lock(&context->ctx_lock);
context->ir_isopen = 0;
dev_info(context->driver->dev, "IR port closed\n");
if (!context->dev_present) {
/*
* Device disconnected while IR port was still open. Driver
* was not deregistered at disconnect time, so do it now.
*/
deregister_from_lirc(context);
if (!context->display_isopen) {
mutex_unlock(&context->ctx_lock);
free_imon_context(context);
return;
}
/*
* If display port is open, context will be deleted by
* display_close
*/
}
mutex_unlock(&context->ctx_lock);
}
/**
* Convert bit count to time duration (in us) and submit
* the value to lirc_dev.
*/
static void submit_data(struct imon_context *context)
{
unsigned char buf[4];
int value = context->rx.count;
int i;
dev_dbg(context->driver->dev, "submitting data to LIRC\n");
value *= BIT_DURATION;
value &= PULSE_MASK;
if (context->rx.prev_bit)
value |= PULSE_BIT;
for (i = 0; i < 4; ++i)
buf[i] = value >> (i * 8);
lirc_buffer_write(context->driver->rbuf, buf);
wake_up(&context->driver->rbuf->wait_poll);
}
/**
* Process the incoming packet
*/
static void imon_incoming_packet(struct imon_context *context,
struct urb *urb, int intf)
{
int len = urb->actual_length;
unsigned char *buf = urb->transfer_buffer;
struct device *dev = context->driver->dev;
int octet, bit;
unsigned char mask;
/*
* just bail out if no listening IR client
*/
if (!context->ir_isopen)
return;
if (len != 8) {
dev_warn(dev, "imon %s: invalid incoming packet size (len = %d, intf%d)\n",
__func__, len, intf);
return;
}
if (debug)
dev_info(dev, "raw packet: %*ph\n", len, buf);
/*
* Translate received data to pulse and space lengths.
* Received data is active low, i.e. pulses are 0 and
* spaces are 1.
*
* My original algorithm was essentially similar to
* Changwoo Ryu's with the exception that he switched
* the incoming bits to active high and also fed an
* initial space to LIRC at the start of a new sequence
* if the previous bit was a pulse.
*
* I've decided to adopt his algorithm.
*/
if (buf[7] == 1 && context->rx.initial_space) {
/* LIRC requires a leading space */
context->rx.prev_bit = 0;
context->rx.count = 4;
submit_data(context);
context->rx.count = 0;
}
for (octet = 0; octet < 5; ++octet) {
mask = 0x80;
for (bit = 0; bit < 8; ++bit) {
int curr_bit = !(buf[octet] & mask);
if (curr_bit != context->rx.prev_bit) {
if (context->rx.count) {
submit_data(context);
context->rx.count = 0;
}
context->rx.prev_bit = curr_bit;
}
++context->rx.count;
mask >>= 1;
}
}
if (buf[7] == 10) {
if (context->rx.count) {
submit_data(context);
context->rx.count = 0;
}
context->rx.initial_space = context->rx.prev_bit;
}
}
/**
* Callback function for USB core API: receive data
*/
static void usb_rx_callback(struct urb *urb)
{
struct imon_context *context;
int intfnum = 0;
if (!urb)
return;
context = (struct imon_context *)urb->context;
if (!context)
return;
switch (urb->status) {
case -ENOENT: /* usbcore unlink successful! */
return;
case 0:
imon_incoming_packet(context, urb, intfnum);
break;
default:
dev_warn(context->driver->dev, "imon %s: status(%d): ignored\n",
__func__, urb->status);
break;
}
usb_submit_urb(context->rx_urb, GFP_ATOMIC);
}
/**
* Callback function for USB core API: Probe
*/
static int imon_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
struct usb_device *usbdev = NULL;
struct usb_host_interface *iface_desc = NULL;
struct usb_endpoint_descriptor *rx_endpoint = NULL;
struct usb_endpoint_descriptor *tx_endpoint = NULL;
struct urb *rx_urb = NULL;
struct urb *tx_urb = NULL;
struct lirc_driver *driver = NULL;
struct lirc_buffer *rbuf = NULL;
struct device *dev = &interface->dev;
int ifnum;
int lirc_minor = 0;
int num_endpts;
int retval = -ENOMEM;
int display_ep_found = 0;
int ir_ep_found = 0;
int vfd_proto_6p = 0;
struct imon_context *context = NULL;
int i;
u16 vendor, product;
/* prevent races probing devices w/multiple interfaces */
mutex_lock(&driver_lock);
context = kzalloc(sizeof(*context), GFP_KERNEL);
if (!context)
goto driver_unlock;
/*
* Try to auto-detect the type of display if the user hasn't set
* it by hand via the display_type modparam. Default is VFD.
*/
if (usb_match_id(interface, ir_only_list))
context->display = 0;
else
context->display = 1;
usbdev = usb_get_dev(interface_to_usbdev(interface));
iface_desc = interface->cur_altsetting;
num_endpts = iface_desc->desc.bNumEndpoints;
ifnum = iface_desc->desc.bInterfaceNumber;
vendor = le16_to_cpu(usbdev->descriptor.idVendor);
product = le16_to_cpu(usbdev->descriptor.idProduct);
dev_dbg(dev, "%s: found iMON device (%04x:%04x, intf%d)\n",
__func__, vendor, product, ifnum);
/*
* Scan the endpoint list and set:
* first input endpoint = IR endpoint
* first output endpoint = display endpoint
*/
for (i = 0; i < num_endpts && !(ir_ep_found && display_ep_found); ++i) {
struct usb_endpoint_descriptor *ep;
int ep_dir;
int ep_type;
ep = &iface_desc->endpoint[i].desc;
ep_dir = ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK;
ep_type = usb_endpoint_type(ep);
if (!ir_ep_found &&
ep_dir == USB_DIR_IN &&
ep_type == USB_ENDPOINT_XFER_INT) {
rx_endpoint = ep;
ir_ep_found = 1;
dev_dbg(dev, "%s: found IR endpoint\n", __func__);
} else if (!display_ep_found && ep_dir == USB_DIR_OUT &&
ep_type == USB_ENDPOINT_XFER_INT) {
tx_endpoint = ep;
display_ep_found = 1;
dev_dbg(dev, "%s: found display endpoint\n", __func__);
}
}
/*
* Some iMON receivers have no display. Unfortunately, it seems
* that SoundGraph recycles device IDs between devices both with
* and without... :\
*/
if (context->display == 0) {
display_ep_found = 0;
dev_dbg(dev, "%s: device has no display\n", __func__);
}
/* Input endpoint is mandatory */
if (!ir_ep_found) {
dev_err(dev, "%s: no valid input (IR) endpoint found.\n",
__func__);
retval = -ENODEV;
goto free_context;
}
/* Determine if display requires 6 packets */
if (display_ep_found) {
if (usb_match_id(interface, vfd_proto_6p_list))
vfd_proto_6p = 1;
dev_dbg(dev, "%s: vfd_proto_6p: %d\n",
__func__, vfd_proto_6p);
}
driver = kzalloc(sizeof(*driver), GFP_KERNEL);
if (!driver)
goto free_context;
rbuf = kmalloc(sizeof(*rbuf), GFP_KERNEL);
if (!rbuf)
goto free_driver;
if (lirc_buffer_init(rbuf, BUF_CHUNK_SIZE, BUF_SIZE)) {
dev_err(dev, "%s: lirc_buffer_init failed\n", __func__);
goto free_rbuf;
}
rx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!rx_urb)
goto free_lirc_buf;
tx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!tx_urb)
goto free_rx_urb;
mutex_init(&context->ctx_lock);
context->vfd_proto_6p = vfd_proto_6p;
strcpy(driver->name, MOD_NAME);
driver->minor = -1;
driver->code_length = BUF_CHUNK_SIZE * 8;
driver->sample_rate = 0;
driver->features = LIRC_CAN_REC_MODE2;
driver->data = context;
driver->rbuf = rbuf;
driver->set_use_inc = ir_open;
driver->set_use_dec = ir_close;
driver->dev = &interface->dev;
driver->owner = THIS_MODULE;
mutex_lock(&context->ctx_lock);
context->driver = driver;
/* start out in keyboard mode */
lirc_minor = lirc_register_driver(driver);
if (lirc_minor < 0) {
dev_err(dev, "%s: lirc_register_driver failed\n", __func__);
goto free_tx_urb;
}
dev_info(dev, "Registered iMON driver (lirc minor: %d)\n",
lirc_minor);
/* Needed while unregistering! */
driver->minor = lirc_minor;
context->usbdev = usbdev;
context->dev_present = 1;
context->rx_endpoint = rx_endpoint;
context->rx_urb = rx_urb;
/*
* tx is used to send characters to lcd/vfd, associate RF
* remotes, set IR protocol, and maybe more...
*/
context->tx_endpoint = tx_endpoint;
context->tx_urb = tx_urb;
if (display_ep_found)
context->display = 1;
usb_fill_int_urb(context->rx_urb, context->usbdev,
usb_rcvintpipe(context->usbdev,
context->rx_endpoint->bEndpointAddress),
context->usb_rx_buf, sizeof(context->usb_rx_buf),
usb_rx_callback, context,
context->rx_endpoint->bInterval);
retval = usb_submit_urb(context->rx_urb, GFP_KERNEL);
if (retval) {
dev_err(dev, "usb_submit_urb failed for intf0 (%d)\n", retval);
goto unregister_lirc;
}
usb_set_intfdata(interface, context);
if (context->display && ifnum == 0) {
dev_dbg(dev, "%s: Registering iMON display with sysfs\n",
__func__);
if (usb_register_dev(interface, &imon_class)) {
/* Not a fatal error, so ignore */
dev_info(dev, "%s: could not get a minor number for display\n",
__func__);
}
}
dev_info(dev, "iMON device (%04x:%04x, intf%d) on usb<%d:%d> initialized\n",
vendor, product, ifnum, usbdev->bus->busnum, usbdev->devnum);
/* Everything went fine. Just unlock and return retval (with is 0) */
mutex_unlock(&context->ctx_lock);
goto driver_unlock;
unregister_lirc:
lirc_unregister_driver(driver->minor);
free_tx_urb:
mutex_unlock(&context->ctx_lock);
usb_free_urb(tx_urb);
free_rx_urb:
usb_free_urb(rx_urb);
free_lirc_buf:
lirc_buffer_free(rbuf);
free_rbuf:
kfree(rbuf);
free_driver:
kfree(driver);
free_context:
kfree(context);
context = NULL;
driver_unlock:
mutex_unlock(&driver_lock);
return retval;
}
/**
* Callback function for USB core API: disconnect
*/
static void imon_disconnect(struct usb_interface *interface)
{
struct imon_context *context;
int ifnum;
/* prevent races with ir_open()/display_open() */
mutex_lock(&driver_lock);
context = usb_get_intfdata(interface);
ifnum = interface->cur_altsetting->desc.bInterfaceNumber;
mutex_lock(&context->ctx_lock);
usb_set_intfdata(interface, NULL);
/* Abort ongoing write */
if (atomic_read(&context->tx.busy)) {
usb_kill_urb(context->tx_urb);
complete(&context->tx.finished);
}
context->dev_present = 0;
usb_kill_urb(context->rx_urb);
if (context->display)
usb_deregister_dev(interface, &imon_class);
if (!context->ir_isopen && !context->dev_present) {
deregister_from_lirc(context);
mutex_unlock(&context->ctx_lock);
if (!context->display_isopen)
free_imon_context(context);
} else
mutex_unlock(&context->ctx_lock);
mutex_unlock(&driver_lock);
dev_info(&interface->dev, "%s: iMON device (intf%d) disconnected\n",
__func__, ifnum);
}
static int imon_suspend(struct usb_interface *intf, pm_message_t message)
{
struct imon_context *context = usb_get_intfdata(intf);
usb_kill_urb(context->rx_urb);
return 0;
}
static int imon_resume(struct usb_interface *intf)
{
struct imon_context *context = usb_get_intfdata(intf);
usb_fill_int_urb(context->rx_urb, context->usbdev,
usb_rcvintpipe(context->usbdev,
context->rx_endpoint->bEndpointAddress),
context->usb_rx_buf, sizeof(context->usb_rx_buf),
usb_rx_callback, context,
context->rx_endpoint->bInterval);
return usb_submit_urb(context->rx_urb, GFP_ATOMIC);
}
module_usb_driver(imon_driver);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment