Commit f466722c authored by NeilBrown's avatar NeilBrown

md: Change handling of save_raid_disk and metadata update during recovery.

Since commit d70ed2e4
   MD: Allow restarting an interrupted incremental recovery.

we don't write out the metadata to devices while they are recovering.
This had a good reason, but has unfortunate consequences.  This patch
changes things to make them work better.

At issue is what happens if the array is shut down while a recovery is
happening, particularly a bitmap-guided recovery.
Ideally the recovery should pick up where it left off.
However the metadata cannot represent the state "A recovery is in
process which is guided by the bitmap".

Before the above mentioned commit, we wrote metadata to the device
which said "this is being recovered and it is up to <here>".  So after
a restart, a full recovery (not bitmap-guided) would happen from
where-ever it was up to.

After the commit the metadata wasn't updated so it still said "This
device is fully in sync with <this> event count".  That leads to a
bitmap-based recovery following the whole bitmap, which should be a
lot less work than a full recovery from some starting point.  So this
was an improvement.

However updates some metadata but not all leads to other problems.
In particular, the metadata written to the fully-up-to-date device
record that the array has all devices present (even though some are
recovering).  So on restart, mdadm wants to find all devices and
expects them to have current event counts.
Obviously it doesn't (some have old event counts) so (when assembling
with --incremental) it waits indefinitely for the rest of the expected
devices.

It really is wrong to not update all the metadata together.  Do that
is bound to cause confusion.
Instead, we should make it possible to record the truth in the
metadata.  i.e. we need to be able to record that a device is being
recovered based on the bitmap.
We already have a Feature flag to say that recovery is happening.  We
now add another one to say that it is a bitmap-based recovery.

With this we can remove the code that disables the write-out of
metadata on some devices.

So this patch:
 - moves the setting of 'saved_raid_disk' from add_new_disk to
   the validate_super methods.  This makes sure it is always set
   properly, both when adding a new device to an array, and when
   assembling an array from a collection of devices.
 - Adds a metadata flag MD_FEATURE_RECOVERY_BITMAP which is only
   used if MD_FEATURE_RECOVERY_OFFSET is set, and record that a
   bitmap-based recovery is allowed.
   This is only present in v1.x metadata. v0.90 doesn't support
   devices which are in the middle of recovery at all.
 - Only skips writing metadata to Faulty devices.

 - Also allows rdev state to be set to "-insync" via sysfs.
   This can be used for external-metadata arrays.  When the
   'role' is set the device is assumed to be in-sync.  If, after
   setting the role, we set the state to "-insync", the role is
   moved to saved_raid_disk which effectively says the device is
   partly in-sync with that slot and needs a bitmap recovery.

Cc: Andrei Warkentin <andreiw@vmware.com>
Signed-off-by: default avatarNeilBrown <neilb@suse.de>
parent 8313b8e5
......@@ -1183,6 +1183,7 @@ static int super_90_validate(struct mddev *mddev, struct md_rdev *rdev)
desc->raid_disk < mddev->raid_disks */) {
set_bit(In_sync, &rdev->flags);
rdev->raid_disk = desc->raid_disk;
rdev->saved_raid_disk = desc->raid_disk;
} else if (desc->state & (1<<MD_DISK_ACTIVE)) {
/* active but not in sync implies recovery up to
* reshape position. We don't know exactly where
......@@ -1681,10 +1682,14 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev)
set_bit(Faulty, &rdev->flags);
break;
default:
rdev->saved_raid_disk = role;
if ((le32_to_cpu(sb->feature_map) &
MD_FEATURE_RECOVERY_OFFSET))
MD_FEATURE_RECOVERY_OFFSET)) {
rdev->recovery_offset = le64_to_cpu(sb->recovery_offset);
else
if (!(le32_to_cpu(sb->feature_map) &
MD_FEATURE_RECOVERY_BITMAP))
rdev->saved_raid_disk = -1;
} else
set_bit(In_sync, &rdev->flags);
rdev->raid_disk = role;
break;
......@@ -1746,6 +1751,9 @@ static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev)
cpu_to_le32(MD_FEATURE_RECOVERY_OFFSET);
sb->recovery_offset =
cpu_to_le64(rdev->recovery_offset);
if (rdev->saved_raid_disk >= 0 && mddev->bitmap)
sb->feature_map |=
cpu_to_le32(MD_FEATURE_RECOVERY_BITMAP);
}
if (test_bit(Replacement, &rdev->flags))
sb->feature_map |=
......@@ -2487,8 +2495,7 @@ static void md_update_sb(struct mddev * mddev, int force_change)
if (rdev->sb_loaded != 1)
continue; /* no noise on spare devices */
if (!test_bit(Faulty, &rdev->flags) &&
rdev->saved_raid_disk == -1) {
if (!test_bit(Faulty, &rdev->flags)) {
md_super_write(mddev,rdev,
rdev->sb_start, rdev->sb_size,
rdev->sb_page);
......@@ -2504,11 +2511,9 @@ static void md_update_sb(struct mddev * mddev, int force_change)
rdev->badblocks.size = 0;
}
} else if (test_bit(Faulty, &rdev->flags))
} else
pr_debug("md: %s (skipping faulty)\n",
bdevname(rdev->bdev, b));
else
pr_debug("(skipping incremental s/r ");
if (mddev->level == LEVEL_MULTIPATH)
/* only need to write one superblock... */
......@@ -2624,6 +2629,8 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len)
* blocked - sets the Blocked flags
* -blocked - clears the Blocked and possibly simulates an error
* insync - sets Insync providing device isn't active
* -insync - clear Insync for a device with a slot assigned,
* so that it gets rebuilt based on bitmap
* write_error - sets WriteErrorSeen
* -write_error - clears WriteErrorSeen
*/
......@@ -2672,6 +2679,11 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len)
} else if (cmd_match(buf, "insync") && rdev->raid_disk == -1) {
set_bit(In_sync, &rdev->flags);
err = 0;
} else if (cmd_match(buf, "-insync") && rdev->raid_disk >= 0) {
clear_bit(In_sync, &rdev->flags);
rdev->saved_raid_disk = rdev->raid_disk;
rdev->raid_disk = -1;
err = 0;
} else if (cmd_match(buf, "write_error")) {
set_bit(WriteErrorSeen, &rdev->flags);
err = 0;
......@@ -5780,6 +5792,7 @@ static int add_new_disk(struct mddev * mddev, mdu_disk_info_t *info)
clear_bit(Bitmap_sync, &rdev->flags);
} else
rdev->raid_disk = -1;
rdev->saved_raid_disk = rdev->raid_disk;
} else
super_types[mddev->major_version].
validate_super(mddev, rdev);
......@@ -5792,11 +5805,6 @@ static int add_new_disk(struct mddev * mddev, mdu_disk_info_t *info)
return -EINVAL;
}
if (test_bit(In_sync, &rdev->flags))
rdev->saved_raid_disk = rdev->raid_disk;
else
rdev->saved_raid_disk = -1;
clear_bit(In_sync, &rdev->flags); /* just to be sure */
if (info->state & (1<<MD_DISK_WRITEMOSTLY))
set_bit(WriteMostly, &rdev->flags);
......@@ -7948,14 +7956,10 @@ void md_reap_sync_thread(struct mddev *mddev)
mddev->pers->finish_reshape(mddev);
/* If array is no-longer degraded, then any saved_raid_disk
* information must be scrapped. Also if any device is now
* In_sync we must scrape the saved_raid_disk for that device
* do the superblock for an incrementally recovered device
* written out.
* information must be scrapped.
*/
rdev_for_each(rdev, mddev)
if (!mddev->degraded ||
test_bit(In_sync, &rdev->flags))
if (!mddev->degraded)
rdev_for_each(rdev, mddev)
rdev->saved_raid_disk = -1;
md_update_sb(mddev, 1);
......
......@@ -292,6 +292,9 @@ struct mdp_superblock_1 {
* backwards anyway.
*/
#define MD_FEATURE_NEW_OFFSET 64 /* new_offset must be honoured */
#define MD_FEATURE_RECOVERY_BITMAP 128 /* recovery that is happening
* is guided by bitmap.
*/
#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \
|MD_FEATURE_RECOVERY_OFFSET \
|MD_FEATURE_RESHAPE_ACTIVE \
......@@ -299,6 +302,7 @@ struct mdp_superblock_1 {
|MD_FEATURE_REPLACEMENT \
|MD_FEATURE_RESHAPE_BACKWARDS \
|MD_FEATURE_NEW_OFFSET \
|MD_FEATURE_RECOVERY_BITMAP \
)
#endif
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment