rt2800: change initialization sequence to fix system freeze

My commit

commit c630ccf1
Author: Stanislaw Gruszka <stf_xl@wp.pl>
Date:   Sat Mar 16 19:19:46 2013 +0100

    rt2800: rearrange bbp/rfcsr initialization

make Maxim machine freeze when try to start wireless device.

Initialization order and sending MCU_BOOT_SIGNAL request, changed in
above commit, is important. Doing things incorrectly make PCIe bus
problems, which can froze the machine.

This patch change initialization sequence like vendor driver do:
function NICInitializeAsic() from
2011_1007_RT5390_RT5392_Linux_STA_V2.5.0.3_DPO (PCI devices) and
DPO_RT5572_LinuxSTA_2.6.1.3_20121022 (according Mediatek, latest driver
for RT8070/RT3070/RT3370/RT3572/RT5370/RT5372/RT5572 USB devices).
It fixes freezes on Maxim system.

Resolve:
https://bugzilla.redhat.com/show_bug.cgi?id=1000679Reported-and-tested-by: Maxim Polyakov <polyakov@dexmalabs.com>
Bisected-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2800lib.c

@@ -6659,19 +6659,20 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev)
 		     rt2800_init_registers(rt2x00dev)))
 		return -EIO;
 
+	if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev)))
+		return -EIO;
+
 	/*
 	 * Send signal to firmware during boot time.
 	 */
 	rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
 	rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
-	if (rt2x00_is_usb(rt2x00dev)) {
+	if (rt2x00_is_usb(rt2x00dev))
 		rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
 	rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
-	}
 	msleep(1);
 
-	if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev) ||
-		     rt2800_wait_bbp_ready(rt2x00dev)))
+	if (unlikely(rt2800_wait_bbp_ready(rt2x00dev)))
 		return -EIO;
 
 	rt2800_init_bbp(rt2x00dev);