Commit f4f1269c authored by Kumar Gala's avatar Kumar Gala Committed by Linus Torvalds

[PATCH] ppc32: Remove board support for ASH

Support for the ASH board is no longer maintained and thus being removed
Signed-off-by: default avatarKumar Gala <kumar.gala@freescale.com>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent a3800d8f
......@@ -784,7 +784,7 @@ embed_config(bd_t ** bdp)
#ifdef CONFIG_IBM_OPENBIOS
/* This could possibly work for all treeboot roms.
*/
#if defined(CONFIG_ASH) || defined(CONFIG_BEECH) || defined(CONFIG_BUBINGA)
#if defined(CONFIG_BEECH) || defined(CONFIG_BUBINGA)
#define BOARD_INFO_VECTOR 0xFFF80B50 /* openbios 1.19 moved this vector down - armin */
#else
#define BOARD_INFO_VECTOR 0xFFFE0B50
......
#
# Automatically generated make config: don't edit
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_GENERIC_NVRAM=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Processor
#
# CONFIG_6xx is not set
CONFIG_40x=y
# CONFIG_44x is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
# CONFIG_8xx is not set
# CONFIG_MATH_EMULATION is not set
# CONFIG_CPU_FREQ is not set
CONFIG_4xx=y
#
# IBM 4xx options
#
CONFIG_ASH=y
# CONFIG_CPCI405 is not set
# CONFIG_EP405 is not set
# CONFIG_EVB405EP is not set
# CONFIG_OAK is not set
# CONFIG_REDWOOD_5 is not set
# CONFIG_REDWOOD_6 is not set
# CONFIG_SYCAMORE is not set
# CONFIG_WALNUT is not set
CONFIG_NP405H=y
CONFIG_IBM405_ERR77=y
CONFIG_IBM405_ERR51=y
CONFIG_IBM_OCP=y
CONFIG_PPC_OCP=y
CONFIG_IBM_OPENBIOS=y
# CONFIG_PM is not set
CONFIG_UART0_TTYS0=y
# CONFIG_UART0_TTYS1 is not set
CONFIG_NOT_COHERENT_CACHE=y
#
# Platform options
#
# CONFIG_PC_KEYBOARD is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_HIGHMEM is not set
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="ip=on"
#
# Bus options
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_NAMES is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00400000
#
# Device Drivers
#
#
# Generic Driver Options
#
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_CARMEL is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
CONFIG_IBM_EMAC=y
# CONFIG_IBM_EMAC_ERRMSG is not set
CONFIG_IBM_EMAC_RXB=64
CONFIG_IBM_EMAC_TXB=8
CONFIG_IBM_EMAC_FGAP=8
CONFIG_IBM_EMAC_SKBRES=0
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set
#
# I2C Algorithms
#
# CONFIG_I2C_ALGOBIT is not set
# CONFIG_I2C_ALGOPCF is not set
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_IBM_IIC is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_NEC98_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
#
# Native Language Support
#
# CONFIG_NLS is not set
#
# IBM 40x options
#
#
# Library routines
#
CONFIG_CRC32=y
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SERIAL_TEXT_DEBUG is not set
CONFIG_OCP=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
......@@ -16,11 +16,6 @@ choice
depends on 40x
default WALNUT
config ASH
bool "Ash"
help
This option enables support for the IBM NP405H evaluation board.
config BUBINGA
bool "Bubinga"
select WANT_EARLY_SERIAL
......
#
# Makefile for the PowerPC 4xx linux kernel.
obj-$(CONFIG_ASH) += ash.o
obj-$(CONFIG_BAMBOO) += bamboo.o
obj-$(CONFIG_CPCI405) += cpci405.o
obj-$(CONFIG_EBONY) += ebony.o
......
/*
* arch/ppc/platforms/4xx/ash.c
*
* Support for the IBM NP405H ash eval board
*
* Author: Armin Kuster <akuster@mvista.com>
*
* 2001-2002 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/pagemap.h>
#include <linux/pci.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/io.h>
#include <asm/ocp.h>
#include <asm/ibm_ocp_pci.h>
#include <asm/todc.h>
#ifdef DEBUG
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
void *ash_rtc_base;
/* Some IRQs unique to Walnut.
* Used by the generic 405 PCI setup functions in ppc4xx_pci.c
*/
int __init
ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{24, 24, 24, 24}, /* IDSEL 1 - PCI slot 1 */
{25, 25, 25, 25}, /* IDSEL 2 - PCI slot 2 */
{26, 26, 26, 26}, /* IDSEL 3 - PCI slot 3 */
{27, 27, 27, 27}, /* IDSEL 4 - PCI slot 4 */
};
const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
void __init
ash_setup_arch(void)
{
ppc4xx_setup_arch();
ibm_ocp_set_emac(0, 3);
#ifdef CONFIG_DEBUG_BRINGUP
int i;
printk("\n");
printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
printk("\n");
printk("bi_s_version\t %s\n", bip->bi_s_version);
printk("bi_r_version\t %s\n", bip->bi_r_version);
printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,
bip->bi_memsize / (1024 * 1000));
for (i = 0; i < EMAC_NUMS; i++) {
printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", i,
bip->bi_enetaddr[i][0], bip->bi_enetaddr[i][1],
bip->bi_enetaddr[i][2], bip->bi_enetaddr[i][3],
bip->bi_enetaddr[i][4], bip->bi_enetaddr[i][5]);
}
printk("bi_pci_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
bip->bi_pci_enetaddr[0], bip->bi_pci_enetaddr[1],
bip->bi_pci_enetaddr[2], bip->bi_pci_enetaddr[3],
bip->bi_pci_enetaddr[4], bip->bi_pci_enetaddr[5]);
printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
bip->bi_intfreq, bip->bi_intfreq / 1000000);
printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
bip->bi_busfreq, bip->bi_busfreq / 1000000);
printk("bi_pci_busfreq\t 0x%8.8x\t pci bus clock:\t %dMHz\n",
bip->bi_pci_busfreq, bip->bi_pci_busfreq / 1000000);
printk("\n");
#endif
/* RTC step for ash */
ash_rtc_base = (void *) ASH_RTC_VADDR;
TODC_INIT(TODC_TYPE_DS1743, ash_rtc_base, ash_rtc_base, ash_rtc_base,
8);
}
void __init
bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
{
/*
* Expected PCI mapping:
*
* PLB addr PCI memory addr
* --------------------- ---------------------
* 0000'0000 - 7fff'ffff <--- 0000'0000 - 7fff'ffff
* 8000'0000 - Bfff'ffff ---> 8000'0000 - Bfff'ffff
*
* PLB addr PCI io addr
* --------------------- ---------------------
* e800'0000 - e800'ffff ---> 0000'0000 - 0001'0000
*
* The following code is simplified by assuming that the bootrom
* has been well behaved in following this mapping.
*/
#ifdef DEBUG
int i;
printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
printk("PCI bridge regs before fixup \n");
for (i = 0; i <= 2; i++) {
printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
printk(" pmm%dpcila\t0x%x\n", i,
in_le32(&(pcip->pmm[i].pcila)));
printk(" pmm%dpciha\t0x%x\n", i,
in_le32(&(pcip->pmm[i].pciha)));
}
printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
early_read_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno), bar,
&bar_response);
DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
hose->first_busno, PCI_SLOT(hose->first_busno),
PCI_FUNC(hose->first_busno), bar, bar_response);
}
#endif
if (ppc_md.progress)
ppc_md.progress("bios_fixup(): enter", 0x800);
/* added for IBM boot rom version 1.15 bios bar changes -AK */
/* Disable region first */
out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
/* PLB starting addr, PCI: 0x80000000 */
out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
/* PCI start addr, 0x80000000 */
out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
/* 512MB range of PLB to PCI */
out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
/* Enable no pre-fetch, enable region */
out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
(PPC405_PCI_UPPER_MEM -
PPC405_PCI_MEM_BASE)) | 0x01));
/* Disable region one */
out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
/* Disable region two */
out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
/* Enable PTM1 and PTM2, mapped to PLB address 0. */
out_le32((void *) &(pcip->ptm1la), 0x00000000);
out_le32((void *) &(pcip->ptm1ms), 0x00000001);
out_le32((void *) &(pcip->ptm2la), 0x00000000);
out_le32((void *) &(pcip->ptm2ms), 0x00000001);
/* Write zero to PTM1 BAR. */
early_write_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno),
PCI_BASE_ADDRESS_1,
0x00000000);
/* Disable PTM2 (unused) */
out_le32((void *) &(pcip->ptm2la), 0x00000000);
out_le32((void *) &(pcip->ptm2ms), 0x00000000);
/* end work arround */
if (ppc_md.progress)
ppc_md.progress("bios_fixup(): done", 0x800);
#ifdef DEBUG
printk("PCI bridge regs after fixup \n");
for (i = 0; i <= 2; i++) {
printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
printk(" pmm%dla\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
printk(" pmm%dpcila\t0x%x\n", i,
in_le32(&(pcip->pmm[i].pcila)));
printk(" pmm%dpciha\t0x%x\n", i,
in_le32(&(pcip->pmm[i].pciha)));
}
printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
early_read_config_dword(hose, hose->first_busno,
PCI_FUNC(hose->first_busno), bar,
&bar_response);
DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
hose->first_busno, PCI_SLOT(hose->first_busno),
PCI_FUNC(hose->first_busno), bar, bar_response);
}
#endif
}
void __init
ash_map_io(void)
{
ppc4xx_map_io();
io_block_mapping(ASH_RTC_VADDR, ASH_RTC_PADDR, ASH_RTC_SIZE, _PAGE_IO);
}
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
ppc4xx_init(r3, r4, r5, r6, r7);
ppc_md.setup_arch = ash_setup_arch;
ppc_md.setup_io_mappings = ash_map_io;
#ifdef CONFIG_PPC_RTC
ppc_md.time_init = todc_time_init;
ppc_md.set_rtc_time = todc_set_rtc_time;
ppc_md.get_rtc_time = todc_get_rtc_time;
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
#endif
}
/*
* arch/ppc/platforms/4xx/ash.h
*
* Macros, definitions, and data structures specific to the IBM PowerPC
* Ash eval board.
*
* Author: Armin Kuster <akuster@mvista.com>
*
* 2000-2002 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifdef __KERNEL__
#ifndef __ASM_ASH_H__
#define __ASM_ASH_H__
#include <platforms/4xx/ibmnp405h.h>
#ifndef __ASSEMBLY__
/*
* Data structure defining board information maintained by the boot
* ROM on IBM's "Ash" evaluation board. An effort has been made to
* keep the field names consistent with the 8xx 'bd_t' board info
* structures.
*/
typedef struct board_info {
unsigned char bi_s_version[4]; /* Version of this structure */
unsigned char bi_r_version[30]; /* Version of the IBM ROM */
unsigned int bi_memsize; /* DRAM installed, in bytes */
unsigned char bi_enetaddr[4][6]; /* Local Ethernet MAC address */
unsigned char bi_pci_enetaddr[6];
unsigned int bi_intfreq; /* Processor speed, in Hz */
unsigned int bi_busfreq; /* PLB Bus speed, in Hz */
unsigned int bi_pci_busfreq; /* PCI speed in Hz */
} bd_t;
/* Some 4xx parts use a different timebase frequency from the internal clock.
*/
#define bi_tbfreq bi_intfreq
/* Memory map for the IBM "Ash" NP405H evaluation board.
*/
extern void *ash_rtc_base;
#define ASH_RTC_PADDR ((uint)0xf0000000)
#define ASH_RTC_VADDR ASH_RTC_PADDR
#define ASH_RTC_SIZE ((uint)8*1024)
/* Early initialization address mapping for block_io.
* Standard 405GP map.
*/
#define PPC4xx_PCI_IO_PADDR ((uint)PPC405_PCI_PHY_IO_BASE)
#define PPC4xx_PCI_IO_VADDR PPC4xx_PCI_IO_PADDR
#define PPC4xx_PCI_IO_SIZE ((uint)64*1024)
#define PPC4xx_PCI_CFG_PADDR ((uint)PPC405_PCI_CONFIG_ADDR)
#define PPC4xx_PCI_CFG_VADDR PPC4xx_PCI_CFG_PADDR
#define PPC4xx_PCI_CFG_SIZE ((uint)4*1024)
#define PPC4xx_PCI_LCFG_PADDR ((uint)0xef400000)
#define PPC4xx_PCI_LCFG_VADDR PPC4xx_PCI_LCFG_PADDR
#define PPC4xx_PCI_LCFG_SIZE ((uint)4*1024)
#define PPC4xx_ONB_IO_PADDR ((uint)0xef600000)
#define PPC4xx_ONB_IO_VADDR PPC4xx_ONB_IO_PADDR
#define PPC4xx_ONB_IO_SIZE ((uint)4*1024)
#define NR_BOARD_IRQS 32
#ifdef CONFIG_PPC405GP_INTERNAL_CLOCK
#define BASE_BAUD 201600
#else
#define BASE_BAUD 691200
#endif
#define PPC4xx_MACHINE_NAME "IBM NP405H Ash"
extern char pci_irq_table[][4];
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_ASH_H__ */
#endif /* __KERNEL__ */
......@@ -171,7 +171,7 @@ ppc4xx_calibrate_decr(void)
unsigned int freq;
bd_t *bip = &__res;
#if defined(CONFIG_WALNUT) || defined(CONFIG_ASH) || defined(CONFIG_SYCAMORE)
#if defined(CONFIG_WALNUT) || defined(CONFIG_SYCAMORE)
/* Walnut boot rom sets DCR CHCR1 (aka CPC0_CR1) bit CETE to 1 */
mtdcr(DCRN_CHCR1, mfdcr(DCRN_CHCR1) & ~CHR1_CETE);
#endif
......
......@@ -19,10 +19,6 @@
#ifdef CONFIG_40x
#if defined(CONFIG_ASH)
#include <platforms/4xx/ash.h>
#endif
#if defined(CONFIG_BUBINGA)
#include <platforms/4xx/bubinga.h>
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment