Commit f4f8a039 authored by Linus Torvalds's avatar Linus Torvalds

Manual merge of minor syntax clash

parents dc0a81a9 4f70b416
......@@ -95,10 +95,10 @@ HandSpring Visor, Palm USB, and Cli
Kroah-Hartman at greg@kroah.com
Compaq iPAQ and HP Jornada driver
Compaq iPAQ, HP Jornada and Casio EM500 driver
This driver can be used to connect to Compaq iPAQ and HP Jornada PDAs
running Windows CE 3.0 or PocketPC 2002 using a USB cable/cradle. It
This driver can be used to connect to Compaq iPAQ, HP Jornada and Casio EM500
PDAs running Windows CE 3.0 or PocketPC 2002 using a USB cable/cradle. It
has been tested only on the Compaq H3135, but is rumoured to work on
with the H3600 and later models as well as the Jornada 548 and 568.
With minor modifications, it may work for other CE based handhelds too.
......
......@@ -1141,6 +1141,10 @@ static int sd_init_onedisk(Scsi_Disk * sdkp, int dsk_nr)
* we're only interested in the header anyway, this should
* be fine.
* -- Matthew Dharm (mdharm-scsi@one-eyed-alien.net)
*
* As it turns out, some devices return an error for
* every MODE_SENSE request except one for page 0.
* So, we should also try that. --aeb
*/
memset((void *) &cmd[0], 0, 8);
......@@ -1161,8 +1165,9 @@ static int sd_init_onedisk(Scsi_Disk * sdkp, int dsk_nr)
the_result = SRpnt->sr_result;
if (the_result) {
printk(KERN_NOTICE "%s: test WP failed, assume "
"Write Enabled\n", nbuff);
printk("%s: test WP failed, assume Write Enabled\n",
nbuff);
/* alternatively, try page 0 */
} else {
sdkp->write_prot = ((buffer[2] & 0x80) != 0);
printk(KERN_NOTICE "%s: Write Protect is %s\n", nbuff,
......
......@@ -794,6 +794,7 @@ static void *usblp_probe(struct usb_device *dev, unsigned int ifnum,
{
struct usblp *usblp = 0;
int protocol;
int retval;
char name[6];
/* Malloc and start initializing usblp structure so we can use it
......@@ -808,7 +809,12 @@ static void *usblp_probe(struct usb_device *dev, unsigned int ifnum,
init_waitqueue_head(&usblp->wait);
usblp->ifnum = ifnum;
if (usb_register_dev(&usblp_driver, 1, &usblp->minor)) {
retval = usb_register_dev(&usblp_driver, 1, &usblp->minor);
if (retval) {
if (retval != -ENODEV) {
err("Not able to get a minor for this device.");
goto abort;
}
/* Look for a free usblp_table entry on our own. */
while (usblp_table[usblp->minor]) {
usblp->minor++;
......@@ -871,6 +877,9 @@ static void *usblp_probe(struct usb_device *dev, unsigned int ifnum,
usblp_check_status(usblp, 0);
#endif
/* add a table entry so the device works when advertised */
usblp_table[usblp->minor] = usblp;
/* If we have devfs, create with perms=660. */
sprintf(name, "lp%d", usblp->minor);
usblp->devfs = devfs_register(usb_devfs_handle, name,
......@@ -886,7 +895,7 @@ static void *usblp_probe(struct usb_device *dev, unsigned int ifnum,
usblp->current_protocol, usblp->dev->descriptor.idVendor,
usblp->dev->descriptor.idProduct);
return usblp_table[usblp->minor] = usblp;
return usblp;
abort:
if (usblp) {
......
......@@ -154,12 +154,10 @@ static int ohci_hub_control (
u16 wLength
) {
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
int ports;
int ports = hcd->self.root_hub->maxchild;
u32 temp;
int retval = 0;
// if (port request)
ports = roothub_a (ohci) & RH_A_NDP;
switch (typeReq) {
case ClearHubFeature:
switch (wValue) {
......
......@@ -569,6 +569,9 @@ td_fill (struct ohci_hcd *ohci, unsigned int info,
td->hwNextTD = cpu_to_le32 (td_pt->td_dma);
td->hwPSW [0] = cpu_to_le16 ((data & 0x0FFF) | 0xE000);
/* HC might read the TD right after we link it ... */
wmb ();
/* append to queue */
td->ed->hwTailP = td->hwNextTD;
}
......@@ -641,8 +644,10 @@ static void td_submit_urb (struct urb *urb)
cnt++;
}
/* start bulk list */
if (!ohci->sleeping)
if (!ohci->sleeping) {
wmb ();
writel (OHCI_BLF, &ohci->regs->cmdstatus);
}
break;
case PIPE_INTERRUPT:
......@@ -654,6 +659,7 @@ static void td_submit_urb (struct urb *urb)
break;
case PIPE_CONTROL:
/* control requests don't use toggle state */
info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
td_fill (ohci, info,
#ifdef CONFIG_PCI
......@@ -678,8 +684,10 @@ static void td_submit_urb (struct urb *urb)
: TD_CC | TD_DP_OUT | TD_T_DATA1;
td_fill (ohci, info, data, 0, urb, cnt++);
/* start control list */
if (!ohci->sleeping)
if (!ohci->sleeping) {
wmb ();
writel (OHCI_CLF, &ohci->regs->cmdstatus);
}
break;
case PIPE_ISOCHRONOUS:
......
......@@ -411,6 +411,7 @@ static void* mdc800_usb_probe (struct usb_device *dev ,unsigned int ifnum,
int i,j;
struct usb_interface_descriptor *intf_desc;
int irq_interval=0;
int retval;
dbg ("(mdc800_usb_probe) called.");
......@@ -475,7 +476,11 @@ static void* mdc800_usb_probe (struct usb_device *dev ,unsigned int ifnum,
down (&mdc800->io_lock);
usb_register_dev (&mdc800_usb_driver, 1, &mdc800->minor);
retval = usb_register_dev (&mdc800_usb_driver, 1, &mdc800->minor);
if (retval && (retval != -ENODEV)) {
err ("Not able to get a minor for this device.");
return 0;
}
mdc800->dev=dev;
mdc800->open=0;
......
......@@ -812,6 +812,7 @@ probe_scanner(struct usb_device *dev, unsigned int ifnum,
int ep_cnt;
int ix;
int scn_minor;
int retval;
char valid_device = 0;
char have_bulk_in, have_bulk_out, have_intr;
......@@ -953,7 +954,13 @@ probe_scanner(struct usb_device *dev, unsigned int ifnum,
down(&scn_mutex);
if (usb_register_dev(&scanner_driver, 1, &scn_minor)) {
retval = usb_register_dev(&scanner_driver, 1, &scn_minor);
if (retval) {
if (retval != -ENODEV) {
err ("Not able to get a minor for this device.");
up(&scn_mutex);
return NULL;
}
for (scn_minor = 0; scn_minor < SCN_MAX_MNR; scn_minor++) {
if (!p_scn_table[scn_minor])
break;
......
......@@ -606,6 +606,7 @@ int hiddev_connect(struct hid_device *hid)
{
struct hiddev *hiddev;
int minor, i;
int retval;
char devfs_name[16];
for (i = 0; i < hid->maxapplication; i++)
......@@ -615,7 +616,12 @@ int hiddev_connect(struct hid_device *hid)
if (i == hid->maxapplication)
return -1;
if (usb_register_dev (&hiddev_driver, 1, &minor)) {
retval = usb_register_dev (&hiddev_driver, 1, &minor);
if (retval) {
if (retval != -ENODEV) {
err ("Not able to get a minor for this device.");
return -1;
}
for (minor = 0; minor < HIDDEV_MINORS && hiddev_table[minor]; minor++);
if (minor == HIDDEV_MINORS) {
printk(KERN_ERR "hiddev: no more free hiddev devices\n");
......
......@@ -727,6 +727,7 @@ static void *dabusb_probe (struct usb_device *usbdev, unsigned int ifnum,
const struct usb_device_id *id)
{
int devnum;
int retval;
pdabusb_t s;
dbg("dabusb: probe: vendor id 0x%x, device id 0x%x ifnum:%d",
......@@ -739,7 +740,10 @@ static void *dabusb_probe (struct usb_device *usbdev, unsigned int ifnum,
if (ifnum != _DABUSB_IF && usbdev->descriptor.idProduct == 0x9999)
return NULL;
if (usb_register_dev (&dabusb_driver, 1, &devnum)) {
retval = usb_register_dev (&dabusb_driver, 1, &devnum);
if (retval) {
if (retval != -ENODEV)
return NULL;
devnum = dabusb_find_struct ();
if (devnum == -1)
return NULL;
......
......@@ -3899,6 +3899,17 @@ static void *ibmcam_probe(struct usb_device *dev, unsigned int ifnum, const stru
return uvd;
}
static struct usb_device_id id_table[] = {
{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0002, 0x0002) }, /* Model 1 */
{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 2 */
{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0301, 0x0301) }, /* Model 3 */
{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, NETCAM_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 4 */
{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800C_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 2 */
{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800D_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 4 */
{ } /* Terminating entry */
};
/*
* ibmcam_init()
*
......@@ -3926,7 +3937,8 @@ static int __init ibmcam_init(void)
sizeof(ibmcam_t),
"ibmcam",
&cbTbl,
THIS_MODULE);
THIS_MODULE,
id_table);
}
static void __exit ibmcam_cleanup(void)
......@@ -3934,15 +3946,6 @@ static void __exit ibmcam_cleanup(void)
usbvideo_Deregister(&cams);
}
static __devinitdata struct usb_device_id id_table[] = {
{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0002, 0x0002) }, /* Model 1 */
{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 2 */
{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, IBMCAM_PRODUCT_ID, 0x0301, 0x0301) }, /* Model 3 */
{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, NETCAM_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 4 */
{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800C_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 2 */
{ USB_DEVICE_VER(IBMCAM_VENDOR_ID, VEO_800D_PRODUCT_ID, 0x030a, 0x030a) }, /* Model 4 */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
module_init(ibmcam_init);
......
......@@ -767,7 +767,8 @@ static int __init konicawc_init(void)
sizeof(struct konicawc),
"konicawc",
&cbTbl,
THIS_MODULE);
THIS_MODULE,
id_table);
}
......
......@@ -659,6 +659,12 @@ static void *ultracam_probe(struct usb_device *dev, unsigned int ifnum ,const st
return uvd;
}
static struct usb_device_id id_table[] = {
{ USB_DEVICE(ULTRACAM_VENDOR_ID, ULTRACAM_PRODUCT_ID) },
{ } /* Terminating entry */
};
/*
* ultracam_init()
*
......@@ -682,7 +688,8 @@ static int __init ultracam_init(void)
sizeof(ultracam_t),
"ultracam",
&cbTbl,
THIS_MODULE);
THIS_MODULE,
id_table);
}
static void __exit ultracam_cleanup(void)
......@@ -690,16 +697,7 @@ static void __exit ultracam_cleanup(void)
usbvideo_Deregister(&cams);
}
#if defined(usb_device_id_ver)
static __devinitdata struct usb_device_id id_table[] = {
{ USB_DEVICE(ULTRACAM_VENDOR_ID, ULTRACAM_PRODUCT_ID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
#endif /* defined(usb_device_id_ver) */
MODULE_LICENSE("GPL");
module_init(ultracam_init);
......
......@@ -749,7 +749,8 @@ int usbvideo_register(
const int num_extra,
const char *driverName,
const usbvideo_cb_t *cbTbl,
struct module *md )
struct module *md,
const struct usb_device_id *id_table)
{
static const char proc[] = "usbvideo_register";
usbvideo_t *cams;
......@@ -839,6 +840,7 @@ int usbvideo_register(
cams->usbdrv.name = cams->drvName;
cams->usbdrv.probe = cams->cb.probe;
cams->usbdrv.disconnect = cams->cb.disconnect;
cams->usbdrv.id_table = id_table;
#if USES_PROC_FS
if (cams->uses_procfs) {
......@@ -1192,7 +1194,7 @@ static int usbvideo_v4l_mmap(struct file *file, struct vm_area_struct *vma)
if (!CAMERA_IS_OPERATIONAL(uvd))
return -EFAULT;
if (size > (((2 * uvd->max_frame_size) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))
if (size > (((USBVIDEO_NUMFRAMES * uvd->max_frame_size) + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1)))
return -EINVAL;
pos = (unsigned long) uvd->fbuf;
......@@ -1471,12 +1473,14 @@ static int usbvideo_v4l_do_ioctl(struct inode *inode, struct file *file,
case VIDIOCGMBUF:
{
struct video_mbuf *vm = arg;
int i;
memset(vm, 0, sizeof(*vm));
vm->size = uvd->max_frame_size * 2;
vm->frames = 2;
vm->offsets[0] = 0;
vm->offsets[1] = uvd->max_frame_size;
vm->size = uvd->max_frame_size * USBVIDEO_NUMFRAMES;
vm->frames = USBVIDEO_NUMFRAMES;
for(i = 0; i < USBVIDEO_NUMFRAMES; i++)
vm->offsets[i] = i * uvd->max_frame_size;
return 0;
}
case VIDIOCMCAPTURE:
......@@ -1518,8 +1522,8 @@ static int usbvideo_v4l_do_ioctl(struct inode *inode, struct file *file,
}
return -EINVAL;
}
if ((vm->frame != 0) && (vm->frame != 1)) {
err("VIDIOCMCAPTURE: vm.frame=%d. !E [0,1]", vm->frame);
if ((vm->frame < 0) || (vm->frame >= USBVIDEO_NUMFRAMES)) {
err("VIDIOCMCAPTURE: vm.frame=%d. !E [0-%d]", vm->frame, USBVIDEO_NUMFRAMES-1);
return -EINVAL;
}
if (uvd->frame[vm->frame].frameState == FrameState_Grabbing) {
......@@ -1618,7 +1622,7 @@ static int usbvideo_v4l_read(struct file *file, char *buf,
static const char proc[] = "usbvideo_v4l_read";
uvd_t *uvd = file->private_data;
int noblock = file->f_flags & O_NONBLOCK;
int frmx = -1;
int frmx = -1, i;
usbvideo_frame_t *frame;
if (!CAMERA_IS_OPERATIONAL(uvd) || (buf == NULL))
......@@ -1630,14 +1634,13 @@ static int usbvideo_v4l_read(struct file *file, char *buf,
down(&uvd->lock);
/* See if a frame is completed, then use it. */
if ((uvd->frame[0].frameState == FrameState_Done) ||
(uvd->frame[0].frameState == FrameState_Done_Hold) ||
(uvd->frame[0].frameState == FrameState_Error)) {
frmx = 0;
} else if ((uvd->frame[1].frameState >= FrameState_Done) ||
(uvd->frame[1].frameState == FrameState_Done_Hold) ||
(uvd->frame[1].frameState >= FrameState_Done)) {
frmx = 1;
for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
if ((uvd->frame[i].frameState == FrameState_Done) ||
(uvd->frame[i].frameState == FrameState_Done_Hold) ||
(uvd->frame[i].frameState == FrameState_Error)) {
frmx = i;
break;
}
}
/* FIXME: If we don't start a frame here then who ever does? */
......@@ -1652,10 +1655,12 @@ static int usbvideo_v4l_read(struct file *file, char *buf,
* We will need to wait until it becomes cooked, of course.
*/
if (frmx == -1) {
if (uvd->frame[0].frameState == FrameState_Grabbing)
frmx = 0;
else if (uvd->frame[1].frameState == FrameState_Grabbing)
frmx = 1;
for(i = 0; i < USBVIDEO_NUMFRAMES; i++) {
if (uvd->frame[i].frameState == FrameState_Grabbing) {
frmx = i;
break;
}
}
}
/*
......@@ -1753,7 +1758,7 @@ static int usbvideo_v4l_read(struct file *file, char *buf,
/* Mark it as available to be used again. */
uvd->frame[frmx].frameState = FrameState_Unused;
if (usbvideo_NewFrame(uvd, frmx ? 0 : 1)) {
if (usbvideo_NewFrame(uvd, (frmx + 1) % USBVIDEO_NUMFRAMES)) {
err("%s: usbvideo_NewFrame failed.", proc);
}
}
......@@ -1990,7 +1995,7 @@ static int usbvideo_NewFrame(uvd_t *uvd, int framenum)
uvd->settingsAdjusted = 1;
}
n = (framenum - 1 + USBVIDEO_NUMFRAMES) % USBVIDEO_NUMFRAMES;
n = (framenum + 1) % USBVIDEO_NUMFRAMES;
if (uvd->frame[n].frameState == FrameState_Ready)
framenum = n;
......@@ -2022,7 +2027,8 @@ static int usbvideo_NewFrame(uvd_t *uvd, int framenum)
*/
if (!(uvd->flags & FLAGS_SEPARATE_FRAMES)) {
/* This copies previous frame into this one to mask losses */
memmove(frame->data, uvd->frame[1-framenum].data, uvd->max_frame_size);
int prev = (framenum - 1 + USBVIDEO_NUMFRAMES) % USBVIDEO_NUMFRAMES;
memmove(frame->data, uvd->frame[prev].data, uvd->max_frame_size);
} else {
if (uvd->flags & FLAGS_CLEAN_FRAMES) {
/* This provides a "clean" frame but slows things down */
......
......@@ -327,7 +327,8 @@ int usbvideo_register(
const int num_extra,
const char *driverName,
const usbvideo_cb_t *cbTable,
struct module *md);
struct module *md,
const struct usb_device_id *id_table);
uvd_t *usbvideo_AllocateDevice(usbvideo_t *cams);
int usbvideo_RegisterVideoDevice(uvd_t *uvd);
void usbvideo_Deregister(usbvideo_t **uvt);
......
......@@ -1948,7 +1948,13 @@ static void *auerswald_probe (struct usb_device *usbdev, unsigned int ifnum,
init_waitqueue_head (&cp->bufferwait);
down (&dev_table_mutex);
if (usb_register_dev (&auerswald_driver, 1, &dtindex)) {
ret = usb_register_dev (&auerswald_driver, 1, &dtindex);
if (ret) {
if (ret != -ENODEV) {
err ("Not able to get a minor for this device.");
up (&dev_table_mutex);
goto pfail;
}
/* find a free slot in the device table */
for (dtindex = 0; dtindex < AUER_MAX_DEVICES; ++dtindex) {
if (dev_table[dtindex] == NULL)
......
......@@ -290,6 +290,7 @@ brlvger_probe (struct usb_device *dev, unsigned ifnum,
{
struct brlvger_priv *priv = NULL;
int i;
int retval;
struct usb_endpoint_descriptor *endpoint;
struct usb_interface_descriptor *actifsettings;
/* protects against reentrance: once we've found a free slot
......@@ -315,7 +316,12 @@ brlvger_probe (struct usb_device *dev, unsigned ifnum,
down(&reserve_sem);
if (usb_register_dev(&brlvger_driver, 1, &i)) {
retval = usb_register_dev(&brlvger_driver, 1, &i);
if (retval) {
if (retval != -ENODEV) {
err("Not able to get a minor for this device.");
goto error;
}
for( i = 0; i < MAX_NR_BRLVGER_DEVS; i++ )
if( display_table[i] == NULL )
break;
......
......@@ -62,6 +62,8 @@
#define DRIVER_AUTHOR "Petko Manolov <petkan@users.sourceforge.net>"
#define DRIVER_DESC "Pegasus/Pegasus II USB Ethernet driver"
static const char driver_name [] = "pegasus";
#define PEGASUS_USE_INTR
#define PEGASUS_WRITE_EEPROM
#define BMSR_MEDIA (BMSR_10HALF | BMSR_10FULL | BMSR_100HALF | \
......@@ -811,7 +813,6 @@ static int pegasus_ethtool_ioctl(struct net_device *net, void *uaddr)
{
pegasus_t *pegasus;
int cmd;
char tmp[128];
pegasus = net->priv;
if (get_user(cmd, (int *) uaddr))
......@@ -819,12 +820,11 @@ static int pegasus_ethtool_ioctl(struct net_device *net, void *uaddr)
switch (cmd) {
case ETHTOOL_GDRVINFO:{
struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO };
strncpy(info.driver, DRIVER_DESC, ETHTOOL_BUSINFO_LEN);
strncpy(info.driver, driver_name, sizeof info.driver);
strncpy(info.version, DRIVER_VERSION,
ETHTOOL_BUSINFO_LEN);
sprintf(tmp, "usb%d:%d", pegasus->usb->bus->busnum,
pegasus->usb->devnum);
strncpy(info.bus_info, tmp, ETHTOOL_BUSINFO_LEN);
usb_make_path(pegasus->usb, info.bus_info,
sizeof info.bus_info);
if (copy_to_user(uaddr, &info, sizeof(info)))
return -EFAULT;
return 0;
......@@ -833,8 +833,7 @@ static int pegasus_ethtool_ioctl(struct net_device *net, void *uaddr)
struct ethtool_cmd ecmd;
short lpa, bmcr;
if (copy_from_user(&ecmd, uaddr, sizeof(ecmd)))
return -EFAULT;
memset(&ecmd, 0, sizeof ecmd);
ecmd.supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
......@@ -1104,7 +1103,7 @@ static void pegasus_disconnect(struct usb_device *dev, void *ptr)
}
static struct usb_driver pegasus_driver = {
name: "pegasus",
name: driver_name,
probe: pegasus_probe,
disconnect: pegasus_disconnect,
id_table: pegasus_ids,
......
......@@ -60,9 +60,9 @@ CONFIG_USB_SERIAL_VISOR
module, say M here and read <file:Documentation/modules.txt>.
CONFIG_USB_SERIAL_IPAQ
Say Y here if you want to connect to your Compaq iPAQ or HP Jornada
548/568 running Windows CE 3.0 or PocketPC 2002 using a USB
cradle/cable. For information on using the driver,
Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
548/568 or Casio EM500 running Windows CE 3.0 or PocketPC 2002
using a USB cradle/cable. For information on using the driver,
read <file:Documentation/usb/usb-serial.txt>.
This code is also available as a module ( = code which can be
......
......@@ -16,7 +16,7 @@ dep_tristate ' USB Digi International AccelePort USB Serial Driver' CONFIG_USB_
dep_tristate ' USB Empeg empeg-car Mark I/II Driver' CONFIG_USB_SERIAL_EMPEG $CONFIG_USB_SERIAL
dep_tristate ' USB FTDI Single Port Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_FTDI_SIO $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB Handspring Visor / Palm m50x / Sony Clie Driver' CONFIG_USB_SERIAL_VISOR $CONFIG_USB_SERIAL
dep_tristate ' USB Compaq iPAQ / HP Jornada Driver' CONFIG_USB_SERIAL_IPAQ $CONFIG_USB_SERIAL
dep_tristate ' USB Compaq iPAQ / HP Jornada / Casio EM500 Driver' CONFIG_USB_SERIAL_IPAQ $CONFIG_USB_SERIAL
dep_tristate ' USB IR Dongle Serial Driver (EXPERIMENTAL)' CONFIG_USB_SERIAL_IR $CONFIG_USB_SERIAL $CONFIG_EXPERIMENTAL
dep_tristate ' USB Inside Out Edgeport Serial Driver' CONFIG_USB_SERIAL_EDGEPORT $CONFIG_USB_SERIAL
dep_tristate ' USB Keyspan PDA Single Port Serial Driver' CONFIG_USB_SERIAL_KEYSPAN_PDA $CONFIG_USB_SERIAL
......
......@@ -25,6 +25,11 @@ static __devinitdata struct usb_device_id edgeport_2port_id_table [] = {
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_421) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_21) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_2_DIN) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_2) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_2I) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_421) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_21) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_2_DIN) },
{ }
};
......@@ -37,6 +42,11 @@ static __devinitdata struct usb_device_id edgeport_4port_id_table [] = {
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8_DUAL_CPU) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4_DIN) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_4) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_4T) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_4I) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_8_DUAL_CPU) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_4_DIN) },
{ }
};
......@@ -44,6 +54,9 @@ static __devinitdata struct usb_device_id edgeport_8port_id_table [] = {
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_8) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_16_DUAL_CPU) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_8I) },
{ }
};
......@@ -66,6 +79,19 @@ static __devinitdata struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_16_DUAL_CPU) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_COMPATIBLE) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8I) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_2) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_2I) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_421) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_21) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_2_DIN) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_4) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_4T) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_4I) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_8_DUAL_CPU) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_4_DIN) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_8) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_16_DUAL_CPU) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_BB_EDGEPORT_8I) },
{ } /* Terminating entry */
};
......
......@@ -92,6 +92,20 @@
#define ION_DEVICE_ID_EDGEPORT_8I 0x014 // Edgeport/8 RS422 (single-CPU)
#define ION_DEVICE_ID_MT4X56USB 0x1403 // OEM device
// BlackBox OEM devices
#define ION_DEVICE_ID_BB_EDGEPORT_4 0x001 // Edgeport/4 RS232
#define ION_DEVICE_ID_BB_EDGEPORT_4T 0x004 // Edgeport/4 RS232 for Telxon (aka "Fleetport")
#define ION_DEVICE_ID_BB_EDGEPORT_2 0x005 // Edgeport/2 RS232
#define ION_DEVICE_ID_BB_EDGEPORT_4I 0x006 // Edgeport/4 RS422
#define ION_DEVICE_ID_BB_EDGEPORT_2I 0x007 // Edgeport/2 RS422/RS485
#define ION_DEVICE_ID_BB_EDGEPORT_421 0x00C // Edgeport/421 Hub+RS232+Parallel
#define ION_DEVICE_ID_BB_EDGEPORT_21 0x00D // Edgeport/21 RS232+Parallel
#define ION_DEVICE_ID_BB_EDGEPORT_8_DUAL_CPU 0x00E // Half of an Edgeport/8 (the kind with 2 EP/4s on 1 PCB)
#define ION_DEVICE_ID_BB_EDGEPORT_8 0x00F // Edgeport/8 (single-CPU)
#define ION_DEVICE_ID_BB_EDGEPORT_2_DIN 0x010 // Edgeport/2 RS232 with Apple DIN connector
#define ION_DEVICE_ID_BB_EDGEPORT_4_DIN 0x011 // Edgeport/4 RS232 with Apple DIN connector
#define ION_DEVICE_ID_BB_EDGEPORT_16_DUAL_CPU 0x012 // Half of an Edgeport/16 (the kind with 2 EP/8s)
#define ION_DEVICE_ID_BB_EDGEPORT_8I 0x014 // Edgeport/8 RS422 (single-CPU)
// These IDs are used by the Edgeport.exe program for uninstalling.
//
#define EDGEPORT_DEVICE_IDS {0x001, 0x003, 0x004, 0x005, 0x006, 0x007, 0x00B, \
......
......@@ -9,6 +9,10 @@
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* (30/4/2002) ganesh
* Added support for the Casio EM500. Completely untested. Thanks
* to info from Nathan <wfilardo@fuse.net>
*
* (19/3/2002) ganesh
* Don't submit urbs while holding spinlocks. Not strictly necessary
* in 2.5.x.
......@@ -58,7 +62,7 @@
*/
#define DRIVER_VERSION "v0.2"
#define DRIVER_AUTHOR "Ganesh Varadarajan <ganesh@veritas.com>"
#define DRIVER_DESC "USB Compaq iPAQ, HP Jornada driver"
#define DRIVER_DESC "USB Compaq iPAQ, HP Jornada, Casio EM500 driver"
/* Function prototypes for an ipaq */
static int ipaq_open (struct usb_serial_port *port, struct file *filp);
......@@ -81,6 +85,7 @@ static __devinitdata struct usb_device_id ipaq_id_table [] = {
{ USB_DEVICE(COMPAQ_VENDOR_ID, COMPAQ_IPAQ_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_JORNADA_548_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_JORNADA_568_ID) },
{ USB_DEVICE(CASIO_VENDOR_ID, CASIO_EM500_ID) },
{ } /* Terminating entry */
};
......
......@@ -23,6 +23,9 @@
#define HP_JORNADA_548_ID 0x1016
#define HP_JORNADA_568_ID 0x1116
#define CASIO_VENDOR_ID 0x07cf
#define CASIO_EM500_ID 0x2002
/*
* Since we can't queue our bulk write urbs (don't know why - it just
* doesn't work), we can send down only one write urb at a time. The simplistic
......
......@@ -142,6 +142,7 @@ static struct usb_serial_device_type pl2303_device = {
struct pl2303_private {
u8 line_control;
u8 termios_initialized;
};
......@@ -214,13 +215,19 @@ static void pl2303_set_termios (struct usb_serial_port *port, struct termios *ol
int baud;
int i;
dbg (__FUNCTION__ " - port %d", port->number);
dbg (__FUNCTION__ " - port %d, initialized = %d", port->number,
((struct pl2303_private *) port->private)->termios_initialized);
if ((!port->tty) || (!port->tty->termios)) {
dbg(__FUNCTION__" - no tty structures");
return;
}
if (!(((struct pl2303_private *) port->private)->termios_initialized)) {
*(port->tty->termios) = tty_std_termios;
port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
((struct pl2303_private *) port->private)->termios_initialized = 1;
}
cflag = port->tty->termios->c_cflag;
/* check that they really want us to change something */
if (old_termios) {
......@@ -390,9 +397,6 @@ static int pl2303_open (struct usb_serial_port *port, struct file *filp)
/* Setup termios */
if (port->tty) {
*(port->tty->termios) = tty_std_termios;
port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
pl2303_set_termios (port, &tmp_termios);
}
......
......@@ -28,11 +28,15 @@ CONFIG_USB_STORAGE_FREECOM
Support for the Freecom USB to IDE/ATAPI adaptor.
Freecom has a web page at <http://www.freecom.de/>.
CONFIG_USB_STORAGE_DATAFAB
Support for certain Datafab CompactFlash readers.
Datafab has a web page at <http://www.datafabusa.com/>.
CONFIG_USB_STORAGE_DPCM
Say Y here to support the Microtech ZiO! CompactFlash/SmartMedia
reader, details at <http://www.microtechint.com/zio/index.html>.
This driver treats the flash card as a removable storage device.
Say Y here to support the Microtech ZiO! CompactFlash reader.
There is a web page at <http://www.microtechint.com/zio/index.html>.
CONFIG_USB_STORAGE_SDDR09
Say Y here to include additional code to support the Sandisk SDDR-09
SmartMedia reader in the USB Mass Storage driver.
Also works for the Microtech Zio! SmartMedia reader.
......@@ -6,7 +6,7 @@ if [ "$CONFIG_SCSI" = "n" ]; then
fi
dep_tristate ' USB Mass Storage support' CONFIG_USB_STORAGE $CONFIG_USB $CONFIG_SCSI
dep_mbool ' USB Mass Storage verbose debug' CONFIG_USB_STORAGE_DEBUG $CONFIG_USB_STORAGE
dep_mbool ' Datafab MDCFE-B Compact Flash Reader support' CONFIG_USB_STORAGE_DATAFAB $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' Datafab Compact Flash Reader support' CONFIG_USB_STORAGE_DATAFAB $CONFIG_USB_STORAGE $CONFIG_EXPERIMENTAL
dep_mbool ' Freecom USB/ATAPI Bridge support' CONFIG_USB_STORAGE_FREECOM $CONFIG_USB_STORAGE
dep_mbool ' ISD-200 USB/ATA Bridge support' CONFIG_USB_STORAGE_ISD200 $CONFIG_USB_STORAGE
dep_mbool ' Microtech CompactFlash/SmartMedia support' CONFIG_USB_STORAGE_DPCM $CONFIG_USB_STORAGE
......
......@@ -327,6 +327,7 @@ void usb_stor_show_sense(
case 0x3502: what="enclosure services unavailable"; break;
case 0x3503: what="enclosure services transfer failure"; break;
case 0x3504: what="enclosure services transfer refused"; break;
case 0x3A00: what="medium not present"; break;
case 0x3B0F: what="end of medium reached"; break;
case 0x3F02: what="changed operating definition"; break;
case 0x4100: what="data path failure (should use 40 NN)"; break;
......
......@@ -37,8 +37,13 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include "usb.h"
/* This places the Shuttle/SCM USB<->SCSI bridge devices in multi-target
* mode */
int usb_stor_euscsi_init(struct us_data *us);
#ifdef CONFIG_USB_STORAGE_SDDR09
int sddr09_init(struct us_data *us);
#endif
......@@ -192,7 +192,7 @@ static int jumpshot_raw_bulk(int direction,
return US_BULK_TRANSFER_SHORT;
}
US_DEBUGP("jumpshot_raw_bulk: Transfered %d of %d bytes\n", act_len, len);
US_DEBUGP("jumpshot_raw_bulk: Transferred %d of %d bytes\n", act_len, len);
return US_BULK_TRANSFER_GOOD;
}
......
/* Driver for SanDisk SDDR-09 SmartMedia reader
*
* $Id: sddr09.c,v 1.22 2001/12/08 23:32:48 mdharm Exp $
*
* SDDR09 driver v0.1:
*
* First release
*
* Current development and maintenance by:
* (c) 2000, 2001 Robert Baruch (autophile@starband.net)
* (c) 2002 Andries Brouwer (aeb@cwi.nl)
*
* The SanDisk SDDR-09 SmartMedia reader uses the Shuttle EUSB-01 chip.
* This chip is a programmable USB controller. In the SDDR-09, it has
* been programmed to obey a certain limited set of SCSI commands. This
* driver translates the "real" SCSI commands to the SDDR-09 SCSI
* been programmed to obey a certain limited set of SCSI commands.
* This driver translates the "real" SCSI commands to the SDDR-09 SCSI
* commands.
*
* This program is free software; you can redistribute it and/or modify it
......@@ -44,6 +38,180 @@
#define LSB_of(s) ((s)&0xFF)
#define MSB_of(s) ((s)>>8)
/* #define US_DEBUGP printk */
/*
* First some stuff that does not belong here:
* data on SmartMedia and other cards, completely
* unrelated to this driver.
* Similar stuff occurs in <linux/mtd/nand_ids.h>.
*/
struct nand_flash_dev {
int model_id;
int chipshift; /* 1<<cs bytes total capacity */
char pageshift; /* 1<<ps bytes in a page */
char blockshift; /* 1<<bs pages in an erase block */
char zoneshift; /* 1<<zs blocks in a zone */
/* # of logical blocks is 125/128 of this */
char pageadrlen; /* length of an address in bytes - 1 */
};
/*
* NAND Flash Manufacturer ID Codes
*/
#define NAND_MFR_AMD 0x01
#define NAND_MFR_TOSHIBA 0x98
#define NAND_MFR_SAMSUNG 0xec
static inline char *nand_flash_manufacturer(int manuf_id) {
switch(manuf_id) {
case NAND_MFR_AMD:
return "AMD";
case NAND_MFR_TOSHIBA:
return "Toshiba";
case NAND_MFR_SAMSUNG:
return "Samsung";
default:
return "unknown";
}
}
/*
* It looks like it is unnecessary to attach manufacturer to the
* remaining data: SSFDC prescribes manufacturer-independent id codes.
*/
static struct nand_flash_dev nand_flash_ids[] = {
/* NAND flash - these I verified */
{ 0x6e, 20, 8, 4, 8, 2}, /* 1 MB */
{ 0xe8, 20, 8, 4, 8, 2}, /* 1 MB */
{ 0xec, 20, 8, 4, 8, 2}, /* 1 MB */
{ 0x64, 21, 8, 4, 9, 2}, /* 2 MB */
{ 0xea, 21, 8, 4, 9, 2}, /* 2 MB */
{ 0x6b, 22, 9, 4, 9, 2}, /* 4 MB */
{ 0xe3, 22, 9, 4, 9, 2}, /* 4 MB */
{ 0xe5, 22, 9, 4, 9, 2}, /* 4 MB */
{ 0xe6, 23, 9, 4, 10, 2}, /* 8 MB */
{ 0x73, 24, 9, 5, 10, 2}, /* 16 MB */
{ 0x75, 25, 9, 5, 10, 2}, /* 32 MB */
{ 0x76, 26, 9, 5, 10, 3}, /* 64 MB */
{ 0x79, 27, 9, 5, 10, 3}, /* 128 MB */
/* There do also exist 96 MB (from Datafab) and 256 MB cards */
/* MASK ROM - from unknown source */
{ 0x5d, 21, 9, 4, 8, 2}, /* 2 MB */
{ 0xd5, 22, 9, 4, 9, 2}, /* 4 MB */
{ 0xd6, 23, 9, 4, 10, 2}, /* 8 MB */
{ 0,}
};
#define SIZE(a) (sizeof(a)/sizeof((a)[0]))
static struct nand_flash_dev *
nand_find_id(unsigned char id) {
int i;
for (i = 0; i < SIZE(nand_flash_ids); i++)
if (nand_flash_ids[i].model_id == id)
return &(nand_flash_ids[i]);
return NULL;
}
/*
* ECC computation.
*/
static unsigned char parity[256];
static unsigned char ecc2[256];
static void nand_init_ecc(void) {
int i, j, a;
parity[0] = 0;
for (i = 1; i < 256; i++)
parity[i] = (parity[i&(i-1)] ^ 1);
for (i = 0; i < 256; i++) {
a = 0;
for (j = 0; j < 8; j++) {
if (i & (1<<j)) {
if ((j & 1) == 0)
a ^= 0x04;
if ((j & 2) == 0)
a ^= 0x10;
if ((j & 4) == 0)
a ^= 0x40;
}
}
ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0));
}
}
/* compute 3-byte ecc on 256 bytes */
static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
int i, j, a;
unsigned char par, bit, bits[8];
par = 0;
for (j = 0; j < 8; j++)
bits[j] = 0;
/* collect 16 checksum bits */
for (i = 0; i < 256; i++) {
par ^= data[i];
bit = parity[data[i]];
for (j = 0; j < 8; j++)
if ((i & (1<<j)) == 0)
bits[j] ^= bit;
}
/* put 4+4+4 = 12 bits in the ecc */
a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0];
ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4];
ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
ecc[2] = ecc2[par];
}
static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) {
return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]);
}
static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
memcpy(data, ecc, 3);
}
/*
* The actual driver starts here.
*/
/*
* On my 16MB card, control blocks have size 64 (16 real control bytes,
* and 48 junk bytes). In reality of course the card uses 16 control bytes,
* so the reader makes up the remaining 48. Don't know whether these numbers
* depend on the card. For now a constant.
*/
#define CONTROL_SHIFT 6
/*
* On my Combo CF/SM reader, the SM reader has LUN 1.
* (and things fail with LUN 0).
* It seems LUN is irrelevant for others.
*/
#define LUN 1
#define LUNBITS (LUN << 5)
/*
* LBA and PBA are unsigned ints. Special values.
*/
#define UNDEF 0xffffffff
#define SPARE 0xfffffffe
#define UNUSABLE 0xfffffffd
static int erase_bad_lba_entries = 0;
/*
* Send a control message and wait for the response.
*
......@@ -63,27 +231,18 @@
*
*/
static int sddr09_send_control(struct us_data *us,
int pipe,
unsigned char request,
unsigned char requesttype,
unsigned short value,
unsigned short index,
unsigned char *xfer_data,
unsigned int xfer_len) {
static int
sddr09_send_control(struct us_data *us,
int pipe,
unsigned char request,
unsigned char requesttype,
unsigned int value,
unsigned int index,
unsigned char *xfer_data,
unsigned int xfer_len) {
int result;
// If data is going to be sent or received with the URB,
// then allocate a buffer for it. If data is to be sent,
// copy the data into the buffer.
/*
if (xfer_len > 0) {
buffer = kmalloc(xfer_len, GFP_NOIO);
if (!(command[0] & USB_DIR_IN))
memcpy(buffer, xfer_data, xfer_len);
}
*/
// Send the URB to the device and wait for a response.
/* Why are request and request type reversed in this call? */
......@@ -93,16 +252,6 @@ static int sddr09_send_control(struct us_data *us,
xfer_data, xfer_len);
// If data was sent or received with the URB, free the buffer we
// allocated earlier, but not before reading the data out of the
// buffer if we wanted to receive data.
/*
if (xfer_len > 0) {
if (command[0] & USB_DIR_IN)
memcpy(xfer_data, buffer, xfer_len);
kfree(buffer);
}
*/
// Check the return code for the command.
if (result < 0) {
......@@ -118,17 +267,44 @@ static int sddr09_send_control(struct us_data *us,
return USB_STOR_TRANSPORT_FAILED;
}
/* Uh oh... serious problem here */
return USB_STOR_TRANSPORT_ERROR;
}
return USB_STOR_TRANSPORT_GOOD;
}
static int sddr09_raw_bulk(struct us_data *us,
int direction,
unsigned char *data,
unsigned int len) {
/* send vendor interface command (0x41) */
/* called for requests 0, 1, 8 */
static int
sddr09_send_command(struct us_data *us,
unsigned char request,
unsigned char direction,
unsigned char *xfer_data,
unsigned int xfer_len) {
int pipe;
unsigned char requesttype = (0x41 | direction);
// Get the receive or send control pipe number
if (direction == USB_DIR_IN)
pipe = usb_rcvctrlpipe(us->pusb_dev,0);
else
pipe = usb_sndctrlpipe(us->pusb_dev,0);
return sddr09_send_control(us, pipe, request, requesttype,
0, 0, xfer_data, xfer_len);
}
static int
sddr09_send_scsi_command(struct us_data *us,
unsigned char *command,
unsigned int command_len) {
return sddr09_send_command(us, 0, USB_DIR_OUT, command, command_len);
}
static int
sddr09_raw_bulk(struct us_data *us, int direction,
unsigned char *data, unsigned int len) {
int result;
int act_len;
......@@ -141,61 +317,46 @@ static int sddr09_raw_bulk(struct us_data *us,
result = usb_stor_bulk_msg(us, data, pipe, len, &act_len);
/* if we stall, we need to clear it before we go on */
if (result == -EPIPE) {
US_DEBUGP("EPIPE: clearing endpoint halt for"
" pipe 0x%x, stalled at %d bytes\n",
pipe, act_len);
usb_clear_halt(us->pusb_dev, pipe);
}
/* if we stall, we need to clear it before we go on */
if (result == -EPIPE) {
US_DEBUGP("EPIPE: clearing endpoint halt for"
" pipe 0x%x, stalled at %d bytes\n",
pipe, act_len);
usb_clear_halt(us->pusb_dev, pipe);
}
if (result) {
/* NAK - that means we've retried a few times already */
if (result == -ETIMEDOUT) {
US_DEBUGP("usbat_raw_bulk():"
" device NAKed\n");
return US_BULK_TRANSFER_FAILED;
}
/* -ENOENT -- we canceled this transfer */
if (result == -ENOENT) {
US_DEBUGP("usbat_raw_bulk():"
" transfer aborted\n");
return US_BULK_TRANSFER_ABORTED;
}
if (result == -EPIPE) {
US_DEBUGP("usbat_raw_bulk():"
" output pipe stalled\n");
return USB_STOR_TRANSPORT_FAILED;
/* -ENOENT -- we canceled this transfer */
if (result == -ENOENT) {
US_DEBUGP("usbat_raw_bulk(): transfer aborted\n");
return US_BULK_TRANSFER_ABORTED;
}
/* the catch-all case */
US_DEBUGP("us_transfer_partial(): unknown error\n");
return US_BULK_TRANSFER_FAILED;
}
/* NAK - that means we've retried a few times already */
if (result == -ETIMEDOUT)
US_DEBUGP("usbat_raw_bulk(): device NAKed\n");
else if (result == -EOVERFLOW)
US_DEBUGP("us_transfer_partial(): babble/overflow\n");
else if (result != -EPIPE)
US_DEBUGP("us_transfer_partial(): unknown error %d\n",
result);
return US_BULK_TRANSFER_FAILED;
}
if (act_len != len) {
US_DEBUGP("Warning: Transferred only %d bytes\n",
act_len);
US_DEBUGP("Warning: Transferred only %d of %d bytes\n",
act_len, len);
return US_BULK_TRANSFER_SHORT;
}
US_DEBUGP("Transferred %d of %d bytes\n", act_len, len);
return US_BULK_TRANSFER_GOOD;
}
/*
* Note: direction must be set if command_len == 0.
*/
static int sddr09_bulk_transport(struct us_data *us,
int direction,
unsigned char *data,
unsigned int len,
int use_sg) {
static int
sddr09_bulk_transport(struct us_data *us, int direction,
unsigned char *data, unsigned int len,
int use_sg) {
int result = USB_STOR_TRANSPORT_GOOD;
int transferred = 0;
......@@ -203,94 +364,473 @@ static int sddr09_bulk_transport(struct us_data *us,
struct scatterlist *sg;
char string[64];
if (len==0)
return USB_STOR_TRANSPORT_GOOD;
#define DEBUG_PRCT 12
/* transfer the data */
if (len == 0)
return USB_STOR_TRANSPORT_GOOD;
if (direction == SCSI_DATA_WRITE) {
if (direction == SCSI_DATA_WRITE && !use_sg) {
/* Debug-print the first 48 bytes of the write transfer */
/* Debug-print the first N bytes of the write transfer */
if (!use_sg) {
strcpy(string, "wr: ");
for (i=0; i<len && i<48; i++) {
sprintf(string+strlen(string), "%02X ",
data[i]);
if ((i%16)==15) {
US_DEBUGP("%s\n", string);
strcpy(string, "wr: ");
}
}
if ((i%16)!=0)
strcpy(string, "wr: ");
for (i=0; i<len && i<DEBUG_PRCT; i++) {
sprintf(string+strlen(string), "%02X ",
data[i]);
if ((i%16) == 15) {
US_DEBUGP("%s\n", string);
strcpy(string, "wr: ");
}
}
if ((i%16)!=0)
US_DEBUGP("%s\n", string);
}
US_DEBUGP("SCM data %s transfer %d sg buffers %d\n",
( direction==SCSI_DATA_READ ? "in" : "out"),
(direction == SCSI_DATA_READ) ? "in" : "out",
len, use_sg);
if (!use_sg)
result = sddr09_raw_bulk(us, direction, data, len);
else {
sg = (struct scatterlist *)data;
for (i=0; i<use_sg && transferred<len; i++) {
result = sddr09_raw_bulk(us, direction,
page_address(sg[i].page) + sg[i].offset,
len-transferred > sg[i].length ?
sg[i].length : len-transferred);
if (result!=US_BULK_TRANSFER_GOOD)
unsigned char *buf;
unsigned int length;
buf = page_address(sg[i].page) + sg[i].offset;
length = len-transferred;
if (length > sg[i].length)
length = sg[i].length;
result = sddr09_raw_bulk(us, direction, buf, length);
if (result != US_BULK_TRANSFER_GOOD)
break;
transferred += sg[i].length;
}
}
if (direction == SCSI_DATA_READ) {
if (direction == SCSI_DATA_READ && !use_sg) {
/* Debug-print the first 48 bytes of the read transfer */
/* Debug-print the first N bytes of the read transfer */
if (!use_sg) {
strcpy(string, "rd: ");
for (i=0; i<len && i<48; i++) {
sprintf(string+strlen(string), "%02X ",
data[i]);
if ((i%16)==15) {
US_DEBUGP("%s\n", string);
strcpy(string, "rd: ");
}
}
if ((i%16)!=0)
strcpy(string, "rd: ");
for (i=0; i<len && i<DEBUG_PRCT; i++) {
sprintf(string+strlen(string), "%02X ",
data[i]);
if ((i%16) == 15) {
US_DEBUGP("%s\n", string);
strcpy(string, "rd: ");
}
}
if ((i%16)!=0)
US_DEBUGP("%s\n", string);
}
return result;
}
int sddr09_read_data(struct us_data *us,
unsigned long address,
unsigned short sectors,
unsigned char *content,
int use_sg) {
#if 0
/*
* Test Unit Ready Command: 12 bytes.
* byte 0: opcode: 00
*/
static int
sddr09_test_unit_ready(struct us_data *us) {
unsigned char command[6] = {
0, LUNBITS, 0, 0, 0, 0
};
int result;
result = sddr09_send_scsi_command(us, command, sizeof(command));
US_DEBUGP("sddr09_test_unit_ready returns %d\n", result);
return result;
}
#endif
/*
* Request Sense Command: 12 bytes.
* byte 0: opcode: 03
* byte 4: data length
*/
static int
sddr09_request_sense(struct us_data *us, unsigned char *sensebuf, int buflen) {
unsigned char command[12] = {
0x03, LUNBITS, 0, 0, buflen, 0, 0, 0, 0, 0, 0, 0
};
int result;
result = sddr09_send_scsi_command(us, command, sizeof(command));
if (result != USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("request sense failed\n");
return result;
}
result = sddr09_raw_bulk(us, SCSI_DATA_READ, sensebuf, buflen);
if (result != USB_STOR_TRANSPORT_GOOD)
US_DEBUGP("request sense bulk in failed\n");
else
US_DEBUGP("request sense worked\n");
return result;
}
/*
* Read Command: 12 bytes.
* byte 0: opcode: E8
* byte 1: last two bits: 00: read data, 01: read blockwise control,
* 10: read both, 11: read pagewise control.
* It turns out we need values 20, 21, 22, 23 here (LUN 1).
* bytes 2-5: address (interpretation depends on byte 1, see below)
* bytes 10-11: count (idem)
*
* A page has 512 data bytes and 64 control bytes (16 control and 48 junk).
* A read data command gets data in 512-byte pages.
* A read control command gets control in 64-byte chunks.
* A read both command gets data+control in 576-byte chunks.
*
* Blocks are groups of 32 pages, and read blockwise control jumps to the
* next block, while read pagewise control jumps to the next page after
* reading a group of 64 control bytes.
* [Here 512 = 1<<pageshift, 32 = 1<<blockshift, 64 is constant?]
*
* (1 MB and 2 MB cards are a bit different, but I have only a 16 MB card.)
*/
static int
sddr09_readX(struct us_data *us, int x, unsigned long fromaddress,
int nr_of_pages, int bulklen, unsigned char *buf,
int use_sg) {
unsigned char command[12] = {
0xe8, LUNBITS | x, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
int result;
command[2] = MSB_of(fromaddress>>16);
command[3] = LSB_of(fromaddress>>16);
command[4] = MSB_of(fromaddress & 0xFFFF);
command[5] = LSB_of(fromaddress & 0xFFFF);
command[10] = MSB_of(nr_of_pages);
command[11] = LSB_of(nr_of_pages);
result = sddr09_send_scsi_command(us, command, sizeof(command));
if (result != USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("Result for send_control in sddr09_read2%d %d\n",
x, result);
return result;
}
result = sddr09_bulk_transport(us, SCSI_DATA_READ,
buf, bulklen, use_sg);
if (result != USB_STOR_TRANSPORT_GOOD)
US_DEBUGP("Result for bulk_transport in sddr09_read2%d %d\n",
x, result);
return result;
}
/*
* Read Data
*
* fromaddress counts data shorts:
* increasing it by 256 shifts the bytestream by 512 bytes;
* the last 8 bits are ignored.
*
* nr_of_pages counts pages of size (1 << pageshift).
*/
static int
sddr09_read20(struct us_data *us, unsigned long fromaddress,
int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) {
int bulklen = nr_of_pages << pageshift;
/* The last 8 bits of fromaddress are ignored. */
return sddr09_readX(us, 0, fromaddress, nr_of_pages, bulklen,
buf, use_sg);
}
/*
* Read Blockwise Control
*
* fromaddress gives the starting position (as in read data;
* the last 8 bits are ignored); increasing it by 32*256 shifts
* the output stream by 64 bytes.
*
* count counts control groups of size (1 << controlshift).
* For me, controlshift = 6. Is this constant?
*
* After getting one control group, jump to the next block
* (fromaddress += 8192).
*/
static int
sddr09_read21(struct us_data *us, unsigned long fromaddress,
int count, int controlshift, unsigned char *buf, int use_sg) {
int bulklen = (count << controlshift);
return sddr09_readX(us, 1, fromaddress, count, bulklen,
buf, use_sg);
}
/*
* Read both Data and Control
*
* fromaddress counts data shorts, ignoring control:
* increasing it by 256 shifts the bytestream by 576 = 512+64 bytes;
* the last 8 bits are ignored.
*
* nr_of_pages counts pages of size (1 << pageshift) + (1 << controlshift).
*/
static int
sddr09_read22(struct us_data *us, unsigned long fromaddress,
int nr_of_pages, int pageshift, unsigned char *buf, int use_sg) {
int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT);
US_DEBUGP("sddr09_read22: reading %d pages, %d bytes\n",
nr_of_pages, bulklen);
return sddr09_readX(us, 2, fromaddress, nr_of_pages, bulklen,
buf, use_sg);
}
#if 0
/*
* Read Pagewise Control
*
* fromaddress gives the starting position (as in read data;
* the last 8 bits are ignored); increasing it by 256 shifts
* the output stream by 64 bytes.
*
* count counts control groups of size (1 << controlshift).
* For me, controlshift = 6. Is this constant?
*
* After getting one control group, jump to the next page
* (fromaddress += 256).
*/
static int
sddr09_read23(struct us_data *us, unsigned long fromaddress,
int count, int controlshift, unsigned char *buf, int use_sg) {
int bulklen = (count << controlshift);
return sddr09_readX(us, 3, fromaddress, count, bulklen,
buf, use_sg);
}
#endif
/*
* Erase Command: 12 bytes.
* byte 0: opcode: EA
* bytes 6-9: erase address (big-endian, counting shorts, sector aligned).
*
* Always precisely one block is erased; bytes 2-5 and 10-11 are ignored.
* The byte address being erased is 2*Eaddress.
*/
static int
sddr09_erase(struct us_data *us, unsigned long Eaddress) {
unsigned char command[12] = {
0xea, LUNBITS, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
int result;
command[6] = MSB_of(Eaddress>>16);
command[7] = LSB_of(Eaddress>>16);
command[8] = MSB_of(Eaddress & 0xFFFF);
command[9] = LSB_of(Eaddress & 0xFFFF);
result = sddr09_send_scsi_command(us, command, sizeof(command));
if (result != USB_STOR_TRANSPORT_GOOD)
US_DEBUGP("Result for send_control in sddr09_erase %d\n",
result);
return result;
}
/*
* Write Command: 12 bytes.
* byte 0: opcode: E9
* bytes 2-5: write address (big-endian, counting shorts, sector aligned).
* bytes 6-9: erase address (big-endian, counting shorts, sector aligned).
* bytes 10-11: sector count (big-endian, in 512-byte sectors).
*
* If write address equals erase address, the erase is done first,
* otherwise the write is done first. When erase address equals zero
* no erase is done?
*/
static int
sddr09_writeX(struct us_data *us,
unsigned long Waddress, unsigned long Eaddress,
int nr_of_pages, int bulklen, unsigned char *buf, int use_sg) {
unsigned char command[12] = {
0xe8, 0x20, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
0xe9, LUNBITS, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
struct sddr09_card_info *info = (struct sddr09_card_info *)us->extra;
unsigned int lba;
unsigned int pba;
unsigned short page;
unsigned short pages;
int result;
command[2] = MSB_of(Waddress>>16);
command[3] = LSB_of(Waddress>>16);
command[4] = MSB_of(Waddress & 0xFFFF);
command[5] = LSB_of(Waddress & 0xFFFF);
command[6] = MSB_of(Eaddress>>16);
command[7] = LSB_of(Eaddress>>16);
command[8] = MSB_of(Eaddress & 0xFFFF);
command[9] = LSB_of(Eaddress & 0xFFFF);
command[10] = MSB_of(nr_of_pages);
command[11] = LSB_of(nr_of_pages);
result = sddr09_send_scsi_command(us, command, sizeof(command));
if (result != USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("Result for send_control in sddr09_writeX %d\n",
result);
return result;
}
result = sddr09_bulk_transport(us, SCSI_DATA_WRITE,
buf, bulklen, use_sg);
if (result != USB_STOR_TRANSPORT_GOOD)
US_DEBUGP("Result for bulk_transport in sddr09_writeX %d\n",
result);
return result;
}
/* erase address, write same address */
static int
sddr09_write_inplace(struct us_data *us, unsigned long address,
int nr_of_pages, int pageshift, unsigned char *buf,
int use_sg) {
int bulklen = (nr_of_pages << pageshift) + (nr_of_pages << CONTROL_SHIFT);
return sddr09_writeX(us, address, address, nr_of_pages, bulklen,
buf, use_sg);
}
#if 0
/*
* Read Scatter Gather Command: 3+4n bytes.
* byte 0: opcode E7
* byte 2: n
* bytes 4i-1,4i,4i+1: page address
* byte 4i+2: page count
* (i=1..n)
*
* This reads several pages from the card to a single memory buffer.
* The last two bits of byte 1 have the same meaning as for E8.
*/
static int
sddr09_read_sg_test_only(struct us_data *us) {
unsigned char command[15] = {
0xe7, LUNBITS, 0
};
int result, bulklen, nsg, ct;
unsigned char *buf;
unsigned long address;
nsg = bulklen = 0;
address = 040000; ct = 1;
nsg++;
bulklen += (ct << 9);
command[4*nsg+2] = ct;
command[4*nsg+1] = ((address >> 9) & 0xFF);
command[4*nsg+0] = ((address >> 17) & 0xFF);
command[4*nsg-1] = ((address >> 25) & 0xFF);
address = 0340000; ct = 1;
nsg++;
bulklen += (ct << 9);
command[4*nsg+2] = ct;
command[4*nsg+1] = ((address >> 9) & 0xFF);
command[4*nsg+0] = ((address >> 17) & 0xFF);
command[4*nsg-1] = ((address >> 25) & 0xFF);
address = 01000000; ct = 2;
nsg++;
bulklen += (ct << 9);
command[4*nsg+2] = ct;
command[4*nsg+1] = ((address >> 9) & 0xFF);
command[4*nsg+0] = ((address >> 17) & 0xFF);
command[4*nsg-1] = ((address >> 25) & 0xFF);
command[2] = nsg;
result = sddr09_send_scsi_command(us, command, 4*nsg+3);
if (result != USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("Result for send_control in sddr09_read_sg %d\n",
result);
return result;
}
buf = (unsigned char *) kmalloc(bulklen, GFP_NOIO);
if (!buf)
return USB_STOR_TRANSPORT_ERROR;
result = sddr09_bulk_transport(us, SCSI_DATA_READ,
buf, bulklen, 0);
if (result != USB_STOR_TRANSPORT_GOOD)
US_DEBUGP("Result for bulk_transport in sddr09_read_sg %d\n",
result);
kfree(buf);
return result;
}
#endif
/*
* Read Status Command: 12 bytes.
* byte 0: opcode: EC
*
* Returns 64 bytes, all zero except for the first.
* bit 0: 1: Error
* bit 5: 1: Suspended
* bit 6: 1: Ready
* bit 7: 1: Not write-protected
*/
static int
sddr09_read_status(struct us_data *us, unsigned char *status) {
unsigned char command[12] = {
0xec, LUNBITS, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
unsigned char data[64];
int result;
US_DEBUGP("Reading status...\n");
result = sddr09_send_scsi_command(us, command, sizeof(command));
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
result = sddr09_bulk_transport(us, SCSI_DATA_READ,
data, sizeof(data), 0);
*status = data[0];
return result;
}
static int
sddr09_read_data(struct us_data *us,
unsigned long address,
unsigned int sectors,
unsigned char *content,
int use_sg) {
struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
unsigned int lba, maxlba, pba;
unsigned int page, pages;
unsigned char *buffer = NULL;
unsigned char *ptr;
struct scatterlist *sg = NULL;
int i;
int len;
int transferred;
int result, i, len;
// If we're using scatter-gather, we have to create a new
// buffer to read all of the data in first, since a
......@@ -311,68 +851,57 @@ int sddr09_read_data(struct us_data *us,
ptr = content;
// Figure out the initial LBA and page
pba = address >> (info->pageshift + info->blockshift);
lba = info->pba_to_lba[pba];
page = (address >> info->pageshift) & info->blockmask;
lba = address >> info->blockshift;
page = (address & info->blockmask);
maxlba = info->capacity >> (info->pageshift + info->blockshift);
// This could be made much more efficient by checking for
// contiguous LBA's. Another exercise left to the student.
while (sectors>0) {
pba = info->lba_to_pba[lba];
result = USB_STOR_TRANSPORT_GOOD;
// Read as many sectors as possible in this block
while (sectors > 0) {
/* Find number of pages we can read in this block */
pages = info->blocksize - page;
if (pages > sectors)
pages = sectors;
US_DEBUGP("Read %02X pages, from PBA %04X"
" (LBA %04X) page %02X\n",
pages, pba, lba, page);
address = ( (pba << info->blockshift) + page ) <<
info->pageshift;
/* Not overflowing capacity? */
if (lba >= maxlba) {
US_DEBUGP("Error: Requested lba %u exceeds "
"maximum %u\n", lba, maxlba);
result = USB_STOR_TRANSPORT_ERROR;
break;
}
// Unlike in the documentation, the address is in
// words of 2 bytes.
/* Find where this lba lives on disk */
pba = info->lba_to_pba[lba];
command[2] = MSB_of(address>>17);
command[3] = LSB_of(address>>17);
command[4] = MSB_of((address>>1)&0xFFFF);
command[5] = LSB_of((address>>1)&0xFFFF);
if (pba == UNDEF) { /* this lba was never written */
command[10] = MSB_of(pages);
command[11] = LSB_of(pages);
US_DEBUGP("Read %d zero pages (LBA %d) page %d\n",
pages, lba, page);
result = sddr09_send_control(us,
usb_sndctrlpipe(us->pusb_dev,0),
0,
0x41,
0,
0,
command,
12);
/* This is not really an error. It just means
that the block has never been written.
Instead of returning USB_STOR_TRANSPORT_ERROR
it is better to return all zero data. */
US_DEBUGP("Result for send_control in read_data %d\n",
result);
memset(ptr, 0, pages << info->pageshift);
if (result != USB_STOR_TRANSPORT_GOOD) {
if (use_sg)
kfree(buffer);
return result;
}
} else {
US_DEBUGP("Read %d pages, from PBA %d"
" (LBA %d) page %d\n",
pages, pba, lba, page);
result = sddr09_bulk_transport(us,
SCSI_DATA_READ, ptr,
pages<<info->pageshift, 0);
address = ((pba << info->blockshift) + page) <<
info->pageshift;
if (result != USB_STOR_TRANSPORT_GOOD) {
if (use_sg)
kfree(buffer);
return result;
result = sddr09_read20(us, address>>1,
pages, info->pageshift, ptr, 0);
if (result != USB_STOR_TRANSPORT_GOOD)
break;
}
page = 0;
......@@ -381,234 +910,395 @@ int sddr09_read_data(struct us_data *us,
ptr += (pages << info->pageshift);
}
if (use_sg) {
transferred = 0;
if (use_sg && result == USB_STOR_TRANSPORT_GOOD) {
int transferred = 0;
for (i=0; i<use_sg && transferred<len; i++) {
memcpy(page_address(sg[i].page) + sg[i].offset, buffer+transferred,
len-transferred > sg[i].length ?
sg[i].length : len-transferred);
unsigned char *buf;
unsigned int length;
buf = page_address(sg[i].page) + sg[i].offset;
length = len-transferred;
if (length > sg[i].length)
length = sg[i].length;
memcpy(buf, buffer+transferred, length);
transferred += sg[i].length;
}
kfree(buffer);
}
return USB_STOR_TRANSPORT_GOOD;
}
if (use_sg)
kfree(buffer);
int sddr09_read_control(struct us_data *us,
unsigned long address,
unsigned short blocks,
unsigned char *content,
int use_sg) {
return result;
}
// Unlike in the documentation, the last two bytes are the
// number of blocks, not sectors.
/* we never free blocks, so lastpba can only increase */
static unsigned int
sddr09_find_unused_pba(struct sddr09_card_info *info) {
static unsigned int lastpba = 1;
int numblocks = info->capacity >> (info->blockshift + info->pageshift);
int i;
int result;
unsigned char command[12] = {
0xe8, 0x21, MSB_of(address>>16),
LSB_of(address>>16), MSB_of(address&0xFFFF),
LSB_of(address&0xFFFF), 0, 0, 0, 0,
MSB_of(blocks), LSB_of(blocks)
};
for (i = lastpba+1; i < numblocks; i++) {
if (info->pba_to_lba[i] == UNDEF) {
lastpba = i;
return i;
}
}
return 0;
}
US_DEBUGP("Read control address %08lX blocks %04X\n",
address, blocks);
static int
sddr09_write_lba(struct us_data *us, unsigned int lba,
unsigned int page, unsigned int pages,
unsigned char *ptr) {
struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
unsigned long address;
unsigned int pba, lbap;
unsigned int pagelen, blocklen;
unsigned char *blockbuffer, *bptr, *cptr, *xptr;
unsigned char ecc[3];
int i, result;
lbap = ((lba & 0x3ff) << 1) | 0x1000;
if (parity[MSB_of(lbap) ^ LSB_of(lbap)])
lbap ^= 1;
pba = info->lba_to_pba[lba];
if (pba == UNDEF) {
pba = sddr09_find_unused_pba(info);
if (!pba) {
printk("sddr09_write_lba: Out of unused blocks\n");
return USB_STOR_TRANSPORT_ERROR;
}
info->pba_to_lba[pba] = lba;
info->lba_to_pba[lba] = pba;
}
result = sddr09_send_control(us,
usb_sndctrlpipe(us->pusb_dev,0),
0,
0x41,
0,
0,
command,
12);
if (pba == 1) {
/* Maybe it is impossible to write to PBA 1.
Fake success, but don't do anything. */
printk("sddr09: avoid writing to pba 1\n");
return USB_STOR_TRANSPORT_GOOD;
}
US_DEBUGP("Result for send_control in read_control %d\n",
result);
pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
blocklen = (pagelen << info->blockshift);
blockbuffer = kmalloc(blocklen, GFP_NOIO);
if (!blockbuffer) {
printk("sddr09_write_lba: Out of memory\n");
return USB_STOR_TRANSPORT_ERROR;
}
/* read old contents */
address = (pba << (info->pageshift + info->blockshift));
result = sddr09_read22(us, address>>1, info->blocksize,
info->pageshift, blockbuffer, 0);
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
goto err;
/* check old contents */
for (i = 0; i < info->blockshift; i++) {
bptr = blockbuffer + i*pagelen;
cptr = bptr + info->pagesize;
nand_compute_ecc(bptr, ecc);
if (!nand_compare_ecc(cptr+13, ecc)) {
US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n",
i, pba);
nand_store_ecc(cptr+13, ecc);
}
nand_compute_ecc(bptr+(info->pagesize / 2), ecc);
if (!nand_compare_ecc(cptr+8, ecc)) {
US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n",
i, pba);
nand_store_ecc(cptr+8, ecc);
}
}
/* copy in new stuff and compute ECC */
xptr = ptr;
for (i = page; i < page+pages; i++) {
bptr = blockbuffer + i*pagelen;
cptr = bptr + info->pagesize;
memcpy(bptr, xptr, info->pagesize);
xptr += info->pagesize;
nand_compute_ecc(bptr, ecc);
nand_store_ecc(cptr+13, ecc);
nand_compute_ecc(bptr+(info->pagesize / 2), ecc);
nand_store_ecc(cptr+8, ecc);
cptr[6] = cptr[11] = MSB_of(lbap);
cptr[7] = cptr[12] = LSB_of(lbap);
}
US_DEBUGP("Rewrite PBA %d (LBA %d)\n", pba, lba);
result = sddr09_bulk_transport(us,
SCSI_DATA_READ, content,
blocks<<6, use_sg); // 0x40 bytes per block
result = sddr09_write_inplace(us, address>>1, info->blocksize,
info->pageshift, blockbuffer, 0);
US_DEBUGP("Result for bulk read in read_control %d\n",
result);
US_DEBUGP("sddr09_write_inplace returns %d\n", result);
#if 0
{
unsigned char status = 0;
int result2 = sddr09_read_status(us, &status);
if (result2 != USB_STOR_TRANSPORT_GOOD)
US_DEBUGP("sddr09_write_inplace: cannot read status\n");
else if (status != 0xc0)
US_DEBUGP("sddr09_write_inplace: status after write: 0x%x\n",
status);
}
#endif
#if 0
{
int result2 = sddr09_test_unit_ready(us);
}
#endif
err:
kfree(blockbuffer);
/* TODO: instead of doing kmalloc/kfree for each block,
add a bufferpointer to the info structure */
return result;
}
int sddr09_read_deviceID(struct us_data *us,
unsigned char *manufacturerID,
unsigned char *deviceID) {
static int
sddr09_write_data(struct us_data *us,
unsigned long address,
unsigned int sectors,
unsigned char *content,
int use_sg) {
int result;
unsigned char command[12] = {
0xed, 0x20, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
unsigned char content[64];
struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
unsigned int lba, page, pages;
unsigned char *buffer = NULL;
unsigned char *ptr;
struct scatterlist *sg = NULL;
int result, i, len;
result = sddr09_send_control(us,
usb_sndctrlpipe(us->pusb_dev,0),
0,
0x41,
0,
0,
command,
12);
// If we're using scatter-gather, we have to create a new
// buffer to write all of the data in first, since a
// scatter-gather buffer could in theory start in the middle
// of a page, which would be bad. A developer who wants a
// challenge might want to write a limited-buffer
// version of this code.
US_DEBUGP("Result of send_control for device ID is %d\n",
result);
len = sectors*info->pagesize;
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
if (use_sg) {
int transferred = 0;
result = sddr09_bulk_transport(us,
SCSI_DATA_READ, content,
64, 0);
sg = (struct scatterlist *)content;
buffer = kmalloc(len, GFP_NOIO);
if (buffer == NULL)
return USB_STOR_TRANSPORT_ERROR;
*manufacturerID = content[0];
*deviceID = content[1];
for (i=0; i<use_sg && transferred<len; i++) {
unsigned char *buf;
unsigned int length;
return result;
}
buf = page_address(sg[i].page) + sg[i].offset;
int sddr09_read_status(struct us_data *us,
unsigned char *status) {
length = len-transferred;
if (length > sg[i].length)
length = sg[i].length;
int result;
unsigned char command[12] = {
0xec, 0x20, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
memcpy(buffer+transferred, buf, length);
transferred += sg[i].length;
}
ptr = buffer;
} else
ptr = content;
result = sddr09_send_control(us,
usb_sndctrlpipe(us->pusb_dev,0),
0,
0x41,
0,
0,
command,
12);
// Figure out the initial LBA and page
lba = address >> info->blockshift;
page = (address & info->blockmask);
if (result != USB_STOR_TRANSPORT_GOOD)
return result;
// This could be made much more efficient by checking for
// contiguous LBA's. Another exercise left to the student.
result = sddr09_bulk_transport(us,
SCSI_DATA_READ, status,
1, 0);
result = USB_STOR_TRANSPORT_GOOD;
return result;
}
while (sectors > 0) {
int sddr09_reset(struct us_data *us) {
// Write as many sectors as possible in this block
int result;
unsigned char command[12] = {
0xeb, 0x20, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
pages = info->blocksize - page;
if (pages > sectors)
pages = sectors;
result = sddr09_write_lba(us, lba, page, pages, ptr);
if (result != USB_STOR_TRANSPORT_GOOD)
break;
page = 0;
lba++;
sectors -= pages;
ptr += (pages << info->pageshift);
}
result = sddr09_send_control(us,
usb_sndctrlpipe(us->pusb_dev,0),
0,
0x41,
0,
0,
command,
12);
if (use_sg)
kfree(buffer);
return result;
}
unsigned long sddr09_get_capacity(struct us_data *us,
unsigned int *pagesize, unsigned int *blocksize) {
unsigned char manufacturerID;
unsigned char deviceID;
int result;
static int
sddr09_read_control(struct us_data *us,
unsigned long address,
unsigned int blocks,
unsigned char *content,
int use_sg) {
US_DEBUGP("Reading capacity...\n");
US_DEBUGP("Read control address %08lX blocks %04X\n",
address, blocks);
result = sddr09_read_deviceID(us,
&manufacturerID,
&deviceID);
return sddr09_read21(us, address, blocks, CONTROL_SHIFT, content, use_sg);
}
US_DEBUGP("Result of read_deviceID is %d\n",
result);
/*
* Read Device ID Command: 12 bytes.
* byte 0: opcode: ED
*
* Returns 2 bytes: Manufacturer ID and Device ID.
* On more recent cards 3 bytes: the third byte is an option code A5
* signifying that the secret command to read an 128-bit ID is available.
* On still more recent cards 4 bytes: the fourth byte C0 means that
* a second read ID cmd is available.
*/
static int
sddr09_read_deviceID(struct us_data *us, unsigned char *deviceID) {
unsigned char command[12] = {
0xed, LUNBITS, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
unsigned char content[64];
int result, i;
result = sddr09_send_scsi_command(us, command, sizeof(command));
if (result != USB_STOR_TRANSPORT_GOOD)
return 0;
return result;
US_DEBUGP("Device ID = %02X\n", deviceID);
US_DEBUGP("Manuf ID = %02X\n", manufacturerID);
result = sddr09_bulk_transport(us, SCSI_DATA_READ, content, 64, 0);
*pagesize = 512;
*blocksize = 16;
for (i = 0; i < 4; i++)
deviceID[i] = content[i];
switch (deviceID) {
return result;
}
case 0x6e: // 1MB
case 0xe8:
case 0xec:
*pagesize = 256;
return 0x00100000;
static int
sddr09_get_wp(struct us_data *us, struct sddr09_card_info *info) {
int result;
unsigned char status;
case 0xea: // 2MB
case 0x5d: // 5d is a ROM card with pagesize 512.
case 0x64:
if (deviceID!=0x5D)
*pagesize = 256;
return 0x00200000;
result = sddr09_read_status(us, &status);
if (result != USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("sddr09_get_wp: read_status fails\n");
return result;
}
US_DEBUGP("sddr09_get_wp: status %02X", status);
if ((status & 0x80) == 0) {
info->flags |= SDDR09_WP; /* write protected */
US_DEBUGP(" WP");
}
if (status & 0x40)
US_DEBUGP(" Ready");
if (status & LUNBITS)
US_DEBUGP(" Suspended");
if (status & 0x1)
US_DEBUGP(" Error");
US_DEBUGP("\n");
return USB_STOR_TRANSPORT_GOOD;
}
case 0xe3: // 4MB
case 0xe5:
case 0x6b:
case 0xd5:
return 0x00400000;
#if 0
/*
* Reset Command: 12 bytes.
* byte 0: opcode: EB
*/
static int
sddr09_reset(struct us_data *us) {
case 0xe6: // 8MB
case 0xd6:
return 0x00800000;
unsigned char command[12] = {
0xeb, LUNBITS, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
};
case 0x73: // 16MB
*blocksize = 32;
return 0x01000000;
return sddr09_send_scsi_command(us, command, sizeof(command));
}
#endif
case 0x75: // 32MB
*blocksize = 32;
return 0x02000000;
static struct nand_flash_dev *
sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
struct nand_flash_dev *cardinfo;
unsigned char deviceID[4];
char blurbtxt[256];
int result;
case 0x76: // 64MB
*blocksize = 32;
return 0x04000000;
US_DEBUGP("Reading capacity...\n");
case 0x79: // 128MB
*blocksize = 32;
return 0x08000000;
result = sddr09_read_deviceID(us, deviceID);
default: // unknown
if (result != USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("Result of read_deviceID is %d\n", result);
printk("sddr09: could not read card info\n");
return 0;
}
sprintf(blurbtxt, "sddr09: Found Flash card, ID = %02X %02X %02X %02X",
deviceID[0], deviceID[1], deviceID[2], deviceID[3]);
/* Byte 0 is the manufacturer */
sprintf(blurbtxt + strlen(blurbtxt),
": Manuf. %s",
nand_flash_manufacturer(deviceID[0]));
/* Byte 1 is the device type */
cardinfo = nand_find_id(deviceID[1]);
if (cardinfo) {
/* MB or MiB? It is neither. A 16 MB card has
17301504 raw bytes, of which 16384000 are
usable for user data. */
sprintf(blurbtxt + strlen(blurbtxt),
", %d MB", 1<<(cardinfo->chipshift - 20));
} else {
sprintf(blurbtxt + strlen(blurbtxt),
", type unrecognized");
}
/* Byte 2 is code to signal availability of 128-bit ID */
if (deviceID[2] == 0xa5) {
sprintf(blurbtxt + strlen(blurbtxt),
", 128-bit ID");
}
/* Byte 3 announces the availability of another read ID command */
if (deviceID[3] == 0xc0) {
sprintf(blurbtxt + strlen(blurbtxt),
", extra cmd");
}
if (flags & SDDR09_WP)
sprintf(blurbtxt + strlen(blurbtxt),
", WP");
printk("%s\n", blurbtxt);
return cardinfo;
}
int sddr09_read_map(struct us_data *us) {
static int
sddr09_read_map(struct us_data *us) {
struct scatterlist *sg;
struct sddr09_card_info *info = (struct sddr09_card_info *)(us->extra);
int numblocks;
int i;
struct sddr09_card_info *info = (struct sddr09_card_info *) us->extra;
int numblocks, alloc_len, alloc_blocks;
int i, j, result;
unsigned char *ptr;
unsigned short lba;
unsigned char parity;
unsigned char fast_parity[16] = {
0, 1, 1, 0, 1, 0, 0, 1,
1, 0, 0, 1, 0, 1, 1, 0
};
int result;
int alloc_len;
int alloc_blocks;
unsigned int lba, lbact;
if (!info->capacity)
return -1;
......@@ -621,7 +1311,7 @@ int sddr09_read_map(struct us_data *us) {
// capacity>>(b+p-6)
alloc_len = info->capacity >>
(info->blockshift + info->pageshift - 6);
(info->blockshift + info->pageshift - CONTROL_SHIFT);
// Allocate a number of scatterlist structures according to
// the number of 128k blocks in the alloc_len. Adding 128k-1
......@@ -630,7 +1320,7 @@ int sddr09_read_map(struct us_data *us) {
alloc_blocks = (alloc_len + (1<<17) - 1) >> 17;
sg = kmalloc(alloc_blocks*sizeof(struct scatterlist),
GFP_NOIO);
GFP_NOIO);
if (sg == NULL)
return 0;
......@@ -660,29 +1350,23 @@ int sddr09_read_map(struct us_data *us) {
numblocks = info->capacity >> (info->blockshift + info->pageshift);
if ( (result = sddr09_read_control(us, 0, numblocks,
(unsigned char *)sg, alloc_blocks)) !=
USB_STOR_TRANSPORT_GOOD) {
result = sddr09_read_control(us, 0, numblocks,
(unsigned char *)sg, alloc_blocks);
if (result != USB_STOR_TRANSPORT_GOOD) {
for (i=0; i<alloc_blocks; i++)
kfree(page_address(sg[i].page) + sg[i].offset);
kfree(sg);
return -1;
}
if (info->lba_to_pba)
kfree(info->lba_to_pba);
if (info->pba_to_lba)
kfree(info->pba_to_lba);
kfree(info->lba_to_pba);
kfree(info->pba_to_lba);
info->lba_to_pba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO);
if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) {
if (info->lba_to_pba != NULL)
kfree(info->lba_to_pba);
if (info->pba_to_lba != NULL)
kfree(info->pba_to_lba);
kfree(info->lba_to_pba);
kfree(info->pba_to_lba);
info->lba_to_pba = NULL;
info->pba_to_lba = NULL;
for (i=0; i<alloc_blocks; i++)
......@@ -691,64 +1375,137 @@ int sddr09_read_map(struct us_data *us) {
return 0;
}
memset(info->lba_to_pba, 0, numblocks*sizeof(int));
memset(info->pba_to_lba, 0, numblocks*sizeof(int));
for (i = 0; i < numblocks; i++)
info->lba_to_pba[i] = info->pba_to_lba[i] = UNDEF;
ptr = page_address(sg[0].page)+sg[0].offset;
/*
* Define lba-pba translation table
*/
// Each block is 64 bytes of control data, so block i is located in
// scatterlist block i*64/128k = i*(2^6)*(2^-17) = i*(2^-11)
#if 0
/* No translation */
for (i=0; i<numblocks; i++) {
ptr = page_address(sg[i>>11].page)+sg[i>>11].offset+((i&0x7ff)<<6);
if (ptr[0]!=0xFF || ptr[1]!=0xFF || ptr[2]!=0xFF ||
ptr[3]!=0xFF || ptr[4]!=0xFF || ptr[5]!=0xFF) {
US_DEBUGP("PBA %04X has no logical mapping: reserved area = "
"%02X%02X%02X%02X data status %02X block status %02X\n",
i, ptr[0], ptr[1], ptr[2], ptr[3], ptr[4], ptr[5]);
lba = i;
info->pba_to_lba[i] = lba;
info->lba_to_pba[lba] = i;
}
printk("sddr09: no translation today\n");
#else
for (i=0; i<numblocks; i++) {
ptr = page_address(sg[i>>11].page) +
sg[i>>11].offset + ((i&0x7ff)<<6);
if (i == 0 || i == 1) {
info->pba_to_lba[i] = UNUSABLE;
continue;
}
if ((ptr[6]>>4)!=0x01) {
US_DEBUGP("PBA %04X has invalid address field %02X%02X/%02X%02X\n",
i, ptr[6], ptr[7], ptr[11], ptr[12]);
/* special PBAs have control field 0^16 */
for (j = 0; j < 16; j++)
if (ptr[j] != 0)
goto nonz;
info->pba_to_lba[i] = UNUSABLE;
printk("sddr09: PBA %04X has no logical mapping\n", i);
continue;
nonz:
/* unwritten PBAs have control field FF^16 */
for (j = 0; j < 16; j++)
if (ptr[j] != 0xff)
goto nonff;
continue;
nonff:
/* normal PBAs start with six FFs */
if (j < 6) {
printk("sddr09: PBA %04X has no logical mapping: "
"reserved area = %02X%02X%02X%02X "
"data status %02X block status %02X\n",
i, ptr[0], ptr[1], ptr[2], ptr[3],
ptr[4], ptr[5]);
info->pba_to_lba[i] = UNUSABLE;
continue;
}
/* ensure even parity */
lba = short_pack(ptr[7], ptr[6]);
parity = 1; // the parity of 0x1000
parity ^= fast_parity[lba & 0x000F];
parity ^= fast_parity[(lba>>4) & 0x000F];
parity ^= fast_parity[(lba>>8) & 0x000F];
if (parity) { /* bad parity bit */
US_DEBUGP("Bad parity in LBA for block %04X\n", i);
if ((ptr[6] >> 4) != 0x01) {
printk("sddr09: PBA %04X has invalid address field "
"%02X%02X/%02X%02X\n",
i, ptr[6], ptr[7], ptr[11], ptr[12]);
info->pba_to_lba[i] = UNUSABLE;
continue;
}
lba = (lba&0x07FF)>>1;
/* Every 1024 physical blocks ("zone"), the LBA numbers
* go back to zero, but are within a higher
* block of LBA's. Also, there is a maximum of
* 1000 LBA's per zone. In other words, in PBA
* 1024-2047 you will find LBA 0-999 which are
* really LBA 1000-1999. Yes, this wastes 24
* physical blocks per zone. Go figure.
*/
lba += 1000*(i/0x400);
/* check even parity */
if (parity[ptr[6] ^ ptr[7]]) {
printk("sddr09: Bad parity in LBA for block %04X"
" (%02X %02X)\n", i, ptr[6], ptr[7]);
info->pba_to_lba[i] = UNUSABLE;
continue;
}
if (lba>=numblocks) {
US_DEBUGP("Bad LBA %04X for block %04X\n", lba, i);
lba = short_pack(ptr[7], ptr[6]);
lba = (lba & 0x07FF) >> 1;
/*
* Every 1024 physical blocks ("zone"), the LBA numbers
* go back to zero, but are within a higher block of LBA's.
* Also, there is a maximum of 1000 LBA's per zone.
* In other words, in PBA 1024-2047 you will find LBA 0-999
* which are really LBA 1000-1999. This allows for 24 bad
* or special physical blocks per zone.
*/
if (lba >= 1000) {
unsigned long address;
printk("sddr09: Bad LBA %04X for block %04X\n",
lba, i);
info->pba_to_lba[i] = UNDEF /* UNUSABLE */;
if (erase_bad_lba_entries) {
/* some cameras cannot erase a card if it has
bad entries, so we supply this function */
address = (i << (info->pageshift + info->blockshift));
sddr09_erase(us, address>>1);
}
continue;
}
if (lba<0x10 || (lba>=0x3E0 && lba<0x3EF))
lba += 1000*(i/0x400);
if (lba<0x10 || (lba >= 0x3E0 && lba < 0x3EF))
US_DEBUGP("LBA %04X <-> PBA %04X\n", lba, i);
info->pba_to_lba[i] = lba;
info->lba_to_pba[lba] = i;
}
#endif
/*
* Approximate capacity. This is not entirely correct yet,
* since a zone with less than 1000 usable pages leads to
* missing LBAs. Especially if it is the last zone, some
* LBAs can be past capacity.
*/
lbact = 0;
for (i = 0; i < numblocks; i += 1024) {
int ct = 0;
for (j = 0; j < 1024 && i+j < numblocks; j++) {
if (info->pba_to_lba[i+j] != UNUSABLE) {
if (ct >= 1000)
info->pba_to_lba[i+j] = SPARE;
else
ct++;
}
}
lbact += ct;
}
info->lbact = lbact;
US_DEBUGP("Found %d LBA's\n", lbact);
for (i=0; i<alloc_blocks; i++)
kfree(page_address(sg[i].page)+sg[i].offset);
......@@ -756,67 +1513,74 @@ int sddr09_read_map(struct us_data *us) {
return 0;
}
/*
static int init_sddr09(struct us_data *us) {
int result;
unsigned char data[14];
unsigned char command[8] = {
0xc1, 0x01, 0, 0, 0, 0, 0, 0
};
unsigned char command2[8] = {
0x41, 0, 0, 0, 0, 0, 0, 0
};
unsigned char tur[12] = {
0x03, 0x20, 0, 0, 0x0e, 0, 0, 0, 0, 0, 0, 0
};
static void
sddr09_card_info_destructor(void *extra) {
struct sddr09_card_info *info = (struct sddr09_card_info *)extra;
// What the hey is all this for? Doesn't seem to
// affect the device, so we won't do device inits.
if (!info)
return;
if ( (result = sddr09_send_control(us, command, data, 2)) !=
USB_STOR_TRANSPORT_GOOD)
return result;
kfree(info->lba_to_pba);
kfree(info->pba_to_lba);
}
US_DEBUGP("SDDR09: %02X %02X\n", data[0], data[1]);
static void
sddr09_init_card_info(struct us_data *us) {
if (!us->extra) {
us->extra = kmalloc(sizeof(struct sddr09_card_info), GFP_NOIO);
if (us->extra) {
memset(us->extra, 0, sizeof(struct sddr09_card_info));
us->extra_destructor = sddr09_card_info_destructor;
}
}
}
command[1] = 0x08;
/*
* This is needed at a very early stage. If this is not listed in the
* unusual devices list but called from here then LUN 0 of the combo reader
* is not recognized. But I do not know what precisely these calls do.
*/
int
sddr09_init(struct us_data *us) {
int result;
unsigned char data[18];
if ( (result = sddr09_send_control(us, command, data, 2)) !=
USB_STOR_TRANSPORT_GOOD)
result = sddr09_send_command(us, 0x01, USB_DIR_IN, data, 2);
if (result != USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("sddr09_init: send_command fails\n");
return result;
}
US_DEBUGP("SDDR09: %02X %02X\n", data[0], data[1]);
US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]);
// get 07 02
if ( (result = sddr09_send_control(us, command2, tur, 12)) !=
USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("SDDR09: request sense failed\n");
result = sddr09_send_command(us, 0x08, USB_DIR_IN, data, 2);
if (result != USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("sddr09_init: 2nd send_command fails\n");
return result;
}
if ( (result = sddr09_raw_bulk(
us, SCSI_DATA_READ, data, 14)) !=
USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("SDDR09: request sense bulk in failed\n");
return result;
US_DEBUGP("SDDR09init: %02X %02X\n", data[0], data[1]);
// get 07 00
result = sddr09_request_sense(us, data, sizeof(data));
if (result == USB_STOR_TRANSPORT_GOOD && data[2] != 0) {
int j;
for (j=0; j<sizeof(data); j++)
printk(" %02X", data[j]);
printk("\n");
// get 70 00 00 00 00 00 00 * 00 00 00 00 00 00
// 70: current command
// sense key 0, sense code 0, extd sense code 0
// additional transfer length * = sizeof(data) - 7
// Or: 70 00 06 00 00 00 00 0b 00 00 00 00 28 00 00 00 00 00
// sense key 06, sense code 28: unit attention,
// not ready to ready transition
}
US_DEBUGP("SDDR09: request sense worked\n");
// test unit ready
return result;
}
*/
void sddr09_card_info_destructor(void *extra) {
struct sddr09_card_info *info = (struct sddr09_card_info *)extra;
if (!extra)
return;
if (info->lba_to_pba)
kfree(info->lba_to_pba);
if (info->pba_to_lba)
kfree(info->pba_to_lba);
return USB_STOR_TRANSPORT_GOOD; /* not result */
}
/*
......@@ -824,36 +1588,53 @@ void sddr09_card_info_destructor(void *extra) {
*/
int sddr09_transport(Scsi_Cmnd *srb, struct us_data *us)
{
int result;
int i;
static unsigned char sensekey = 0, sensecode = 0;
static unsigned char havefakesense = 0;
int result, i;
unsigned char *ptr;
unsigned long capacity;
unsigned int page, pages;
char string[64];
struct sddr09_card_info *info;
unsigned char inquiry_response[36] = {
0x00, 0x80, 0x00, 0x02, 0x1F, 0x00, 0x00, 0x00
};
unsigned char mode_page_01[16] = { // write-protected for now
0x03, 0x00, 0x80, 0x00,
unsigned char mode_page_01[16] = {
0x0F, 0x00, 0, 0x00,
0x01, 0x0A,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
unsigned char *ptr;
unsigned long capacity;
unsigned int lba;
unsigned int pba;
unsigned int page;
unsigned short pages;
struct sddr09_card_info *info = (struct sddr09_card_info *)(us->extra);
if (!us->extra) {
us->extra = kmalloc(
sizeof(struct sddr09_card_info), GFP_NOIO);
if (!us->extra)
info = (struct sddr09_card_info *)us->extra;
if (!info) {
nand_init_ecc();
sddr09_init_card_info(us);
info = (struct sddr09_card_info *)us->extra;
if (!info)
return USB_STOR_TRANSPORT_ERROR;
memset(us->extra, 0, sizeof(struct sddr09_card_info));
us->extra_destructor = sddr09_card_info_destructor;
}
ptr = (unsigned char *)srb->request_buffer;
if (srb->cmnd[0] == REQUEST_SENSE && havefakesense) {
/* for a faked command, we have to follow with a faked sense */
memset(ptr, 0, srb->request_bufflen);
if (srb->request_bufflen > 7) {
ptr[0] = 0x70;
ptr[2] = sensekey;
ptr[7] = srb->request_bufflen - 7;
}
if (srb->request_bufflen > 12)
ptr[12] = sensecode;
sensekey = sensecode = havefakesense = 0;
return USB_STOR_TRANSPORT_GOOD;
}
havefakesense = 1;
/* Dummy up a response for INQUIRY since SDDR09 doesn't
respond to INQUIRY commands */
......@@ -864,70 +1645,73 @@ int sddr09_transport(Scsi_Cmnd *srb, struct us_data *us)
}
if (srb->cmnd[0] == READ_CAPACITY) {
struct nand_flash_dev *cardinfo;
capacity = sddr09_get_capacity(us, &info->pagesize,
&info->blocksize);
sddr09_get_wp(us, info); /* read WP bit */
if (!capacity)
cardinfo = sddr09_get_cardinfo(us, info->flags);
if (!cardinfo) {
/* probably no media */
sensekey = 0x02; /* not ready */
sensecode = 0x3a; /* medium not present */
return USB_STOR_TRANSPORT_FAILED;
}
info->capacity = (1 << cardinfo->chipshift);
info->pageshift = cardinfo->pageshift;
info->pagesize = (1 << info->pageshift);
info->blockshift = cardinfo->blockshift;
info->blocksize = (1 << info->blockshift);
info->blockmask = info->blocksize - 1;
info->capacity = capacity;
for (info->pageshift=1;
(info->pagesize>>info->pageshift);
info->pageshift++);
info->pageshift--;
for (info->blockshift=1;
(info->blocksize>>info->blockshift);
info->blockshift++);
info->blockshift--;
info->blockmask = (1<<info->blockshift)-1;
// map initialization, must follow get_cardinfo()
sddr09_read_map(us);
// Last page in the card
// Report capacity
capacity /= info->pagesize;
capacity--;
capacity = (info->lbact << info->blockshift) - 1;
ptr[0] = MSB_of(capacity>>16);
ptr[1] = LSB_of(capacity>>16);
ptr[2] = MSB_of(capacity&0xFFFF);
ptr[3] = LSB_of(capacity&0xFFFF);
// The page size
// Report page size
ptr[4] = MSB_of(info->pagesize>>16);
ptr[5] = LSB_of(info->pagesize>>16);
ptr[6] = MSB_of(info->pagesize&0xFFFF);
ptr[7] = LSB_of(info->pagesize&0xFFFF);
sddr09_read_map(us);
return USB_STOR_TRANSPORT_GOOD;
}
if (srb->cmnd[0] == MODE_SENSE) {
// Read-write error recovery page: there needs to
// be a check for write-protect here
// Read-write error recovery page: there needs to
// be a check for write-protect here
if ( (srb->cmnd[2] & 0x3F) == 0x01 ) {
US_DEBUGP(
"SDDR09: Dummy up request for mode page 1\n");
"SDDR09: Dummy up request for mode page 1\n");
if (ptr==NULL ||
srb->request_bufflen<sizeof(mode_page_01))
if (ptr == NULL ||
srb->request_bufflen<sizeof(mode_page_01))
return USB_STOR_TRANSPORT_ERROR;
mode_page_01[0] = sizeof(mode_page_01) - 1;
mode_page_01[2] = (info->flags & SDDR09_WP) ? 0x80 : 0;
memcpy(ptr, mode_page_01, sizeof(mode_page_01));
return USB_STOR_TRANSPORT_GOOD;
} else if ( (srb->cmnd[2] & 0x3F) == 0x3F ) {
US_DEBUGP(
"SDDR09: Dummy up request for all mode pages\n");
US_DEBUGP("SDDR09: Dummy up request for "
"all mode pages\n");
if (ptr==NULL ||
srb->request_bufflen<sizeof(mode_page_01))
if (ptr == NULL ||
srb->request_bufflen<sizeof(mode_page_01))
return USB_STOR_TRANSPORT_ERROR;
memcpy(ptr, mode_page_01, sizeof(mode_page_01));
......@@ -935,22 +1719,22 @@ int sddr09_transport(Scsi_Cmnd *srb, struct us_data *us)
}
// FIXME: sense buffer?
return USB_STOR_TRANSPORT_ERROR;
}
if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
US_DEBUGP(
"SDDR09: %s medium removal. Not that I can do"
" anything about it...\n",
(srb->cmnd[4]&0x03) ? "Prevent" : "Allow");
"SDDR09: %s medium removal. Not that I can do"
" anything about it...\n",
(srb->cmnd[4]&0x03) ? "Prevent" : "Allow");
return USB_STOR_TRANSPORT_GOOD;
}
havefakesense = 0;
if (srb->cmnd[0] == READ_10) {
page = short_pack(srb->cmnd[3], srb->cmnd[2]);
......@@ -958,80 +1742,51 @@ int sddr09_transport(Scsi_Cmnd *srb, struct us_data *us)
page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
// convert page to block and page-within-block
lba = page >> info->blockshift;
page = page & info->blockmask;
// locate physical block corresponding to logical block
if (lba >=
(info->capacity >>
(info->pageshift + info->blockshift) ) ) {
US_DEBUGP("Error: Requested LBA %04X exceeds maximum "
"block %04lX\n", lba,
(info->capacity >> (info->pageshift + info->blockshift))-1);
// FIXME: sense buffer?
return USB_STOR_TRANSPORT_ERROR;
}
pba = info->lba_to_pba[lba];
// if pba is 0, either it's really 0, in which case
// the pba-to-lba map for pba 0 will be the lba,
// or that lba doesn't exist.
if (pba==0 && info->pba_to_lba[0] != lba) {
US_DEBUGP("READ_10: read page %d pagect %d\n",
page, pages);
// FIXME: sense buffer?
return sddr09_read_data(us, page, pages, ptr, srb->use_sg);
}
US_DEBUGP("Error: Requested LBA %04X has no physical block "
"mapping.\n", lba);
if (srb->cmnd[0] == WRITE_10) {
return USB_STOR_TRANSPORT_ERROR;
}
page = short_pack(srb->cmnd[3], srb->cmnd[2]);
page <<= 16;
page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
US_DEBUGP("READ_10: read block %04X (LBA %04X) page %01X"
" pages %d\n",
pba, lba, page, pages);
US_DEBUGP("WRITE_10: write page %d pagect %d\n",
page, pages);
return sddr09_read_data(us,
( (pba << info->blockshift) + page) << info->pageshift,
pages, ptr, srb->use_sg);
return sddr09_write_data(us, page, pages, ptr, srb->use_sg);
}
// Pass TEST_UNIT_READY and REQUEST_SENSE through
if (srb->cmnd[0] != TEST_UNIT_READY &&
srb->cmnd[0] != REQUEST_SENSE)
return USB_STOR_TRANSPORT_ERROR; // FIXME: sense buffer?
srb->cmnd[0] != REQUEST_SENSE) {
havefakesense = 1;
return USB_STOR_TRANSPORT_ERROR;
}
for (; srb->cmd_len<12; srb->cmd_len++)
srb->cmnd[srb->cmd_len] = 0;
srb->cmnd[1] = 0x20;
srb->cmnd[1] = LUNBITS;
string[0] = 0;
for (i=0; i<12; i++)
sprintf(string+strlen(string), "%02X ", srb->cmnd[i]);
sprintf(string+strlen(string), "%02X ", srb->cmnd[i]);
US_DEBUGP("SDDR09: Send control for command %s\n",
string);
if ( (result = sddr09_send_control(us,
usb_sndctrlpipe(us->pusb_dev,0),
0,
0x41,
0,
0,
srb->cmnd,
12)) != USB_STOR_TRANSPORT_GOOD)
return result;
string);
US_DEBUGP("SDDR09: Control for command OK\n");
result = sddr09_send_scsi_command(us, srb->cmnd, 12);
if (result != USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("sddr09_transport: sddr09_send_scsi_command "
"returns %d\n", result);
return result;
}
if (srb->request_bufflen == 0)
return USB_STOR_TRANSPORT_GOOD;
......@@ -1040,17 +1795,17 @@ int sddr09_transport(Scsi_Cmnd *srb, struct us_data *us)
srb->sc_data_direction == SCSI_DATA_READ) {
US_DEBUGP("SDDR09: %s %d bytes\n",
srb->sc_data_direction==SCSI_DATA_WRITE ?
(srb->sc_data_direction == SCSI_DATA_WRITE) ?
"sending" : "receiving",
srb->request_bufflen);
srb->request_bufflen);
result = sddr09_bulk_transport(us,
srb->sc_data_direction,
srb->request_buffer,
srb->request_bufflen, srb->use_sg);
srb->sc_data_direction,
srb->request_buffer,
srb->request_bufflen,
srb->use_sg);
return result;
}
return USB_STOR_TRANSPORT_GOOD;
......
......@@ -5,6 +5,7 @@
*
* Current development and maintenance by:
* (c) 2000 Robert Baruch (autophile@dol.net)
* (c) 2002 Andries Brouwer (aeb@cwi.nl)
*
* See sddr09.c for more explanation
*
......@@ -39,6 +40,9 @@ struct sddr09_card_info {
int blockmask; /* 2^blockshift - 1 */
int *lba_to_pba; /* logical to physical map */
int *pba_to_lba; /* physical to logical map */
int lbact; /* number of available pages */
int flags;
#define SDDR09_WP 1 /* write protected */
};
#endif
......@@ -130,14 +130,14 @@ UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999,
"ImageMate SDDR09",
US_SC_SCSI, US_PR_EUSB_SDDR09, NULL,
US_FL_SINGLE_LUN | US_FL_START_STOP ),
#endif
/* This entry is from Andries.Brouwer@cwi.nl */
UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208,
"SCM Microsystems",
"eUSB SmartMedia / CompactFlash Adapter",
US_SC_SCSI, US_PR_DPCM_USB, NULL,
US_SC_SCSI, US_PR_DPCM_USB, sddr09_init,
US_FL_START_STOP),
#endif
UNUSUAL_DEV( 0x04e6, 0x0006, 0x0100, 0x0205,
"Shuttle",
......
......@@ -525,6 +525,7 @@ static void * skel_probe(struct usb_device *udev, unsigned int ifnum, const stru
int minor;
int buffer_size;
int i;
int retval;
char name[10];
......@@ -535,14 +536,20 @@ static void * skel_probe(struct usb_device *udev, unsigned int ifnum, const stru
}
down (&minor_table_mutex);
if (usb_register_dev (&skel_driver, 1, &minor)) {
retval = usb_register_dev (&skel_driver, 1, &minor);
if (retval) {
if (retval != -ENODEV) {
/* something prevented us from registering this driver */
err ("Not able to get a minor for this device.");
goto exit;
}
/* we could not get a dynamic minor, so lets find one of our own */
for (minor = 0; minor < MAX_DEVICES; ++minor) {
if (minor_table[minor] == NULL)
break;
}
if (minor >= MAX_DEVICES) {
info ("Too many devices plugged in, can not handle this device.");
err ("Too many devices plugged in, can not handle this device.");
goto exit;
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment