arm64: dts: layerscape: add ftm_alarm0 node

The patch adds ftm_alarm0 DT node
	- add new rcpm node
	- add ftm_alarm0 node
	- aliases ftm_alarm0 as rtc1
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi

@@ -17,6 +17,7 @@ / {
 
 	aliases {
 		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
 		rtic-a = &rtic_a;
 		rtic-b = &rtic_b;
 		rtic-c = &rtic_c;
@@ -512,6 +513,20 @@ pcie: pcie@3400000 {
 					<0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1012a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1012a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 
 	firmware {

arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi

@@ -27,6 +27,7 @@ aliases {
 		ethernet4 = &enet4;
 		ethernet5 = &enet5;
 		ethernet6 = &enet6;
+		rtc1 = &ftm_alarm0;
 	};
 
 	cpus {
@@ -829,6 +830,19 @@ qdma: dma-controller@8380000 {
 			big-endian;
 		};
 
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1043a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1043a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 
 	firmware {

arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi

@@ -28,6 +28,7 @@ aliases {
 		ethernet5 = &enet5;
 		ethernet6 = &enet6;
 		ethernet7 = &enet7;
+		rtc1 = &ftm_alarm0;
 	};
 
 	cpus {
@@ -765,6 +766,20 @@ qdma: dma-controller@8380000 {
 			queue-sizes = <64 64>;
 			big-endian;
 		};
+
+		rcpm: power-controller@1ee2140 {
+			compatible = "fsl,ls1046a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1ee2140 0x0 0x4>;
+			#fsl,rcpm-wakeup-cells = <1>;
+		};
+
+		ftm_alarm0: timer@29d0000 {
+			compatible = "fsl,ls1046a-ftm-alarm";
+			reg = <0x0 0x29d0000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x20000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			big-endian;
+		};
 	};
 
 	reserved-memory {

arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi

@@ -18,6 +18,7 @@ / {
 
 	aliases {
 		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
 	};
 
 	cpus {
@@ -781,6 +782,19 @@ dpmac10: dpmac@a {
 				};
 			};
 		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x18>;
+			#fsl,rcpm-wakeup-cells = <6>;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls1088a-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	firmware {

arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi

@@ -20,6 +20,7 @@ / {
 
 	aliases {
 		crypto = &crypto;
+		rtc1 = &ftm_alarm0;
 		serial0 = &serial0;
 		serial1 = &serial1;
 		serial2 = &serial2;
@@ -763,6 +764,19 @@ ccn@4000000 {
 			reg = <0x0 0x04000000 0x0 0x01000000>;
 			interrupts = <0 12 4>;
 		};
+
+		rcpm: power-controller@1e34040 {
+			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
+			reg = <0x0 0x1e34040 0x0 0x18>;
+			#fsl,rcpm-wakeup-cells = <6>;
+		};
+
+		ftm_alarm0: timer@2800000 {
+			compatible = "fsl,ls208xa-ftm-alarm";
+			reg = <0x0 0x2800000 0x0 0x10000>;
+			fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 
 	ddr1: memory-controller@1080000 {