Commit f516d322 authored by Jerome Brunet's avatar Jerome Brunet Committed by Mark Brown

ASoC: tas517x: add tas5707 support

Add support for the tas5707 audio power amplifier.
Signed-off-by: default avatarJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 599eb906
......@@ -959,8 +959,11 @@ config SND_SOC_TAS5086
depends on I2C
config SND_SOC_TAS571X
tristate "Texas Instruments TAS5711/TAS5717/TAS5719/TAS5721 power amplifiers"
tristate "Texas Instruments TAS571x power amplifiers"
depends on I2C
help
Enable support for Texas Instruments TAS5707, TAS5711, TAS5717,
TAS5719 and TAS5721 power amplifiers
config SND_SOC_TAS5720
tristate "Texas Instruments TAS5720 Mono Audio amplifier"
......
......@@ -7,6 +7,9 @@
* TAS5721 support:
* Copyright (C) 2016 Petr Kulhavy, Barix AG <petr@barix.com>
*
* TAS5707 support:
* Copyright (C) 2018 Jerome Brunet, Baylibre SAS <jbrunet@baylibre.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
......@@ -444,6 +447,111 @@ static const struct tas571x_chip tas5711_chip = {
.vol_reg_size = 1,
};
static const struct regmap_range tas5707_volatile_regs_range[] = {
regmap_reg_range(TAS571X_CLK_CTRL_REG, TAS571X_ERR_STATUS_REG),
regmap_reg_range(TAS571X_OSC_TRIM_REG, TAS571X_OSC_TRIM_REG),
regmap_reg_range(TAS5707_CH1_BQ0_REG, TAS5707_CH2_BQ6_REG),
};
static const struct regmap_access_table tas5707_volatile_regs = {
.yes_ranges = tas5707_volatile_regs_range,
.n_yes_ranges = ARRAY_SIZE(tas5707_volatile_regs_range),
};
static const DECLARE_TLV_DB_SCALE(tas5707_volume_tlv, -7900, 50, 1);
static const char * const tas5707_volume_slew_step_txt[] = {
"256", "512", "1024", "2048",
};
static const unsigned int tas5707_volume_slew_step_values[] = {
3, 0, 1, 2,
};
static SOC_VALUE_ENUM_SINGLE_DECL(tas5707_volume_slew_step_enum,
TAS571X_VOL_CFG_REG, 0, 0x3,
tas5707_volume_slew_step_txt,
tas5707_volume_slew_step_values);
static const struct snd_kcontrol_new tas5707_controls[] = {
SOC_SINGLE_TLV("Master Volume",
TAS571X_MVOL_REG,
0, 0xff, 1, tas5707_volume_tlv),
SOC_DOUBLE_R_TLV("Speaker Volume",
TAS571X_CH1_VOL_REG,
TAS571X_CH2_VOL_REG,
0, 0xff, 1, tas5707_volume_tlv),
SOC_DOUBLE("Speaker Switch",
TAS571X_SOFT_MUTE_REG,
TAS571X_SOFT_MUTE_CH1_SHIFT, TAS571X_SOFT_MUTE_CH2_SHIFT,
1, 1),
SOC_ENUM("Slew Rate Steps", tas5707_volume_slew_step_enum),
BIQUAD_COEFS("CH1 - Biquad 0", TAS5707_CH1_BQ0_REG),
BIQUAD_COEFS("CH1 - Biquad 1", TAS5707_CH1_BQ1_REG),
BIQUAD_COEFS("CH1 - Biquad 2", TAS5707_CH1_BQ2_REG),
BIQUAD_COEFS("CH1 - Biquad 3", TAS5707_CH1_BQ3_REG),
BIQUAD_COEFS("CH1 - Biquad 4", TAS5707_CH1_BQ4_REG),
BIQUAD_COEFS("CH1 - Biquad 5", TAS5707_CH1_BQ5_REG),
BIQUAD_COEFS("CH1 - Biquad 6", TAS5707_CH1_BQ6_REG),
BIQUAD_COEFS("CH2 - Biquad 0", TAS5707_CH2_BQ0_REG),
BIQUAD_COEFS("CH2 - Biquad 1", TAS5707_CH2_BQ1_REG),
BIQUAD_COEFS("CH2 - Biquad 2", TAS5707_CH2_BQ2_REG),
BIQUAD_COEFS("CH2 - Biquad 3", TAS5707_CH2_BQ3_REG),
BIQUAD_COEFS("CH2 - Biquad 4", TAS5707_CH2_BQ4_REG),
BIQUAD_COEFS("CH2 - Biquad 5", TAS5707_CH2_BQ5_REG),
BIQUAD_COEFS("CH2 - Biquad 6", TAS5707_CH2_BQ6_REG),
};
static const struct reg_default tas5707_reg_defaults[] = {
{TAS571X_CLK_CTRL_REG, 0x6c},
{TAS571X_DEV_ID_REG, 0x70},
{TAS571X_ERR_STATUS_REG, 0x00},
{TAS571X_SYS_CTRL_1_REG, 0xa0},
{TAS571X_SDI_REG, 0x05},
{TAS571X_SYS_CTRL_2_REG, 0x40},
{TAS571X_SOFT_MUTE_REG, 0x00},
{TAS571X_MVOL_REG, 0xff},
{TAS571X_CH1_VOL_REG, 0x30},
{TAS571X_CH2_VOL_REG, 0x30},
{TAS571X_VOL_CFG_REG, 0x91},
{TAS571X_MODULATION_LIMIT_REG, 0x02},
{TAS571X_IC_DELAY_CH1_REG, 0xac},
{TAS571X_IC_DELAY_CH2_REG, 0x54},
{TAS571X_IC_DELAY_CH3_REG, 0xac},
{TAS571X_IC_DELAY_CH4_REG, 0x54},
{TAS571X_START_STOP_PERIOD_REG, 0x0f},
{TAS571X_OSC_TRIM_REG, 0x82},
{TAS571X_BKND_ERR_REG, 0x02},
{TAS571X_INPUT_MUX_REG, 0x17772},
{TAS571X_PWM_MUX_REG, 0x1021345},
};
static const struct regmap_config tas5707_regmap_config = {
.reg_bits = 8,
.val_bits = 32,
.max_register = 0xff,
.reg_read = tas571x_reg_read,
.reg_write = tas571x_reg_write,
.reg_defaults = tas5707_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(tas5707_reg_defaults),
.cache_type = REGCACHE_RBTREE,
.wr_table = &tas571x_write_regs,
.volatile_table = &tas5707_volatile_regs,
};
static const struct tas571x_chip tas5707_chip = {
.supply_names = tas5711_supply_names,
.num_supply_names = ARRAY_SIZE(tas5711_supply_names),
.controls = tas5707_controls,
.num_controls = ARRAY_SIZE(tas5707_controls),
.regmap_config = &tas5707_regmap_config,
.vol_reg_size = 1,
};
static const char *const tas5717_supply_names[] = {
"AVDD",
"DVDD",
......@@ -775,6 +883,7 @@ static int tas571x_i2c_remove(struct i2c_client *client)
}
static const struct of_device_id tas571x_of_match[] = {
{ .compatible = "ti,tas5707", .data = &tas5707_chip, },
{ .compatible = "ti,tas5711", .data = &tas5711_chip, },
{ .compatible = "ti,tas5717", .data = &tas5717_chip, },
{ .compatible = "ti,tas5719", .data = &tas5717_chip, },
......@@ -784,6 +893,7 @@ static const struct of_device_id tas571x_of_match[] = {
MODULE_DEVICE_TABLE(of, tas571x_of_match);
static const struct i2c_device_id tas571x_i2c_id[] = {
{ "tas5707", (kernel_ulong_t) &tas5707_chip },
{ "tas5711", (kernel_ulong_t) &tas5711_chip },
{ "tas5717", (kernel_ulong_t) &tas5717_chip },
{ "tas5719", (kernel_ulong_t) &tas5717_chip },
......
......@@ -53,6 +53,22 @@
#define TAS571X_PWM_MUX_REG 0x25
/* 20-byte biquad registers */
#define TAS5707_CH1_BQ0_REG 0x29
#define TAS5707_CH1_BQ1_REG 0x2a
#define TAS5707_CH1_BQ2_REG 0x2b
#define TAS5707_CH1_BQ3_REG 0x2c
#define TAS5707_CH1_BQ4_REG 0x2d
#define TAS5707_CH1_BQ5_REG 0x2e
#define TAS5707_CH1_BQ6_REG 0x2f
#define TAS5707_CH2_BQ0_REG 0x30
#define TAS5707_CH2_BQ1_REG 0x31
#define TAS5707_CH2_BQ2_REG 0x32
#define TAS5707_CH2_BQ3_REG 0x33
#define TAS5707_CH2_BQ4_REG 0x34
#define TAS5707_CH2_BQ5_REG 0x35
#define TAS5707_CH2_BQ6_REG 0x36
#define TAS5717_CH1_BQ0_REG 0x26
#define TAS5717_CH1_BQ1_REG 0x27
#define TAS5717_CH1_BQ2_REG 0x28
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment