x86/apic: Always provide irq_compose_msi_msg() method for vector domain

This shouldn't be dependent on PCI_MSI. HPET and I/O-APIC can deliver
interrupts through MSI without having any PCI in the system at all.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-10-dwmw2@infradead.org

arch/x86/include/asm/apic.h

@@ -520,12 +520,10 @@ static inline void apic_smt_update(void) { }
 #endif
 
 struct msi_msg;
+struct irq_cfg;
 
-#ifdef CONFIG_PCI_MSI
-void x86_vector_msi_compose_msg(struct irq_data *data, struct msi_msg *msg);
-#else
-# define x86_vector_msi_compose_msg NULL
-#endif
+extern void __irq_msi_compose_msg(struct irq_cfg *cfg, struct msi_msg *msg,
+				  bool dmar);
 
 extern void ioapic_zap_locks(void);
 

arch/x86/kernel/apic/apic.c

@@ -50,6 +50,7 @@
 #include <asm/io_apic.h>
 #include <asm/desc.h>
 #include <asm/hpet.h>
+#include <asm/msidef.h>
 #include <asm/mtrr.h>
 #include <asm/time.h>
 #include <asm/smp.h>
@@ -2480,6 +2481,37 @@ int hard_smp_processor_id(void)
 	return read_apic_id();
 }
 
+void __irq_msi_compose_msg(struct irq_cfg *cfg, struct msi_msg *msg,
+			   bool dmar)
+{
+	msg->address_hi = MSI_ADDR_BASE_HI;
+
+	msg->address_lo =
+		MSI_ADDR_BASE_LO |
+		(apic->dest_mode_logical ?
+			MSI_ADDR_DEST_MODE_LOGICAL :
+			MSI_ADDR_DEST_MODE_PHYSICAL) |
+		MSI_ADDR_REDIRECTION_CPU |
+		MSI_ADDR_DEST_ID(cfg->dest_apicid);
+
+	msg->data =
+		MSI_DATA_TRIGGER_EDGE |
+		MSI_DATA_LEVEL_ASSERT |
+		MSI_DATA_DELIVERY_FIXED |
+		MSI_DATA_VECTOR(cfg->vector);
+
+	/*
+	 * Only the IOMMU itself can use the trick of putting destination
+	 * APIC ID into the high bits of the address. Anything else would
+	 * just be writing to memory if it tried that, and needs IR to
+	 * address higher APIC IDs.
+	 */
+	if (dmar)
+		msg->address_hi |= MSI_ADDR_EXT_DEST_ID(cfg->dest_apicid);
+	else
+		WARN_ON_ONCE(MSI_ADDR_EXT_DEST_ID(cfg->dest_apicid));
+}
+
 /*
  * Override the generic EOI implementation with an optimized version.
  * Only called during early boot when only one CPU is active and with

arch/x86/kernel/apic/msi.c

@@ -15,7 +15,6 @@
 #include <linux/hpet.h>
 #include <linux/msi.h>
 #include <asm/irqdomain.h>
-#include <asm/msidef.h>
 #include <asm/hpet.h>
 #include <asm/hw_irq.h>
 #include <asm/apic.h>
@@ -23,42 +22,6 @@
 
 struct irq_domain *x86_pci_msi_default_domain __ro_after_init;
 
-static void __irq_msi_compose_msg(struct irq_cfg *cfg, struct msi_msg *msg,
-				  bool dmar)
-{
-	msg->address_hi = MSI_ADDR_BASE_HI;
-
-	msg->address_lo =
-		MSI_ADDR_BASE_LO |
-		(apic->dest_mode_logical ?
-			MSI_ADDR_DEST_MODE_LOGICAL :
-			MSI_ADDR_DEST_MODE_PHYSICAL) |
-		MSI_ADDR_REDIRECTION_CPU |
-		MSI_ADDR_DEST_ID(cfg->dest_apicid);
-
-	msg->data =
-		MSI_DATA_TRIGGER_EDGE |
-		MSI_DATA_LEVEL_ASSERT |
-		MSI_DATA_DELIVERY_FIXED |
-		MSI_DATA_VECTOR(cfg->vector);
-
-	/*
-	 * Only the IOMMU itself can use the trick of putting destination
-	 * APIC ID into the high bits of the address. Anything else would
-	 * just be writing to memory if it tried that, and needs IR to
-	 * address higher APIC IDs.
-	 */
-	if (dmar)
-		msg->address_hi |= MSI_ADDR_EXT_DEST_ID(cfg->dest_apicid);
-	else
-		WARN_ON_ONCE(MSI_ADDR_EXT_DEST_ID(cfg->dest_apicid));
-}
-
-void x86_vector_msi_compose_msg(struct irq_data *data, struct msi_msg *msg)
-{
-	__irq_msi_compose_msg(irqd_cfg(data), msg, false);
-}
-
 static void irq_msi_update_msg(struct irq_data *irqd, struct irq_cfg *cfg)
 {
 	struct msi_msg msg[2] = { [1] = { }, };

arch/x86/kernel/apic/vector.c

@@ -818,6 +818,12 @@ void apic_ack_edge(struct irq_data *irqd)
 	apic_ack_irq(irqd);
 }
 
+static void x86_vector_msi_compose_msg(struct irq_data *data,
+				       struct msi_msg *msg)
+{
+       __irq_msi_compose_msg(irqd_cfg(data), msg, false);
+}
+
 static struct irq_chip lapic_controller = {
 	.name			= "APIC",
 	.irq_ack		= apic_ack_edge,