Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "First round of updates for the input subsystem.

  You will get a new touchsreen driver for Cypress 4th generation
  devices, a driver for a special controller implementing PS/2 protocol
  in OLPC devices, and a driver for power key for SiRFprimaII PWRC.

  HID and bcm5497 now support for the 2013 MacBook Air.

  EVIOCGKEY and the rest of evdev ioctls now flush events of matching
  type from the client's event queue so that clients can be sure any
  events received after issuing EVIOCG* ioctl are new events.

  And a host of cleanups and improvements in other drivers"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (87 commits)
  Input: cyttsp4 - kfree xfer_buf on error path in probe()
  Input: tps6507x-ts - select INPUT_POLLDEV
  Input: bcm5974 - add support for the 2013 MacBook Air
  HID: apple: Add support for the 2013 Macbook Air
  Input: cyttsp4 - leak on error path in probe()
  Input: cyttsp4 - silence NULL dereference warning
  Input: cyttsp4 - silence shift wrap warning
  Input: tps6507x-ts - convert to polled input device infrastructure
  ARM: davinci: da850-evm: remove vref from touchscreen platform data
  Input: cyttsp4 - SPI driver for Cypress TMA4XX touchscreen devices
  Input: cyttsp4 - I2C driver for Cypress TMA4XX touchscreen devices
  Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices
  Input: cyttsp - I2C driver split into two modules
  Input: add OLPC AP-SP driver
  Input: nspire-keypad - remove redundant dev_err call in nspire_keypad_probe()
  Input: tps6507x-ts - remove vref from platform data
  Input: tps6507x-ts - use bool for booleans
  Input: tps6507x-ts - remove bogus unreachable code
  Input: samsung-keypad - let device core setup the default pin configuration
  Input: wacom_i2c - implement hovering capability
  ...

Documentation/devicetree/bindings/input/pxa27x-keypad.txt

+* Marvell PXA Keypad controller
+
+Required Properties
+- compatible : should be "marvell,pxa27x-keypad"
+- reg : Address and length of the register set for the device
+- interrupts : The interrupt for the keypad controller
+- marvell,debounce-interval : How long time the key will be
+  recognized when it is pressed. It is a u32 value, and bit[31:16]
+  is debounce interval for direct key and bit[15:0] is debounce
+  interval for matrix key. The value is in binary number of 2ms
+
+Optional Properties For Matrix Keyes
+Please refer to matrix-keymap.txt
+
+Optional Properties for Direct Keyes
+- marvell,direct-key-count : How many direct keyes are used.
+- marvell,direct-key-mask : The mask indicates which keyes
+  are used. If bit[X] of the mask is set, the direct key X
+  is used.
+- marvell,direct-key-low-active : Direct key status register
+  tells the level of pins that connects to the direct keyes.
+  When this property is set, it means that when the pin level
+  is low, the key is pressed(active).
+- marvell,direct-key-map : It is a u16 array. Each item indicates
+  the linux key-code for the direct key.
+
+Optional Properties For Rotary
+- marvell,rotary0 : It is a u32 value. Bit[31:16] is the
+  linux key-code for rotary up. Bit[15:0] is the linux key-code
+  for rotary down. It is for rotary 0.
+- marvell,rotary1 : Same as marvell,rotary0. It is for rotary 1.
+- marvell,rotary-rel-key : When rotary is used for relative axes
+  in the device, the value indicates the key-code for relative
+  axes measurement in the device. It is a u32 value. Bit[31:16]
+  is for rotary 1, and Bit[15:0] is for rotary 0.
+
+Examples:
+	keypad: keypad@d4012000 {
+		keypad,num-rows = <3>;
+		keypad,num-columns = <5>;
+		linux,keymap = <0x0000000e	/* KEY_BACKSPACE */
+				0x0001006b	/* KEY_END */
+				0x00020061	/* KEY_RIGHTCTRL */
+				0x0003000b	/* KEY_0 */
+				0x00040002	/* KEY_1 */
+				0x0100008b	/* KEY_MENU */
+				0x01010066	/* KEY_HOME */
+				0x010200e7	/* KEY_SEND */
+				0x01030009	/* KEY_8 */
+				0x0104000a	/* KEY_9 */
+				0x02000160	/* KEY_OK */
+				0x02010003	/* KEY_2 */
+				0x02020004	/* KEY_3 */
+				0x02030005	/* KEY_4 */
+				0x02040006>;	/* KEY_5 */
+		marvell,rotary0 = <0x006c0067>;	/* KEY_UP & KEY_DOWN */
+		marvell,direct-key-count = <1>;
+		marvell,direct-key-map = <0x001c>;
+		marvell,debounce-interval = <0x001e001e>;
+	};

Documentation/devicetree/bindings/input/samsung-keypad.txt

@@ -25,14 +25,6 @@ Required Board Specific Properties:
 - samsung,keypad-num-columns: Number of column lines connected to the
   keypad controller.
 
-- row-gpios: List of gpios used as row lines. The gpio specifier for
-  this property depends on the gpio controller to which these row lines
-  are connected.
-
-- col-gpios: List of gpios used as column lines. The gpio specifier for
-  this property depends on the gpio controller to which these column
-  lines are connected.
-
 - Keys represented as child nodes: Each key connected to the keypad
   controller is represented as a child node to the keypad controller
   device node and should include the following properties.
@@ -41,6 +33,9 @@ Required Board Specific Properties:
   - linux,code: the key-code to be reported when the key is pressed
     and released.
 
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
 Optional Properties specific to linux:
 - linux,keypad-no-autorepeat: do no enable autorepeat feature.
 - linux,keypad-wakeup: use any event on keypad as wakeup event.
@@ -56,17 +51,8 @@ Example:
 		linux,input-no-autorepeat;
 		linux,input-wakeup;
 
-		row-gpios = <&gpx2 0 3 3 0
-			     &gpx2 1 3 3 0>;
-
-		col-gpios = <&gpx1 0 3 0 0
-			     &gpx1 1 3 0 0
-			     &gpx1 2 3 0 0
-			     &gpx1 3 3 0 0
-			     &gpx1 4 3 0 0
-			     &gpx1 5 3 0 0
-			     &gpx1 6 3 0 0
-			     &gpx1 7 3 0 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&keypad_rows &keypad_columns>;
 
 		key_1 {
 			keypad,row = <0>;

Documentation/devicetree/bindings/input/ti,nspire-keypad.txt

+TI-NSPIRE Keypad
+
+Required properties:
+- compatible: Compatible property value should be "ti,nspire-keypad".
+
+- reg: Physical base address of the peripheral and length of memory mapped
+  region.
+
+- interrupts: The interrupt number for the peripheral.
+
+- scan-interval: How often to scan in us. Based on a APB speed of 33MHz, the
+	maximum and minimum delay time is ~2000us and ~500us respectively
+
+- row-delay: How long to wait before scanning each row.
+
+- clocks: The clock this peripheral is attached to.
+
+- linux,keymap: The keymap to use
+	(see Documentation/devicetree/bindings/input/matrix-keymap.txt)
+
+Optional properties:
+- active-low: Specify that the keypad is active low (i.e. logical low signifies
+	a key press).
+
+Example:
+
+input {
+	compatible = "ti,nspire-keypad";
+	reg = <0x900E0000 0x1000>;
+	interrupts = <16>;
+
+	scan-interval = <1000>;
+	row-delay = <200>;
+
+	clocks = <&apb_pclk>;
+
+	linux,keymap = <
+	0x0000001c	0x0001001c	0x00040039
+	0x0005002c	0x00060015	0x0007000b
+	0x0008000f	0x0100002d	0x01010011
+	0x0102002f	0x01030004	0x01040016
+	0x01050014	0x0106001f	0x01070002
+	0x010a006a	0x02000013	0x02010010
+	0x02020019	0x02030007	0x02040018
+	0x02050031	0x02060032	0x02070005
+	0x02080028	0x0209006c	0x03000026
+	0x03010025	0x03020024	0x0303000a
+	0x03040017	0x03050023	0x03060022
+	0x03070008	0x03080035	0x03090069
+	0x04000021	0x04010012	0x04020020
+	0x0404002e	0x04050030	0x0406001e
+	0x0407000d	0x04080037	0x04090067
+	0x05010038	0x0502000c	0x0503001b
+	0x05040034	0x0505001a	0x05060006
+	0x05080027	0x0509000e	0x050a006f
+	0x0600002b	0x0602004e	0x06030068
+	0x06040003	0x0605006d	0x06060009
+	0x06070001	0x0609000f	0x0708002a
+	0x0709001d	0x070a0033	>;
+};

Documentation/devicetree/bindings/serio/olpc,ap-sp.txt

+OLPC AP-SP serio interface
+
+Required properties:
+- compatible : "olpc,ap-sp"
+- reg : base address and length of SoC's WTM registers
+- interrupts : SP-AP interrupt
+
+Example:
+	ap-sp@d4290000 {
+		compatible = "olpc,ap-sp";
+		reg = <0xd4290000 0x1000>;
+		interrupts = <40>;
+	}

Documentation/input/multi-touch-protocol.txt

@@ -80,6 +80,8 @@ Userspace can detect that a driver can report more total contacts than slots
 by noting that the largest supported BTN_TOOL_*TAP event is larger than the
 total number of type B slots reported in the absinfo for the ABS_MT_SLOT axis.
 
+The minimum value of the ABS_MT_SLOT axis must be 0.
+
 Protocol Example A
 ------------------
 

arch/arm/mach-davinci/board-da850-evm.c

@@ -985,7 +985,6 @@ static struct regulator_init_data tps65070_regulator_data[] = {
 static struct touchscreen_init_data tps6507x_touchscreen_data = {
 	.poll_period =  30,	/* ms between touch samples */
 	.min_pressure = 0x30,	/* minimum pressure to trigger touch */
-	.vref = 0,		/* turn off vref when not using A/D */
 	.vendor = 0,		/* /sys/class/input/input?/id/vendor */
 	.product = 65070,	/* /sys/class/input/input?/id/product */
 	.version = 0x100,	/* /sys/class/input/input?/id/version */

arch/arm/mach-mmp/aspenite.c

@@ -210,7 +210,7 @@ struct pxa168fb_mach_info aspenite_lcd_info = {
 	.invert_pixclock	= 0,
 };
 
-static unsigned int aspenite_matrix_key_map[] = {
+static const unsigned int aspenite_matrix_key_map[] = {
 	KEY(0, 6, KEY_UP),	/* SW 4 */
 	KEY(0, 7, KEY_DOWN),	/* SW 5 */
 	KEY(1, 6, KEY_LEFT),	/* SW 6 */
@@ -219,11 +219,15 @@ static unsigned int aspenite_matrix_key_map[] = {
 	KEY(4, 7, KEY_ESC),	/* SW 9 */
 };
 
+static struct matrix_keymap_data aspenite_matrix_keymap_data = {
+	.keymap			= aspenite_matrix_key_map,
+	.keymap_size		= ARRAY_SIZE(aspenite_matrix_key_map),
+};
+
 static struct pxa27x_keypad_platform_data aspenite_keypad_info __initdata = {
 	.matrix_key_rows	= 5,
 	.matrix_key_cols	= 8,
-	.matrix_key_map		= aspenite_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(aspenite_matrix_key_map),
+	.matrix_keymap_data	= &aspenite_matrix_keymap_data,
 	.debounce_interval	= 30,
 };
 

arch/arm/mach-mmp/teton_bga.c

@@ -61,11 +61,15 @@ static unsigned int teton_bga_matrix_key_map[] = {
 	KEY(1, 7, KEY_RIGHT),
 };
 
+static struct matrix_keymap_data teton_bga_matrix_keymap_data = {
+	.keymap			= teton_bga_matrix_key_map,
+	.keymap_size		= ARRAY_SIZE(teton_bga_matrix_key_map),
+};
+
 static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
 	.matrix_key_rows        = 2,
 	.matrix_key_cols        = 8,
-	.matrix_key_map         = teton_bga_matrix_key_map,
-	.matrix_key_map_size    = ARRAY_SIZE(teton_bga_matrix_key_map),
+	.matrix_keymap_data	= &teton_bga_matrix_keymap_data,
 	.debounce_interval      = 30,
 };
 

arch/arm/mach-pxa/em-x270.c

@@ -833,21 +833,25 @@ static inline void em_x270_init_ac97(void) {}
 #endif
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int em_x270_module_matrix_keys[] = {
+static const unsigned int em_x270_module_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
 	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
 	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
 };
 
+static struct matrix_keymap_data em_x270_matrix_keymap_data = {
+	.keymap			= em_x270_module_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(em_x270_module_matrix_keys),
+};
+
 struct pxa27x_keypad_platform_data em_x270_module_keypad_info = {
 	/* code map for the matrix keys */
 	.matrix_key_rows	= 3,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= em_x270_module_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_module_matrix_keys),
+	.matrix_keymap_data	= &em_x270_matrix_keymap_data,
 };
 
-static unsigned int em_x270_exeda_matrix_keys[] = {
+static const unsigned int em_x270_exeda_matrix_keys[] = {
 	KEY(0, 0, KEY_RIGHTSHIFT), KEY(0, 1, KEY_RIGHTCTRL),
 	KEY(0, 2, KEY_RIGHTALT), KEY(0, 3, KEY_SPACE),
 	KEY(0, 4, KEY_LEFTALT), KEY(0, 5, KEY_LEFTCTRL),
@@ -889,12 +893,16 @@ static unsigned int em_x270_exeda_matrix_keys[] = {
 	KEY(7, 6, 0), KEY(7, 7, 0),
 };
 
+static struct matrix_keymap_data em_x270_exeda_matrix_keymap_data = {
+	.keymap			= em_x270_exeda_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(em_x270_exeda_matrix_keys),
+};
+
 struct pxa27x_keypad_platform_data em_x270_exeda_keypad_info = {
 	/* code map for the matrix keys */
 	.matrix_key_rows	= 8,
 	.matrix_key_cols	= 8,
-	.matrix_key_map		= em_x270_exeda_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(em_x270_exeda_matrix_keys),
+	.matrix_keymap_data	= &em_x270_exeda_matrix_keymap_data,
 };
 
 static void __init em_x270_init_keypad(void)

arch/arm/mach-pxa/ezx.c

@@ -392,7 +392,7 @@ static unsigned long e6_pin_config[] __initdata = {
 
 /* KEYPAD */
 #ifdef CONFIG_MACH_EZX_A780
-static unsigned int a780_key_map[] = {
+static const unsigned int a780_key_map[] = {
 	KEY(0, 0, KEY_SEND),
 	KEY(0, 1, KEY_BACK),
 	KEY(0, 2, KEY_END),
@@ -424,11 +424,15 @@ static unsigned int a780_key_map[] = {
 	KEY(4, 4, KEY_DOWN),
 };
 
+static struct matrix_keymap_data a780_matrix_keymap_data = {
+	.keymap			= a780_key_map,
+	.keymap_size		= ARRAY_SIZE(a780_key_map),
+};
+
 static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
 	.matrix_key_rows = 5,
 	.matrix_key_cols = 5,
-	.matrix_key_map = a780_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(a780_key_map),
+	.matrix_keymap_data = &a780_matrix_keymap_data,
 
 	.direct_key_map = { KEY_CAMERA },
 	.direct_key_num = 1,
@@ -438,7 +442,7 @@ static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
 #endif /* CONFIG_MACH_EZX_A780 */
 
 #ifdef CONFIG_MACH_EZX_E680
-static unsigned int e680_key_map[] = {
+static const unsigned int e680_key_map[] = {
 	KEY(0, 0, KEY_UP),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_RESERVED),
@@ -455,11 +459,15 @@ static unsigned int e680_key_map[] = {
 	KEY(2, 3, KEY_KPENTER),
 };
 
+static struct matrix_keymap_data e680_matrix_keymap_data = {
+	.keymap			= e680_key_map,
+	.keymap_size		= ARRAY_SIZE(e680_key_map),
+};
+
 static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
 	.matrix_key_rows = 3,
 	.matrix_key_cols = 4,
-	.matrix_key_map = e680_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(e680_key_map),
+	.matrix_keymap_data = &e680_matrix_keymap_data,
 
 	.direct_key_map = {
 		KEY_CAMERA,
@@ -476,7 +484,7 @@ static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
 #endif /* CONFIG_MACH_EZX_E680 */
 
 #ifdef CONFIG_MACH_EZX_A1200
-static unsigned int a1200_key_map[] = {
+static const unsigned int a1200_key_map[] = {
 	KEY(0, 0, KEY_RESERVED),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_PAGEDOWN),
@@ -513,18 +521,22 @@ static unsigned int a1200_key_map[] = {
 	KEY(4, 5, KEY_RESERVED),
 };
 
+static struct matrix_keymap_data a1200_matrix_keymap_data = {
+	.keymap			= a1200_key_map,
+	.keymap_size		= ARRAY_SIZE(a1200_key_map),
+};
+
 static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
 	.matrix_key_rows = 5,
 	.matrix_key_cols = 6,
-	.matrix_key_map = a1200_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(a1200_key_map),
+	.matrix_keymap_data = &a1200_matrix_keymap_data,
 
 	.debounce_interval = 30,
 };
 #endif /* CONFIG_MACH_EZX_A1200 */
 
 #ifdef CONFIG_MACH_EZX_E6
-static unsigned int e6_key_map[] = {
+static const unsigned int e6_key_map[] = {
 	KEY(0, 0, KEY_RESERVED),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_PAGEDOWN),
@@ -561,18 +573,22 @@ static unsigned int e6_key_map[] = {
 	KEY(4, 5, KEY_PREVIOUSSONG),
 };
 
+static struct matrix_keymap_data e6_keymap_data = {
+	.keymap			= e6_key_map,
+	.keymap_size		= ARRAY_SIZE(e6_key_map),
+};
+
 static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
 	.matrix_key_rows = 5,
 	.matrix_key_cols = 6,
-	.matrix_key_map = e6_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(e6_key_map),
+	.matrix_keymap_data = &e6_keymap_data,
 
 	.debounce_interval = 30,
 };
 #endif /* CONFIG_MACH_EZX_E6 */
 
 #ifdef CONFIG_MACH_EZX_A910
-static unsigned int a910_key_map[] = {
+static const unsigned int a910_key_map[] = {
 	KEY(0, 0, KEY_NUMERIC_6),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_PAGEDOWN),
@@ -609,18 +625,22 @@ static unsigned int a910_key_map[] = {
 	KEY(4, 5, KEY_RESERVED),
 };
 
+static struct matrix_keymap_data a910_matrix_keymap_data = {
+	.keymap			= a910_key_map,
+	.keymap_size		= ARRAY_SIZE(a910_key_map),
+};
+
 static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
 	.matrix_key_rows = 5,
 	.matrix_key_cols = 6,
-	.matrix_key_map = a910_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(a910_key_map),
+	.matrix_keymap_data = &a910_matrix_keymap_data,
 
 	.debounce_interval = 30,
 };
 #endif /* CONFIG_MACH_EZX_A910 */
 
 #ifdef CONFIG_MACH_EZX_E2
-static unsigned int e2_key_map[] = {
+static const unsigned int e2_key_map[] = {
 	KEY(0, 0, KEY_NUMERIC_6),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_NUMERIC_9),
@@ -657,11 +677,15 @@ static unsigned int e2_key_map[] = {
 	KEY(4, 5, KEY_RESERVED),
 };
 
+static struct matrix_keymap_data e2_matrix_keymap_data = {
+	.keymap			= e2_key_map,
+	.keymap_size		= ARRAY_SIZE(e2_key_map),
+};
+
 static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
 	.matrix_key_rows = 5,
 	.matrix_key_cols = 6,
-	.matrix_key_map = e2_key_map,
-	.matrix_key_map_size = ARRAY_SIZE(e2_key_map),
+	.matrix_keymap_data = &e2_matrix_keymap_data,
 
 	.debounce_interval = 30,
 };

arch/arm/mach-pxa/littleton.c

@@ -222,7 +222,7 @@ static inline void littleton_init_spi(void) {}
 #endif
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int littleton_matrix_key_map[] = {
+static const unsigned int littleton_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
 	KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
@@ -249,11 +249,15 @@ static unsigned int littleton_matrix_key_map[] = {
 	KEY(3, 1, KEY_F23),	/* soft2 */
 };
 
+static struct matrix_keymap_data littleton_matrix_keymap_data = {
+	.keymap			= littleton_matrix_key_map,
+	.keymap_size		= ARRAY_SIZE(littleton_matrix_key_map),
+};
+
 static struct pxa27x_keypad_platform_data littleton_keypad_info = {
 	.matrix_key_rows	= 6,
 	.matrix_key_cols	= 5,
-	.matrix_key_map		= littleton_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(littleton_matrix_key_map),
+	.matrix_keymap_data	= &littleton_matrix_keymap_data,
 
 	.enable_rotary0		= 1,
 	.rotary0_up_key		= KEY_UP,

arch/arm/mach-pxa/mainstone.c

@@ -498,7 +498,7 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = {
 };
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int mainstone_matrix_keys[] = {
+static const unsigned int mainstone_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
 	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
 	KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I),
@@ -527,11 +527,15 @@ static unsigned int mainstone_matrix_keys[] = {
 	KEY(4, 6, KEY_SELECT),
 };
 
+static struct matrix_keymap_data mainstone_matrix_keymap_data = {
+	.keymap			= mainstone_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(mainstone_matrix_keys),
+};
+
 struct pxa27x_keypad_platform_data mainstone_keypad_info = {
 	.matrix_key_rows	= 6,
 	.matrix_key_cols	= 7,
-	.matrix_key_map		= mainstone_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(mainstone_matrix_keys),
+	.matrix_keymap_data	= &mainstone_matrix_keymap_data,
 
 	.enable_rotary0		= 1,
 	.rotary0_up_key		= KEY_UP,

arch/arm/mach-pxa/mioa701.c

@@ -222,7 +222,7 @@ static struct pxafb_mach_info mioa701_pxafb_info = {
 /*
  * Keyboard configuration
  */
-static unsigned int mioa701_matrix_keys[] = {
+static const unsigned int mioa701_matrix_keys[] = {
 	KEY(0, 0, KEY_UP),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_MEDIA),
@@ -233,11 +233,16 @@ static unsigned int mioa701_matrix_keys[] = {
 	KEY(2, 1, KEY_PHONE),	/* Phone Green key */
 	KEY(2, 2, KEY_CAMERA)	/* Camera key */
 };
+
+static struct matrix_keymap_data mioa701_matrix_keymap_data = {
+	.keymap			= mioa701_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(mioa701_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
 	.matrix_key_rows = 3,
 	.matrix_key_cols = 3,
-	.matrix_key_map = mioa701_matrix_keys,
-	.matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys),
+	.matrix_keymap_data = &mioa701_matrix_keymap_data,
 };
 
 /*

arch/arm/mach-pxa/palmld.c

@@ -173,7 +173,7 @@ static inline void palmld_nor_init(void) {}
  * GPIO keyboard
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmld_matrix_keys[] = {
+static const unsigned int palmld_matrix_keys[] = {
 	KEY(0, 1, KEY_F2),
 	KEY(0, 2, KEY_UP),
 
@@ -190,11 +190,15 @@ static unsigned int palmld_matrix_keys[] = {
 	KEY(3, 2, KEY_LEFT),
 };
 
+static struct matrix_keymap_data palmld_matrix_keymap_data = {
+	.keymap			= palmld_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(palmld_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data palmld_keypad_platform_data = {
 	.matrix_key_rows	= 4,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmld_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmld_matrix_keys),
+	.matrix_keymap_data	= &palmld_matrix_keymap_data,
 
 	.debounce_interval	= 30,
 };

arch/arm/mach-pxa/palmt5.c

@@ -108,7 +108,7 @@ static unsigned long palmt5_pin_config[] __initdata = {
  * GPIO keyboard
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmt5_matrix_keys[] = {
+static const unsigned int palmt5_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
 	KEY(0, 2, KEY_ENTER),
@@ -124,11 +124,15 @@ static unsigned int palmt5_matrix_keys[] = {
 	KEY(3, 2, KEY_LEFT),
 };
 
+static struct matrix_keymap_data palmt5_matrix_keymap_data = {
+	.keymap			= palmt5_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(palmt5_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
 	.matrix_key_rows	= 4,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmt5_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmt5_matrix_keys),
+	.matrix_keymap_data	= &palmt5_matrix_keymap_data,
 
 	.debounce_interval	= 30,
 };

arch/arm/mach-pxa/palmtreo.c

@@ -168,7 +168,7 @@ static unsigned long centro685_pin_config[] __initdata = {
  * GPIO keyboard
  ******************************************************************************/
 #if IS_ENABLED(CONFIG_KEYBOARD_PXA27x)
-static unsigned int treo680_matrix_keys[] = {
+static const unsigned int treo680_matrix_keys[] = {
 	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
 	KEY(0, 1, KEY_LEFT),
 	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
@@ -227,7 +227,7 @@ static unsigned int treo680_matrix_keys[] = {
 	KEY(7, 5, KEY_I),
 };
 
-static unsigned int centro_matrix_keys[] = {
+static const unsigned int centro_matrix_keys[] = {
 	KEY(0, 0, KEY_F9),		/* Home */
 	KEY(0, 1, KEY_LEFT),
 	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
@@ -286,11 +286,20 @@ static unsigned int centro_matrix_keys[] = {
 	KEY(7, 5, KEY_I),
 };
 
+static struct matrix_keymap_data treo680_matrix_keymap_data = {
+	.keymap			= treo680_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(treo680_matrix_keys),
+};
+
+static struct matrix_keymap_data centro_matrix_keymap_data = {
+	.keymap			= centro_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(centro_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data treo680_keypad_pdata = {
 	.matrix_key_rows	= 8,
 	.matrix_key_cols	= 7,
-	.matrix_key_map		= treo680_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(treo680_matrix_keys),
+	.matrix_keymap_data	= &treo680_matrix_keymap_data,
 	.direct_key_map		= { KEY_CONNECT },
 	.direct_key_num		= 1,
 
@@ -301,10 +310,8 @@ static void __init palmtreo_kpc_init(void)
 {
 	static struct pxa27x_keypad_platform_data *data = &treo680_keypad_pdata;
 
-	if (machine_is_centro()) {
-		data->matrix_key_map = centro_matrix_keys;
-		data->matrix_key_map_size = ARRAY_SIZE(centro_matrix_keys);
-	}
+	if (machine_is_centro())
+		data->matrix_keymap_data = &centro_matrix_keymap_data;
 
 	pxa_set_keypad_info(&treo680_keypad_pdata);
 }

arch/arm/mach-pxa/palmtx.c

@@ -176,7 +176,7 @@ static inline void palmtx_nor_init(void) {}
  * GPIO keyboard
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmtx_matrix_keys[] = {
+static const unsigned int palmtx_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
 	KEY(0, 2, KEY_ENTER),
@@ -192,11 +192,15 @@ static unsigned int palmtx_matrix_keys[] = {
 	KEY(3, 2, KEY_LEFT),
 };
 
+static struct matrix_keymap_data palmtx_matrix_keymap_data = {
+	.keymap			= palmtx_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(palmtx_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
 	.matrix_key_rows	= 4,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmtx_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmtx_matrix_keys),
+	.matrix_keymap_data	= &palmtx_matrix_keymap_data,
 
 	.debounce_interval	= 30,
 };

arch/arm/mach-pxa/palmz72.c

@@ -140,7 +140,7 @@ static unsigned long palmz72_pin_config[] __initdata = {
  * GPIO keyboard
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int palmz72_matrix_keys[] = {
+static const unsigned int palmz72_matrix_keys[] = {
 	KEY(0, 0, KEY_POWER),
 	KEY(0, 1, KEY_F1),
 	KEY(0, 2, KEY_ENTER),
@@ -156,11 +156,15 @@ static unsigned int palmz72_matrix_keys[] = {
 	KEY(3, 2, KEY_LEFT),
 };
 
+static struct matrix_keymap_data almz72_matrix_keymap_data = {
+	.keymap			= palmz72_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(palmz72_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
 	.matrix_key_rows	= 4,
 	.matrix_key_cols	= 3,
-	.matrix_key_map		= palmz72_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(palmz72_matrix_keys),
+	.matrix_keymap_data	= &almz72_matrix_keymap_data,
 
 	.debounce_interval	= 30,
 };

arch/arm/mach-pxa/tavorevb.c

@@ -106,7 +106,7 @@ static struct platform_device smc91x_device = {
 };
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int tavorevb_matrix_key_map[] = {
+static const unsigned int tavorevb_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(0, 4, KEY_A), KEY(0, 5, KEY_B), KEY(0, 6, KEY_C),
 	KEY(1, 4, KEY_E), KEY(1, 5, KEY_F), KEY(1, 6, KEY_G),
@@ -147,11 +147,15 @@ static unsigned int tavorevb_matrix_key_map[] = {
 	KEY(3, 3, KEY_F23),	/* soft2 */
 };
 
+static struct matrix_keymap_data tavorevb_matrix_keymap_data = {
+	.keymap		= tavorevb_matrix_key_map,
+	.keymap_size	= ARRAY_SIZE(tavorevb_matrix_key_map),
+};
+
 static struct pxa27x_keypad_platform_data tavorevb_keypad_info = {
 	.matrix_key_rows	= 7,
 	.matrix_key_cols	= 7,
-	.matrix_key_map		= tavorevb_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(tavorevb_matrix_key_map),
+	.matrix_keymap_data	= &tavorevb_matrix_keymap_data,
 	.debounce_interval	= 30,
 };
 

arch/arm/mach-pxa/z2.c

@@ -345,7 +345,7 @@ static inline void z2_leds_init(void) {}
  * GPIO keyboard
  ******************************************************************************/
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int z2_matrix_keys[] = {
+static const unsigned int z2_matrix_keys[] = {
 	KEY(0, 0, KEY_OPTION),
 	KEY(1, 0, KEY_UP),
 	KEY(2, 0, KEY_DOWN),
@@ -405,11 +405,15 @@ static unsigned int z2_matrix_keys[] = {
 	KEY(5, 7, KEY_DOT),
 };
 
+static struct matrix_keymap_data z2_matrix_keymap_data = {
+	.keymap			= z2_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(z2_matrix_keys),
+};
+
 static struct pxa27x_keypad_platform_data z2_keypad_platform_data = {
 	.matrix_key_rows	= 7,
 	.matrix_key_cols	= 8,
-	.matrix_key_map		= z2_matrix_keys,
-	.matrix_key_map_size	= ARRAY_SIZE(z2_matrix_keys),
+	.matrix_keymap_data	= &z2_matrix_keymap_data,
 
 	.debounce_interval	= 30,
 };

arch/arm/mach-pxa/zylonite.c

@@ -263,7 +263,7 @@ static inline void zylonite_init_mmc(void) {}
 #endif
 
 #if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
-static unsigned int zylonite_matrix_key_map[] = {
+static const unsigned int zylonite_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
 	KEY(1, 0, KEY_E), KEY(1, 1, KEY_F), KEY(1, 2, KEY_G), KEY(1, 5, KEY_H),
@@ -306,11 +306,15 @@ static unsigned int zylonite_matrix_key_map[] = {
 	KEY(0, 3, KEY_AUX),	/* contact */
 };
 
+static struct matrix_keymap_data zylonite_matrix_keymap_data = {
+	.keymap			= zylonite_matrix_key_map,
+	.keymap_size		= ARRAY_SIZE(zylonite_matrix_key_map),
+};
+
 static struct pxa27x_keypad_platform_data zylonite_keypad_info = {
 	.matrix_key_rows	= 8,
 	.matrix_key_cols	= 8,
-	.matrix_key_map		= zylonite_matrix_key_map,
-	.matrix_key_map_size	= ARRAY_SIZE(zylonite_matrix_key_map),
+	.matrix_keymap_data	= &zylonite_matrix_keymap_data,
 
 	.enable_rotary0		= 1,
 	.rotary0_up_key		= KEY_UP,

drivers/hid/hid-apple.c

@@ -524,6 +524,12 @@ static const struct hid_device_id apple_devices[] = {
 		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
 		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI),
+		.driver_data = APPLE_HAS_FN },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO),
+		.driver_data = APPLE_HAS_FN | APPLE_ISO_KEYBOARD },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS),
+		.driver_data = APPLE_HAS_FN | APPLE_RDESC_JIS },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),

drivers/hid/hid-core.c

@@ -1547,6 +1547,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
@@ -2189,6 +2192,9 @@ static const struct hid_device_id hid_mouse_ignore_list[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_ISO) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING8_JIS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
 	{ }

drivers/hid/hid-ids.h

@@ -135,6 +135,9 @@
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS   0x023b
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI  0x0255
 #define USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO   0x0256
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0291
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0292
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0293
 #define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY	0x030a
 #define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY	0x030b
 #define USB_DEVICE_ID_APPLE_IRCONTROL	0x8240

drivers/input/evdev.c

@@ -52,6 +52,82 @@ struct evdev_client {
 	struct input_event buffer[];
 };
 
+/* flush queued events of type @type, caller must hold client->buffer_lock */
+static void __evdev_flush_queue(struct evdev_client *client, unsigned int type)
+{
+	unsigned int i, head, num;
+	unsigned int mask = client->bufsize - 1;
+	bool is_report;
+	struct input_event *ev;
+
+	BUG_ON(type == EV_SYN);
+
+	head = client->tail;
+	client->packet_head = client->tail;
+
+	/* init to 1 so a leading SYN_REPORT will not be dropped */
+	num = 1;
+
+	for (i = client->tail; i != client->head; i = (i + 1) & mask) {
+		ev = &client->buffer[i];
+		is_report = ev->type == EV_SYN && ev->code == SYN_REPORT;
+
+		if (ev->type == type) {
+			/* drop matched entry */
+			continue;
+		} else if (is_report && !num) {
+			/* drop empty SYN_REPORT groups */
+			continue;
+		} else if (head != i) {
+			/* move entry to fill the gap */
+			client->buffer[head].time = ev->time;
+			client->buffer[head].type = ev->type;
+			client->buffer[head].code = ev->code;
+			client->buffer[head].value = ev->value;
+		}
+
+		num++;
+		head = (head + 1) & mask;
+
+		if (is_report) {
+			num = 0;
+			client->packet_head = head;
+		}
+	}
+
+	client->head = head;
+}
+
+/* queue SYN_DROPPED event */
+static void evdev_queue_syn_dropped(struct evdev_client *client)
+{
+	unsigned long flags;
+	struct input_event ev;
+	ktime_t time;
+
+	time = ktime_get();
+	if (client->clkid != CLOCK_MONOTONIC)
+		time = ktime_sub(time, ktime_get_monotonic_offset());
+
+	ev.time = ktime_to_timeval(time);
+	ev.type = EV_SYN;
+	ev.code = SYN_DROPPED;
+	ev.value = 0;
+
+	spin_lock_irqsave(&client->buffer_lock, flags);
+
+	client->buffer[client->head++] = ev;
+	client->head &= client->bufsize - 1;
+
+	if (unlikely(client->head == client->tail)) {
+		/* drop queue but keep our SYN_DROPPED event */
+		client->tail = (client->head - 1) & (client->bufsize - 1);
+		client->packet_head = client->tail;
+	}
+
+	spin_unlock_irqrestore(&client->buffer_lock, flags);
+}
+
 static void __pass_event(struct evdev_client *client,
 			 const struct input_event *event)
 {
@@ -650,6 +726,51 @@ static int evdev_handle_set_keycode_v2(struct input_dev *dev, void __user *p)
 	return input_set_keycode(dev, &ke);
 }
 
+/*
+ * If we transfer state to the user, we should flush all pending events
+ * of the same type from the client's queue. Otherwise, they might end up
+ * with duplicate events, which can screw up client's state tracking.
+ * If bits_to_user fails after flushing the queue, we queue a SYN_DROPPED
+ * event so user-space will notice missing events.
+ *
+ * LOCKING:
+ * We need to take event_lock before buffer_lock to avoid dead-locks. But we
+ * need the even_lock only to guarantee consistent state. We can safely release
+ * it while flushing the queue. This allows input-core to handle filters while
+ * we flush the queue.
+ */
+static int evdev_handle_get_val(struct evdev_client *client,
+				struct input_dev *dev, unsigned int type,
+				unsigned long *bits, unsigned int max,
+				unsigned int size, void __user *p, int compat)
+{
+	int ret;
+	unsigned long *mem;
+
+	mem = kmalloc(sizeof(unsigned long) * max, GFP_KERNEL);
+	if (!mem)
+		return -ENOMEM;
+
+	spin_lock_irq(&dev->event_lock);
+	spin_lock(&client->buffer_lock);
+
+	memcpy(mem, bits, sizeof(unsigned long) * max);
+
+	spin_unlock(&dev->event_lock);
+
+	__evdev_flush_queue(client, type);
+
+	spin_unlock_irq(&client->buffer_lock);
+
+	ret = bits_to_user(mem, max, size, p, compat);
+	if (ret < 0)
+		evdev_queue_syn_dropped(client);
+
+	kfree(mem);
+
+	return ret;
+}
+
 static int evdev_handle_mt_request(struct input_dev *dev,
 				   unsigned int size,
 				   int __user *ip)
@@ -771,16 +892,20 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd,
 		return evdev_handle_mt_request(dev, size, ip);
 
 	case EVIOCGKEY(0):
-		return bits_to_user(dev->key, KEY_MAX, size, p, compat_mode);
+		return evdev_handle_get_val(client, dev, EV_KEY, dev->key,
+					    KEY_MAX, size, p, compat_mode);
 
 	case EVIOCGLED(0):
-		return bits_to_user(dev->led, LED_MAX, size, p, compat_mode);
+		return evdev_handle_get_val(client, dev, EV_LED, dev->led,
+					    LED_MAX, size, p, compat_mode);
 
 	case EVIOCGSND(0):
-		return bits_to_user(dev->snd, SND_MAX, size, p, compat_mode);
+		return evdev_handle_get_val(client, dev, EV_SND, dev->snd,
+					    SND_MAX, size, p, compat_mode);
 
 	case EVIOCGSW(0):
-		return bits_to_user(dev->sw, SW_MAX, size, p, compat_mode);
+		return evdev_handle_get_val(client, dev, EV_SW, dev->sw,
+					    SW_MAX, size, p, compat_mode);
 
 	case EVIOCGNAME(0):
 		return str_to_user(dev->name, size, p);

drivers/input/keyboard/Kconfig

@@ -418,6 +418,16 @@ config KEYBOARD_NOMADIK
 	  To compile this driver as a module, choose M here: the
 	  module will be called nmk-ske-keypad.
 
+config KEYBOARD_NSPIRE
+	tristate "TI-NSPIRE built-in keyboard"
+	depends on ARCH_NSPIRE && OF
+	select INPUT_MATRIXKMAP
+	help
+	  Say Y here if you want to use the built-in keypad on TI-NSPIRE.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nspire-keypad.
+
 config KEYBOARD_TEGRA
 	tristate "NVIDIA Tegra internal matrix keyboard controller support"
 	depends on ARCH_TEGRA && OF
@@ -442,6 +452,7 @@ config KEYBOARD_OPENCORES
 config KEYBOARD_PXA27x
 	tristate "PXA27x/PXA3xx keypad support"
 	depends on PXA27x || PXA3xx || ARCH_MMP
+	select INPUT_MATRIXKMAP
 	help
 	  Enable support for PXA27x/PXA3xx keypad controller.
 

drivers/input/keyboard/Makefile

@@ -36,6 +36,7 @@ obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
 obj-$(CONFIG_KEYBOARD_MPR121)		+= mpr121_touchkey.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_NOMADIK)		+= nomadik-ske-keypad.o
+obj-$(CONFIG_KEYBOARD_NSPIRE)		+= nspire-keypad.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
 obj-$(CONFIG_KEYBOARD_OMAP4)		+= omap4-keypad.o
 obj-$(CONFIG_KEYBOARD_OPENCORES)	+= opencores-kbd.o

drivers/input/keyboard/amikbd.c

@@ -246,7 +246,6 @@ static int __exit amikbd_remove(struct platform_device *pdev)
 {
 	struct input_dev *dev = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	free_irq(IRQ_AMIGA_CIAA_SP, dev);
 	input_unregister_device(dev);
 	return 0;

drivers/input/keyboard/bf54x-keys.c

@@ -326,7 +326,6 @@ static int bfin_kpad_probe(struct platform_device *pdev)
 	kfree(bf54x_kpad->keycode);
 out:
 	kfree(bf54x_kpad);
-	platform_set_drvdata(pdev, NULL);
 
 	return error;
 }
@@ -346,7 +345,6 @@ static int bfin_kpad_remove(struct platform_device *pdev)
 
 	kfree(bf54x_kpad->keycode);
 	kfree(bf54x_kpad);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/input/keyboard/davinci_keyscan.c

@@ -314,8 +314,6 @@ static int davinci_ks_remove(struct platform_device *pdev)
 	iounmap(davinci_ks->base);
 	release_mem_region(davinci_ks->pbase, davinci_ks->base_size);
 
-	platform_set_drvdata(pdev, NULL);
-
 	kfree(davinci_ks);
 
 	return 0;

drivers/input/keyboard/ep93xx_keypad.c

@@ -329,8 +329,7 @@ static int ep93xx_keypad_probe(struct platform_device *pdev)
 	return 0;
 
 failed_free_irq:
-	free_irq(keypad->irq, pdev);
-	platform_set_drvdata(pdev, NULL);
+	free_irq(keypad->irq, keypad);
 failed_free_dev:
 	input_free_device(input_dev);
 failed_put_clk:
@@ -351,9 +350,7 @@ static int ep93xx_keypad_remove(struct platform_device *pdev)
 	struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
 	struct resource *res;
 
-	free_irq(keypad->irq, pdev);
-
-	platform_set_drvdata(pdev, NULL);
+	free_irq(keypad->irq, keypad);
 
 	if (keypad->enabled)
 		clk_disable(keypad->clk);

drivers/input/keyboard/gpio_keys.c

@@ -767,7 +767,6 @@ static int gpio_keys_probe(struct platform_device *pdev)
 	while (--i >= 0)
 		gpio_remove_key(&ddata->data[i]);
 
-	platform_set_drvdata(pdev, NULL);
  fail1:
 	input_free_device(input);
 	kfree(ddata);

drivers/input/keyboard/gpio_keys_polled.c

@@ -324,7 +324,6 @@ static int gpio_keys_polled_probe(struct platform_device *pdev)
 
 err_free_bdev:
 	kfree(bdev);
-	platform_set_drvdata(pdev, NULL);
 
 err_free_pdata:
 	/* If we have no platform_data, we allocated pdata dynamically.  */
@@ -355,7 +354,6 @@ static int gpio_keys_polled_remove(struct platform_device *pdev)
 		kfree(pdata);
 
 	kfree(bdev);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/input/keyboard/jornada680_kbd.c

@@ -233,7 +233,6 @@ static int jornada680kbd_probe(struct platform_device *pdev)
  failed:
 	printk(KERN_ERR "Jornadakbd: failed to register driver, error: %d\n",
 		error);
-	platform_set_drvdata(pdev, NULL);
 	input_free_polled_device(poll_dev);
 	kfree(jornadakbd);
 	return error;
@@ -244,7 +243,6 @@ static int jornada680kbd_remove(struct platform_device *pdev)
 {
 	struct jornadakbd *jornadakbd = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	input_unregister_polled_device(jornadakbd->poll_dev);
 	input_free_polled_device(jornadakbd->poll_dev);
 	kfree(jornadakbd);

drivers/input/keyboard/jornada720_kbd.c

@@ -146,7 +146,6 @@ static int jornada720_kbd_probe(struct platform_device *pdev)
  fail2:	/* IRQ, DEVICE, MEMORY */
 	free_irq(IRQ_GPIO0, pdev);
  fail1:	/* DEVICE, MEMORY */
-	platform_set_drvdata(pdev, NULL);
 	input_free_device(input_dev);
 	kfree(jornadakbd);
 	return err;
@@ -157,7 +156,6 @@ static int jornada720_kbd_remove(struct platform_device *pdev)
 	struct jornadakbd *jornadakbd = platform_get_drvdata(pdev);
 
 	free_irq(IRQ_GPIO0, pdev);
-	platform_set_drvdata(pdev, NULL);
 	input_unregister_device(jornadakbd->input);
 	kfree(jornadakbd);
 

drivers/input/keyboard/matrix_keypad.c

@@ -549,8 +549,6 @@ static int matrix_keypad_remove(struct platform_device *pdev)
 	input_unregister_device(keypad->input_dev);
 	kfree(keypad);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/keyboard/nspire-keypad.c

+/*
+ *  Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/input/matrix_keypad.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#define KEYPAD_SCAN_MODE	0x00
+#define KEYPAD_CNTL		0x04
+#define KEYPAD_INT		0x08
+#define KEYPAD_INTMSK		0x0C
+
+#define KEYPAD_DATA		0x10
+#define KEYPAD_GPIO		0x30
+
+#define KEYPAD_UNKNOWN_INT	0x40
+#define KEYPAD_UNKNOWN_INT_STS	0x44
+
+#define KEYPAD_BITMASK_COLS	11
+#define KEYPAD_BITMASK_ROWS	8
+
+struct nspire_keypad {
+	void __iomem *reg_base;
+	u32 int_mask;
+
+	struct input_dev *input;
+	struct clk *clk;
+
+	struct matrix_keymap_data *keymap;
+	int row_shift;
+
+	/* Maximum delay estimated assuming 33MHz APB */
+	u32 scan_interval;	/* In microseconds (~2000us max) */
+	u32 row_delay;		/* In microseconds (~500us max) */
+
+	u16 state[KEYPAD_BITMASK_ROWS];
+
+	bool active_low;
+};
+
+static irqreturn_t nspire_keypad_irq(int irq, void *dev_id)
+{
+	struct nspire_keypad *keypad = dev_id;
+	struct input_dev *input = keypad->input;
+	unsigned short *keymap = input->keycode;
+	unsigned int code;
+	int row, col;
+	u32 int_sts;
+	u16 state[8];
+	u16 bits, changed;
+
+	int_sts = readl(keypad->reg_base + KEYPAD_INT) & keypad->int_mask;
+	if (!int_sts)
+		return IRQ_NONE;
+
+	memcpy_fromio(state, keypad->reg_base + KEYPAD_DATA, sizeof(state));
+
+	for (row = 0; row < KEYPAD_BITMASK_ROWS; row++) {
+		bits = state[row];
+		if (keypad->active_low)
+			bits = ~bits;
+
+		changed = bits ^ keypad->state[row];
+		if (!changed)
+			continue;
+
+		keypad->state[row] = bits;
+
+		for (col = 0; col < KEYPAD_BITMASK_COLS; col++) {
+			if (!(changed & (1U << col)))
+				continue;
+
+			code = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+			input_event(input, EV_MSC, MSC_SCAN, code);
+			input_report_key(input, keymap[code],
+					 bits & (1U << col));
+		}
+	}
+
+	input_sync(input);
+
+	writel(0x3, keypad->reg_base + KEYPAD_INT);
+
+	return IRQ_HANDLED;
+}
+
+static int nspire_keypad_chip_init(struct nspire_keypad *keypad)
+{
+	unsigned long val = 0, cycles_per_us, delay_cycles, row_delay_cycles;
+
+	cycles_per_us = (clk_get_rate(keypad->clk) / 1000000);
+	if (cycles_per_us == 0)
+		cycles_per_us = 1;
+
+	delay_cycles = cycles_per_us * keypad->scan_interval;
+	WARN_ON(delay_cycles >= (1 << 16)); /* Overflow */
+	delay_cycles &= 0xffff;
+
+	row_delay_cycles = cycles_per_us * keypad->row_delay;
+	WARN_ON(row_delay_cycles >= (1 << 14)); /* Overflow */
+	row_delay_cycles &= 0x3fff;
+
+	val |= 3 << 0; /* Set scan mode to 3 (continuous scan) */
+	val |= row_delay_cycles << 2; /* Delay between scanning each row */
+	val |= delay_cycles << 16; /* Delay between scans */
+	writel(val, keypad->reg_base + KEYPAD_SCAN_MODE);
+
+	val = (KEYPAD_BITMASK_ROWS & 0xff) | (KEYPAD_BITMASK_COLS & 0xff)<<8;
+	writel(val, keypad->reg_base + KEYPAD_CNTL);
+
+	/* Enable interrupts */
+	keypad->int_mask = 1 << 1;
+	writel(keypad->int_mask, keypad->reg_base + 0xc);
+
+	/* Disable GPIO interrupts to prevent hanging on touchpad */
+	/* Possibly used to detect touchpad events */
+	writel(0, keypad->reg_base + KEYPAD_UNKNOWN_INT);
+	/* Acknowledge existing interrupts */
+	writel(~0, keypad->reg_base + KEYPAD_UNKNOWN_INT_STS);
+
+	return 0;
+}
+
+static int nspire_keypad_open(struct input_dev *input)
+{
+	struct nspire_keypad *keypad = input_get_drvdata(input);
+	int error;
+
+	error = clk_prepare_enable(keypad->clk);
+	if (error)
+		return error;
+
+	error = nspire_keypad_chip_init(keypad);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static void nspire_keypad_close(struct input_dev *input)
+{
+	struct nspire_keypad *keypad = input_get_drvdata(input);
+
+	clk_disable_unprepare(keypad->clk);
+}
+
+static int nspire_keypad_probe(struct platform_device *pdev)
+{
+	const struct device_node *of_node = pdev->dev.of_node;
+	struct nspire_keypad *keypad;
+	struct input_dev *input;
+	struct resource *res;
+	int irq;
+	int error;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "failed to get keypad irq\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing platform resources\n");
+		return -EINVAL;
+	}
+
+	keypad = devm_kzalloc(&pdev->dev, sizeof(struct nspire_keypad),
+			      GFP_KERNEL);
+	if (!keypad) {
+		dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+		return -ENOMEM;
+	}
+
+	keypad->row_shift = get_count_order(KEYPAD_BITMASK_COLS);
+
+	error = of_property_read_u32(of_node, "scan-interval",
+				     &keypad->scan_interval);
+	if (error) {
+		dev_err(&pdev->dev, "failed to get scan-interval\n");
+		return error;
+	}
+
+	error = of_property_read_u32(of_node, "row-delay",
+				     &keypad->row_delay);
+	if (error) {
+		dev_err(&pdev->dev, "failed to get row-delay\n");
+		return error;
+	}
+
+	keypad->active_low = of_property_read_bool(of_node, "active-low");
+
+	keypad->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "unable to get clock\n");
+		return PTR_ERR(keypad->clk);
+	}
+
+	keypad->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(keypad->reg_base))
+		return PTR_ERR(keypad->reg_base);
+
+	keypad->input = input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_set_drvdata(input, keypad);
+
+	input->id.bustype = BUS_HOST;
+	input->name = "nspire-keypad";
+	input->open = nspire_keypad_open;
+	input->close = nspire_keypad_close;
+
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(EV_REP, input->evbit);
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   KEYPAD_BITMASK_ROWS,
+					   KEYPAD_BITMASK_COLS,
+					   NULL, input);
+	if (error) {
+		dev_err(&pdev->dev, "building keymap failed\n");
+		return error;
+	}
+
+	error = devm_request_irq(&pdev->dev, irq, nspire_keypad_irq, 0,
+				 "nspire_keypad", keypad);
+	if (error) {
+		dev_err(&pdev->dev, "allocate irq %d failed\n", irq);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev,
+			"unable to register input device: %d\n", error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, keypad);
+
+	dev_dbg(&pdev->dev,
+		"TI-NSPIRE keypad at %pR (scan_interval=%uus, row_delay=%uus%s)\n",
+		res, keypad->row_delay, keypad->scan_interval,
+		keypad->active_low ? ", active_low" : "");
+
+	return 0;
+}
+
+static const struct of_device_id nspire_keypad_dt_match[] = {
+	{ .compatible = "ti,nspire-keypad" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, nspire_keypad_dt_match);
+
+static struct platform_driver nspire_keypad_driver = {
+	.driver = {
+		.name = "nspire-keypad",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(nspire_keypad_dt_match),
+	},
+	.probe = nspire_keypad_probe,
+};
+
+module_platform_driver(nspire_keypad_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("TI-NSPIRE Keypad Driver");

drivers/input/keyboard/omap4-keypad.c

@@ -419,8 +419,6 @@ static int omap4_keypad_remove(struct platform_device *pdev)
 	kfree(keypad_data->keymap);
 	kfree(keypad_data);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/keyboard/opencores-kbd.c

@@ -151,8 +151,6 @@ static int opencores_kbd_remove(struct platform_device *pdev)
 	input_unregister_device(opencores_kbd->input);
 	kfree(opencores_kbd);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/keyboard/pmic8xxx-keypad.c

@@ -707,7 +707,6 @@ static int pmic8xxx_kp_probe(struct platform_device *pdev)
 err_get_irq:
 	input_free_device(kp->input);
 err_alloc_device:
-	platform_set_drvdata(pdev, NULL);
 	kfree(kp);
 	return rc;
 }
@@ -722,7 +721,6 @@ static int pmic8xxx_kp_remove(struct platform_device *pdev)
 	input_unregister_device(kp->input);
 	kfree(kp);
 
-	platform_set_drvdata(pdev, NULL);
 	return 0;
 }
 

drivers/input/keyboard/pxa930_rotary.c

@@ -181,7 +181,6 @@ static int pxa930_rotary_remove(struct platform_device *pdev)
 	free_irq(platform_get_irq(pdev, 0), r);
 	input_unregister_device(r->input_dev);
 	iounmap(r->mmio_base);
-	platform_set_drvdata(pdev, NULL);
 	kfree(r);
 
 	return 0;

drivers/input/keyboard/samsung-keypad.c

@@ -24,7 +24,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/sched.h>
 #include <linux/input/samsung-keypad.h>
 
@@ -79,10 +78,6 @@ struct samsung_keypad {
 	unsigned int rows;
 	unsigned int cols;
 	unsigned int row_state[SAMSUNG_MAX_COLS];
-#ifdef CONFIG_OF
-	int row_gpios[SAMSUNG_MAX_ROWS];
-	int col_gpios[SAMSUNG_MAX_COLS];
-#endif
 	unsigned short keycodes[];
 };
 
@@ -304,45 +299,6 @@ static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
 
 	return pdata;
 }
-
-static void samsung_keypad_parse_dt_gpio(struct device *dev,
-				struct samsung_keypad *keypad)
-{
-	struct device_node *np = dev->of_node;
-	int gpio, error, row, col;
-
-	for (row = 0; row < keypad->rows; row++) {
-		gpio = of_get_named_gpio(np, "row-gpios", row);
-		keypad->row_gpios[row] = gpio;
-		if (!gpio_is_valid(gpio)) {
-			dev_err(dev, "keypad row[%d]: invalid gpio %d\n",
-					row, gpio);
-			continue;
-		}
-
-		error = devm_gpio_request(dev, gpio, "keypad-row");
-		if (error)
-			dev_err(dev,
-				"keypad row[%d] gpio request failed: %d\n",
-				row, error);
-	}
-
-	for (col = 0; col < keypad->cols; col++) {
-		gpio = of_get_named_gpio(np, "col-gpios", col);
-		keypad->col_gpios[col] = gpio;
-		if (!gpio_is_valid(gpio)) {
-			dev_err(dev, "keypad column[%d]: invalid gpio %d\n",
-					col, gpio);
-			continue;
-		}
-
-		error = devm_gpio_request(dev, gpio, "keypad-col");
-		if (error)
-			dev_err(dev,
-				"keypad column[%d] gpio request failed: %d\n",
-				col, error);
-	}
-}
 #else
 static
 struct samsung_keypad_platdata *samsung_keypad_parse_dt(struct device *dev)
@@ -424,15 +380,11 @@ static int samsung_keypad_probe(struct platform_device *pdev)
 	keypad->stopped = true;
 	init_waitqueue_head(&keypad->wait);
 
-	if (pdev->dev.of_node) {
-#ifdef CONFIG_OF
-		samsung_keypad_parse_dt_gpio(&pdev->dev, keypad);
+	if (pdev->dev.of_node)
 		keypad->type = of_device_is_compatible(pdev->dev.of_node,
 					"samsung,s5pv210-keypad");
-#endif
-	} else {
+	else
 		keypad->type = platform_get_device_id(pdev)->driver_data;
-	}
 
 	input_dev->name = pdev->name;
 	input_dev->id.bustype = BUS_HOST;
@@ -487,7 +439,6 @@ static int samsung_keypad_probe(struct platform_device *pdev)
 err_disable_runtime_pm:
 	pm_runtime_disable(&pdev->dev);
 	device_init_wakeup(&pdev->dev, 0);
-	platform_set_drvdata(pdev, NULL);
 err_unprepare_clk:
 	clk_unprepare(keypad->clk);
 	return error;
@@ -499,7 +450,6 @@ static int samsung_keypad_remove(struct platform_device *pdev)
 
 	pm_runtime_disable(&pdev->dev);
 	device_init_wakeup(&pdev->dev, 0);
-	platform_set_drvdata(pdev, NULL);
 
 	input_unregister_device(keypad->input_dev);
 

drivers/input/keyboard/sh_keysc.c

@@ -266,7 +266,6 @@ static int sh_keysc_probe(struct platform_device *pdev)
  err2:
 	iounmap(priv->iomem_base);
  err1:
-	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
  err0:
 	return error;
@@ -285,7 +284,6 @@ static int sh_keysc_remove(struct platform_device *pdev)
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
-	platform_set_drvdata(pdev, NULL);
 	kfree(priv);
 
 	return 0;

drivers/input/keyboard/spear-keyboard.c

@@ -290,7 +290,6 @@ static int spear_kbd_remove(struct platform_device *pdev)
 	clk_unprepare(kbd->clk);
 
 	device_init_wakeup(&pdev->dev, 0);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/input/keyboard/tnetv107x-keypad.c

@@ -296,7 +296,6 @@ static int keypad_probe(struct platform_device *pdev)
 error_map:
 	release_mem_region(kp->res->start, resource_size(kp->res));
 error_res:
-	platform_set_drvdata(pdev, NULL);
 	kfree(kp);
 	return error;
 }
@@ -311,7 +310,6 @@ static int keypad_remove(struct platform_device *pdev)
 	clk_put(kp->clk);
 	iounmap(kp->regs);
 	release_mem_region(kp->res->start, resource_size(kp->res));
-	platform_set_drvdata(pdev, NULL);
 	kfree(kp);
 
 	return 0;

drivers/input/keyboard/twl4030_keypad.c

@@ -422,7 +422,7 @@ static int twl4030_kp_probe(struct platform_device *pdev)
 err3:
 	/* mask all events - we don't care about the result */
 	(void) twl4030_kpwrite_u8(kp, 0xff, KEYP_IMR1);
-	free_irq(kp->irq, NULL);
+	free_irq(kp->irq, kp);
 err2:
 	input_unregister_device(input);
 	input = NULL;
@@ -438,7 +438,6 @@ static int twl4030_kp_remove(struct platform_device *pdev)
 
 	free_irq(kp->irq, kp);
 	input_unregister_device(kp->input);
-	platform_set_drvdata(pdev, NULL);
 	kfree(kp);
 
 	return 0;

drivers/input/keyboard/w90p910_keypad.c

@@ -221,7 +221,7 @@ static int w90p910_keypad_probe(struct platform_device *pdev)
 	return 0;
 
 failed_free_irq:
-	free_irq(irq, pdev);
+	free_irq(irq, keypad);
 failed_put_clk:
 	clk_put(keypad->clk);
 failed_free_io:
@@ -239,7 +239,7 @@ static int w90p910_keypad_remove(struct platform_device *pdev)
 	struct w90p910_keypad *keypad = platform_get_drvdata(pdev);
 	struct resource *res;
 
-	free_irq(keypad->irq, pdev);
+	free_irq(keypad->irq, keypad);
 
 	clk_put(keypad->clk);
 
@@ -249,7 +249,6 @@ static int w90p910_keypad_remove(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));
 
-	platform_set_drvdata(pdev, NULL);
 	kfree(keypad);
 
 	return 0;

drivers/input/misc/Kconfig

@@ -637,4 +637,14 @@ config INPUT_XEN_KBDDEV_FRONTEND
 	  To compile this driver as a module, choose M here: the
 	  module will be called xen-kbdfront.
 
+config INPUT_SIRFSOC_ONKEY
+	bool "CSR SiRFSoC power on/off/suspend key support"
+	depends on ARCH_SIRF && OF
+	default y
+	help
+	  Say Y here if you want to support for the SiRFSoC power on/off/suspend key
+	  in Linux, after you press the onkey, system will suspend.
+
+	  If unsure, say N.
+
 endif

drivers/input/misc/Makefile

@@ -51,6 +51,7 @@ obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
 obj-$(CONFIG_INPUT_RETU_PWRBUTTON)	+= retu-pwrbutton.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
+obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o

drivers/input/misc/ab8500-ponkey.c

@@ -127,8 +127,6 @@ static int ab8500_ponkey_remove(struct platform_device *pdev)
 	input_unregister_device(ponkey->idev);
 	kfree(ponkey);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/misc/bfin_rotary.c

@@ -208,7 +208,6 @@ static int bfin_rotary_remove(struct platform_device *pdev)
 	peripheral_free_list(per_cnt);
 
 	kfree(rotary);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/input/misc/gpio_tilt_polled.c

@@ -184,8 +184,6 @@ static int gpio_tilt_polled_remove(struct platform_device *pdev)
 	struct gpio_tilt_polled_dev *tdev = platform_get_drvdata(pdev);
 	const struct gpio_tilt_platform_data *pdata = tdev->pdata;
 
-	platform_set_drvdata(pdev, NULL);
-
 	input_unregister_polled_device(tdev->poll_dev);
 	input_free_polled_device(tdev->poll_dev);
 

drivers/input/misc/ixp4xx-beeper.c

@@ -125,7 +125,7 @@ static int ixp4xx_spkr_probe(struct platform_device *dev)
 	return 0;
 
  err_free_irq:
-	free_irq(IRQ_IXP4XX_TIMER2, dev);
+	free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id);
  err_free_device:
 	input_free_device(input_dev);
 
@@ -138,13 +138,12 @@ static int ixp4xx_spkr_remove(struct platform_device *dev)
 	unsigned int pin = (unsigned int) input_get_drvdata(input_dev);
 
 	input_unregister_device(input_dev);
-	platform_set_drvdata(dev, NULL);
 
 	/* turn the speaker off */
 	disable_irq(IRQ_IXP4XX_TIMER2);
 	ixp4xx_spkr_control(pin, 0);
 
-	free_irq(IRQ_IXP4XX_TIMER2, dev);
+	free_irq(IRQ_IXP4XX_TIMER2, (void *)dev->id);
 
 	return 0;
 }

drivers/input/misc/m68kspkr.c

@@ -85,7 +85,6 @@ static int m68kspkr_remove(struct platform_device *dev)
 	struct input_dev *input_dev = platform_get_drvdata(dev);
 
 	input_unregister_device(input_dev);
-	platform_set_drvdata(dev, NULL);
 	/* turn off the speaker */
 	m68kspkr_event(NULL, EV_SND, SND_BELL, 0);
 

drivers/input/misc/max8925_onkey.c

@@ -148,8 +148,6 @@ static int max8925_onkey_remove(struct platform_device *pdev)
 	input_unregister_device(info->idev);
 	kfree(info);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/misc/mc13783-pwrbutton.c

@@ -250,7 +250,6 @@ static int mc13783_pwrbutton_remove(struct platform_device *pdev)
 
 	input_unregister_device(priv->pwr);
 	kfree(priv);
-	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }

drivers/input/misc/pcspkr.c

@@ -100,7 +100,6 @@ static int pcspkr_remove(struct platform_device *dev)
 	struct input_dev *pcspkr_dev = platform_get_drvdata(dev);
 
 	input_unregister_device(pcspkr_dev);
-	platform_set_drvdata(dev, NULL);
 	/* turn off the speaker */
 	pcspkr_event(NULL, EV_SND, SND_BELL, 0);
 

drivers/input/misc/pm8xxx-vibrator.c

@@ -249,8 +249,6 @@ static int pm8xxx_vib_remove(struct platform_device *pdev)
 	input_unregister_device(vib->vib_input_dev);
 	kfree(vib);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/misc/pmic8xxx-pwrkey.c

@@ -175,9 +175,8 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev)
 	return 0;
 
 free_press_irq:
-	free_irq(key_press_irq, NULL);
+	free_irq(key_press_irq, pwrkey);
 unreg_input_dev:
-	platform_set_drvdata(pdev, NULL);
 	input_unregister_device(pwr);
 	pwr = NULL;
 free_input_dev:
@@ -198,7 +197,6 @@ static int pmic8xxx_pwrkey_remove(struct platform_device *pdev)
 	free_irq(key_press_irq, pwrkey);
 	free_irq(key_release_irq, pwrkey);
 	input_unregister_device(pwrkey->pwr);
-	platform_set_drvdata(pdev, NULL);
 	kfree(pwrkey);
 
 	return 0;

drivers/input/misc/pwm-beeper.c

@@ -133,7 +133,6 @@ static int pwm_beeper_remove(struct platform_device *pdev)
 {
 	struct pwm_beeper *beeper = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	input_unregister_device(beeper->input);
 
 	pwm_disable(beeper->pwm);

drivers/input/misc/rotary_encoder.c

@@ -317,8 +317,6 @@ static int rotary_encoder_remove(struct platform_device *pdev)
 	if (!dev_get_platdata(&pdev->dev))
 		kfree(pdata);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/misc/sgi_btns.c

@@ -128,7 +128,7 @@ static int sgi_buttons_probe(struct platform_device *pdev)
 	__clear_bit(KEY_RESERVED, input->keybit);
 
 	bdev->poll_dev = poll_dev;
-	dev_set_drvdata(&pdev->dev, bdev);
+	platform_set_drvdata(pdev, bdev);
 
 	error = input_register_polled_device(poll_dev);
 	if (error)
@@ -139,19 +139,16 @@ static int sgi_buttons_probe(struct platform_device *pdev)
  err_free_mem:
 	input_free_polled_device(poll_dev);
 	kfree(bdev);
-	dev_set_drvdata(&pdev->dev, NULL);
 	return error;
 }
 
 static int sgi_buttons_remove(struct platform_device *pdev)
 {
-	struct device *dev = &pdev->dev;
-	struct buttons_dev *bdev = dev_get_drvdata(dev);
+	struct buttons_dev *bdev = platform_get_drvdata(pdev);
 
 	input_unregister_polled_device(bdev->poll_dev);
 	input_free_polled_device(bdev->poll_dev);
 	kfree(bdev);
-	dev_set_drvdata(dev, NULL);
 
 	return 0;
 }

drivers/input/misc/sirfsoc-onkey.c

+/*
+ * Power key driver for SiRF PrimaII
+ *
+ * Copyright (c) 2013 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/rtc/sirfsoc_rtciobrg.h>
+#include <linux/of.h>
+
+struct sirfsoc_pwrc_drvdata {
+	u32			pwrc_base;
+	struct input_dev	*input;
+};
+
+#define PWRC_ON_KEY_BIT			(1 << 0)
+
+#define PWRC_INT_STATUS			0xc
+#define PWRC_INT_MASK			0x10
+
+static irqreturn_t sirfsoc_pwrc_isr(int irq, void *dev_id)
+{
+	struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_id;
+	u32 int_status;
+
+	int_status = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base +
+							PWRC_INT_STATUS);
+	sirfsoc_rtc_iobrg_writel(int_status & ~PWRC_ON_KEY_BIT,
+				 pwrcdrv->pwrc_base + PWRC_INT_STATUS);
+
+	/*
+	 * For a typical Linux system, we report KEY_SUSPEND to trigger apm-power.c
+	 * to queue a SUSPEND APM event
+	 */
+	input_event(pwrcdrv->input, EV_PWR, KEY_SUSPEND, 1);
+	input_sync(pwrcdrv->input);
+
+	/*
+	 * Todo: report KEY_POWER event for Android platforms, Android PowerManager
+	 * will handle the suspend and powerdown/hibernation
+	 */
+
+	return IRQ_HANDLED;
+}
+
+static const struct of_device_id sirfsoc_pwrc_of_match[] = {
+	{ .compatible = "sirf,prima2-pwrc" },
+	{},
+}
+MODULE_DEVICE_TABLE(of, sirfsoc_pwrc_of_match);
+
+static int sirfsoc_pwrc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct sirfsoc_pwrc_drvdata *pwrcdrv;
+	int irq;
+	int error;
+
+	pwrcdrv = devm_kzalloc(&pdev->dev, sizeof(struct sirfsoc_pwrc_drvdata),
+			       GFP_KERNEL);
+	if (!pwrcdrv) {
+		dev_info(&pdev->dev, "Not enough memory for the device data\n");
+		return -ENOMEM;
+	}
+
+	/*
+	 * we can't use of_iomap because pwrc is not mapped in memory,
+	 * the so-called base address is only offset in rtciobrg
+	 */
+	error = of_property_read_u32(np, "reg", &pwrcdrv->pwrc_base);
+	if (error) {
+		dev_err(&pdev->dev,
+			"unable to find base address of pwrc node in dtb\n");
+		return error;
+	}
+
+	pwrcdrv->input = devm_input_allocate_device(&pdev->dev);
+	if (!pwrcdrv->input)
+		return -ENOMEM;
+
+	pwrcdrv->input->name = "sirfsoc pwrckey";
+	pwrcdrv->input->phys = "pwrc/input0";
+	pwrcdrv->input->evbit[0] = BIT_MASK(EV_PWR);
+
+	irq = platform_get_irq(pdev, 0);
+	error = devm_request_irq(&pdev->dev, irq,
+				 sirfsoc_pwrc_isr, IRQF_SHARED,
+				 "sirfsoc_pwrc_int", pwrcdrv);
+	if (error) {
+		dev_err(&pdev->dev, "unable to claim irq %d, error: %d\n",
+			irq, error);
+		return error;
+	}
+
+	sirfsoc_rtc_iobrg_writel(
+		sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base + PWRC_INT_MASK) |
+			PWRC_ON_KEY_BIT,
+		pwrcdrv->pwrc_base + PWRC_INT_MASK);
+
+	error = input_register_device(pwrcdrv->input);
+	if (error) {
+		dev_err(&pdev->dev,
+			"unable to register input device, error: %d\n",
+			error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, pwrcdrv);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+}
+
+static int sirfsoc_pwrc_remove(struct platform_device *pdev)
+{
+	device_init_wakeup(&pdev->dev, 0);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pwrc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct sirfsoc_pwrc_drvdata *pwrcdrv = platform_get_drvdata(pdev);
+
+	/*
+	 * Do not mask pwrc interrupt as we want pwrc work as a wakeup source
+	 * if users touch X_ONKEY_B, see arch/arm/mach-prima2/pm.c
+	 */
+	sirfsoc_rtc_iobrg_writel(
+		sirfsoc_rtc_iobrg_readl(
+		pwrcdrv->pwrc_base + PWRC_INT_MASK) | PWRC_ON_KEY_BIT,
+		pwrcdrv->pwrc_base + PWRC_INT_MASK);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, pwrc_resume);
+
+static struct platform_driver sirfsoc_pwrc_driver = {
+	.probe		= sirfsoc_pwrc_probe,
+	.remove		= sirfsoc_pwrc_remove,
+	.driver		= {
+		.name	= "sirfsoc-pwrc",
+		.owner	= THIS_MODULE,
+		.pm	= &sirfsoc_pwrc_pm_ops,
+		.of_match_table = of_match_ptr(sirfsoc_pwrc_of_match),
+	}
+};
+
+module_platform_driver(sirfsoc_pwrc_driver);
+
+MODULE_LICENSE("GPLv2");
+MODULE_AUTHOR("Binghua Duan <Binghua.Duan@csr.com>, Xianglong Du <Xianglong.Du@csr.com>");
+MODULE_DESCRIPTION("CSR Prima2 PWRC Driver");
+MODULE_ALIAS("platform:sirfsoc-pwrc");

drivers/input/misc/sparcspkr.c

@@ -175,7 +175,7 @@ static int sparcspkr_probe(struct device *dev)
 
 static void sparcspkr_shutdown(struct platform_device *dev)
 {
-	struct sparcspkr_state *state = dev_get_drvdata(&dev->dev);
+	struct sparcspkr_state *state = platform_get_drvdata(dev);
 	struct input_dev *input_dev = state->input_dev;
 
 	/* turn off the speaker */
@@ -211,7 +211,7 @@ static int bbc_beep_probe(struct platform_device *op)
 	if (!info->regs)
 		goto out_free;
 
-	dev_set_drvdata(&op->dev, state);
+	platform_set_drvdata(op, state);
 
 	err = sparcspkr_probe(&op->dev);
 	if (err)
@@ -220,7 +220,6 @@ static int bbc_beep_probe(struct platform_device *op)
 	return 0;
 
 out_clear_drvdata:
-	dev_set_drvdata(&op->dev, NULL);
 	of_iounmap(&op->resource[0], info->regs, 6);
 
 out_free:
@@ -231,7 +230,7 @@ static int bbc_beep_probe(struct platform_device *op)
 
 static int bbc_remove(struct platform_device *op)
 {
-	struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
+	struct sparcspkr_state *state = platform_get_drvdata(op);
 	struct input_dev *input_dev = state->input_dev;
 	struct bbc_beep_info *info = &state->u.bbc;
 
@@ -242,7 +241,6 @@ static int bbc_remove(struct platform_device *op)
 
 	of_iounmap(&op->resource[0], info->regs, 6);
 
-	dev_set_drvdata(&op->dev, NULL);
 	kfree(state);
 
 	return 0;
@@ -290,7 +288,7 @@ static int grover_beep_probe(struct platform_device *op)
 	if (!info->enable_reg)
 		goto out_unmap_freq_regs;
 
-	dev_set_drvdata(&op->dev, state);
+	platform_set_drvdata(op, state);
 
 	err = sparcspkr_probe(&op->dev);
 	if (err)
@@ -299,7 +297,6 @@ static int grover_beep_probe(struct platform_device *op)
 	return 0;
 
 out_clear_drvdata:
-	dev_set_drvdata(&op->dev, NULL);
 	of_iounmap(&op->resource[3], info->enable_reg, 1);
 
 out_unmap_freq_regs:
@@ -312,7 +309,7 @@ static int grover_beep_probe(struct platform_device *op)
 
 static int grover_remove(struct platform_device *op)
 {
-	struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
+	struct sparcspkr_state *state = platform_get_drvdata(op);
 	struct grover_beep_info *info = &state->u.grover;
 	struct input_dev *input_dev = state->input_dev;
 
@@ -324,7 +321,6 @@ static int grover_remove(struct platform_device *op)
 	of_iounmap(&op->resource[3], info->enable_reg, 1);
 	of_iounmap(&op->resource[2], info->freq_regs, 2);
 
-	dev_set_drvdata(&op->dev, NULL);
 	kfree(state);
 
 	return 0;

drivers/input/mouse/amimouse.c

@@ -133,7 +133,6 @@ static int __exit amimouse_remove(struct platform_device *pdev)
 {
 	struct input_dev *dev = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	input_unregister_device(dev);
 	return 0;
 }

drivers/input/mouse/bcm5974.c

@@ -88,6 +88,10 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI	0x0259
 #define USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO	0x025a
 #define USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS	0x025b
+/* MacbookAir6,2 (unibody, June 2013) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI	0x0291
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_ISO	0x0292
+#define USB_DEVICE_ID_APPLE_WELLSPRING8_JIS	0x0293
 
 #define BCM5974_DEVICE(prod) {					\
 	.match_flags = (USB_DEVICE_ID_MATCH_DEVICE |		\
@@ -145,6 +149,10 @@ static const struct usb_device_id bcm5974_table[] = {
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_ISO),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING7A_JIS),
+	/* MacbookAir6,2 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING8_JIS),
 	/* Terminating entry */
 	{}
 };
@@ -172,15 +180,18 @@ struct bt_data {
 /* trackpad header types */
 enum tp_type {
 	TYPE1,			/* plain trackpad */
-	TYPE2			/* button integrated in trackpad */
+	TYPE2,			/* button integrated in trackpad */
+	TYPE3			/* additional header fields since June 2013 */
 };
 
 /* trackpad finger data offsets, le16-aligned */
 #define FINGER_TYPE1		(13 * sizeof(__le16))
 #define FINGER_TYPE2		(15 * sizeof(__le16))
+#define FINGER_TYPE3		(19 * sizeof(__le16))
 
 /* trackpad button data offsets */
 #define BUTTON_TYPE2		15
+#define BUTTON_TYPE3		23
 
 /* list of device capability bits */
 #define HAS_INTEGRATED_BUTTON	1
@@ -400,6 +411,19 @@ static const struct bcm5974_config bcm5974_config_table[] = {
 		{ SN_COORD, -150, 6730 },
 		{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
 	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING8_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING8_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING8_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0, sizeof(struct bt_data),
+		0x83, TYPE3, FINGER_TYPE3, FINGER_TYPE3 + SIZEOF_ALL_FINGERS,
+		{ SN_PRESSURE, 0, 300 },
+		{ SN_WIDTH, 0, 2048 },
+		{ SN_COORD, -4620, 5140 },
+		{ SN_COORD, -150, 6600 },
+		{ SN_ORIENT, -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION }
+	},
 	{}
 };
 
@@ -557,6 +581,9 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 		input_report_key(input, BTN_LEFT, ibt);
 	}
 
+	if (c->tp_type == TYPE3)
+		input_report_key(input, BTN_LEFT, dev->tp_data[BUTTON_TYPE3]);
+
 	input_sync(input);
 
 	return 0;
@@ -572,9 +599,14 @@ static int report_tp_state(struct bcm5974 *dev, int size)
 
 static int bcm5974_wellspring_mode(struct bcm5974 *dev, bool on)
 {
-	char *data = kmalloc(8, GFP_KERNEL);
 	int retval = 0, size;
+	char *data;
+
+	/* Type 3 does not require a mode switch */
+	if (dev->cfg.tp_type == TYPE3)
+		return 0;
 
+	data = kmalloc(8, GFP_KERNEL);
 	if (!data) {
 		dev_err(&dev->intf->dev, "out of memory\n");
 		retval = -ENOMEM;

drivers/input/mouse/gpio_mouse.c

@@ -138,7 +138,6 @@ static int gpio_mouse_probe(struct platform_device *pdev)
 
  out_free_polldev:
 	input_free_polled_device(input_poll);
-	platform_set_drvdata(pdev, NULL);
 
  out_free_gpios:
 	while (--i >= 0) {
@@ -165,8 +164,6 @@ static int gpio_mouse_remove(struct platform_device *pdev)
 			gpio_free(pin);
 	}
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/mouse/navpoint.c

@@ -287,7 +287,7 @@ static int navpoint_probe(struct platform_device *pdev)
 	return 0;
 
 err_free_irq:
-	free_irq(ssp->irq, &pdev->dev);
+	free_irq(ssp->irq, navpoint);
 err_free_mem:
 	input_free_device(input);
 	kfree(navpoint);

drivers/input/serio/Kconfig

@@ -256,4 +256,14 @@ config SERIO_APBPS2
 	  To compile this driver as a module, choose M here: the module will
 	  be called apbps2.
 
+config SERIO_OLPC_APSP
+	tristate "OLPC AP-SP input support"
+	depends on OF
+	help
+	  Say Y here if you want support for the keyboard and touchpad included
+	  in the OLPC XO-1.75 and XO-4 laptops.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called olpc_apsp.
+
 endif

drivers/input/serio/Makefile

@@ -27,3 +27,4 @@ obj-$(CONFIG_SERIO_XILINX_XPS_PS2)	+= xilinx_ps2.o
 obj-$(CONFIG_SERIO_ALTERA_PS2)	+= altera_ps2.o
 obj-$(CONFIG_SERIO_ARC_PS2)	+= arc_ps2.o
 obj-$(CONFIG_SERIO_APBPS2)	+= apbps2.o
+obj-$(CONFIG_SERIO_OLPC_APSP)	+= olpc_apsp.o

drivers/input/serio/altera_ps2.c

@@ -163,7 +163,6 @@ static int altera_ps2_remove(struct platform_device *pdev)
 {
 	struct ps2if *ps2if = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
 	serio_unregister_port(ps2if->io);
 	free_irq(ps2if->irq, ps2if);
 	iounmap(ps2if->base);

drivers/input/serio/at32psif.c

@@ -314,8 +314,6 @@ static int __exit psif_remove(struct platform_device *pdev)
 	clk_put(psif->pclk);
 	kfree(psif);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/serio/olpc_apsp.c

+/*
+ * OLPC serio driver for multiplexed input from Marvell MMP security processor
+ *
+ * Copyright (C) 2011-2013 One Laptop Per Child
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+/*
+ * The OLPC XO-1.75 and XO-4 laptops do not have a hardware PS/2 controller.
+ * Instead, the OLPC firmware runs a bit-banging PS/2 implementation on an
+ * otherwise-unused slow processor which is included in the Marvell MMP2/MMP3
+ * SoC, known as the "Security Processor" (SP) or "Wireless Trusted Module"
+ * (WTM). This firmware then reports its results via the WTM registers,
+ * which we read from the Application Processor (AP, i.e. main CPU) in this
+ * driver.
+ *
+ * On the hardware side we have a PS/2 mouse and an AT keyboard, the data
+ * is multiplexed through this system. We create a serio port for each one,
+ * and demultiplex the data accordingly.
+ */
+
+/* WTM register offsets */
+#define SECURE_PROCESSOR_COMMAND	0x40
+#define COMMAND_RETURN_STATUS		0x80
+#define COMMAND_FIFO_STATUS		0xc4
+#define PJ_RST_INTERRUPT		0xc8
+#define PJ_INTERRUPT_MASK		0xcc
+
+/*
+ * The upper byte of SECURE_PROCESSOR_COMMAND and COMMAND_RETURN_STATUS is
+ * used to identify which port (device) is being talked to. The lower byte
+ * is the data being sent/received.
+ */
+#define PORT_MASK	0xff00
+#define DATA_MASK	0x00ff
+#define PORT_SHIFT	8
+#define KEYBOARD_PORT	0
+#define TOUCHPAD_PORT	1
+
+/* COMMAND_FIFO_STATUS */
+#define CMD_CNTR_MASK		0x7 /* Number of pending/unprocessed commands */
+#define MAX_PENDING_CMDS	4   /* from device specs */
+
+/* PJ_RST_INTERRUPT */
+#define SP_COMMAND_COMPLETE_RESET	0x1
+
+/* PJ_INTERRUPT_MASK */
+#define INT_0	(1 << 0)
+
+/* COMMAND_FIFO_STATUS */
+#define CMD_STS_MASK	0x100
+
+struct olpc_apsp {
+	struct device *dev;
+	struct serio *kbio;
+	struct serio *padio;
+	void __iomem *base;
+	int open_count;
+	int irq;
+};
+
+static int olpc_apsp_write(struct serio *port, unsigned char val)
+{
+	struct olpc_apsp *priv = port->port_data;
+	unsigned int i;
+	u32 which = 0;
+
+	if (port == priv->padio)
+		which = TOUCHPAD_PORT << PORT_SHIFT;
+	else
+		which = KEYBOARD_PORT << PORT_SHIFT;
+
+	dev_dbg(priv->dev, "olpc_apsp_write which=%x val=%x\n", which, val);
+	for (i = 0; i < 50; i++) {
+		u32 sts = readl(priv->base + COMMAND_FIFO_STATUS);
+		if ((sts & CMD_CNTR_MASK) < MAX_PENDING_CMDS) {
+			writel(which | val,
+			       priv->base + SECURE_PROCESSOR_COMMAND);
+			return 0;
+		}
+		/* SP busy. This has not been seen in practice. */
+		mdelay(1);
+	}
+
+	dev_dbg(priv->dev, "olpc_apsp_write timeout, status=%x\n",
+		readl(priv->base + COMMAND_FIFO_STATUS));
+
+	return -ETIMEDOUT;
+}
+
+static irqreturn_t olpc_apsp_rx(int irq, void *dev_id)
+{
+	struct olpc_apsp *priv = dev_id;
+	unsigned int w, tmp;
+	struct serio *serio;
+
+	/*
+	 * Write 1 to PJ_RST_INTERRUPT to acknowledge and clear the interrupt
+	 * Write 0xff00 to SECURE_PROCESSOR_COMMAND.
+	 */
+	tmp = readl(priv->base + PJ_RST_INTERRUPT);
+	if (!(tmp & SP_COMMAND_COMPLETE_RESET)) {
+		dev_warn(priv->dev, "spurious interrupt?\n");
+		return IRQ_NONE;
+	}
+
+	w = readl(priv->base + COMMAND_RETURN_STATUS);
+	dev_dbg(priv->dev, "olpc_apsp_rx %x\n", w);
+
+	if (w >> PORT_SHIFT == KEYBOARD_PORT)
+		serio = priv->kbio;
+	else
+		serio = priv->padio;
+
+	serio_interrupt(serio, w & DATA_MASK, 0);
+
+	/* Ack and clear interrupt */
+	writel(tmp | SP_COMMAND_COMPLETE_RESET, priv->base + PJ_RST_INTERRUPT);
+	writel(PORT_MASK, priv->base + SECURE_PROCESSOR_COMMAND);
+
+	pm_wakeup_event(priv->dev, 1000);
+	return IRQ_HANDLED;
+}
+
+static int olpc_apsp_open(struct serio *port)
+{
+	struct olpc_apsp *priv = port->port_data;
+	unsigned int tmp;
+
+	if (priv->open_count++ == 0) {
+		/* Enable interrupt 0 by clearing its bit */
+		tmp = readl(priv->base + PJ_INTERRUPT_MASK);
+		writel(tmp & ~INT_0, priv->base + PJ_INTERRUPT_MASK);
+	}
+
+	return 0;
+}
+
+static void olpc_apsp_close(struct serio *port)
+{
+	struct olpc_apsp *priv = port->port_data;
+	unsigned int tmp;
+
+	if (--priv->open_count == 0) {
+		/* Disable interrupt 0 */
+		tmp = readl(priv->base + PJ_INTERRUPT_MASK);
+		writel(tmp | INT_0, priv->base + PJ_INTERRUPT_MASK);
+	}
+}
+
+static int olpc_apsp_probe(struct platform_device *pdev)
+{
+	struct serio *kb_serio, *pad_serio;
+	struct olpc_apsp *priv;
+	struct resource *res;
+	struct device_node *np;
+	unsigned long l;
+	int error;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(struct olpc_apsp), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	np = pdev->dev.of_node;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOENT;
+
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base)) {
+		dev_err(&pdev->dev, "Failed to map WTM registers\n");
+		return PTR_ERR(priv->base);
+	}
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0)
+		return priv->irq;
+
+	l = readl(priv->base + COMMAND_FIFO_STATUS);
+	if (!(l & CMD_STS_MASK)) {
+		dev_err(&pdev->dev, "SP cannot accept commands.\n");
+		return -EIO;
+	}
+
+	/* KEYBOARD */
+	kb_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!kb_serio)
+		return -ENOMEM;
+	kb_serio->id.type	= SERIO_8042_XL;
+	kb_serio->write		= olpc_apsp_write;
+	kb_serio->open		= olpc_apsp_open;
+	kb_serio->close		= olpc_apsp_close;
+	kb_serio->port_data	= priv;
+	kb_serio->dev.parent	= &pdev->dev;
+	strlcpy(kb_serio->name, "sp keyboard", sizeof(kb_serio->name));
+	strlcpy(kb_serio->phys, "sp/serio0", sizeof(kb_serio->phys));
+	priv->kbio		= kb_serio;
+	serio_register_port(kb_serio);
+
+	/* TOUCHPAD */
+	pad_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
+	if (!pad_serio) {
+		error = -ENOMEM;
+		goto err_pad;
+	}
+	pad_serio->id.type	= SERIO_8042;
+	pad_serio->write	= olpc_apsp_write;
+	pad_serio->open		= olpc_apsp_open;
+	pad_serio->close	= olpc_apsp_close;
+	pad_serio->port_data	= priv;
+	pad_serio->dev.parent	= &pdev->dev;
+	strlcpy(pad_serio->name, "sp touchpad", sizeof(pad_serio->name));
+	strlcpy(pad_serio->phys, "sp/serio1", sizeof(pad_serio->phys));
+	priv->padio		= pad_serio;
+	serio_register_port(pad_serio);
+
+	error = request_irq(priv->irq, olpc_apsp_rx, 0, "olpc-apsp", priv);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to request IRQ\n");
+		goto err_irq;
+	}
+
+	priv->dev = &pdev->dev;
+	device_init_wakeup(priv->dev, 1);
+	platform_set_drvdata(pdev, priv);
+
+	dev_dbg(&pdev->dev, "probed successfully.\n");
+	return 0;
+
+err_irq:
+	serio_unregister_port(pad_serio);
+err_pad:
+	serio_unregister_port(kb_serio);
+	return error;
+}
+
+static int olpc_apsp_remove(struct platform_device *pdev)
+{
+	struct olpc_apsp *priv = platform_get_drvdata(pdev);
+
+	free_irq(priv->irq, priv);
+
+	serio_unregister_port(priv->kbio);
+	serio_unregister_port(priv->padio);
+
+	return 0;
+}
+
+static struct of_device_id olpc_apsp_dt_ids[] = {
+	{ .compatible = "olpc,ap-sp", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, olpc_apsp_dt_ids);
+
+static struct platform_driver olpc_apsp_driver = {
+	.probe		= olpc_apsp_probe,
+	.remove		= olpc_apsp_remove,
+	.driver		= {
+		.name	= "olpc-apsp",
+		.owner	= THIS_MODULE,
+		.of_match_table = olpc_apsp_dt_ids,
+	},
+};
+
+MODULE_DESCRIPTION("OLPC AP-SP serio driver");
+MODULE_LICENSE("GPL");
+module_platform_driver(olpc_apsp_driver);

drivers/input/serio/q40kbd.c

@@ -181,7 +181,6 @@ static int q40kbd_remove(struct platform_device *pdev)
 	free_irq(Q40_IRQ_KEYBOARD, q40kbd);
 	kfree(q40kbd);
 
-	platform_set_drvdata(pdev, NULL);
 	return 0;
 }
 

drivers/input/serio/xilinx_ps2.c

@@ -349,8 +349,6 @@ static int xps2_of_remove(struct platform_device *of_dev)
 
 	kfree(drvdata);
 
-	platform_set_drvdata(of_dev, NULL);
-
 	return 0;
 }
 

drivers/input/touchscreen/88pm860x-ts.c

@@ -237,7 +237,7 @@ static int pm860x_touch_probe(struct platform_device *pdev)
 	touch = kzalloc(sizeof(struct pm860x_touch), GFP_KERNEL);
 	if (touch == NULL)
 		return -ENOMEM;
-	dev_set_drvdata(&pdev->dev, touch);
+	platform_set_drvdata(pdev, touch);
 
 	touch->idev = input_allocate_device();
 	if (touch->idev == NULL) {
@@ -299,7 +299,6 @@ static int pm860x_touch_remove(struct platform_device *pdev)
 
 	input_unregister_device(touch->idev);
 	free_irq(touch->irq, touch);
-	platform_set_drvdata(pdev, NULL);
 	kfree(touch);
 	return 0;
 }

drivers/input/touchscreen/Kconfig

@@ -167,6 +167,36 @@ config TOUCHSCREEN_CYTTSP_SPI
 	  To compile this driver as a module, choose M here: the
 	  module will be called cyttsp_spi.
 
+config TOUCHSCREEN_CYTTSP4_CORE
+	tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
+	help
+	  Core driver for Cypress TrueTouch(tm) Standard Product
+	  Generation4 touchscreen controllers.
+
+	  Say Y here if you have a Cypress Gen4 touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here.
+
+config TOUCHSCREEN_CYTTSP4_I2C
+	tristate "support I2C bus connection"
+	depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
+	help
+	  Say Y here if the touchscreen is connected via I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp4_i2c.
+
+config TOUCHSCREEN_CYTTSP4_SPI
+	tristate "support SPI bus connection"
+	depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
+	help
+	  Say Y here if the touchscreen is connected via SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp4_spi.
+
 config TOUCHSCREEN_DA9034
 	tristate "Touchscreen support for Dialog Semiconductor DA9034"
 	depends on PMIC_DA903X
@@ -879,6 +909,7 @@ config TOUCHSCREEN_STMPE
 config TOUCHSCREEN_TPS6507X
 	tristate "TPS6507x based touchscreens"
 	depends on I2C
+	select INPUT_POLLDEV
 	help
 	  Say Y here if you have a TPS6507x based touchscreen
 	  controller.

drivers/input/touchscreen/Makefile

@@ -18,8 +18,11 @@ obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
 obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
-obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o cyttsp_i2c_common.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI)	+= cyttsp_spi.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE)	+= cyttsp4_core.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C)	+= cyttsp4_i2c.o cyttsp_i2c_common.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI)	+= cyttsp4_spi.o
 obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
 obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o
 obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o

drivers/input/touchscreen/atmel-wm97xx.c

@@ -372,7 +372,6 @@ static int __init atmel_wm97xx_probe(struct platform_device *pdev)
 err_irq:
 	free_irq(atmel_wm97xx->ac97c_irq, atmel_wm97xx);
 err:
-	platform_set_drvdata(pdev, NULL);
 	kfree(atmel_wm97xx);
 	return ret;
 }
@@ -386,7 +385,6 @@ static int __exit atmel_wm97xx_remove(struct platform_device *pdev)
 	free_irq(atmel_wm97xx->ac97c_irq, atmel_wm97xx);
 	del_timer_sync(&atmel_wm97xx->pen_timer);
 	wm97xx_unregister_mach_ops(wm);
-	platform_set_drvdata(pdev, NULL);
 	kfree(atmel_wm97xx);
 
 	return 0;

drivers/input/touchscreen/atmel_tsadcc.c

@@ -183,10 +183,13 @@ static int atmel_tsadcc_probe(struct platform_device *pdev)
 	struct input_dev	*input_dev;
 	struct resource		*res;
 	struct at91_tsadcc_data *pdata = pdev->dev.platform_data;
-	int		err = 0;
+	int		err;
 	unsigned int	prsc;
 	unsigned int	reg;
 
+	if (!pdata)
+		return -EINVAL;
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "no mmio resource defined.\n");
@@ -265,9 +268,6 @@ static int atmel_tsadcc_probe(struct platform_device *pdev)
 	prsc = clk_get_rate(ts_dev->clk);
 	dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
 
-	if (!pdata)
-		goto err_fail;
-
 	if (!pdata->adc_clock)
 		pdata->adc_clock = ADC_DEFAULT_CLOCK;
 
@@ -325,7 +325,7 @@ static int atmel_tsadcc_probe(struct platform_device *pdev)
 
 static int atmel_tsadcc_remove(struct platform_device *pdev)
 {
-	struct atmel_tsadcc *ts_dev = dev_get_drvdata(&pdev->dev);
+	struct atmel_tsadcc *ts_dev = platform_get_drvdata(pdev);
 	struct resource *res;
 
 	free_irq(ts_dev->irq, ts_dev);

drivers/input/touchscreen/cyttsp4_i2c.c

+/*
+ * cyttsp_i2c.c
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress  Txx4xx parts.
+ * Supported parts include:
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2013 Cypress Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
+ *
+ */
+
+#include "cyttsp4_core.h"
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+
+#define CYTTSP4_I2C_DATA_SIZE	(3 * 256)
+
+static const struct cyttsp4_bus_ops cyttsp4_i2c_bus_ops = {
+	.bustype	= BUS_I2C,
+	.write		= cyttsp_i2c_write_block_data,
+	.read           = cyttsp_i2c_read_block_data,
+};
+
+static int cyttsp4_i2c_probe(struct i2c_client *client,
+				      const struct i2c_device_id *id)
+{
+	struct cyttsp4 *ts;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "I2C functionality not Supported\n");
+		return -EIO;
+	}
+
+	ts = cyttsp4_probe(&cyttsp4_i2c_bus_ops, &client->dev, client->irq,
+			  CYTTSP4_I2C_DATA_SIZE);
+
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	return 0;
+}
+
+static int cyttsp4_i2c_remove(struct i2c_client *client)
+{
+	struct cyttsp4 *ts = i2c_get_clientdata(client);
+
+	cyttsp4_remove(ts);
+
+	return 0;
+}
+
+static const struct i2c_device_id cyttsp4_i2c_id[] = {
+	{ CYTTSP4_I2C_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, cyttsp4_i2c_id);
+
+static struct i2c_driver cyttsp4_i2c_driver = {
+	.driver = {
+		.name	= CYTTSP4_I2C_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &cyttsp4_pm_ops,
+	},
+	.probe		= cyttsp4_i2c_probe,
+	.remove		= cyttsp4_i2c_remove,
+	.id_table	= cyttsp4_i2c_id,
+};
+
+module_i2c_driver(cyttsp4_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver");
+MODULE_AUTHOR("Cypress");
+MODULE_ALIAS("i2c:cyttsp4");

drivers/input/touchscreen/cyttsp4_spi.c

+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver.
+ * For use with Cypress Txx4xx parts.
+ * Supported parts include:
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2013 Cypress Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
+ *
+ */
+
+#include "cyttsp4_core.h"
+
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+
+#define CY_SPI_WR_OP		0x00 /* r/~w */
+#define CY_SPI_RD_OP		0x01
+#define CY_SPI_BITS_PER_WORD	8
+#define CY_SPI_A8_BIT		0x02
+#define CY_SPI_WR_HEADER_BYTES	2
+#define CY_SPI_RD_HEADER_BYTES	1
+#define CY_SPI_CMD_BYTES	2
+#define CY_SPI_SYNC_BYTE	0
+#define CY_SPI_SYNC_ACK		0x62 /* from TRM *A protocol */
+#define CY_SPI_DATA_SIZE	(2 * 256)
+
+#define CY_SPI_DATA_BUF_SIZE	(CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
+
+static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
+			   u8 op, u8 reg, u8 *buf, int length)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct spi_message msg;
+	struct spi_transfer xfer[2];
+	u8 *wr_buf = &xfer_buf[0];
+	u8 rd_buf[CY_SPI_CMD_BYTES];
+	int retval;
+	int i;
+
+	if (length > CY_SPI_DATA_SIZE) {
+		dev_err(dev, "%s: length %d is too big.\n",
+			__func__, length);
+		return -EINVAL;
+	}
+
+	memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE);
+	memset(rd_buf, 0, CY_SPI_CMD_BYTES);
+
+	if (reg > 255)
+		wr_buf[0] = op + CY_SPI_A8_BIT;
+	else
+		wr_buf[0] = op;
+	if (op == CY_SPI_WR_OP)
+		wr_buf[1] = reg % 256;
+	if (op == CY_SPI_WR_OP && length > 0)
+		memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
+
+	memset(xfer, 0, sizeof(xfer));
+	spi_message_init(&msg);
+
+	/*
+	  We set both TX and RX buffers because Cypress TTSP
+	  requires full duplex operation.
+	*/
+	xfer[0].tx_buf = wr_buf;
+	xfer[0].rx_buf = rd_buf;
+	switch (op) {
+	case CY_SPI_WR_OP:
+		xfer[0].len = length + CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+		break;
+
+	case CY_SPI_RD_OP:
+		xfer[0].len = CY_SPI_RD_HEADER_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+
+		xfer[1].rx_buf = buf;
+		xfer[1].len = length;
+		spi_message_add_tail(&xfer[1], &msg);
+		break;
+
+	default:
+		dev_err(dev, "%s: bad operation code=%d\n", __func__, op);
+		return -EINVAL;
+	}
+
+	retval = spi_sync(spi, &msg);
+	if (retval < 0) {
+		dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
+			__func__, retval, xfer[1].len, op);
+
+		/*
+		 * do not return here since was a bad ACK sequence
+		 * let the following ACK check handle any errors and
+		 * allow silent retries
+		 */
+	}
+
+	if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK) {
+		dev_dbg(dev, "%s: operation %d failed\n", __func__, op);
+
+		for (i = 0; i < CY_SPI_CMD_BYTES; i++)
+			dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n",
+				__func__, i, rd_buf[i]);
+		for (i = 0; i < length; i++)
+			dev_dbg(dev, "%s: test buf[%d]:0x%02x\n",
+				__func__, i, buf[i]);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
+				      u8 addr, u8 length, void *data)
+{
+	int rc;
+
+	rc = cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, NULL, 0);
+	if (rc)
+		return rc;
+	else
+		return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data,
+				length);
+}
+
+static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf,
+				       u8 addr, u8 length, const void *data)
+{
+	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data,
+			length);
+}
+
+static const struct cyttsp4_bus_ops cyttsp_spi_bus_ops = {
+	.bustype	= BUS_SPI,
+	.write		= cyttsp_spi_write_block_data,
+	.read		= cyttsp_spi_read_block_data,
+};
+
+static int cyttsp4_spi_probe(struct spi_device *spi)
+{
+	struct cyttsp4 *ts;
+	int error;
+
+	/* Set up SPI*/
+	spi->bits_per_word = CY_SPI_BITS_PER_WORD;
+	spi->mode = SPI_MODE_0;
+	error = spi_setup(spi);
+	if (error < 0) {
+		dev_err(&spi->dev, "%s: SPI setup error %d\n",
+			__func__, error);
+		return error;
+	}
+
+	ts = cyttsp4_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq,
+			  CY_SPI_DATA_BUF_SIZE);
+
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	return 0;
+}
+
+static int cyttsp4_spi_remove(struct spi_device *spi)
+{
+	struct cyttsp4 *ts = spi_get_drvdata(spi);
+	cyttsp4_remove(ts);
+
+	return 0;
+}
+
+static struct spi_driver cyttsp4_spi_driver = {
+	.driver = {
+		.name	= CYTTSP4_SPI_NAME,
+		.owner	= THIS_MODULE,
+		.pm	= &cyttsp4_pm_ops,
+	},
+	.probe  = cyttsp4_spi_probe,
+	.remove = cyttsp4_spi_remove,
+};
+
+module_spi_driver(cyttsp4_spi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver");
+MODULE_AUTHOR("Cypress");
+MODULE_ALIAS("spi:cyttsp4");

drivers/input/touchscreen/cyttsp_core.c

@@ -84,7 +84,8 @@ static int ttsp_read_block_data(struct cyttsp *ts, u8 command,
 	int tries;
 
 	for (tries = 0; tries < CY_NUM_RETRY; tries++) {
-		error = ts->bus_ops->read(ts, command, length, buf);
+		error = ts->bus_ops->read(ts->dev, ts->xfer_buf, command,
+				length, buf);
 		if (!error)
 			return 0;
 
@@ -101,7 +102,8 @@ static int ttsp_write_block_data(struct cyttsp *ts, u8 command,
 	int tries;
 
 	for (tries = 0; tries < CY_NUM_RETRY; tries++) {
-		error = ts->bus_ops->write(ts, command, length, buf);
+		error = ts->bus_ops->write(ts->dev, ts->xfer_buf, command,
+				length, buf);
 		if (!error)
 			return 0;
 

drivers/input/touchscreen/cyttsp_core.h

@@ -112,9 +112,10 @@ struct cyttsp;
 
 struct cyttsp_bus_ops {
 	u16 bustype;
-	int (*write)(struct cyttsp *ts,
-		     u8 addr, u8 length, const void *values);
-	int (*read)(struct cyttsp *ts, u8 addr, u8 length, void *values);
+	int (*write)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
+			const void *values);
+	int (*read)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
+			void *values);
 };
 
 enum cyttsp_state {
@@ -144,6 +145,10 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
 			    struct device *dev, int irq, size_t xfer_buf_size);
 void cyttsp_remove(struct cyttsp *ts);
 
+int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
+		u8 length, const void *values);
+int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
+		u8 length, void *values);
 extern const struct dev_pm_ops cyttsp_pm_ops;
 
 #endif /* __CYTTSP_CORE_H__ */

drivers/input/touchscreen/cyttsp_i2c.c

 /*
- * Source for:
+ * cyttsp_i2c.c
  * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
  * For use with Cypress Txx3xx parts.
  * Supported parts include:
@@ -19,11 +19,7 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- *
- * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
  *
  */
 
@@ -34,47 +30,6 @@
 
 #define CY_I2C_DATA_SIZE	128
 
-static int cyttsp_i2c_read_block_data(struct cyttsp *ts,
-				      u8 addr, u8 length, void *values)
-{
-	struct i2c_client *client = to_i2c_client(ts->dev);
-	struct i2c_msg msgs[] = {
-		{
-			.addr = client->addr,
-			.flags = 0,
-			.len = 1,
-			.buf = &addr,
-		},
-		{
-			.addr = client->addr,
-			.flags = I2C_M_RD,
-			.len = length,
-			.buf = values,
-		},
-	};
-	int retval;
-
-	retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
-	if (retval < 0)
-		return retval;
-
-	return retval != ARRAY_SIZE(msgs) ? -EIO : 0;
-}
-
-static int cyttsp_i2c_write_block_data(struct cyttsp *ts,
-				       u8 addr, u8 length, const void *values)
-{
-	struct i2c_client *client = to_i2c_client(ts->dev);
-	int retval;
-
-	ts->xfer_buf[0] = addr;
-	memcpy(&ts->xfer_buf[1], values, length);
-
-	retval = i2c_master_send(client, ts->xfer_buf, length + 1);
-
-	return retval < 0 ? retval : 0;
-}
-
 static const struct cyttsp_bus_ops cyttsp_i2c_bus_ops = {
 	.bustype	= BUS_I2C,
 	.write		= cyttsp_i2c_write_block_data,
@@ -98,7 +53,6 @@ static int cyttsp_i2c_probe(struct i2c_client *client,
 		return PTR_ERR(ts);
 
 	i2c_set_clientdata(client, ts);
-
 	return 0;
 }
 

drivers/input/touchscreen/cyttsp_i2c_common.c

+/*
+ * cyttsp_i2c_common.c
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress Txx3xx and Txx4xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf,
+				      u8 addr, u8 length, void *values)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = 1,
+			.buf = &addr,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = length,
+			.buf = values,
+		},
+	};
+	int retval;
+
+	retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (retval < 0)
+		return retval;
+
+	return retval != ARRAY_SIZE(msgs) ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(cyttsp_i2c_read_block_data);
+
+int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf,
+				       u8 addr, u8 length, const void *values)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int retval;
+
+	xfer_buf[0] = addr;
+	memcpy(&xfer_buf[1], values, length);
+
+	retval = i2c_master_send(client, xfer_buf, length + 1);
+
+	return retval < 0 ? retval : 0;
+}
+EXPORT_SYMBOL_GPL(cyttsp_i2c_write_block_data);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cypress");

drivers/input/touchscreen/cyttsp_spi.c

@@ -8,6 +8,7 @@
  *
  * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
  * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2013 Cypress Semiconductor
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -19,11 +20,7 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
- *
- * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
  *
  */
 
@@ -43,19 +40,19 @@
 #define CY_SPI_DATA_BUF_SIZE	(CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
 #define CY_SPI_BITS_PER_WORD	8
 
-static int cyttsp_spi_xfer(struct cyttsp *ts,
+static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
 			   u8 op, u8 reg, u8 *buf, int length)
 {
-	struct spi_device *spi = to_spi_device(ts->dev);
+	struct spi_device *spi = to_spi_device(dev);
 	struct spi_message msg;
 	struct spi_transfer xfer[2];
-	u8 *wr_buf = &ts->xfer_buf[0];
-	u8 *rd_buf = &ts->xfer_buf[CY_SPI_DATA_BUF_SIZE];
+	u8 *wr_buf = &xfer_buf[0];
+	u8 *rd_buf = &xfer_buf[CY_SPI_DATA_BUF_SIZE];
 	int retval;
 	int i;
 
 	if (length > CY_SPI_DATA_SIZE) {
-		dev_err(ts->dev, "%s: length %d is too big.\n",
+		dev_err(dev, "%s: length %d is too big.\n",
 			__func__, length);
 		return -EINVAL;
 	}
@@ -95,13 +92,13 @@ static int cyttsp_spi_xfer(struct cyttsp *ts,
 		break;
 
 	default:
-		dev_err(ts->dev, "%s: bad operation code=%d\n", __func__, op);
+		dev_err(dev, "%s: bad operation code=%d\n", __func__, op);
 		return -EINVAL;
 	}
 
 	retval = spi_sync(spi, &msg);
 	if (retval < 0) {
-		dev_dbg(ts->dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
+		dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
 			__func__, retval, xfer[1].len, op);
 
 		/*
@@ -113,14 +110,13 @@ static int cyttsp_spi_xfer(struct cyttsp *ts,
 
 	if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK1 ||
 	    rd_buf[CY_SPI_SYNC_BYTE + 1] != CY_SPI_SYNC_ACK2) {
-
-		dev_dbg(ts->dev, "%s: operation %d failed\n", __func__, op);
+		dev_dbg(dev, "%s: operation %d failed\n", __func__, op);
 
 		for (i = 0; i < CY_SPI_CMD_BYTES; i++)
-			dev_dbg(ts->dev, "%s: test rd_buf[%d]:0x%02x\n",
+			dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n",
 				__func__, i, rd_buf[i]);
 		for (i = 0; i < length; i++)
-			dev_dbg(ts->dev, "%s: test buf[%d]:0x%02x\n",
+			dev_dbg(dev, "%s: test buf[%d]:0x%02x\n",
 				__func__, i, buf[i]);
 
 		return -EIO;
@@ -129,16 +125,18 @@ static int cyttsp_spi_xfer(struct cyttsp *ts,
 	return 0;
 }
 
-static int cyttsp_spi_read_block_data(struct cyttsp *ts,
+static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
 				      u8 addr, u8 length, void *data)
 {
-	return cyttsp_spi_xfer(ts, CY_SPI_RD_OP, addr, data, length);
+	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data,
+			length);
 }
 
-static int cyttsp_spi_write_block_data(struct cyttsp *ts,
+static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf,
 				       u8 addr, u8 length, const void *data)
 {
-	return cyttsp_spi_xfer(ts, CY_SPI_WR_OP, addr, (void *)data, length);
+	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data,
+			length);
 }
 
 static const struct cyttsp_bus_ops cyttsp_spi_bus_ops = {

drivers/input/touchscreen/da9052_tsi.c

@@ -329,8 +329,6 @@ static int  da9052_ts_remove(struct platform_device *pdev)
 	input_unregister_device(tsi->dev);
 	kfree(tsi);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/touchscreen/egalax_ts.c

@@ -170,20 +170,18 @@ static int egalax_ts_probe(struct i2c_client *client,
 {
 	struct egalax_ts *ts;
 	struct input_dev *input_dev;
-	int ret;
 	int error;
 
-	ts = kzalloc(sizeof(struct egalax_ts), GFP_KERNEL);
+	ts = devm_kzalloc(&client->dev, sizeof(struct egalax_ts), GFP_KERNEL);
 	if (!ts) {
 		dev_err(&client->dev, "Failed to allocate memory\n");
 		return -ENOMEM;
 	}
 
-	input_dev = input_allocate_device();
+	input_dev = devm_input_allocate_device(&client->dev);
 	if (!input_dev) {
 		dev_err(&client->dev, "Failed to allocate memory\n");
-		error = -ENOMEM;
-		goto err_free_ts;
+		return -ENOMEM;
 	}
 
 	ts->client = client;
@@ -193,19 +191,17 @@ static int egalax_ts_probe(struct i2c_client *client,
 	error = egalax_wake_up_device(client);
 	if (error) {
 		dev_err(&client->dev, "Failed to wake up the controller\n");
-		goto err_free_dev;
+		return error;
 	}
 
-	ret = egalax_firmware_version(client);
-	if (ret < 0) {
+	error = egalax_firmware_version(client);
+	if (error < 0) {
 		dev_err(&client->dev, "Failed to read firmware version\n");
-		error = -EIO;
-		goto err_free_dev;
+		return error;
 	}
 
 	input_dev->name = "EETI eGalax Touch Screen";
 	input_dev->id.bustype = BUS_I2C;
-	input_dev->dev.parent = &client->dev;
 
 	__set_bit(EV_ABS, input_dev->evbit);
 	__set_bit(EV_KEY, input_dev->evbit);
@@ -221,40 +217,20 @@ static int egalax_ts_probe(struct i2c_client *client,
 
 	input_set_drvdata(input_dev, ts);
 
-	error = request_threaded_irq(client->irq, NULL, egalax_ts_interrupt,
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					  egalax_ts_interrupt,
 					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
 					  "egalax_ts", ts);
 	if (error < 0) {
 		dev_err(&client->dev, "Failed to register interrupt\n");
-		goto err_free_dev;
+		return error;
 	}
 
 	error = input_register_device(ts->input_dev);
 	if (error)
-		goto err_free_irq;
-
-	i2c_set_clientdata(client, ts);
-	return 0;
-
-err_free_irq:
-	free_irq(client->irq, ts);
-err_free_dev:
-	input_free_device(input_dev);
-err_free_ts:
-	kfree(ts);
-
 		return error;
-}
-
-static int egalax_ts_remove(struct i2c_client *client)
-{
-	struct egalax_ts *ts = i2c_get_clientdata(client);
-
-	free_irq(client->irq, ts);
-
-	input_unregister_device(ts->input_dev);
-	kfree(ts);
 
+	i2c_set_clientdata(client, ts);
 	return 0;
 }
 
@@ -301,7 +277,6 @@ static struct i2c_driver egalax_ts_driver = {
 	},
 	.id_table	= egalax_ts_id,
 	.probe		= egalax_ts_probe,
-	.remove		= egalax_ts_remove,
 };
 
 module_i2c_driver(egalax_ts_driver);

drivers/input/touchscreen/intel-mid-touch.c

@@ -651,8 +651,6 @@ static int mrstouch_remove(struct platform_device *pdev)
 	input_unregister_device(tsdev->input);
 	kfree(tsdev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/touchscreen/jornada720_ts.c

@@ -145,7 +145,6 @@ static int jornada720_ts_probe(struct platform_device *pdev)
  fail2:
 	free_irq(IRQ_GPIO9, pdev);
  fail1:
-	platform_set_drvdata(pdev, NULL);
 	input_free_device(input_dev);
 	kfree(jornada_ts);
 	return error;
@@ -156,7 +155,6 @@ static int jornada720_ts_remove(struct platform_device *pdev)
 	struct jornada_ts *jornada_ts = platform_get_drvdata(pdev);
 
 	free_irq(IRQ_GPIO9, pdev);
-	platform_set_drvdata(pdev, NULL);
 	input_unregister_device(jornada_ts->dev);
 	kfree(jornada_ts);
 

drivers/input/touchscreen/mc13783_ts.c

@@ -233,8 +233,6 @@ static int mc13783_ts_remove(struct platform_device *pdev)
 {
 	struct mc13783_ts_priv *priv = platform_get_drvdata(pdev);
 
-	platform_set_drvdata(pdev, NULL);
-
 	destroy_workqueue(priv->workq);
 	input_unregister_device(priv->idev);
 	kfree(priv);

drivers/input/touchscreen/ti_am335x_tsc.c

@@ -336,7 +336,6 @@ static int titsc_remove(struct platform_device *pdev)
 
 	input_unregister_device(ts_dev->input);
 
-	platform_set_drvdata(pdev, NULL);
 	kfree(ts_dev);
 	return 0;
 }

drivers/input/touchscreen/tnetv107x-ts.c

@@ -351,7 +351,6 @@ static int tsc_probe(struct platform_device *pdev)
 error_map:
 	release_mem_region(ts->res->start, resource_size(ts->res));
 error_res:
-	platform_set_drvdata(pdev, NULL);
 	kfree(ts);
 
 	return error;
@@ -366,7 +365,6 @@ static int tsc_remove(struct platform_device *pdev)
 	clk_put(ts->clk);
 	iounmap(ts->regs);
 	release_mem_region(ts->res->start, resource_size(ts->res));
-	platform_set_drvdata(pdev, NULL);
 	kfree(ts);
 
 	return 0;

drivers/input/touchscreen/tps6507x-ts.c

@@ -17,6 +17,7 @@
 #include <linux/workqueue.h>
 #include <linux/slab.h>
 #include <linux/input.h>
+#include <linux/input-polldev.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/tps6507x.h>
 #include <linux/input/tps6507x-ts.h>
@@ -38,20 +39,13 @@ struct ts_event {
 };
 
 struct tps6507x_ts {
-	struct input_dev	*input_dev;
 	struct device		*dev;
+	struct input_polled_dev	*poll_dev;
+	struct tps6507x_dev	*mfd;
 	char			phys[32];
-	struct delayed_work	work;
-	unsigned		polling;	/* polling is active */
 	struct ts_event		tc;
-	struct tps6507x_dev	*mfd;
-	u16			model;
-	unsigned		pendown;
-	int			irq;
-	void			(*clear_penirq)(void);
-	unsigned long		poll_period;	/* ms */
 	u16			min_pressure;
-	int			vref;		/* non-zero to leave vref on */
+	bool			pendown;
 };
 
 static int tps6507x_read_u8(struct tps6507x_ts *tsc, u8 reg, u8 *data)
@@ -161,14 +155,11 @@ static s32 tps6507x_adc_standby(struct tps6507x_ts *tsc)
 	return ret;
 }
 
-static void tps6507x_ts_handler(struct work_struct *work)
+static void tps6507x_ts_poll(struct input_polled_dev *poll_dev)
 {
-	struct tps6507x_ts *tsc =  container_of(work,
-				struct tps6507x_ts, work.work);
-	struct input_dev *input_dev = tsc->input_dev;
-	int pendown;
-	int schd;
-	int poll = 0;
+	struct tps6507x_ts *tsc = poll_dev->private;
+	struct input_dev *input_dev = poll_dev->input;
+	bool pendown;
 	s32 ret;
 
 	ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_PRESSURE,
@@ -183,7 +174,7 @@ static void tps6507x_ts_handler(struct work_struct *work)
 		input_report_key(input_dev, BTN_TOUCH, 0);
 		input_report_abs(input_dev, ABS_PRESSURE, 0);
 		input_sync(input_dev);
-		tsc->pendown = 0;
+		tsc->pendown = false;
 	}
 
 	if (pendown) {
@@ -208,76 +199,69 @@ static void tps6507x_ts_handler(struct work_struct *work)
 		input_report_abs(input_dev, ABS_Y, tsc->tc.y);
 		input_report_abs(input_dev, ABS_PRESSURE, tsc->tc.pressure);
 		input_sync(input_dev);
-		tsc->pendown = 1;
-		poll = 1;
+		tsc->pendown = true;
 	}
 
 done:
-	/* always poll if not using interrupts */
-	poll = 1;
-
-	if (poll) {
-		schd = schedule_delayed_work(&tsc->work,
-					msecs_to_jiffies(tsc->poll_period));
-		if (schd)
-			tsc->polling = 1;
-		else {
-			tsc->polling = 0;
-			dev_err(tsc->dev, "re-schedule failed");
-		}
-	} else
-		tsc->polling = 0;
-
-	ret = tps6507x_adc_standby(tsc);
+	tps6507x_adc_standby(tsc);
 }
 
 static int tps6507x_ts_probe(struct platform_device *pdev)
 {
-	int error;
-	struct tps6507x_ts *tsc;
 	struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
-	struct touchscreen_init_data *init_data;
+	const struct tps6507x_board *tps_board;
+	const struct touchscreen_init_data *init_data;
+	struct tps6507x_ts *tsc;
+	struct input_polled_dev *poll_dev;
 	struct input_dev *input_dev;
-	struct tps6507x_board *tps_board;
-	int schd;
+	int error;
 
-	/**
+	/*
 	 * tps_board points to pmic related constants
 	 * coming from the board-evm file.
 	 */
-
-	tps_board = (struct tps6507x_board *)tps6507x_dev->dev->platform_data;
-
+	tps_board = dev_get_platdata(tps6507x_dev->dev);
 	if (!tps_board) {
 		dev_err(tps6507x_dev->dev,
 			"Could not find tps6507x platform data\n");
-		return -EIO;
+		return -ENODEV;
 	}
 
-	/**
+	/*
 	 * init_data points to array of regulator_init structures
 	 * coming from the board-evm file.
 	 */
-
 	init_data = tps_board->tps6507x_ts_init_data;
 
 	tsc = kzalloc(sizeof(struct tps6507x_ts), GFP_KERNEL);
 	if (!tsc) {
 		dev_err(tps6507x_dev->dev, "failed to allocate driver data\n");
-		error = -ENOMEM;
-		goto err0;
+		return -ENOMEM;
 	}
 
-	tps6507x_dev->ts = tsc;
 	tsc->mfd = tps6507x_dev;
 	tsc->dev = tps6507x_dev->dev;
-	input_dev = input_allocate_device();
-	if (!input_dev) {
-		dev_err(tsc->dev, "Failed to allocate input device.\n");
+	tsc->min_pressure = init_data ?
+			init_data->min_pressure : TPS_DEFAULT_MIN_PRESSURE;
+
+	snprintf(tsc->phys, sizeof(tsc->phys),
+		 "%s/input0", dev_name(tsc->dev));
+
+	poll_dev = input_allocate_polled_device();
+	if (!poll_dev) {
+		dev_err(tsc->dev, "Failed to allocate polled input device.\n");
 		error = -ENOMEM;
-		goto err1;
+		goto err_free_mem;
 	}
 
+	tsc->poll_dev = poll_dev;
+
+	poll_dev->private = tsc;
+	poll_dev->poll = tps6507x_ts_poll;
+	poll_dev->poll_interval = init_data ?
+			init_data->poll_period : TSC_DEFAULT_POLL_PERIOD;
+
+	input_dev = poll_dev->input;
 	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
 
@@ -286,76 +270,42 @@ static int tps6507x_ts_probe(struct platform_device *pdev)
 	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_10BIT, 0, 0);
 
 	input_dev->name = "TPS6507x Touchscreen";
-	input_dev->id.bustype = BUS_I2C;
-	input_dev->dev.parent = tsc->dev;
-
-	snprintf(tsc->phys, sizeof(tsc->phys),
-		 "%s/input0", dev_name(tsc->dev));
 	input_dev->phys = tsc->phys;
-
-	dev_dbg(tsc->dev, "device: %s\n", input_dev->phys);
-
-	input_set_drvdata(input_dev, tsc);
-
-	tsc->input_dev = input_dev;
-
-	INIT_DELAYED_WORK(&tsc->work, tps6507x_ts_handler);
-
+	input_dev->dev.parent = tsc->dev;
+	input_dev->id.bustype = BUS_I2C;
 	if (init_data) {
-		tsc->poll_period = init_data->poll_period;
-		tsc->vref = init_data->vref;
-		tsc->min_pressure = init_data->min_pressure;
 		input_dev->id.vendor = init_data->vendor;
 		input_dev->id.product = init_data->product;
 		input_dev->id.version = init_data->version;
-	} else {
-		tsc->poll_period = TSC_DEFAULT_POLL_PERIOD;
-		tsc->min_pressure = TPS_DEFAULT_MIN_PRESSURE;
 	}
 
 	error = tps6507x_adc_standby(tsc);
 	if (error)
-		goto err2;
+		goto err_free_polled_dev;
 
-	error = input_register_device(input_dev);
+	error = input_register_polled_device(poll_dev);
 	if (error)
-		goto err2;
-
-	schd = schedule_delayed_work(&tsc->work,
-				     msecs_to_jiffies(tsc->poll_period));
+		goto err_free_polled_dev;
 
-	if (schd)
-		tsc->polling = 1;
-	else {
-		tsc->polling = 0;
-		dev_err(tsc->dev, "schedule failed");
-		goto err2;
-	 }
-	platform_set_drvdata(pdev, tps6507x_dev);
+	platform_set_drvdata(pdev, tsc);
 
 	return 0;
 
-err2:
-	cancel_delayed_work_sync(&tsc->work);
-	input_free_device(input_dev);
-err1:
+err_free_polled_dev:
+	input_free_polled_device(poll_dev);
+err_free_mem:
 	kfree(tsc);
-	tps6507x_dev->ts = NULL;
-err0:
 	return error;
 }
 
 static int tps6507x_ts_remove(struct platform_device *pdev)
 {
-	struct tps6507x_dev *tps6507x_dev = platform_get_drvdata(pdev);
-	struct tps6507x_ts *tsc = tps6507x_dev->ts;
-	struct input_dev *input_dev = tsc->input_dev;
-
-	cancel_delayed_work_sync(&tsc->work);
+	struct tps6507x_ts *tsc = platform_get_drvdata(pdev);
+	struct input_polled_dev *poll_dev = tsc->poll_dev;
 
-	input_unregister_device(input_dev);
+	input_unregister_polled_device(poll_dev);
+	input_free_polled_device(poll_dev);
 
-	tps6507x_dev->ts = NULL;
 	kfree(tsc);
 
 	return 0;

drivers/input/touchscreen/w90p910_ts.c

@@ -318,8 +318,6 @@ static int w90x900ts_remove(struct platform_device *pdev)
 	input_unregister_device(w90p910_ts->input);
 	kfree(w90p910_ts);
 
-	platform_set_drvdata(pdev, NULL);
-
 	return 0;
 }
 

drivers/input/touchscreen/wacom_i2c.c

 /*
  * Wacom Penabled Driver for I2C
  *
- * Copyright (c) 2011 Tatsunosuke Tobita, Wacom.
+ * Copyright (c) 2011 - 2013 Tatsunosuke Tobita, Wacom.
  * <tobita.tatsunosuke@wacom.co.jp>
  *
  * This program is free software; you can redistribute it
@@ -27,7 +27,6 @@
 #define WACOM_CMD_THROW0	0x05
 #define WACOM_CMD_THROW1	0x00
 #define WACOM_QUERY_SIZE	19
-#define WACOM_RETRY_CNT		100
 
 struct wacom_features {
 	int x_max;
@@ -40,6 +39,8 @@ struct wacom_i2c {
 	struct i2c_client *client;
 	struct input_dev *input;
 	u8 data[WACOM_QUERY_SIZE];
+	bool prox;
+	int tool;
 };
 
 static int wacom_query_device(struct i2c_client *client,
@@ -112,9 +113,14 @@ static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
 	y = le16_to_cpup((__le16 *)&data[6]);
 	pressure = le16_to_cpup((__le16 *)&data[8]);
 
+	if (!wac_i2c->prox)
+		wac_i2c->tool = (data[3] & 0x0c) ?
+			BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+
+	wac_i2c->prox = data[3] & 0x20;
+
 	input_report_key(input, BTN_TOUCH, tsw || ers);
-	input_report_key(input, BTN_TOOL_PEN, tsw);
-	input_report_key(input, BTN_TOOL_RUBBER, ers);
+	input_report_key(input, wac_i2c->tool, wac_i2c->prox);
 	input_report_key(input, BTN_STYLUS, f1);
 	input_report_key(input, BTN_STYLUS2, f2);
 	input_report_abs(input, ABS_X, x);