Commit f6049312 authored by David Brownell's avatar David Brownell Committed by Tony Lindgren

ARM: OMAP: abstract debug card setup (smc, leds)

Additional cleanup for debug boards on H2/P2/H3/H4:  move the init
code that's not board-specific into a new file where it can be easily
shared between all the different boards (avoiding code duplication,
and making it easier to support more devices).  Make H4 use that.

This should be easy to drop in to the OMAP1 boards using these debug
cards; the only difference seems to be that the p2 does an extra reset
of the smc using the fpga (probably all boards could do that, if it's
necessary) and doesn't use the gpio mux or request APIs.
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 1c22cc13
...@@ -21,7 +21,7 @@ config MACH_OMAP_GENERIC ...@@ -21,7 +21,7 @@ config MACH_OMAP_GENERIC
config MACH_OMAP_H4 config MACH_OMAP_H4
bool "OMAP 2420 H4 board" bool "OMAP 2420 H4 board"
depends on ARCH_OMAP2 && ARCH_OMAP24XX depends on ARCH_OMAP2 && ARCH_OMAP24XX
select OMAP_DEBUG_LEDS if LEDS || LEDS_OMAP_DEBUG select OMAP_DEBUG_DEVICES
config MACH_OMAP_APOLLON config MACH_OMAP_APOLLON
bool "OMAP 2420 Apollon board" bool "OMAP 2420 Apollon board"
......
...@@ -131,26 +131,6 @@ static struct platform_device h4_flash_device = { ...@@ -131,26 +131,6 @@ static struct platform_device h4_flash_device = {
.resource = &h4_flash_resource, .resource = &h4_flash_resource,
}; };
static struct resource h4_smc91x_resources[] = {
[0] = {
.start = OMAP24XX_ETHR_START, /* Physical */
.end = OMAP24XX_ETHR_START + 0xf,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
.end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device h4_smc91x_device = {
.name = "smc91x",
.id = -1,
.num_resources = ARRAY_SIZE(h4_smc91x_resources),
.resource = h4_smc91x_resources,
};
/* Select between the IrDA and aGPS module /* Select between the IrDA and aGPS module
*/ */
static int h4_select_irda(struct device *dev, int state) static int h4_select_irda(struct device *dev, int state)
...@@ -266,29 +246,14 @@ static struct platform_device h4_lcd_device = { ...@@ -266,29 +246,14 @@ static struct platform_device h4_lcd_device = {
.id = -1, .id = -1,
}; };
static struct resource h4_led_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
},
};
static struct platform_device h4_led_device = {
.name = "omap_dbg_led",
.id = -1,
.num_resources = ARRAY_SIZE(h4_led_resources),
.resource = h4_led_resources,
};
static struct platform_device *h4_devices[] __initdata = { static struct platform_device *h4_devices[] __initdata = {
&h4_smc91x_device,
&h4_flash_device, &h4_flash_device,
&h4_irda_device, &h4_irda_device,
&h4_kp_device, &h4_kp_device,
&h4_lcd_device, &h4_lcd_device,
&h4_led_device,
}; };
static inline void __init h4_init_smc91x(void) static inline void __init h4_init_debug(void)
{ {
/* Make sure CS1 timings are correct */ /* Make sure CS1 timings are correct */
GPMC_CONFIG1_1 = 0x00011200; GPMC_CONFIG1_1 = 0x00011200;
...@@ -301,12 +266,8 @@ static inline void __init h4_init_smc91x(void) ...@@ -301,12 +266,8 @@ static inline void __init h4_init_smc91x(void)
udelay(100); udelay(100);
omap_cfg_reg(M15_24XX_GPIO92); omap_cfg_reg(M15_24XX_GPIO92);
if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) { if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0)
printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", gpmc_cs_free(eth_cs);
OMAP24XX_ETHR_GPIO_IRQ);
return;
}
omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1);
} }
static void __init omap_h4_init_irq(void) static void __init omap_h4_init_irq(void)
...@@ -314,7 +275,6 @@ static void __init omap_h4_init_irq(void) ...@@ -314,7 +275,6 @@ static void __init omap_h4_init_irq(void)
omap2_init_common_hw(); omap2_init_common_hw();
omap_init_irq(); omap_init_irq();
omap_gpio_init(); omap_gpio_init();
h4_init_smc91x();
} }
static struct omap_uart_config h4_uart_config __initdata = { static struct omap_uart_config h4_uart_config __initdata = {
......
...@@ -20,10 +20,15 @@ endchoice ...@@ -20,10 +20,15 @@ endchoice
comment "OMAP Feature Selections" comment "OMAP Feature Selections"
config OMAP_DEBUG_LEDS config OMAP_DEBUG_DEVICES
bool bool
help help
For debug card leds on TI reference boards. For debug cards on TI reference boards.
config OMAP_DEBUG_LEDS
bool
depends on OMAP_DEBUG_DEVICES
default y if LEDS || LEDS_OMAP_DEBUG
config OMAP_RESET_CLOCKS config OMAP_RESET_CLOCKS
bool "Reset unused clocks during boot" bool "Reset unused clocks during boot"
......
...@@ -17,4 +17,5 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o ...@@ -17,4 +17,5 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
obj-$(CONFIG_CPU_FREQ) += cpu-omap.o obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
/*
* linux/arch/arm/plat-omap/debug-devices.c
*
* Copyright (C) 2005 Nokia Corporation
* Modified from mach-omap2/board-h4.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
/* Many OMAP development platforms reuse the same "debug board"; these
* platforms include H2, H3, H4, and Perseus2.
*/
static struct resource smc91x_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
},
[1] = {
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct resource led_resources[] = {
[0] = {
.flags = IORESOURCE_MEM,
},
};
static struct platform_device led_device = {
.name = "omap_dbg_led",
.id = -1,
.num_resources = ARRAY_SIZE(led_resources),
.resource = led_resources,
};
static struct platform_device *debug_devices[] __initdata = {
&smc91x_device,
&led_device,
/* ps2 kbd + mouse ports */
/* 4 extra uarts */
/* 6 input dip switches */
/* 8 output pins */
};
int __init debug_card_init(u32 addr, unsigned gpio)
{
int status;
smc91x_resources[0].start = addr + 0x300;
smc91x_resources[0].end = addr + 0x30f;
smc91x_resources[1].start = OMAP_GPIO_IRQ(gpio);
smc91x_resources[1].end = OMAP_GPIO_IRQ(gpio);
status = omap_request_gpio(gpio);
if (status < 0) {
printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio);
return status;
}
omap_set_gpio_direction(gpio, 1);
led_resources[0].start = addr;
led_resources[0].end = addr + SZ_4K - 1;
return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices));
}
...@@ -179,4 +179,8 @@ extern const void *omap_get_var_config(u16 tag, size_t *len); ...@@ -179,4 +179,8 @@ extern const void *omap_get_var_config(u16 tag, size_t *len);
extern struct omap_board_config_kernel *omap_board_config; extern struct omap_board_config_kernel *omap_board_config;
extern int omap_board_config_size; extern int omap_board_config_size;
/* for TI reference platforms sharing the same debug card */
extern int debug_card_init(u32 addr, unsigned gpio);
#endif #endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment