Merge tag 'amlogic-dt64' of...

Merge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt

arm64: Amlogic DT updates for v4.21
Some highlights:
- new boards: Phicomm N1 (S905D), Libretech S805-AC
- fixes for pinmux pad bias, GPIO line names
- AXG: enable SCPI, add secure monitor

* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (26 commits)
  arm64: dts: meson-gx: Add Internal Clock Measurer node
  arm64: dts: amlogic: Add all CPUs in cooling maps
  arm64: dts: meson: add libretech aml-s805x-ac board
  dt-bindings: arm: amlogic: add libretech aml-s805x-ac bindings
  dt-bindings: arm: amlogic: Add Phicomm N1
  dt-bindings: Add vendor prefix for PHICOMM Co., Ltd.
  arm64: dts: meson-gxl: add support for phicomm n1
  arm64: dts: meson: consistently disable pin bias
  arm64: dts: meson: disable pad bias for mmc pinmuxes
  arm64: dts: meson: remove extra subnode in mmc clk_gate pinmux
  arm64: dts: meson: s400: add bcm bluetooth device
  arm64: dts: meson: p230: disable advertisement EEE for GbE.
  arm64: dts: meson-axg: enable SCPI
  Documentation: bindings: Add missing Amlogic SCPI sensor bindings
  arm64: dts: meson-axg: correct sram shared mem unit-address
  arm64: dts: meson-axg: fix mailbox address
  arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply
  arm64: dts: meson-axg: add secure monitor
  arm64: dts: meson-axg: s400: add cts-rts to the bluetooth uart
  arm64: dts: meson-gxl-khadas-vim: fix GPIO lines names
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/amlogic,scpi.txt

@@ -17,4 +17,11 @@ Required sub-node properties:
 - compatible : should be "amlogic,meson-gxbb-scp-shmem" for SRAM based shared
 		memory on Amlogic GXBB SoC.
 
+Sensor bindings for the sensors based on SCPI Message Protocol
+--------------------------------------------------------------
+SCPI provides an API to access the various sensors on the SoC.
+
+Required properties:
+- compatible : should be "amlogic,meson-gxbb-scpi-sensors".
+
 [0] Documentation/devicetree/bindings/arm/arm,scpi.txt

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -91,8 +91,10 @@ Board compatible values (alphabetically, grouped by SoC):
 
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
+  - "phicomm,n1" (Meson gxl s905d)
 
   - "amlogic,p241" (Meson gxl s805x)
+  - "libretech,aml-s805x-ac" (Meson gxl s805x)
 
   - "amlogic,p281" (Meson gxl s905w)
   - "oranth,tx3-mini" (Meson gxl s905w)

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -296,6 +296,7 @@ panasonic	Panasonic Corporation
 parade	Parade Technologies Inc.
 pericom	Pericom Technology Inc.
 pervasive	Pervasive Displays, Inc.
+phicomm PHICOMM Co., Ltd.
 phytec	PHYTEC Messtechnik GmbH
 picochip	Picochip Ltd
 pine64	Pine64

arch/arm64/boot/dts/amlogic/Makefile

@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-libretech-ac.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
@@ -18,6 +19,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb

arch/arm64/boot/dts/amlogic/meson-axg-s400.dts

@@ -60,7 +60,7 @@ aliases {
 		serial1 = &uart_A;
 	};
 
-	linein: audio-codec@0 {
+	linein: audio-codec-0 {
 		#sound-dai-cells = <0>;
 		compatible = "everest,es7241";
 		VDDA-supply = <&vcc_3v3>;
@@ -70,7 +70,7 @@ linein: audio-codec@0 {
 		sound-name-prefix = "Linein";
 	};
 
-	lineout: audio-codec@1 {
+	lineout: audio-codec-1 {
 		#sound-dai-cells = <0>;
 		compatible = "everest,es7154";
 		VDD-supply = <&vcc_3v3>;
@@ -79,14 +79,14 @@ lineout: audio-codec@1 {
 		sound-name-prefix = "Lineout";
 	};
 
-	spdif_dit: audio-codec@2 {
+	spdif_dit: audio-codec-2 {
 		#sound-dai-cells = <0>;
 		compatible = "linux,spdif-dit";
 		status = "okay";
 		sound-name-prefix = "DIT";
 	};
 
-	dmics: audio-codec@3 {
+	dmics: audio-codec-3 {
 		#sound-dai-cells = <0>;
 		compatible = "dmic-codec";
 		num-channels = <7>;
@@ -272,31 +272,31 @@ sound {
 				       <393216000>;
 		status = "okay";
 
-		dai-link@0 {
+		dai-link-0 {
 			sound-dai = <&frddr_a>;
 		};
 
-		dai-link@1 {
+		dai-link-1 {
 			sound-dai = <&frddr_b>;
 		};
 
-		dai-link@2 {
+		dai-link-2 {
 			sound-dai = <&frddr_c>;
 		};
 
-		dai-link@3 {
+		dai-link-3 {
 			sound-dai = <&toddr_a>;
 		};
 
-		dai-link@4 {
+		dai-link-4 {
 			sound-dai = <&toddr_b>;
 		};
 
-		dai-link@5 {
+		dai-link-5 {
 			sound-dai = <&toddr_c>;
 		};
 
-		dai-link@6 {
+		dai-link-6 {
 			sound-dai = <&tdmif_c>;
 			dai-format = "i2s";
 			dai-tdm-slot-tx-mask-2 = <1 1>;
@@ -317,7 +317,7 @@ codec@2 {
 
 		};
 
-		dai-link@7 {
+		dai-link-7 {
 			sound-dai = <&spdifout>;
 
 			codec {
@@ -325,7 +325,7 @@ codec {
 			};
 		};
 
-		dai-link@8 {
+		dai-link-8 {
 			sound-dai = <&pdm>;
 
 			codec {
@@ -543,8 +543,14 @@ &toddr_c {
 
 &uart_A {
 	status = "okay";
-	pinctrl-0 = <&uart_a_pins>;
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
 	pinctrl-names = "default";
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_21 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &uart_AO {

arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi

@@ -125,6 +125,7 @@ &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
 };
 
 &hdmi_tx_tmds_port {

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -262,6 +262,11 @@ uart_C: serial@8700 {
 				status = "disabled";
 			};
 
+			clock-measure@8758 {
+				compatible = "amlogic,meson-gx-clk-measure";
+				reg = <0x0 0x8758 0x0 0x10>;
+			};
+
 			i2c_B: i2c@87c0 {
 				compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
 				reg = <0x0 0x087c0 0x0 0x20>;

arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts

@@ -191,7 +191,7 @@ &ir {
 	pinctrl-names = "default";
 };
 
-&pinctrl_aobus {
+&gpio_ao {
 	gpio-line-names = "UART TX", "UART RX", "Power Control", "Power Key In",
 			  "VCCK En", "CON1 Header Pin31",
 			  "I2S Header Pin6", "IR In", "I2S Header Pin7",
@@ -201,7 +201,7 @@ &pinctrl_aobus {
 			  "";
 };
 
-&pinctrl_periphs {
+&gpio {
 	gpio-line-names = /* Bank GPIOZ */
 			  "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
 			  "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -187,7 +187,7 @@ &ir {
 	pinctrl-names = "default";
 };
 
-&pinctrl_aobus {
+&gpio_ao {
 	gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
 			  "USB HUB nRESET", "USB OTG Power En",
 			  "J7 Header Pin2", "IR In", "J7 Header Pin4",
@@ -197,7 +197,7 @@ &pinctrl_aobus {
 			  "";
 };
 
-&pinctrl_periphs {
+&gpio {
 	gpio-line-names = /* Bank GPIOZ */
 			  "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk",
 			  "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2",

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -81,6 +81,7 @@ uart_ao_a_pins: uart_ao_a {
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
+				bias-disable;
 			};
 		};
 
@@ -89,6 +90,7 @@ mux {
 				groups = "uart_cts_ao_a",
 				       "uart_rts_ao_a";
 				function = "uart_ao";
+				bias-disable;
 			};
 		};
 
@@ -96,6 +98,7 @@ uart_ao_b_pins: uart_ao_b {
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
 				function = "uart_ao_b";
+				bias-disable;
 			};
 		};
 
@@ -104,6 +107,7 @@ mux {
 				groups = "uart_cts_ao_b",
 				       "uart_rts_ao_b";
 				function = "uart_ao_b";
+				bias-disable;
 			};
 		};
 
@@ -111,6 +115,7 @@ remote_input_ao_pins: remote_input_ao {
 			mux {
 				groups = "remote_input_ao";
 				function = "remote_input_ao";
+				bias-disable;
 			};
 		};
 
@@ -119,6 +124,7 @@ mux {
 				groups = "i2c_sck_ao",
 				       "i2c_sda_ao";
 				function = "i2c_ao";
+				bias-disable;
 			};
 		};
 
@@ -126,6 +132,7 @@ pwm_ao_a_3_pins: pwm_ao_a_3 {
 			mux {
 				groups = "pwm_ao_a_3";
 				function = "pwm_ao_a_3";
+				bias-disable;
 			};
 		};
 
@@ -133,6 +140,7 @@ pwm_ao_a_6_pins: pwm_ao_a_6 {
 			mux {
 				groups = "pwm_ao_a_6";
 				function = "pwm_ao_a_6";
+				bias-disable;
 			};
 		};
 
@@ -140,6 +148,7 @@ pwm_ao_a_12_pins: pwm_ao_a_12 {
 			mux {
 				groups = "pwm_ao_a_12";
 				function = "pwm_ao_a_12";
+				bias-disable;
 			};
 		};
 
@@ -147,6 +156,7 @@ pwm_ao_b_pins: pwm_ao_b {
 			mux {
 				groups = "pwm_ao_b";
 				function = "pwm_ao_b";
+				bias-disable;
 			};
 		};
 
@@ -154,6 +164,7 @@ i2s_am_clk_pins: i2s_am_clk {
 			mux {
 				groups = "i2s_am_clk";
 				function = "i2s_out_ao";
+				bias-disable;
 			};
 		};
 
@@ -161,6 +172,7 @@ i2s_out_ao_clk_pins: i2s_out_ao_clk {
 			mux {
 				groups = "i2s_out_ao_clk";
 				function = "i2s_out_ao";
+				bias-disable;
 			};
 		};
 
@@ -168,6 +180,7 @@ i2s_out_lr_clk_pins: i2s_out_lr_clk {
 			mux {
 				groups = "i2s_out_lr_clk";
 				function = "i2s_out_ao";
+				bias-disable;
 			};
 		};
 
@@ -175,6 +188,7 @@ i2s_out_ch01_ao_pins: i2s_out_ch01_ao {
 			mux {
 				groups = "i2s_out_ch01_ao";
 				function = "i2s_out_ao";
+				bias-disable;
 			};
 		};
 
@@ -182,6 +196,7 @@ i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
 			mux {
 				groups = "i2s_out_ch23_ao";
 				function = "i2s_out_ao";
+				bias-disable;
 			};
 		};
 
@@ -189,6 +204,7 @@ i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
 			mux {
 				groups = "i2s_out_ch45_ao";
 				function = "i2s_out_ao";
+				bias-disable;
 			};
 		};
 
@@ -203,6 +219,7 @@ spdif_out_ao_13_pins: spdif_out_ao_13 {
 			mux {
 				groups = "spdif_out_ao_13";
 				function = "spdif_out_ao";
+				bias-disable;
 			};
 		};
 
@@ -210,6 +227,7 @@ ao_cec_pins: ao_cec {
 			mux {
 				groups = "ao_cec";
 				function = "cec_ao";
+				bias-disable;
 			};
 		};
 
@@ -217,6 +235,7 @@ ee_cec_pins: ee_cec {
 			mux {
 				groups = "ee_cec";
 				function = "cec_ao";
+				bias-disable;
 			};
 		};
 	};
@@ -282,6 +301,10 @@ &clkc_AO {
 	compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
 };
 
+&efuse {
+	clocks = <&clkc CLKID_EFUSE>;
+};
+
 &ethmac {
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_FCLK_DIV2>,
@@ -359,6 +382,7 @@ mux {
 				       "emmc_cmd",
 				       "emmc_clk";
 				function = "emmc";
+				bias-disable;
 			};
 		};
 
@@ -366,6 +390,7 @@ emmc_ds_pins: emmc-ds {
 			mux {
 				groups = "emmc_ds";
 				function = "emmc";
+				bias-disable;
 			};
 		};
 
@@ -373,9 +398,6 @@ emmc_clk_gate_pins: emmc_clk_gate {
 			mux {
 				groups = "BOOT_8";
 				function = "gpio_periphs";
-			};
-			cfg-pull-down {
-				pins = "BOOT_8";
 				bias-pull-down;
 			};
 		};
@@ -387,6 +409,7 @@ mux {
 				       "nor_c",
 				       "nor_cs";
 				function = "nor";
+				bias-disable;
 			};
 		};
 
@@ -396,6 +419,7 @@ mux {
 					"spi_mosi",
 					"spi_sclk";
 				function = "spi";
+				bias-disable;
 			};
 		};
 
@@ -403,6 +427,7 @@ spi_ss0_pins: spi-ss0 {
 			mux {
 				groups = "spi_ss0";
 				function = "spi";
+				bias-disable;
 			};
 		};
 
@@ -415,6 +440,7 @@ mux {
 				       "sdcard_cmd",
 				       "sdcard_clk";
 				function = "sdcard";
+				bias-disable;
 			};
 		};
 
@@ -422,9 +448,6 @@ sdcard_clk_gate_pins: sdcard_clk_gate {
 			mux {
 				groups = "CARD_2";
 				function = "gpio_periphs";
-			};
-			cfg-pull-down {
-				pins = "CARD_2";
 				bias-pull-down;
 			};
 		};
@@ -438,6 +461,7 @@ mux {
 				       "sdio_cmd",
 				       "sdio_clk";
 				function = "sdio";
+				bias-disable;
 			};
 		};
 
@@ -445,9 +469,6 @@ sdio_clk_gate_pins: sdio_clk_gate {
 			mux {
 				groups = "GPIOX_4";
 				function = "gpio_periphs";
-			};
-			cfg-pull-down {
-				pins = "GPIOX_4";
 				bias-pull-down;
 			};
 		};
@@ -456,6 +477,7 @@ sdio_irq_pins: sdio_irq {
 			mux {
 				groups = "sdio_irq";
 				function = "sdio";
+				bias-disable;
 			};
 		};
 
@@ -464,6 +486,7 @@ mux {
 				groups = "uart_tx_a",
 				       "uart_rx_a";
 				function = "uart_a";
+				bias-disable;
 			};
 		};
 
@@ -472,6 +495,7 @@ mux {
 				groups = "uart_cts_a",
 				       "uart_rts_a";
 				function = "uart_a";
+				bias-disable;
 			};
 		};
 
@@ -480,6 +504,7 @@ mux {
 				groups = "uart_tx_b",
 				       "uart_rx_b";
 				function = "uart_b";
+				bias-disable;
 			};
 		};
 
@@ -488,6 +513,7 @@ mux {
 				groups = "uart_cts_b",
 				       "uart_rts_b";
 				function = "uart_b";
+				bias-disable;
 			};
 		};
 
@@ -496,6 +522,7 @@ mux {
 				groups = "uart_tx_c",
 				       "uart_rx_c";
 				function = "uart_c";
+				bias-disable;
 			};
 		};
 
@@ -504,6 +531,7 @@ mux {
 				groups = "uart_cts_c",
 				       "uart_rts_c";
 				function = "uart_c";
+				bias-disable;
 			};
 		};
 
@@ -512,6 +540,7 @@ mux {
 				groups = "i2c_sck_a",
 				       "i2c_sda_a";
 				function = "i2c_a";
+				bias-disable;
 			};
 		};
 
@@ -520,6 +549,7 @@ mux {
 				groups = "i2c_sck_b",
 				       "i2c_sda_b";
 				function = "i2c_b";
+				bias-disable;
 			};
 		};
 
@@ -528,6 +558,7 @@ mux {
 				groups = "i2c_sck_c",
 				       "i2c_sda_c";
 				function = "i2c_c";
+				bias-disable;
 			};
 		};
 
@@ -548,6 +579,7 @@ mux {
 				       "eth_txd2",
 				       "eth_txd3";
 				function = "eth";
+				bias-disable;
 			};
 		};
 
@@ -563,6 +595,7 @@ mux {
 				       "eth_txd0",
 				       "eth_txd1";
 				function = "eth";
+				bias-disable;
 			};
 		};
 
@@ -570,6 +603,7 @@ pwm_a_x_pins: pwm_a_x {
 			mux {
 				groups = "pwm_a_x";
 				function = "pwm_a_x";
+				bias-disable;
 			};
 		};
 
@@ -577,6 +611,7 @@ pwm_a_y_pins: pwm_a_y {
 			mux {
 				groups = "pwm_a_y";
 				function = "pwm_a_y";
+				bias-disable;
 			};
 		};
 
@@ -584,6 +619,7 @@ pwm_b_pins: pwm_b {
 			mux {
 				groups = "pwm_b";
 				function = "pwm_b";
+				bias-disable;
 			};
 		};
 
@@ -591,6 +627,7 @@ pwm_d_pins: pwm_d {
 			mux {
 				groups = "pwm_d";
 				function = "pwm_d";
+				bias-disable;
 			};
 		};
 
@@ -598,6 +635,7 @@ pwm_e_pins: pwm_e {
 			mux {
 				groups = "pwm_e";
 				function = "pwm_e";
+				bias-disable;
 			};
 		};
 
@@ -605,6 +643,7 @@ pwm_f_x_pins: pwm_f_x {
 			mux {
 				groups = "pwm_f_x";
 				function = "pwm_f_x";
+				bias-disable;
 			};
 		};
 
@@ -612,6 +651,7 @@ pwm_f_y_pins: pwm_f_y {
 			mux {
 				groups = "pwm_f_y";
 				function = "pwm_f_y";
+				bias-disable;
 			};
 		};
 
@@ -619,6 +659,7 @@ hdmi_hpd_pins: hdmi_hpd {
 			mux {
 				groups = "hdmi_hpd";
 				function = "hdmi_hpd";
+				bias-disable;
 			};
 		};
 
@@ -626,6 +667,7 @@ hdmi_i2c_pins: hdmi_i2c {
 			mux {
 				groups = "hdmi_sda", "hdmi_scl";
 				function = "hdmi_i2c";
+				bias-disable;
 			};
 		};
 
@@ -633,6 +675,7 @@ i2sout_ch23_y_pins: i2sout_ch23_y {
 			mux {
 				groups = "i2sout_ch23_y";
 				function = "i2s_out";
+				bias-disable;
 			};
 		};
 
@@ -640,6 +683,7 @@ i2sout_ch45_y_pins: i2sout_ch45_y {
 			mux {
 				groups = "i2sout_ch45_y";
 				function = "i2s_out";
+				bias-disable;
 			};
 		};
 
@@ -647,6 +691,7 @@ i2sout_ch67_y_pins: i2sout_ch67_y {
 			mux {
 				groups = "i2sout_ch67_y";
 				function = "i2s_out";
+				bias-disable;
 			};
 		};
 
@@ -654,6 +699,7 @@ spdif_out_y_pins: spdif_out_y {
 			mux {
 				groups = "spdif_out_y";
 				function = "spdif_out";
+				bias-disable;
 			};
 		};
 	};

arch/arm64/boot/dts/amlogic/meson-gxl-s805x-libretech-ac.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ * Author: Jerome Brunet <jbrunet@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+
+#include "meson-gxl-s905x.dtsi"
+
+/ {
+	compatible = "libretech,aml-s805x-ac", "amlogic,s805x",
+		     "amlogic,meson-gxl";
+	model = "Libre Computer Board AML-S805X-AC";
+
+	aliases {
+		serial0 = &uart_AO;
+		ethernet0 = &ethmac;
+		spi0 = &spifc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cvbs-connector {
+		/*
+		 * The pads are present but no connector is soldered on
+		 * 2J2, so keep this off by default.
+		 */
+		status = "disabled";
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	dc_5v: regulator-dc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "DC_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x20000000>;
+	};
+
+	vcck: regulator-vcck {
+		compatible = "regulator-fixed";
+		regulator-name = "VCCK";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_5v>;
+
+		/*
+		 * This is controlled by GPIOAO_9 we reserve this but
+		 * claiming it as done below reset the board anyway
+		 * Need to investigate this
+		 *
+		 * gpio = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+		 * enable-active-high;
+		 */
+		regulator-always-on;
+	};
+
+	vcc_3v3: regulator-vcc_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_5v>;
+		regulator-always-on;
+	};
+
+	vddio_boot: regulator-vddio_boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+		regulator-always-on;
+	};
+};
+
+&cec_AO {
+	status = "okay";
+	pinctrl-0 = <&ao_cec_pins>;
+	pinctrl-names = "default";
+	hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+};
+
+&internal_phy {
+	pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
+&gpio_ao {
+	gpio-line-names = "UART TX",
+			  "UART RX",
+			  "7J1 Header Pin31",
+			  "", "", "", "",
+			  "IR In",
+			  "HDMI CEC",
+			  "5V VCCK Regulator",
+			  /* GPIO_TEST_N */
+			  "";
+};
+
+&gpio {
+	gpio-line-names = /* Bank GPIOZ */
+			  "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "",
+			  "Eth Link LED", "Eth Activity LED",
+			  /* Bank GPIOH */
+			  "HDMI HPD", "HDMI SDA", "HDMI SCL",
+			  "", "7J1 Header Pin13",
+			  "7J1 Header Pin15",
+			  "7J1 Header Pin7",
+			  "7J1 Header Pin12",
+			  "7J1 Header Pin16",
+			  "7J1 Header Pin18",
+			  /* Bank BOOT */
+			  "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3",
+			  "eMMC D4", "eMMC D5", "eMMC D6", "eMMC D7",
+			  "eMMC Clk", "eMMC Reset", "eMMC CMD",
+			  "SPI NOR MOSI", "SPI NOR MISO", "SPI NOR Clk",
+			  "", "SPI NOR Chip Select",
+			  /* Bank CARD */
+			  "", "", "", "", "", "", "",
+			  /* Bank GPIODV */
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "", "", "", "", "",
+			  "7J1 Header Pin27", "7J1 Header Pin28", "",
+			  "7J1 Header Pin29",
+			  "VCCK Regulator", "VDDEE Regulator",
+			  /* Bank GPIOX */
+			  "7J1 Header Pin22", "7J1 Header Pin26",
+			  "7J1 Header Pin36", "7J1 Header Pin38",
+			  "7J1 Header Pin40", "7J1 Header Pin37",
+			  "7J1 Header Pin33", "7J1 Header Pin35",
+			  "7J1 Header Pin19", "7J1 Header Pin21",
+			  "7J1 Header Pin24", "7J1 Header Pin23",
+			  "7J1 Header Pin8", "7J1 Header Pin10",
+			  "", "", "7J1 Header Pin32", "", "",
+			  /* Bank GPIOCLK */
+			  "", "";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-1 = <&emmc_clk_gate_pins>;
+	pinctrl-names = "default", "clk-gate";
+
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <200000000>;
+	disable-wp;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&spifc {
+	status = "okay";
+	pinctrl-0 = <&nor_pins>;
+	pinctrl-names = "default";
+
+	w25q32: spi-flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <3000000>;
+	};
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0 {
+	status = "okay";
+};

arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts

@@ -86,6 +86,7 @@ external_phy: ethernet-phy@0 {
 		max-speed = <1000>;
 		interrupt-parent = <&gpio_intc>;
 		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+		eee-broken-1000t;
 	};
 };
 

arch/arm64/boot/dts/amlogic/meson-gxl-s905d-phicomm-n1.dts

+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2018 He Yangxuan
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905d-p230.dts"
+
+/ {
+	compatible = "phicomm,n1", "amlogic,s905d", "amlogic,meson-gxl";
+	model = "Phicomm N1";
+
+	cvbs-connector {
+		status = "disabled";
+	};
+};
+
+&cvbs_vdac_port {
+	status = "disabled";
+};

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts

@@ -78,6 +78,7 @@ &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
 };
 
 &hdmi_tx_tmds_port {
@@ -112,7 +113,7 @@ &ir {
 	linux,rc-map-name = "rc-geekbox";
 };
 
-&pinctrl_aobus {
+&gpio_ao {
 	gpio-line-names = "UART TX",
 			  "UART RX",
 			  "Power Key In",
@@ -127,7 +128,7 @@ &pinctrl_aobus {
 			  "";
 };
 
-&pinctrl_periphs {
+&gpio {
 	gpio-line-names = /* Bank GPIOZ */
 			  "", "", "", "", "", "", "",
 			  "", "", "", "", "", "", "",
@@ -187,6 +188,13 @@ brcmf: wifi@1 {
 	};
 };
 
+&uart_A {
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 /* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */
 &uart_AO {
 	status = "okay";

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts

@@ -155,6 +155,7 @@ &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
 };
 
 &hdmi_tx_tmds_port {
@@ -163,7 +164,7 @@ hdmi_tx_tmds_out: endpoint {
 	};
 };
 
-&pinctrl_aobus {
+&gpio_ao {
 	gpio-line-names = "UART TX",
 			  "UART RX",
 			  "Blue LED",
@@ -178,7 +179,7 @@ &pinctrl_aobus {
 			  "7J1 Header Pin15";
 };
 
-&pinctrl_periphs {
+&gpio {
 	gpio-line-names = /* Bank GPIOZ */
 			  "", "", "", "", "", "", "",
 			  "", "", "", "", "", "", "",

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts

@@ -51,6 +51,7 @@ &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
 };
 
 &hdmi_tx_tmds_port {

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -75,6 +75,10 @@ usb3_phy: phy@78080 {
 	};
 };
 
+&efuse {
+	clocks = <&clkc CLKID_EFUSE>;
+};
+
 &ethmac {
 	reg = <0x0 0xc9410000 0x0 0x10000
 	       0x0 0xc8834540 0x0 0x4>;
@@ -112,6 +116,7 @@ uart_ao_a_pins: uart_ao_a {
 			mux {
 				groups = "uart_tx_ao_a", "uart_rx_ao_a";
 				function = "uart_ao";
+				bias-disable;
 			};
 		};
 
@@ -120,6 +125,7 @@ mux {
 				groups = "uart_cts_ao_a",
 				       "uart_rts_ao_a";
 				function = "uart_ao";
+				bias-disable;
 			};
 		};
 
@@ -127,6 +133,7 @@ uart_ao_b_pins: uart_ao_b {
 			mux {
 				groups = "uart_tx_ao_b", "uart_rx_ao_b";
 				function = "uart_ao_b";
+				bias-disable;
 			};
 		};
 
@@ -134,6 +141,7 @@ uart_ao_b_0_1_pins: uart_ao_b_0_1 {
 			mux {
 				groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1";
 				function = "uart_ao_b";
+				bias-disable;
 			};
 		};
 
@@ -142,6 +150,7 @@ mux {
 				groups = "uart_cts_ao_b",
 				       "uart_rts_ao_b";
 				function = "uart_ao_b";
+				bias-disable;
 			};
 		};
 
@@ -149,6 +158,7 @@ remote_input_ao_pins: remote_input_ao {
 			mux {
 				groups = "remote_input_ao";
 				function = "remote_input_ao";
+				bias-disable;
 			};
 		};
 
@@ -157,6 +167,7 @@ mux {
 				groups = "i2c_sck_ao",
 				       "i2c_sda_ao";
 				function = "i2c_ao";
+				bias-disable;
 			};
 		};
 
@@ -164,6 +175,7 @@ pwm_ao_a_3_pins: pwm_ao_a_3 {
 			mux {
 				groups = "pwm_ao_a_3";
 				function = "pwm_ao_a";
+				bias-disable;
 			};
 		};
 
@@ -171,6 +183,7 @@ pwm_ao_a_8_pins: pwm_ao_a_8 {
 			mux {
 				groups = "pwm_ao_a_8";
 				function = "pwm_ao_a";
+				bias-disable;
 			};
 		};
 
@@ -178,6 +191,7 @@ pwm_ao_b_pins: pwm_ao_b {
 			mux {
 				groups = "pwm_ao_b";
 				function = "pwm_ao_b";
+				bias-disable;
 			};
 		};
 
@@ -185,6 +199,7 @@ pwm_ao_b_6_pins: pwm_ao_b_6 {
 			mux {
 				groups = "pwm_ao_b_6";
 				function = "pwm_ao_b";
+				bias-disable;
 			};
 		};
 
@@ -192,6 +207,7 @@ i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
 			mux {
 				groups = "i2s_out_ch23_ao";
 				function = "i2s_out_ao";
+				bias-disable;
 			};
 		};
 
@@ -199,6 +215,7 @@ i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
 			mux {
 				groups = "i2s_out_ch45_ao";
 				function = "i2s_out_ao";
+				bias-disable;
 			};
 		};
 
@@ -206,6 +223,7 @@ spdif_out_ao_6_pins: spdif_out_ao_6 {
 			mux {
 				groups = "spdif_out_ao_6";
 				function = "spdif_out_ao";
+				bias-disable;
 			};
 		};
 
@@ -213,6 +231,7 @@ spdif_out_ao_9_pins: spdif_out_ao_9 {
 			mux {
 				groups = "spdif_out_ao_9";
 				function = "spdif_out_ao";
+				bias-disable;
 			};
 		};
 
@@ -220,6 +239,7 @@ ao_cec_pins: ao_cec {
 			mux {
 				groups = "ao_cec";
 				function = "cec_ao";
+				bias-disable;
 			};
 		};
 
@@ -227,6 +247,7 @@ ee_cec_pins: ee_cec {
 			mux {
 				groups = "ee_cec";
 				function = "cec_ao";
+				bias-disable;
 			};
 		};
 	};
@@ -306,6 +327,7 @@ mux {
 				       "emmc_cmd",
 				       "emmc_clk";
 				function = "emmc";
+				bias-disable;
 			};
 		};
 
@@ -313,6 +335,7 @@ emmc_ds_pins: emmc-ds {
 			mux {
 				groups = "emmc_ds";
 				function = "emmc";
+				bias-disable;
 			};
 		};
 
@@ -320,9 +343,6 @@ emmc_clk_gate_pins: emmc_clk_gate {
 			mux {
 				groups = "BOOT_8";
 				function = "gpio_periphs";
-			};
-			cfg-pull-down {
-				pins = "BOOT_8";
 				bias-pull-down;
 			};
 		};
@@ -334,6 +354,7 @@ mux {
 				       "nor_c",
 				       "nor_cs";
 				function = "nor";
+				bias-disable;
 			};
 		};
 
@@ -343,6 +364,7 @@ mux {
 					"spi_mosi",
 					"spi_sclk";
 				function = "spi";
+				bias-disable;
 			};
 		};
 
@@ -350,6 +372,7 @@ spi_ss0_pins: spi-ss0 {
 			mux {
 				groups = "spi_ss0";
 				function = "spi";
+				bias-disable;
 			};
 		};
 
@@ -362,6 +385,7 @@ mux {
 				       "sdcard_cmd",
 				       "sdcard_clk";
 				function = "sdcard";
+				bias-disable;
 			};
 		};
 
@@ -369,9 +393,6 @@ sdcard_clk_gate_pins: sdcard_clk_gate {
 			mux {
 				groups = "CARD_2";
 				function = "gpio_periphs";
-			};
-			cfg-pull-down {
-				pins = "CARD_2";
 				bias-pull-down;
 			};
 		};
@@ -385,6 +406,7 @@ mux {
 				       "sdio_cmd",
 				       "sdio_clk";
 				function = "sdio";
+				bias-disable;
 			};
 		};
 
@@ -392,9 +414,6 @@ sdio_clk_gate_pins: sdio_clk_gate {
 			mux {
 				groups = "GPIOX_4";
 				function = "gpio_periphs";
-			};
-			cfg-pull-down {
-				pins = "GPIOX_4";
 				bias-pull-down;
 			};
 		};
@@ -403,6 +422,7 @@ sdio_irq_pins: sdio_irq {
 			mux {
 				groups = "sdio_irq";
 				function = "sdio";
+				bias-disable;
 			};
 		};
 
@@ -411,6 +431,7 @@ mux {
 				groups = "uart_tx_a",
 				       "uart_rx_a";
 				function = "uart_a";
+				bias-disable;
 			};
 		};
 
@@ -419,6 +440,7 @@ mux {
 				groups = "uart_cts_a",
 				       "uart_rts_a";
 				function = "uart_a";
+				bias-disable;
 			};
 		};
 
@@ -427,6 +449,7 @@ mux {
 				groups = "uart_tx_b",
 				       "uart_rx_b";
 				function = "uart_b";
+				bias-disable;
 			};
 		};
 
@@ -435,6 +458,7 @@ mux {
 				groups = "uart_cts_b",
 				       "uart_rts_b";
 				function = "uart_b";
+				bias-disable;
 			};
 		};
 
@@ -443,6 +467,7 @@ mux {
 				groups = "uart_tx_c",
 				       "uart_rx_c";
 				function = "uart_c";
+				bias-disable;
 			};
 		};
 
@@ -451,6 +476,7 @@ mux {
 				groups = "uart_cts_c",
 				       "uart_rts_c";
 				function = "uart_c";
+				bias-disable;
 			};
 		};
 
@@ -459,6 +485,7 @@ mux {
 				groups = "i2c_sck_a",
 				     "i2c_sda_a";
 				function = "i2c_a";
+				bias-disable;
 			};
 		};
 
@@ -467,6 +494,7 @@ mux {
 				groups = "i2c_sck_b",
 				      "i2c_sda_b";
 				function = "i2c_b";
+				bias-disable;
 			};
 		};
 
@@ -475,6 +503,7 @@ mux {
 				groups = "i2c_sck_c",
 				      "i2c_sda_c";
 				function = "i2c_c";
+				bias-disable;
 			};
 		};
 
@@ -495,6 +524,7 @@ mux {
 				       "eth_txd2",
 				       "eth_txd3";
 				function = "eth";
+				bias-disable;
 			};
 		};
 
@@ -502,6 +532,7 @@ eth_link_led_pins: eth_link_led {
 			mux {
 				groups = "eth_link_led";
 				function = "eth_led";
+				bias-disable;
 			};
 		};
 
@@ -516,6 +547,7 @@ pwm_a_pins: pwm_a {
 			mux {
 				groups = "pwm_a";
 				function = "pwm_a";
+				bias-disable;
 			};
 		};
 
@@ -523,6 +555,7 @@ pwm_b_pins: pwm_b {
 			mux {
 				groups = "pwm_b";
 				function = "pwm_b";
+				bias-disable;
 			};
 		};
 
@@ -530,6 +563,7 @@ pwm_c_pins: pwm_c {
 			mux {
 				groups = "pwm_c";
 				function = "pwm_c";
+				bias-disable;
 			};
 		};
 
@@ -537,6 +571,7 @@ pwm_d_pins: pwm_d {
 			mux {
 				groups = "pwm_d";
 				function = "pwm_d";
+				bias-disable;
 			};
 		};
 
@@ -544,6 +579,7 @@ pwm_e_pins: pwm_e {
 			mux {
 				groups = "pwm_e";
 				function = "pwm_e";
+				bias-disable;
 			};
 		};
 
@@ -551,6 +587,7 @@ pwm_f_clk_pins: pwm_f_clk {
 			mux {
 				groups = "pwm_f_clk";
 				function = "pwm_f";
+				bias-disable;
 			};
 		};
 
@@ -558,6 +595,7 @@ pwm_f_x_pins: pwm_f_x {
 			mux {
 				groups = "pwm_f_x";
 				function = "pwm_f";
+				bias-disable;
 			};
 		};
 
@@ -565,6 +603,7 @@ hdmi_hpd_pins: hdmi_hpd {
 			mux {
 				groups = "hdmi_hpd";
 				function = "hdmi_hpd";
+				bias-disable;
 			};
 		};
 
@@ -572,6 +611,7 @@ hdmi_i2c_pins: hdmi_i2c {
 			mux {
 				groups = "hdmi_sda", "hdmi_scl";
 				function = "hdmi_i2c";
+				bias-disable;
 			};
 		};
 
@@ -579,6 +619,7 @@ i2s_am_clk_pins: i2s_am_clk {
 			mux {
 				groups = "i2s_am_clk";
 				function = "i2s_out";
+				bias-disable;
 			};
 		};
 
@@ -586,6 +627,7 @@ i2s_out_ao_clk_pins: i2s_out_ao_clk {
 			mux {
 				groups = "i2s_out_ao_clk";
 				function = "i2s_out";
+				bias-disable;
 			};
 		};
 
@@ -593,6 +635,7 @@ i2s_out_lr_clk_pins: i2s_out_lr_clk {
 			mux {
 				groups = "i2s_out_lr_clk";
 				function = "i2s_out";
+				bias-disable;
 			};
 		};
 
@@ -600,12 +643,14 @@ i2s_out_ch01_pins: i2s_out_ch01 {
 			mux {
 				groups = "i2s_out_ch01";
 				function = "i2s_out";
+				bias-disable;
 			};
 		};
 		i2sout_ch23_z_pins: i2sout_ch23_z {
 			mux {
 				groups = "i2sout_ch23_z";
 				function = "i2s_out";
+				bias-disable;
 			};
 		};
 
@@ -613,6 +658,7 @@ i2sout_ch45_z_pins: i2sout_ch45_z {
 			mux {
 				groups = "i2sout_ch45_z";
 				function = "i2s_out";
+				bias-disable;
 			};
 		};
 
@@ -620,6 +666,7 @@ i2sout_ch67_z_pins: i2sout_ch67_z {
 			mux {
 				groups = "i2sout_ch67_z";
 				function = "i2s_out";
+				bias-disable;
 			};
 		};
 
@@ -627,6 +674,7 @@ spdif_out_h_pins: spdif_out_ao_h {
 			mux {
 				groups = "spdif_out_h";
 				function = "spdif_out";
+				bias-disable;
 			};
 		};
 	};

arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts

@@ -132,19 +132,15 @@ map0 {
 
 				map1 {
 					trip = <&cpu_alert1>;
-					cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>;
-				};
-
-				map2 {
-					trip = <&cpu_alert1>;
-					cooling-device =
-						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-
-				map3 {
-					trip = <&cpu_alert1>;
-					cooling-device =
-						<&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
+							 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 				};
 			};
 		};
@@ -271,6 +267,7 @@ &hdmi_tx {
 	status = "okay";
 	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
+	hdmi-supply = <&hdmi_5v>;
 };
 
 &hdmi_tx_tmds_port {