Commit f67f4ef5 authored by Scott Wood's avatar Scott Wood Committed by Benjamin Herrenschmidt

powerpc/book3e-64: use a separate TLB handler when linear map is bolted

On MMUs such as FSL where we can guarantee the entire linear mapping is
bolted, we don't need to worry about linear TLB misses.  If on top of
that we do a full table walk, we get rid of all recursive TLB faults, and
can dispense with some state saving.  This gains a few percent on
TLB-miss-heavy workloads, and around 50% on a benchmark that had a high
rate of virtual page table faults under the normal handler.

While touching the EX_TLB layout, remove EX_TLB_MMUCR0, EX_TLB_SRR0, and
EX_TLB_SRR1 as they're not used.

[BenH: Fixed build with 64K pages (wsp config)]
Signed-off-by: default avatarScott Wood <scottwood@freescale.com>
Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
parent 3d97a619
......@@ -48,30 +48,33 @@
#define EX_R14 (4 * 8)
#define EX_R15 (5 * 8)
/* The TLB miss exception uses different slots */
/*
* The TLB miss exception uses different slots.
*
* The bolted variant uses only the first six fields,
* which in combination with pgd and kernel_pgd fits in
* one 64-byte cache line.
*/
#define EX_TLB_R10 ( 0 * 8)
#define EX_TLB_R11 ( 1 * 8)
#define EX_TLB_R12 ( 2 * 8)
#define EX_TLB_R13 ( 3 * 8)
#define EX_TLB_R14 ( 4 * 8)
#define EX_TLB_R15 ( 5 * 8)
#define EX_TLB_R16 ( 6 * 8)
#define EX_TLB_CR ( 7 * 8)
#define EX_TLB_R14 ( 2 * 8)
#define EX_TLB_R15 ( 3 * 8)
#define EX_TLB_R16 ( 4 * 8)
#define EX_TLB_CR ( 5 * 8)
#define EX_TLB_R12 ( 6 * 8)
#define EX_TLB_R13 ( 7 * 8)
#define EX_TLB_DEAR ( 8 * 8) /* Level 0 and 2 only */
#define EX_TLB_ESR ( 9 * 8) /* Level 0 and 2 only */
#define EX_TLB_SRR0 (10 * 8)
#define EX_TLB_SRR1 (11 * 8)
#define EX_TLB_MMUCR0 (12 * 8) /* Level 0 */
#define EX_TLB_MAS1 (12 * 8) /* Level 0 */
#define EX_TLB_MAS2 (13 * 8) /* Level 0 */
#ifdef CONFIG_BOOK3E_MMU_TLB_STATS
#define EX_TLB_R8 (14 * 8)
#define EX_TLB_R9 (15 * 8)
#define EX_TLB_LR (16 * 8)
#define EX_TLB_SIZE (17 * 8)
#define EX_TLB_R8 (12 * 8)
#define EX_TLB_R9 (13 * 8)
#define EX_TLB_LR (14 * 8)
#define EX_TLB_SIZE (15 * 8)
#else
#define EX_TLB_SIZE (14 * 8)
#define EX_TLB_SIZE (12 * 8)
#endif
#define START_EXCEPTION(label) \
......@@ -168,6 +171,16 @@ exc_##label##_book3e:
ld r9,EX_TLB_R9(r12); \
ld r8,EX_TLB_R8(r12); \
mtlr r16;
#define TLB_MISS_PROLOG_STATS_BOLTED \
mflr r10; \
std r8,PACA_EXTLB+EX_TLB_R8(r13); \
std r9,PACA_EXTLB+EX_TLB_R9(r13); \
std r10,PACA_EXTLB+EX_TLB_LR(r13);
#define TLB_MISS_RESTORE_STATS_BOLTED \
ld r16,PACA_EXTLB+EX_TLB_LR(r13); \
ld r9,PACA_EXTLB+EX_TLB_R9(r13); \
ld r8,PACA_EXTLB+EX_TLB_R8(r13); \
mtlr r16;
#define TLB_MISS_STATS_D(name) \
addi r9,r13,MMSTAT_DSTATS+name; \
bl .tlb_stat_inc;
......@@ -183,17 +196,20 @@ exc_##label##_book3e:
61: addi r9,r13,MMSTAT_ISTATS+name; \
62: bl .tlb_stat_inc;
#define TLB_MISS_STATS_SAVE_INFO \
std r14,EX_TLB_ESR(r12); /* save ESR */ \
std r14,EX_TLB_ESR(r12); /* save ESR */
#define TLB_MISS_STATS_SAVE_INFO_BOLTED \
std r14,PACA_EXTLB+EX_TLB_ESR(r13); /* save ESR */
#else
#define TLB_MISS_PROLOG_STATS
#define TLB_MISS_RESTORE_STATS
#define TLB_MISS_PROLOG_STATS_BOLTED
#define TLB_MISS_RESTORE_STATS_BOLTED
#define TLB_MISS_STATS_D(name)
#define TLB_MISS_STATS_I(name)
#define TLB_MISS_STATS_X(name)
#define TLB_MISS_STATS_Y(name)
#define TLB_MISS_STATS_SAVE_INFO
#define TLB_MISS_STATS_SAVE_INFO_BOLTED
#endif
#define SET_IVOR(vector_number, vector_offset) \
......
......@@ -103,11 +103,12 @@ struct paca_struct {
#endif /* CONFIG_PPC_STD_MMU_64 */
#ifdef CONFIG_PPC_BOOK3E
pgd_t *pgd; /* Current PGD */
pgd_t *kernel_pgd; /* Kernel PGD */
u64 exgen[8] __attribute__((aligned(0x80)));
/* Keep pgd in the same cacheline as the start of extlb */
pgd_t *pgd __attribute__((aligned(0x80))); /* Current PGD */
pgd_t *kernel_pgd; /* Kernel PGD */
/* We can have up to 3 levels of reentrancy in the TLB miss handler */
u64 extlb[3][EX_TLB_SIZE / sizeof(u64)] __attribute__((aligned(0x80)));
u64 extlb[3][EX_TLB_SIZE / sizeof(u64)];
u64 exmc[8]; /* used for machine checks */
u64 excrit[8]; /* used for crit interrupts */
u64 exdbg[8]; /* used for debug interrupts */
......
......@@ -30,6 +30,212 @@
#define VPTE_PGD_SHIFT (VPTE_PUD_SHIFT + PUD_INDEX_SIZE)
#define VPTE_INDEX_SIZE (VPTE_PGD_SHIFT + PGD_INDEX_SIZE)
/**********************************************************************
* *
* TLB miss handling for Book3E with a bolted linear mapping *
* No virtual page table, no nested TLB misses *
* *
**********************************************************************/
.macro tlb_prolog_bolted addr
mtspr SPRN_SPRG_TLB_SCRATCH,r13
mfspr r13,SPRN_SPRG_PACA
std r10,PACA_EXTLB+EX_TLB_R10(r13)
mfcr r10
std r11,PACA_EXTLB+EX_TLB_R11(r13)
std r16,PACA_EXTLB+EX_TLB_R16(r13)
mfspr r16,\addr /* get faulting address */
std r14,PACA_EXTLB+EX_TLB_R14(r13)
ld r14,PACAPGD(r13)
std r15,PACA_EXTLB+EX_TLB_R15(r13)
std r10,PACA_EXTLB+EX_TLB_CR(r13)
TLB_MISS_PROLOG_STATS_BOLTED
.endm
.macro tlb_epilog_bolted
ld r14,PACA_EXTLB+EX_TLB_CR(r13)
ld r10,PACA_EXTLB+EX_TLB_R10(r13)
ld r11,PACA_EXTLB+EX_TLB_R11(r13)
mtcr r14
ld r14,PACA_EXTLB+EX_TLB_R14(r13)
ld r15,PACA_EXTLB+EX_TLB_R15(r13)
TLB_MISS_RESTORE_STATS_BOLTED
ld r16,PACA_EXTLB+EX_TLB_R16(r13)
mfspr r13,SPRN_SPRG_TLB_SCRATCH
.endm
/* Data TLB miss */
START_EXCEPTION(data_tlb_miss_bolted)
tlb_prolog_bolted SPRN_DEAR
/* We need _PAGE_PRESENT and _PAGE_ACCESSED set */
/* We do the user/kernel test for the PID here along with the RW test
*/
/* We pre-test some combination of permissions to avoid double
* faults:
*
* We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE
* ESR_ST is 0x00800000
* _PAGE_BAP_SW is 0x00000010
* So the shift is >> 19. This tests for supervisor writeability.
* If the page happens to be supervisor writeable and not user
* writeable, we will take a new fault later, but that should be
* a rare enough case.
*
* We also move ESR_ST in _PAGE_DIRTY position
* _PAGE_DIRTY is 0x00001000 so the shift is >> 11
*
* MAS1 is preset for all we need except for TID that needs to
* be cleared for kernel translations
*/
mfspr r11,SPRN_ESR
srdi r15,r16,60 /* get region */
rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
bne- dtlb_miss_fault_bolted
rlwinm r10,r11,32-19,27,27
rlwimi r10,r11,32-16,19,19
cmpwi r15,0
ori r10,r10,_PAGE_PRESENT
oris r11,r10,_PAGE_ACCESSED@h
TLB_MISS_STATS_SAVE_INFO_BOLTED
bne tlb_miss_kernel_bolted
tlb_miss_common_bolted:
/*
* This is the guts of the TLB miss handler for bolted-linear.
* We are entered with:
*
* r16 = faulting address
* r15 = crap (free to use)
* r14 = page table base
* r13 = PACA
* r11 = PTE permission mask
* r10 = crap (free to use)
*/
rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3
cmpldi cr0,r14,0
clrrdi r15,r15,3
beq tlb_miss_fault_bolted
BEGIN_MMU_FTR_SECTION
/* Set the TLB reservation and search for existing entry. Then load
* the entry.
*/
PPC_TLBSRX_DOT(0,r16)
ldx r14,r14,r15
beq normal_tlb_miss_done
MMU_FTR_SECTION_ELSE
ldx r14,r14,r15
ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
#ifndef CONFIG_PPC_64K_PAGES
rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
clrrdi r15,r15,3
cmpldi cr0,r14,0
beq tlb_miss_fault_bolted
ldx r14,r14,r15
#endif /* CONFIG_PPC_64K_PAGES */
rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
clrrdi r15,r15,3
cmpldi cr0,r14,0
beq tlb_miss_fault_bolted
ldx r14,r14,r15
rldicl r15,r16,64-PAGE_SHIFT+3,64-PTE_INDEX_SIZE-3
clrrdi r15,r15,3
cmpldi cr0,r14,0
beq tlb_miss_fault_bolted
ldx r14,r14,r15
/* Check if required permissions are met */
andc. r15,r11,r14
rldicr r15,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
bne- tlb_miss_fault_bolted
/* Now we build the MAS:
*
* MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG
* MAS 1 : Almost fully setup
* - PID already updated by caller if necessary
* - TSIZE need change if !base page size, not
* yet implemented for now
* MAS 2 : Defaults not useful, need to be redone
* MAS 3+7 : Needs to be done
*/
clrrdi r11,r16,12 /* Clear low crap in EA */
clrldi r15,r15,12 /* Clear crap at the top */
rlwimi r11,r14,32-19,27,31 /* Insert WIMGE */
rlwimi r15,r14,32-8,22,25 /* Move in U bits */
mtspr SPRN_MAS2,r11
andi. r11,r14,_PAGE_DIRTY
rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */
/* Mask out SW and UW if !DIRTY (XXX optimize this !) */
bne 1f
li r11,MAS3_SW|MAS3_UW
andc r15,r15,r11
1:
mtspr SPRN_MAS7_MAS3,r15
tlbwe
TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
tlb_epilog_bolted
rfi
itlb_miss_kernel_bolted:
li r11,_PAGE_PRESENT|_PAGE_BAP_SX /* Base perm */
oris r11,r11,_PAGE_ACCESSED@h
tlb_miss_kernel_bolted:
mfspr r10,SPRN_MAS1
ld r14,PACA_KERNELPGD(r13)
cmpldi cr0,r15,8 /* Check for vmalloc region */
rlwinm r10,r10,0,16,1 /* Clear TID */
mtspr SPRN_MAS1,r10
beq+ tlb_miss_common_bolted
tlb_miss_fault_bolted:
/* We need to check if it was an instruction miss */
andi. r10,r11,_PAGE_EXEC|_PAGE_BAP_SX
bne itlb_miss_fault_bolted
dtlb_miss_fault_bolted:
TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
tlb_epilog_bolted
b exc_data_storage_book3e
itlb_miss_fault_bolted:
TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
tlb_epilog_bolted
b exc_instruction_storage_book3e
/* Instruction TLB miss */
START_EXCEPTION(instruction_tlb_miss_bolted)
tlb_prolog_bolted SPRN_SRR0
rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
srdi r15,r16,60 /* get region */
TLB_MISS_STATS_SAVE_INFO_BOLTED
bne- itlb_miss_fault_bolted
li r11,_PAGE_PRESENT|_PAGE_EXEC /* Base perm */
/* We do the user/kernel test for the PID here along with the RW test
*/
cmpldi cr0,r15,0 /* Check for user region */
oris r11,r11,_PAGE_ACCESSED@h
beq tlb_miss_common_bolted
b itlb_miss_kernel_bolted
/**********************************************************************
* *
......
......@@ -443,14 +443,27 @@ static void setup_page_sizes(void)
}
}
static void setup_mmu_htw(void)
static void __patch_exception(int exc, unsigned long addr)
{
extern unsigned int interrupt_base_book3e;
extern unsigned int exc_data_tlb_miss_htw_book3e;
extern unsigned int exc_instruction_tlb_miss_htw_book3e;
unsigned int *ibase = &interrupt_base_book3e;
/* Our exceptions vectors start with a NOP and -then- a branch
* to deal with single stepping from userspace which stops on
* the second instruction. Thus we need to patch the second
* instruction of the exception, not the first one
*/
patch_branch(ibase + (exc / 4) + 1, addr, 0);
}
#define patch_exception(exc, name) do { \
extern unsigned int name; \
__patch_exception((exc), (unsigned long)&name); \
} while (0)
static void setup_mmu_htw(void)
{
/* Check if HW tablewalk is present, and if yes, enable it by:
*
* - patching the TLB miss handlers to branch to the
......@@ -462,15 +475,8 @@ static void setup_mmu_htw(void)
if ((tlb0cfg & TLBnCFG_IND) &&
(tlb0cfg & TLBnCFG_PT)) {
/* Our exceptions vectors start with a NOP and -then- a branch
* to deal with single stepping from userspace which stops on
* the second instruction. Thus we need to patch the second
* instruction of the exception, not the first one
*/
patch_branch(ibase + (0x1c0 / 4) + 1,
(unsigned long)&exc_data_tlb_miss_htw_book3e, 0);
patch_branch(ibase + (0x1e0 / 4) + 1,
(unsigned long)&exc_instruction_tlb_miss_htw_book3e, 0);
patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e);
patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e);
book3e_htw_enabled = 1;
}
pr_info("MMU: Book3E HW tablewalk %s\n",
......@@ -549,6 +555,9 @@ static void __early_init_mmu(int boot_cpu)
/* limit memory so we dont have linear faults */
memblock_enforce_memory_limit(linear_map_top);
memblock_analyze();
patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
patch_exception(0x1e0, exc_instruction_tlb_miss_bolted_book3e);
}
#endif
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment