Merge AT91, EP93xx, General devel, PXA, S3C, V6+ and Xscale trees

Documentation/arm/Samsung-S3C24XX/DMA.txt

+			S3C2410 DMA
+			===========
+
+Introduction
+------------
+
+   The kernel provides an interface to manage DMA transfers
+   using the DMA channels in the cpu, so that the central
+   duty of managing channel mappings, and programming the
+   channel generators is in one place.
+
+
+DMA Channel Ordering
+--------------------
+
+   Many of the range do not have connections for the DMA
+   channels to all sources, which means that some devices
+   have a restricted number of channels that can be used.
+
+   To allow flexibilty for each cpu type and board, the
+   dma code can be given an dma ordering structure which
+   allows the order of channel search to be specified, as
+   well as allowing the prohibition of certain claims.
+
+   struct s3c24xx_dma_order has a list of channels, and
+   each channel within has a slot for a list of dma
+   channel numbers. The slots are searched in order, for
+   the presence of a dma channel number with DMA_CH_VALID
+   orred in.
+
+   If the order has the flag DMA_CH_NEVER set, then after
+   checking the channel list, the system will return no
+   found channel, thus denying the request.
+
+   A board support file can call s3c24xx_dma_order_set()
+   to register an complete ordering set. The routine will
+   copy the data, so the original can be discared with
+   __initdata.
+
+
+Authour
+-------
+
+Ben Dooks,
+Copyright (c) 2007 Ben Dooks, Simtec Electronics
+Licensed under the GPL v2

Documentation/arm/Samsung-S3C24XX/Overview.txt

@@ -8,13 +8,10 @@ Introduction
 
   The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported
   by the 's3c2410' architecture of ARM Linux. Currently the S3C2410,
-  S3C2440 and S3C2442 devices are supported.
+  S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported.
 
   Support for the S3C2400 series is in progress.
 
-  Support for the S3C2412 and S3C2413 CPUs is being merged.
-
-
 Configuration
 -------------
 
@@ -26,6 +23,22 @@ Configuration
   please check the machine specific documentation.
 
 
+Layout
+------
+
+  The core support files are located in the platform code contained in
+  arch/arm/plat-s3c24xx with headers in include/asm-arm/plat-s3c24xx.
+  This directory should be kept to items shared between the platform
+  code (arch/arm/plat-s3c24xx) and the arch/arm/mach-s3c24* code.
+
+  Each cpu has a directory with the support files for it, and the
+  machines that carry the device. For example S3C2410 is contained
+  in arch/arm/mach-s3c2410 and S3C2440 in arch/arm/mach-s3c2440
+
+  Register, kernel and platform data definitions are held in the
+  include/asm-arm/arch-s3c2410 directory.
+
+
 Machines
 --------
 

arch/arm/Kconfig

@@ -280,6 +280,7 @@ config ARCH_PXA
 	bool "PXA2xx-based"
 	depends on MMU
 	select ARCH_MTD_XIP
+	select GENERIC_TIME
 	help
 	  Support for Intel's PXA2XX processor line.
 
@@ -303,7 +304,7 @@ config ARCH_SA1100
 	  Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
-	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
+	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -363,7 +364,16 @@ source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
+source "arch/arm/plat-s3c24xx/Kconfig"
+
+if ARCH_S3C2410
+source "arch/arm/mach-s3c2400/Kconfig"
 source "arch/arm/mach-s3c2410/Kconfig"
+source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2440/Kconfig"
+source "arch/arm/mach-s3c2442/Kconfig"
+source "arch/arm/mach-s3c2443/Kconfig"
+endif
 
 source "arch/arm/mach-lh7a40x/Kconfig"
 
@@ -377,7 +387,7 @@ source "arch/arm/mach-aaec2000/Kconfig"
 
 source "arch/arm/mach-realview/Kconfig"
 
-source "arch/arm/mach-at91rm9200/Kconfig"
+source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-netx/Kconfig"
 

arch/arm/Makefile

@@ -124,7 +124,7 @@ endif
  machine-$(CONFIG_ARCH_H720X)	   := h720x
  machine-$(CONFIG_ARCH_AAEC2000)   := aaec2000
  machine-$(CONFIG_ARCH_REALVIEW)   := realview
- machine-$(CONFIG_ARCH_AT91)       := at91rm9200
+ machine-$(CONFIG_ARCH_AT91)       := at91
  machine-$(CONFIG_ARCH_EP93XX)     := ep93xx
  machine-$(CONFIG_ARCH_PNX4008)    := pnx4008
  machine-$(CONFIG_ARCH_NETX)       := netx
@@ -149,7 +149,7 @@ MACHINE  := arch/arm/mach-$(machine-y)/
 else
 MACHINE  :=
 endif
-  
+
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # Do we have FASTFPE?
@@ -161,6 +161,11 @@ endif
 # If we have a machine-specific directory, then include it in the build.
 core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
 core-y				+= $(MACHINE)
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2400/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2412/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2440/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2442/
+core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2443/
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
@@ -168,6 +173,7 @@ core-$(CONFIG_VFP)		+= arch/arm/vfp/
 # If we have a common platform directory, then include it in the build.
 core-$(CONFIG_PLAT_IOP)		+= arch/arm/plat-iop/
 core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
+core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
 
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 drivers-$(CONFIG_ARCH_CLPS7500)	+= drivers/acorn/char/

arch/arm/common/dmabounce.c

@@ -258,10 +258,14 @@ map_single(struct device *dev, void *ptr, size_t size,
 		ptr = buf->safe;
 
 		dma_addr = buf->safe_dma_addr;
+	} else {
+		/*
+		 * We don't need to sync the DMA buffer since
+		 * it was allocated via the coherent allocators.
+		 */
+		consistent_sync(ptr, size, dir);
 	}
 
-	consistent_sync(ptr, size, dir);
-
 	return dma_addr;
 }
 
@@ -294,12 +298,12 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		DO_STATS ( device_info->bounce_count++ );
 
 		if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
-			unsigned long ptr;
+			void *ptr = buf->ptr;
 
 			dev_dbg(dev,
 				"%s: copy back safe %p to unsafe %p size %d\n",
-				__func__, buf->safe, buf->ptr, size);
-			memcpy(buf->ptr, buf->safe, size);
+				__func__, buf->safe, ptr, size);
+			memcpy(ptr, buf->safe, size);
 
 			/*
 			 * DMA buffers must have the same cache properties
@@ -309,8 +313,8 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 			 * bidirectional case because we know the cache
 			 * lines will be coherent with the data written.
 			 */
-			ptr = (unsigned long)buf->ptr;
 			dmac_clean_range(ptr, ptr + size);
+			outer_clean_range(__pa(ptr), __pa(ptr) + size);
 		}
 		free_safe_buffer(device_info, buf);
 	}
@@ -374,7 +378,10 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 		default:
 			BUG();
 		}
-		consistent_sync(buf->safe, size, dir);
+		/*
+		 * No need to sync the safe buffer - it was allocated
+		 * via the coherent allocators.
+		 */
 	} else {
 		consistent_sync(dma_to_virt(dev, dma_addr), size, dir);
 	}

arch/arm/common/gic.c

@@ -14,7 +14,9 @@
  *
  * o There is one CPU Interface per CPU, which sends interrupts sent
  *   by the Distributor, and interrupts generated locally, to the
- *   associated CPU.
+ *   associated CPU. The base address of the CPU interface is usually
+ *   aliased so that the same address points to different chips depending
+ *   on the CPU it is accessed from.
  *
  * Note that IRQs 0-31 are special - they are local to each CPU.
  * As such, the enable set/clear, pending set/clear and active bit
@@ -31,10 +33,38 @@
 #include <asm/mach/irq.h>
 #include <asm/hardware/gic.h>
 
-static void __iomem *gic_dist_base;
-static void __iomem *gic_cpu_base;
 static DEFINE_SPINLOCK(irq_controller_lock);
 
+struct gic_chip_data {
+	unsigned int irq_offset;
+	void __iomem *dist_base;
+	void __iomem *cpu_base;
+};
+
+#ifndef MAX_GIC_NR
+#define MAX_GIC_NR	1
+#endif
+
+static struct gic_chip_data gic_data[MAX_GIC_NR];
+
+static inline void __iomem *gic_dist_base(unsigned int irq)
+{
+	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+	return gic_data->dist_base;
+}
+
+static inline void __iomem *gic_cpu_base(unsigned int irq)
+{
+	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+	return gic_data->cpu_base;
+}
+
+static inline unsigned int gic_irq(unsigned int irq)
+{
+	struct gic_chip_data *gic_data = get_irq_chip_data(irq);
+	return irq - gic_data->irq_offset;
+}
+
 /*
  * Routines to acknowledge, disable and enable interrupts
  *
@@ -55,8 +85,8 @@ static void gic_ack_irq(unsigned int irq)
 	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
-	writel(irq, gic_cpu_base + GIC_CPU_EOI);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
+	writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
 	spin_unlock(&irq_controller_lock);
 }
 
@@ -65,7 +95,7 @@ static void gic_mask_irq(unsigned int irq)
 	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base + GIC_DIST_ENABLE_CLEAR + (irq / 32) * 4);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }
 
@@ -74,14 +104,14 @@ static void gic_unmask_irq(unsigned int irq)
 	u32 mask = 1 << (irq % 32);
 
 	spin_lock(&irq_controller_lock);
-	writel(mask, gic_dist_base + GIC_DIST_ENABLE_SET + (irq / 32) * 4);
+	writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_SET + (gic_irq(irq) / 32) * 4);
 	spin_unlock(&irq_controller_lock);
 }
 
 #ifdef CONFIG_SMP
 static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
 {
-	void __iomem *reg = gic_dist_base + GIC_DIST_TARGET + (irq & ~3);
+	void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
 	unsigned int shift = (irq % 4) * 8;
 	unsigned int cpu = first_cpu(mask_val);
 	u32 val;
@@ -95,6 +125,37 @@ static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
 }
 #endif
 
+static void fastcall gic_handle_cascade_irq(unsigned int irq,
+					    struct irq_desc *desc)
+{
+	struct gic_chip_data *chip_data = get_irq_data(irq);
+	struct irq_chip *chip = get_irq_chip(irq);
+	unsigned int cascade_irq;
+	unsigned long status;
+
+	/* primary controller ack'ing */
+	chip->ack(irq);
+
+	spin_lock(&irq_controller_lock);
+	status = readl(chip_data->cpu_base + GIC_CPU_INTACK);
+	spin_unlock(&irq_controller_lock);
+
+	cascade_irq = (status & 0x3ff);
+	if (cascade_irq > 1020)
+		goto out;
+	if (cascade_irq < 32 || cascade_irq >= NR_IRQS) {
+		do_bad_IRQ(cascade_irq, desc);
+		goto out;
+	}
+
+	cascade_irq += chip_data->irq_offset;
+	generic_handle_irq(cascade_irq);
+
+ out:
+	/* primary controller unmasking */
+	chip->unmask(irq);
+}
+
 static struct irq_chip gic_chip = {
 	.name		= "GIC",
 	.ack		= gic_ack_irq,
@@ -105,15 +166,29 @@ static struct irq_chip gic_chip = {
 #endif
 };
 
-void __init gic_dist_init(void __iomem *base)
+void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
+{
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+	if (set_irq_data(irq, &gic_data[gic_nr]) != 0)
+		BUG();
+	set_irq_chained_handler(irq, gic_handle_cascade_irq);
+}
+
+void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
+			  unsigned int irq_start)
 {
 	unsigned int max_irq, i;
 	u32 cpumask = 1 << smp_processor_id();
 
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+
 	cpumask |= cpumask << 8;
 	cpumask |= cpumask << 16;
 
-	gic_dist_base = base;
+	gic_data[gic_nr].dist_base = base;
+	gic_data[gic_nr].irq_offset = (irq_start - 1) & ~31;
 
 	writel(0, base + GIC_DIST_CTRL);
 
@@ -158,8 +233,9 @@ void __init gic_dist_init(void __iomem *base)
 	/*
 	 * Setup the Linux IRQ subsystem.
 	 */
-	for (i = 29; i < max_irq; i++) {
+	for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
 		set_irq_chip(i, &gic_chip);
+		set_irq_chip_data(i, &gic_data[gic_nr]);
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}
@@ -167,9 +243,13 @@ void __init gic_dist_init(void __iomem *base)
 	writel(1, base + GIC_DIST_CTRL);
 }
 
-void __cpuinit gic_cpu_init(void __iomem *base)
+void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 {
-	gic_cpu_base = base;
+	if (gic_nr >= MAX_GIC_NR)
+		BUG();
+
+	gic_data[gic_nr].cpu_base = base;
+
 	writel(0xf0, base + GIC_CPU_PRIMASK);
 	writel(1, base + GIC_CPU_CTRL);
 }
@@ -179,6 +259,7 @@ void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
 {
 	unsigned long map = *cpus_addr(cpumask);
 
-	writel(map << 16 | irq, gic_dist_base + GIC_DIST_SOFTINT);
+	/* this always happens on GIC0 */
+	writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
 }
 #endif

arch/arm/configs/ateb9200_defconfig

@@ -1066,7 +1066,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #

arch/arm/configs/csb337_defconfig

@@ -355,10 +355,12 @@ CONFIG_MTD_CFI_UTIL=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB337=y
 
 #
 # Self-contained MTD device drivers
@@ -986,7 +988,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_TEST is not set
 # CONFIG_RTC_DRV_V3020 is not set
 

arch/arm/configs/csb637_defconfig

@@ -355,10 +355,12 @@ CONFIG_MTD_CFI_UTIL=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_PLATRAM is not set
-CONFIG_MTD_CSB637=y
 
 #
 # Self-contained MTD device drivers

arch/arm/configs/kafa_defconfig

@@ -718,7 +718,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
-CONFIG_RTC_DRV_AT91=y
+CONFIG_RTC_DRV_AT91RM9200=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #

arch/arm/configs/s3c2410_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc4
-# Fri Nov  3 17:41:31 2006
+# Linux kernel version: 2.6.20
+# Thu Feb 15 11:26:24 2007
 #
 CONFIG_ARM=y
 # CONFIG_GENERIC_TIME is not set
@@ -11,6 +11,8 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -37,13 +39,14 @@ CONFIG_SYSVIPC=y
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -76,7 +79,9 @@ CONFIG_KMOD=y
 # Block layer
 #
 CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -110,6 +115,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
@@ -122,54 +128,73 @@ CONFIG_ARCH_S3C2410=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
+CONFIG_PLAT_S3C24XX=y
+CONFIG_CPU_S3C244X=y
+CONFIG_PM_SIMTEC=y
+# CONFIG_S3C2410_BOOT_WATCHDOG is not set
+# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
+# CONFIG_S3C2410_PM_DEBUG is not set
+# CONFIG_S3C2410_PM_CHECK is not set
+CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_S3C2410_DMA=y
+# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_MACH_SMDK=y
 
 #
-# S3C24XX Implementations
+# S3C2400 Machines
 #
-# CONFIG_MACH_AML_M5900 is not set
-CONFIG_MACH_ANUBIS=y
-CONFIG_MACH_OSIRIS=y
-CONFIG_ARCH_BAST=y
-CONFIG_BAST_PC104_IRQ=y
+CONFIG_CPU_S3C2410=y
+CONFIG_CPU_S3C2410_DMA=y
+CONFIG_S3C2410_PM=y
+CONFIG_S3C2410_GPIO=y
+CONFIG_S3C2410_CLOCK=y
+
+#
+# S3C2410 Machines
+#
+CONFIG_ARCH_SMDK2410=y
 CONFIG_ARCH_H1940=y
+CONFIG_PM_H1940=y
 CONFIG_MACH_N30=y
-CONFIG_MACH_SMDK=y
-CONFIG_ARCH_SMDK2410=y
-CONFIG_ARCH_S3C2440=y
-CONFIG_SMDK2440_CPU2440=y
-CONFIG_SMDK2440_CPU2442=y
-CONFIG_MACH_S3C2413=y
-CONFIG_MACH_SMDK2413=y
-CONFIG_MACH_VR1000=y
-CONFIG_MACH_RX3715=y
+CONFIG_ARCH_BAST=y
 CONFIG_MACH_OTOM=y
-CONFIG_MACH_NEXCODER_2440=y
-CONFIG_MACH_VSTMS=y
-CONFIG_S3C2410_CLOCK=y
-CONFIG_S3C2410_PM=y
-CONFIG_CPU_S3C2410_DMA=y
-CONFIG_CPU_S3C2410=y
-CONFIG_S3C2412_PM=y
+CONFIG_MACH_AML_M5900=y
+CONFIG_BAST_PC104_IRQ=y
+CONFIG_MACH_VR1000=y
 CONFIG_CPU_S3C2412=y
-CONFIG_CPU_S3C244X=y
+CONFIG_S3C2412_DMA=y
+CONFIG_S3C2412_PM=y
+
+#
+# S3C2412 Machines
+#
+CONFIG_MACH_SMDK2413=y
+CONFIG_MACH_S3C2413=y
+CONFIG_MACH_VSTMS=y
 CONFIG_CPU_S3C2440=y
+CONFIG_S3C2440_DMA=y
+
+#
+# S3C2440 Machines
+#
+CONFIG_MACH_ANUBIS=y
+CONFIG_MACH_OSIRIS=y
+CONFIG_MACH_RX3715=y
+CONFIG_ARCH_S3C2440=y
+CONFIG_MACH_NEXCODER_2440=y
+CONFIG_SMDK2440_CPU2440=y
 CONFIG_CPU_S3C2442=y
 
 #
-# S3C2410 Boot
+# S3C2442 Machines
 #
-# CONFIG_S3C2410_BOOT_WATCHDOG is not set
-# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
+CONFIG_SMDK2440_CPU2442=y
+CONFIG_CPU_S3C2443=y
 
 #
-# S3C2410 Setup
+# S3C2443 Machines
 #
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C2410_PM_DEBUG is not set
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_PM_SIMTEC=y
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
+CONFIG_MACH_SMDK2443=y
 
 #
 # Processor Type
@@ -196,6 +221,7 @@ CONFIG_CPU_CP15_MMU=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
 
 #
 # Bus support
@@ -303,6 +329,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -385,6 +412,7 @@ CONFIG_MTD_CMDLINE_PARTS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -530,6 +558,11 @@ CONFIG_BLK_DEV_IDE_BAST=y
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_NETLINK is not set
 
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
 #
 # Multi-device support (RAID and LVM)
 #
@@ -682,7 +715,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
@@ -700,13 +733,14 @@ CONFIG_SERIAL_8250_NR_UARTS=8
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
 # CONFIG_SERIAL_8250_FOURPORT is not set
 # CONFIG_SERIAL_8250_ACCENT is not set
 # CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
 # CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
@@ -755,10 +789,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -863,6 +893,7 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
@@ -870,6 +901,7 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -951,6 +983,11 @@ CONFIG_FONT_8x16=y
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=y
+
 #
 # USB support
 #
@@ -1028,6 +1065,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1179,9 +1217,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=y
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -1191,7 +1226,7 @@ CONFIG_JFFS2_FS_WRITEBUFFER=y
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
@@ -1284,6 +1319,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -1296,6 +1336,8 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1311,12 +1353,10 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
@@ -1339,6 +1379,7 @@ CONFIG_DEBUG_S3C2410_UART=0
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1346,3 +1387,4 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

arch/arm/kernel/crunch.c

@@ -75,6 +75,7 @@ static struct notifier_block crunch_notifier_block = {
 static int __init crunch_init(void)
 {
 	thread_register_notifier(&crunch_notifier_block);
+	elf_hwcap |= HWCAP_CRUNCH;
 
 	return 0;
 }

arch/arm/kernel/setup.c

@@ -88,6 +88,9 @@ struct cpu_user_fns cpu_user;
 #ifdef MULTI_CACHE
 struct cpu_cache_fns cpu_cache;
 #endif
+#ifdef CONFIG_OUTER_CACHE
+struct outer_cache_fns outer_cache;
+#endif
 
 struct stack {
 	u32 irq[3];

arch/arm/mach-at91rm9200/Kconfig → arch/arm/mach-at91/Kconfig

@@ -9,11 +9,14 @@ config ARCH_AT91RM9200
 	bool "AT91RM9200"
 
 config ARCH_AT91SAM9260
-	bool "AT91SAM9260"
+	bool "AT91SAM9260 or AT91SAM9XE"
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 
+config ARCH_AT91SAM9263
+	bool "AT91SAM9263"
+
 endchoice
 
 # ----------------------------------------------------------
@@ -90,13 +93,22 @@ endif
 
 if ARCH_AT91SAM9260
 
-comment "AT91SAM9260 Board Type"
+comment "AT91SAM9260 Variants"
+
+config ARCH_AT91SAM9260_SAM9XE
+	bool "AT91SAM9XE"
+	depends on ARCH_AT91SAM9260
+	help
+	  Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
+	  They are basicaly AT91SAM9260s with various sizes of embedded Flash.
+
+comment "AT91SAM9260 / AT91SAM9XE Board Type"
 
 config MACH_AT91SAM9260EK
-	bool "Atmel AT91SAM9260-EK Evaluation Kit"
+	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
 	depends on ARCH_AT91SAM9260
 	help
-	  Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit.
+	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 
 endif
@@ -118,17 +130,32 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9263
+
+comment "AT91SAM9263 Board Type"
+
+config MACH_AT91SAM9263EK
+	bool "Atmel AT91SAM9263-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9263
+	help
+	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
+
+endif
+
+# ----------------------------------------------------------
+
 comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_AT91_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).

arch/arm/mach-at91rm9200/Makefile → arch/arm/mach-at91/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
@@ -31,6 +32,9 @@ obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
 
+# AT91SAM9263 board-specific support
+obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
+
 # LEDs support
 led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o
 led-$(CONFIG_MACH_AT91RM9200EK)	+= leds.o

arch/arm/mach-at91rm9200/at91rm9200.c → arch/arm/mach-at91/at91rm9200.c

 /*
- * arch/arm/mach-at91rm9200/at91rm9200.c
+ * arch/arm/mach-at91/at91rm9200.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -117,6 +117,36 @@ static struct clk pioD_clk = {
 	.pmc_mask	= 1 << AT91RM9200_ID_PIOD,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc3_clk = {
+	.name		= "tc3_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+	.name		= "tc4_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+	.name		= "tc5_clk",
+	.pmc_mask	= 1 << AT91RM9200_ID_TC5,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
@@ -132,7 +162,12 @@ static struct clk *periph_clocks[] __initdata = {
 	&twi_clk,
 	&spi_clk,
 	// ssc 0 .. ssc2
-	// tc0 .. tc5
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
+	&tc3_clk,
+	&tc4_clk,
+	&tc5_clk,
 	&ohci_clk,
 	&ether_clk,
 	// irq0 .. irq6

arch/arm/mach-at91rm9200/at91rm9200_devices.c → arch/arm/mach-at91/at91rm9200_devices.c

 /*
- * arch/arm/mach-at91rm9200/at91rm9200_devices.c
+ * arch/arm/mach-at91/at91rm9200_devices.c
  *
  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
  *  Copyright (C) 2005 David Brownell
@@ -315,7 +315,7 @@ static struct platform_device at91rm9200_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -361,7 +361,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	platform_device_register(&at91rm9200_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
@@ -594,6 +594,10 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }

arch/arm/mach-at91rm9200/at91rm9200_time.c → arch/arm/mach-at91/at91rm9200_time.c

 /*
- * linux/arch/arm/mach-at91rm9200/at91rm9200_time.c
+ * linux/arch/arm/mach-at91/at91rm9200_time.c
  *
  *  Copyright (C) 2003 SAN People
  *  Copyright (C) 2003 ATMEL

arch/arm/mach-at91rm9200/at91sam9260.c → arch/arm/mach-at91/at91sam9260.c

 /*
- * arch/arm/mach-at91rm9200/at91sam9260.c
+ * arch/arm/mach-at91/at91sam9260.c
  *
  *  Copyright (C) 2006 SAN People
  *
@@ -14,6 +14,7 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <asm/arch/cpu.h>
 #include <asm/arch/at91sam9260.h>
 #include <asm/arch/at91_pmc.h>
 #include <asm/arch/at91_rstc.h>
@@ -27,7 +28,11 @@ static struct map_desc at91sam9260_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
-	}, {
+	}
+};
+
+static struct map_desc at91sam9260_sram_desc[] __initdata = {
+	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM0_BASE),
 		.length		= AT91SAM9260_SRAM0_SIZE,
@@ -37,7 +42,14 @@ static struct map_desc at91sam9260_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91SAM9260_SRAM1_BASE),
 		.length		= AT91SAM9260_SRAM1_SIZE,
 		.type		= MT_DEVICE,
-	},
+	}
+};
+
+static struct map_desc at91sam9xe_sram_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(AT91SAM9XE_SRAM_BASE),
+		.type		= MT_DEVICE,
+	}
 };
 
 /* --------------------------------------------------------------------
@@ -107,13 +119,28 @@ static struct clk spi1_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_UHP,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
-static struct clk ether_clk = {
-	.name		= "ether_clk",
+static struct clk macb_clk = {
+	.name		= "macb_clk",
 	.pmc_mask	= 1 << AT91SAM9260_ID_EMAC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
@@ -137,6 +164,21 @@ static struct clk usart5_clk = {
 	.pmc_mask	= 1 << AT91SAM9260_ID_US5,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc3_clk = {
+	.name		= "tc3_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc4_clk = {
+	.name		= "tc4_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC4,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc5_clk = {
+	.name		= "tc5_clk",
+	.pmc_mask	= 1 << AT91SAM9260_ID_TC5,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 
 static struct clk *periph_clocks[] __initdata = {
 	&pioA_clk,
@@ -152,14 +194,18 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi0_clk,
 	&spi1_clk,
 	// ssc
-	// tc0 .. tc2
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
 	&ohci_clk,
-	&ether_clk,
+	&macb_clk,
 	&isi_clk,
 	&usart3_clk,
 	&usart4_clk,
 	&usart5_clk,
-	// tc3 .. tc5
+	&tc3_clk,
+	&tc4_clk,
+	&tc5_clk,
 	// irq0 .. irq2
 };
 
@@ -213,7 +259,7 @@ static struct at91_gpio_bank at91sam9260_gpio[] = {
 
 static void at91sam9260_reset(void)
 {
-	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
 
@@ -221,11 +267,37 @@ static void at91sam9260_reset(void)
  *  AT91SAM9260 processor initialization
  * -------------------------------------------------------------------- */
 
+static void __init at91sam9xe_initialize(void)
+{
+	unsigned long cidr, sram_size;
+
+	cidr = at91_sys_read(AT91_DBGU_CIDR);
+
+	switch (cidr & AT91_CIDR_SRAMSIZ) {
+		case AT91_CIDR_SRAMSIZ_32K:
+			sram_size = 2 * SZ_16K;
+			break;
+		case AT91_CIDR_SRAMSIZ_16K:
+		default:
+			sram_size = SZ_16K;
+	}
+
+	at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
+	at91sam9xe_sram_desc->length = sram_size;
+
+	iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc));
+}
+
 void __init at91sam9260_initialize(unsigned long main_clock)
 {
 	/* Map peripherals */
 	iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc));
 
+	if (cpu_is_at91sam9xe())
+		at91sam9xe_initialize();
+	else
+		iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc));
+
 	at91_arch_reset = at91sam9260_reset;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
 			| (1 << AT91SAM9260_ID_IRQ2);

arch/arm/mach-at91rm9200/at91sam9260_devices.c → arch/arm/mach-at91/at91sam9260_devices.c

 /*
- * arch/arm/mach-at91rm9200/at91sam9260_devices.c
+ * arch/arm/mach-at91/at91sam9260_devices.c
  *
  *  Copyright (C) 2006 Atmel
  *
@@ -128,7 +128,7 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {}
 
 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
 static u64 eth_dmamask = 0xffffffffUL;
-static struct eth_platform_data eth_data;
+static struct at91_eth_data eth_data;
 
 static struct resource eth_resources[] = {
 	[0] = {
@@ -155,7 +155,7 @@ static struct platform_device at91sam9260_eth_device = {
 	.num_resources	= ARRAY_SIZE(eth_resources),
 };
 
-void __init at91_add_device_eth(struct eth_platform_data *data)
+void __init at91_add_device_eth(struct at91_eth_data *data)
 {
 	if (!data)
 		return;
@@ -192,7 +192,7 @@ void __init at91_add_device_eth(struct eth_platform_data *data)
 	platform_device_register(&at91sam9260_eth_device);
 }
 #else
-void __init at91_add_device_eth(struct eth_platform_data *data) {}
+void __init at91_add_device_eth(struct at91_eth_data *data) {}
 #endif
 
 
@@ -229,7 +229,7 @@ static struct platform_device at91sam9260_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -275,7 +275,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	platform_device_register(&at91sam9260_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
@@ -515,6 +515,10 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }

arch/arm/mach-at91rm9200/at91sam9261.c → arch/arm/mach-at91/at91sam9261.c

 /*
- * arch/arm/mach-at91rm9200/at91sam9261.c
+ * arch/arm/mach-at91/at91sam9261.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -97,6 +97,21 @@ static struct clk spi1_clk = {
 	.pmc_mask	= 1 << AT91SAM9261_ID_SPI1,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91SAM9261_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
 static struct clk ohci_clk = {
 	.name		= "ohci_clk",
 	.pmc_mask	= 1 << AT91SAM9261_ID_UHP,
@@ -121,7 +136,9 @@ static struct clk *periph_clocks[] __initdata = {
 	&spi0_clk,
 	&spi1_clk,
 	// ssc 0 .. ssc2
-	// tc0 .. tc2
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
 	&ohci_clk,
 	&lcdc_clk,
 	// irq0 .. irq2
@@ -208,7 +225,7 @@ static struct at91_gpio_bank at91sam9261_gpio[] = {
 
 static void at91sam9261_reset(void)
 {
-	at91_sys_write(AT91_RSTC_CR, (0xA5 << 24) | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
 
 

arch/arm/mach-at91rm9200/at91sam9261_devices.c → arch/arm/mach-at91/at91sam9261_devices.c

 /*
- * arch/arm/mach-at91rm9200/at91sam9261_devices.c
+ * arch/arm/mach-at91/at91sam9261_devices.c
  *
  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
  *  Copyright (C) 2005 David Brownell
@@ -159,7 +159,7 @@ static struct platform_device at91sam9261_mmc_device = {
 	.num_resources	= ARRAY_SIZE(mmc_resources),
 };
 
-void __init at91_add_device_mmc(struct at91_mmc_data *data)
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 {
 	if (!data)
 		return;
@@ -192,7 +192,7 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data)
 	platform_device_register(&at91sam9261_mmc_device);
 }
 #else
-void __init at91_add_device_mmc(struct at91_mmc_data *data) {}
+void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
 
@@ -513,6 +513,10 @@ u8 at91_leds_timer;
 
 void __init at91_init_leds(u8 cpu_led, u8 timer_led)
 {
+	/* Enable GPIO to access the LEDs */
+	at91_set_gpio_output(cpu_led, 1);
+	at91_set_gpio_output(timer_led, 1);
+
 	at91_leds_cpu	= cpu_led;
 	at91_leds_timer	= timer_led;
 }

arch/arm/mach-at91/at91sam9263.c

+/*
+ * arch/arm/mach-at91/at91sam9263.c
+ *
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/at91sam9263.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9263_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM0_BASE),
+		.length		= AT91SAM9263_SRAM0_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9263_SRAM1_BASE),
+		.length		= AT91SAM9263_SRAM1_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioCDE_clk = {
+	.name		= "pioCDE_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_PIOCDE,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc0_clk = {
+	.name		= "mci0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_MCI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc1_clk = {
+	.name		= "mci1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_MCI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi_clk = {
+	.name		= "twi_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_TWI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi0_clk = {
+	.name		= "spi0_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SPI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi1_clk = {
+	.name		= "spi1_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_SPI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tcb_clk = {
+	.name		= "tcb_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_TCB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk macb_clk = {
+	.name		= "macb_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_EMAC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udc_clk = {
+	.name		= "udc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_UDP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk isi_clk = {
+	.name		= "isi_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_ISI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ohci_clk = {
+	.name		= "ohci_clk",
+	.pmc_mask	= 1 << AT91SAM9263_ID_UHP,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioCDE_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&mmc0_clk,
+	&mmc1_clk,
+	// can
+	&twi_clk,
+	&spi0_clk,
+	&spi1_clk,
+	// ssc0 .. ssc1
+	// ac97
+	&tcb_clk,
+	// pwmc
+	&macb_clk,
+	// 2dge
+	&udc_clk,
+	&isi_clk,
+	&lcdc_clk,
+	// dma
+	&ohci_clk,
+	// irq0 .. irq1
+};
+
+/*
+ * The four programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+static struct clk pck2 = {
+	.name		= "pck2",
+	.pmc_mask	= AT91_PMC_PCK2,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 2,
+};
+static struct clk pck3 = {
+	.name		= "pck3",
+	.pmc_mask	= AT91_PMC_PCK3,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 3,
+};
+
+static void __init at91sam9263_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+	clk_register(&pck2);
+	clk_register(&pck3);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9263_gpio[] = {
+	{
+		.id		= AT91SAM9263_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOC,
+		.clock		= &pioCDE_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOD,
+		.clock		= &pioCDE_clk,
+	}, {
+		.id		= AT91SAM9263_ID_PIOCDE,
+		.offset		= AT91_PIOE,
+		.clock		= &pioCDE_clk,
+	}
+};
+
+static void at91sam9263_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9263 processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9263_initialize(unsigned long main_clock)
+{
+	/* Map peripherals */
+	iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc));
+
+	at91_arch_reset = at91sam9263_reset;
+	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9263_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9263_gpio, 5);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller (FIQ) */
+	7,	/* System Peripherals */
+	0,	/* Parallel IO Controller A */
+	0,	/* Parallel IO Controller B */
+	0,	/* Parallel IO Controller C, D and E */
+	0,
+	0,
+	6,	/* USART 0 */
+	6,	/* USART 1 */
+	6,	/* USART 2 */
+	0,	/* Multimedia Card Interface 0 */
+	0,	/* Multimedia Card Interface 1 */
+	4,	/* CAN */
+	0,	/* Two-Wire Interface */
+	6,	/* Serial Peripheral Interface 0 */
+	6,	/* Serial Peripheral Interface 1 */
+	5,	/* Serial Synchronous Controller 0 */
+	5,	/* Serial Synchronous Controller 1 */
+	6,	/* AC97 Controller */
+	0,	/* Timer Counter 0, 1 and 2 */
+	0,	/* Pulse Width Modulation Controller */
+	3,	/* Ethernet */
+	0,
+	0,	/* 2D Graphic Engine */
+	3,	/* USB Device Port */
+	0,	/* Image Sensor Interface */
+	3,	/* LDC Controller */
+	0,	/* DMA Controller */
+	0,
+	3,	/* USB Host port */
+	0,	/* Advanced Interrupt Controller (IRQ0) */
+	0,	/* Advanced Interrupt Controller (IRQ1) */
+};
+
+void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9263_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}

arch/arm/mach-at91rm9200/at91sam926x_time.c → arch/arm/mach-at91/at91sam926x_time.c

 /*
- * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c
+ * linux/arch/arm/mach-at91/at91sam926x_time.c
  *
  * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France
  * Revision	 2005 M. Nicolas Diremdjian, ATMEL Rousset, France
@@ -30,7 +30,6 @@
  * Returns number of microseconds since last timer interrupt.  Note that interrupts
  * will have been disabled by do_gettimeofday()
  *  'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy.
- *  'tick' is usecs per jiffy (linux/timex.h).
  */
 static unsigned long at91sam926x_gettimeoffset(void)
 {
@@ -39,7 +38,7 @@ static unsigned long at91sam926x_gettimeoffset(void)
 
 	elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t);		/* hardware clock cycles */
 
-	return (unsigned long)(elapsed * 1000000) / LATCH;
+	return (unsigned long)(elapsed * jiffies_to_usecs(1)) / LATCH;
 }
 
 /*

arch/arm/mach-at91rm9200/board-1arm.c → arch/arm/mach-at91/board-1arm.c

 /*
- * linux/arch/arm/mach-at91rm9200/board-1arm.c
+ * linux/arch/arm/mach-at91/board-1arm.c
  *
  *  Copyright (C) 2005 SAN People
  *

arch/arm/mach-at91rm9200/board-carmeva.c → arch/arm/mach-at91/board-carmeva.c

 /*
- * linux/arch/arm/mach-at91rm9200/board-carmeva.c
+ * linux/arch/arm/mach-at91/board-carmeva.c
  *
  *  Copyright (c) 2005 Peer Georgi
  *  		       Conitec Datasystems
@@ -134,7 +134,7 @@ static void __init carmeva_board_init(void)
 	/* Compact Flash */
 //	at91_add_device_cf(&carmeva_cf_data);
 	/* MMC */
-	at91_add_device_mmc(&carmeva_mmc_data);
+	at91_add_device_mmc(0, &carmeva_mmc_data);
 }
 
 MACHINE_START(CARMEVA, "Carmeva")

arch/arm/mach-at91rm9200/board-csb337.c → arch/arm/mach-at91/board-csb337.c

 /*
- * linux/arch/arm/mach-at91rm9200/board-csb337.c
+ * linux/arch/arm/mach-at91/board-csb337.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -24,6 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -112,6 +113,42 @@ static struct spi_board_info csb337_spi_devices[] = {
 	},
 };
 
+#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE	0x800000
+
+static struct mtd_partition csb_flash_partitions[] = {
+	{
+		.name		= "uMON flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* read only */
+	}
+};
+
+static struct physmap_flash_data csb_flash_data = {
+	.width		= 2,
+	.parts		= csb_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+	{
+		.start	= CSB_FLASH_BASE,
+		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data = &csb_flash_data,
+			},
+	.resource	= csb_flash_resources,
+	.num_resources	= ARRAY_SIZE(csb_flash_resources),
+};
+
 static void __init csb337_board_init(void)
 {
 	/* Serial */
@@ -130,7 +167,9 @@ static void __init csb337_board_init(void)
 	/* SPI */
 	at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
 	/* MMC */
-	at91_add_device_mmc(&csb337_mmc_data);
+	at91_add_device_mmc(0, &csb337_mmc_data);
+	/* NOR flash */
+	platform_device_register(&csb_flash);
 }
 
 MACHINE_START(CSB337, "Cogent CSB337")

arch/arm/mach-at91rm9200/board-csb637.c → arch/arm/mach-at91/board-csb637.c

 /*
- * linux/arch/arm/mach-at91rm9200/board-csb637.c
+ * linux/arch/arm/mach-at91/board-csb637.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -23,6 +23,7 @@
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/hardware.h>
 #include <asm/setup.h>
@@ -81,6 +82,42 @@ static struct at91_udc_data __initdata csb637_udc_data = {
 	.pullup_pin   = AT91_PIN_PB1,
 };
 
+#define CSB_FLASH_BASE	AT91_CHIPSELECT_0
+#define CSB_FLASH_SIZE	0x1000000
+
+static struct mtd_partition csb_flash_partitions[] = {
+	{
+		.name		= "uMON flash",
+		.offset		= 0,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= MTD_WRITEABLE,	/* read only */
+	}
+};
+
+static struct physmap_flash_data csb_flash_data = {
+	.width		= 2,
+	.parts		= csb_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(csb_flash_partitions),
+};
+
+static struct resource csb_flash_resources[] = {
+	{
+		.start	= CSB_FLASH_BASE,
+		.end	= CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device csb_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data = &csb_flash_data,
+			},
+	.resource	= csb_flash_resources,
+	.num_resources	= ARRAY_SIZE(csb_flash_resources),
+};
+
 static void __init csb637_board_init(void)
 {
 	/* Serial */
@@ -95,6 +132,8 @@ static void __init csb637_board_init(void)
 	at91_add_device_i2c();
 	/* SPI */
 	at91_add_device_spi(NULL, 0);
+	/* NOR flash */
+	platform_device_register(&csb_flash);
 }
 
 MACHINE_START(CSB637, "Cogent CSB637")

arch/arm/mach-at91rm9200/board-dk.c → arch/arm/mach-at91/board-dk.c

 /*
- * linux/arch/arm/mach-at91rm9200/board-dk.c
+ * linux/arch/arm/mach-at91/board-dk.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -194,7 +194,7 @@ static void __init dk_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB7, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(&dk_mmc_data);
+	at91_add_device_mmc(0, &dk_mmc_data);
 #endif
 	/* NAND */
 	at91_add_device_nand(&dk_nand_data);

arch/arm/mach-at91rm9200/board-eb9200.c → arch/arm/mach-at91/board-eb9200.c

 /*
- * linux/arch/arm/mach-at91rm9200/board-eb9200.c
+ * linux/arch/arm/mach-at91/board-eb9200.c
  *
  *  Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
  *  by Andrew Patrikalakis
@@ -109,7 +109,7 @@ static void __init eb9200_board_init(void)
 	at91_add_device_spi(NULL, 0);
 	/* MMC */
 	/* only supports 1 or 4 bit interface, not wired through to SPI */
-	at91_add_device_mmc(&eb9200_mmc_data);
+	at91_add_device_mmc(0, &eb9200_mmc_data);
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")

arch/arm/mach-at91rm9200/board-ek.c → arch/arm/mach-at91/board-ek.c

 /*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-ek.c
  *
  *  Copyright (C) 2005 SAN People
  *
@@ -154,7 +154,7 @@ static void __init ek_board_init(void)
 #else
 	/* MMC */
 	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 #endif
 	/* NOR Flash */
 	platform_device_register(&ek_flash);

arch/arm/mach-at91rm9200/board-kafa.c → arch/arm/mach-at91/board-kafa.c

 /*
- * linux/arch/arm/mach-at91rm9200/board-kafa.c
+ * linux/arch/arm/mach-at91/board-kafa.c
  *
  *  Copyright (C) 2006 Sperry-Sun
  *

arch/arm/mach-at91rm9200/board-kb9202.c → arch/arm/mach-at91/board-kb9202.c

 /*
- * linux/arch/arm/mach-at91rm9200/board-kb9202.c
+ * linux/arch/arm/mach-at91/board-kb9202.c
  *
  *  Copyright (c) 2005 kb_admin
  *  		       KwikByte, Inc.
@@ -122,7 +122,7 @@ static void __init kb9202_board_init(void)
 	/* USB Device */
 	at91_add_device_udc(&kb9202_udc_data);
 	/* MMC */
-	at91_add_device_mmc(&kb9202_mmc_data);
+	at91_add_device_mmc(0, &kb9202_mmc_data);
 	/* I2C */
 	at91_add_device_i2c();
 	/* SPI */

arch/arm/mach-at91rm9200/board-sam9260ek.c → arch/arm/mach-at91/board-sam9260ek.c

 /*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9260ek.c
  *
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2006 Atmel
@@ -118,7 +118,7 @@ static struct spi_board_info ek_spi_devices[] = {
 /*
  * MACB Ethernet device
  */
-static struct __initdata eth_platform_data ek_macb_data = {
+static struct __initdata at91_eth_data ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PA7,
 	.is_rmii	= 1,
 };
@@ -187,7 +187,7 @@ static void __init ek_board_init(void)
 	/* Ethernet */
 	at91_add_device_eth(&ek_macb_data);
 	/* MMC */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 }
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")

arch/arm/mach-at91rm9200/board-sam9261ek.c → arch/arm/mach-at91/board-sam9261ek.c

 /*
- * linux/arch/arm/mach-at91rm9200/board-ek.c
+ * linux/arch/arm/mach-at91/board-sam9261ek.c
  *
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2006 Atmel
@@ -243,7 +243,7 @@ static void __init ek_board_init(void)
 	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
 #else
 	/* MMC */
-	at91_add_device_mmc(&ek_mmc_data);
+	at91_add_device_mmc(0, &ek_mmc_data);
 #endif
 }
 

arch/arm/mach-at91/board-sam9263ek.c

+/*
+ * linux/arch/arm/mach-at91/board-sam9263ek.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 2 = USART0 .. USART2
+ *    3      = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 3, 0, -1, -1, }		/* ttyS0, ..., ttyS3 */
+};
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 16.367 MHz crystal */
+	at91sam9263_initialize(16367660);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9263_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+	.vbus_pin	= { AT91_PIN_PA24, AT91_PIN_PA21 },
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PA25,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+};
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PE18,
+	.wp_pin		= AT91_PIN_PE19,
+//	.vcc_pin	= ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= 64 * 1024 * 1024,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= 64 * 1024 * 1024,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PA22,
+	.enable_pin	= AT91_PIN_PD15,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* MMC */
+	at91_add_device_mmc(1, &ek_mmc_data);
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+}
+
+MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END

arch/arm/mach-at91rm9200/clock.c → arch/arm/mach-at91/clock.c

 /*
- * linux/arch/arm/mach-at91rm9200/clock.c
+ * linux/arch/arm/mach-at91/clock.c
  *
  * Copyright (C) 2005 David Brownell
  * Copyright (C) 2005 Ivan Kokshaysky
@@ -525,27 +525,6 @@ static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
 	return 0;
 }
 
-/*
- * Several unused clocks may be active.  Turn them off.
- */
-static void __init at91_periphclk_reset(void)
-{
-	unsigned long reg;
-	struct clk *clk;
-
-	reg = at91_sys_read(AT91_PMC_PCSR);
-
-	list_for_each_entry(clk, &clocks, node) {
-		if (clk->mode != pmc_periph_mode)
-			continue;
-
-		if (clk->users > 0)
-			reg &= ~clk->pmc_mask;
-	}
-
-	at91_sys_write(AT91_PMC_PCDR, reg);
-}
-
 static struct clk *const standard_pmc_clocks[] __initdata = {
 	/* four primary clocks */
 	&clk32k,
@@ -586,7 +565,7 @@ int __init at91_clock_init(unsigned long main_clock)
 		pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
 
 	/*
-	 * USB clock init:  choose 48 MHz PLLB value, turn all clocks off,
+	 * USB clock init:  choose 48 MHz PLLB value,
 	 * disable 48MHz clock during usb peripheral suspend.
 	 *
 	 * REVISIT:  assumes MCK doesn't derive from PLLB!
@@ -596,16 +575,10 @@ int __init at91_clock_init(unsigned long main_clock)
 	if (cpu_is_at91rm9200()) {
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP);
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP);
-	} else if (cpu_is_at91sam9261()) {
-		uhpck.pmc_mask = (AT91SAM926x_PMC_UHP | AT91_PMC_HCK0);
-		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
-		at91_sys_write(AT91_PMC_SCDR, AT91SAM926x_PMC_UHP | AT91_PMC_HCK0 | AT91SAM926x_PMC_UDP);
 	}
 	at91_sys_write(AT91_CKGR_PLLBR, 0);
 
@@ -634,11 +607,34 @@ int __init at91_clock_init(unsigned long main_clock)
 		(unsigned) main_clock / 1000000,
 		((unsigned) main_clock % 1000000) / 1000);
 
-	/* disable all programmable clocks */
-	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK0 | AT91_PMC_PCK1 | AT91_PMC_PCK2 | AT91_PMC_PCK3);
+	return 0;
+}
+
+/*
+ * Several unused clocks may be active.  Turn them off.
+ */
+static int __init at91_clock_reset(void)
+{
+	unsigned long pcdr = 0;
+	unsigned long scdr = 0;
+	struct clk *clk;
+
+	list_for_each_entry(clk, &clocks, node) {
+		if (clk->users > 0)
+			continue;
+
+		if (clk->mode == pmc_periph_mode)
+			pcdr |= clk->pmc_mask;
+
+		if (clk->mode == pmc_sys_mode)
+			scdr |= clk->pmc_mask;
+
+		pr_debug("Clocks: disable unused %s\n", clk->name);
+	}
 
-	/* disable all other unused peripheral clocks */
-	at91_periphclk_reset();
+	at91_sys_write(AT91_PMC_PCDR, pcdr);
+	at91_sys_write(AT91_PMC_SCDR, scdr);
 
 	return 0;
 }
+late_initcall(at91_clock_reset);

arch/arm/mach-at91rm9200/clock.h → arch/arm/mach-at91/clock.h

 /*
- * linux/arch/arm/mach-at91rm9200/clock.h
+ * linux/arch/arm/mach-at91/clock.h
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as

arch/arm/mach-at91rm9200/generic.h → arch/arm/mach-at91/generic.h

 /*
- * linux/arch/arm/mach-at91rm9200/generic.h
+ * linux/arch/arm/mach-at91/generic.h
  *
  *  Copyright (C) 2005 David Brownell
  *
@@ -12,11 +12,13 @@
 extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks);
 extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
+extern void __init at91sam9263_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */

arch/arm/mach-at91rm9200/gpio.c → arch/arm/mach-at91/gpio.c

 /*
- * linux/arch/arm/mach-at91rm9200/gpio.c
+ * linux/arch/arm/mach-at91/gpio.c
  *
  * Copyright (C) 2005 HP Labs
  *

arch/arm/mach-at91rm9200/irq.c → arch/arm/mach-at91/irq.c

 /*
- * linux/arch/arm/mach-at91rm9200/irq.c
+ * linux/arch/arm/mach-at91/irq.c
  *
  *  Copyright (C) 2004 SAN People
  *  Copyright (C) 2004 ATMEL

arch/arm/mach-at91rm9200/leds.c → arch/arm/mach-at91/leds.c

@@ -86,10 +86,6 @@ static int __init leds_init(void)
 	if (!at91_leds_timer || !at91_leds_cpu)
 		return -ENODEV;
 
-	/* Enable PIO to access the LEDs */
-	at91_set_gpio_output(at91_leds_timer, 1);
-	at91_set_gpio_output(at91_leds_cpu, 1);
-
 	leds_event = at91_leds_event;
 
 	leds_event(led_start);

arch/arm/mach-at91rm9200/pm.c → arch/arm/mach-at91/pm.c

 /*
- * arch/arm/mach-at91rm9200/pm.c
+ * arch/arm/mach-at91/pm.c
  * AT91 Power Management
  *
  * Copyright (C) 2005 David Brownell
@@ -80,6 +80,8 @@ static int at91_pm_verify_clocks(void)
 #warning "Check SAM9260 USB clocks"
 	} else if (cpu_is_at91sam9261()) {
 #warning "Check SAM9261 USB clocks"
+	} else if (cpu_is_at91sam9263()) {
+#warning "Check SAM9263 USB clocks"
 	}
 
 #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS

arch/arm/mach-ep93xx/clock.c

@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/module.h>
 #include <linux/string.h>
 #include <asm/div64.h>
 #include <asm/hardware.h>
@@ -124,7 +125,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	return (unsigned long)rate;
 }
 
-void ep93xx_clock_init(void)
+static int __init ep93xx_clock_init(void)
 {
 	u32 value;
 
@@ -153,4 +154,7 @@ void ep93xx_clock_init(void)
 	printk(KERN_INFO "ep93xx: FCLK %ld MHz, HCLK %ld MHz, PCLK %ld MHz\n",
 		clk_f.rate / 1000000, clk_h.rate / 1000000,
 		clk_p.rate / 1000000);
+
+	return 0;
 }
+arch_initcall(ep93xx_clock_init);

arch/arm/mach-ep93xx/core.c

@@ -152,22 +152,30 @@ struct sys_timer ep93xx_timer = {
 /*************************************************************************
  * GPIO handling for EP93xx
  *************************************************************************/
-static unsigned char gpio_int_enable[2];
-static unsigned char gpio_int_type1[2];
-static unsigned char gpio_int_type2[2];
+static unsigned char gpio_int_unmasked[3];
+static unsigned char gpio_int_enabled[3];
+static unsigned char gpio_int_type1[3];
+static unsigned char gpio_int_type2[3];
 
-static void update_gpio_ab_int_params(int port)
+static void update_gpio_int_params(int abf)
 {
-	if (port == 0) {
+	if (abf == 0) {
 		__raw_writeb(0, EP93XX_GPIO_A_INT_ENABLE);
 		__raw_writeb(gpio_int_type2[0], EP93XX_GPIO_A_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[0], EP93XX_GPIO_A_INT_TYPE1);
-		__raw_writeb(gpio_int_enable[0], EP93XX_GPIO_A_INT_ENABLE);
-	} else if (port == 1) {
+		__raw_writeb(gpio_int_unmasked[0] & gpio_int_enabled[0], EP93XX_GPIO_A_INT_ENABLE);
+	} else if (abf == 1) {
 		__raw_writeb(0, EP93XX_GPIO_B_INT_ENABLE);
 		__raw_writeb(gpio_int_type2[1], EP93XX_GPIO_B_INT_TYPE2);
 		__raw_writeb(gpio_int_type1[1], EP93XX_GPIO_B_INT_TYPE1);
-		__raw_writeb(gpio_int_enable[1], EP93XX_GPIO_B_INT_ENABLE);
+		__raw_writeb(gpio_int_unmasked[1] & gpio_int_enabled[1], EP93XX_GPIO_B_INT_ENABLE);
+	} else if (abf == 2) {
+		__raw_writeb(0, EP93XX_GPIO_F_INT_ENABLE);
+		__raw_writeb(gpio_int_type2[2], EP93XX_GPIO_F_INT_TYPE2);
+		__raw_writeb(gpio_int_type1[2], EP93XX_GPIO_F_INT_TYPE1);
+		__raw_writeb(gpio_int_unmasked[2] & gpio_int_enabled[2], EP93XX_GPIO_F_INT_ENABLE);
+	} else {
+		BUG();
 	}
 }
 
@@ -192,8 +200,13 @@ void gpio_line_config(int line, int direction)
 	local_irq_save(flags);
 	if (direction == GPIO_OUT) {
 		if (line >= 0 && line < 16) {
-			gpio_int_enable[line >> 3] &= ~(1 << (line & 7));
-			update_gpio_ab_int_params(line >> 3);
+			/* Port A/B.  */
+			gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
+			update_gpio_int_params(line >> 3);
+		} else if (line >= 40 && line < 48) {
+			/* Port F.  */
+			gpio_int_unmasked[2] &= ~(1 << (line & 7));
+			update_gpio_int_params(2);
 		}
 
 		v = __raw_readb(data_direction_register);
@@ -244,8 +257,7 @@ EXPORT_SYMBOL(gpio_line_set);
 /*************************************************************************
  * EP93xx IRQ handling
  *************************************************************************/
-static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
-		struct irq_desc *desc)
+static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned char status;
 	int i;
@@ -267,37 +279,46 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq,
 	}
 }
 
-static void ep93xx_gpio_ab_irq_mask_ack(unsigned int irq)
+static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int gpio_irq = IRQ_EP93XX_GPIO(16) + (((irq + 1) & 7) ^ 4);
+
+	desc_handle_irq(gpio_irq, irq_desc + gpio_irq);
+}
+
+static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
 {
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
-	gpio_int_enable[port] &= ~(1 << (line & 7));
-	update_gpio_ab_int_params(port);
+	gpio_int_unmasked[port] &= ~(1 << (line & 7));
+	update_gpio_int_params(port);
 
-	if (line >> 3) {
-		__raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
-	} else {
+	if (port == 0) {
 		__raw_writel(1 << (line & 7), EP93XX_GPIO_A_INT_ACK);
+	} else if (port == 1) {
+		__raw_writel(1 << (line & 7), EP93XX_GPIO_B_INT_ACK);
+	} else if (port == 2) {
+		__raw_writel(1 << (line & 7), EP93XX_GPIO_F_INT_ACK);
 	}
 }
 
-static void ep93xx_gpio_ab_irq_mask(unsigned int irq)
+static void ep93xx_gpio_irq_mask(unsigned int irq)
 {
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
-	gpio_int_enable[port] &= ~(1 << (line & 7));
-	update_gpio_ab_int_params(port);
+	gpio_int_unmasked[port] &= ~(1 << (line & 7));
+	update_gpio_int_params(port);
 }
 
-static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
+static void ep93xx_gpio_irq_unmask(unsigned int irq)
 {
 	int line = irq - IRQ_EP93XX_GPIO(0);
 	int port = line >> 3;
 
-	gpio_int_enable[port] |= 1 << (line & 7);
-	update_gpio_ab_int_params(port);
+	gpio_int_unmasked[port] |= 1 << (line & 7);
+	update_gpio_int_params(port);
 }
 
 
@@ -306,40 +327,51 @@ static void ep93xx_gpio_ab_irq_unmask(unsigned int irq)
  * edge (1) triggered, while gpio_int_type2 controls whether it
  * triggers on low/falling (0) or high/rising (1).
  */
-static int ep93xx_gpio_ab_irq_type(unsigned int irq, unsigned int type)
+static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 {
 	int port;
 	int line;
 
 	line = irq - IRQ_EP93XX_GPIO(0);
-	gpio_line_config(line, GPIO_IN);
+	if (line >= 0 && line < 16) {
+		gpio_line_config(line, GPIO_IN);
+	} else {
+		gpio_line_config(EP93XX_GPIO_LINE_F(line), GPIO_IN);
+	}
 
 	port = line >> 3;
 	line &= 7;
 
 	if (type & IRQT_RISING) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] |= 1 << line;
 		gpio_int_type2[port] |= 1 << line;
 	} else if (type & IRQT_FALLING) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] |= 1 << line;
 		gpio_int_type2[port] &= ~(1 << line);
 	} else if (type & IRQT_HIGH) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] &= ~(1 << line);
 		gpio_int_type2[port] |= 1 << line;
 	} else if (type & IRQT_LOW) {
+		gpio_int_enabled[port] |= 1 << line;
 		gpio_int_type1[port] &= ~(1 << line);
 		gpio_int_type2[port] &= ~(1 << line);
+	} else {
+		gpio_int_enabled[port] &= ~(1 << line);
 	}
-	update_gpio_ab_int_params(port);
+	update_gpio_int_params(port);
 
 	return 0;
 }
 
-static struct irq_chip ep93xx_gpio_ab_irq_chip = {
-	.ack		= ep93xx_gpio_ab_irq_mask_ack,
-	.mask		= ep93xx_gpio_ab_irq_mask,
-	.unmask		= ep93xx_gpio_ab_irq_unmask,
-	.set_type	= ep93xx_gpio_ab_irq_type,
+static struct irq_chip ep93xx_gpio_irq_chip = {
+	.name		= "GPIO",
+	.ack		= ep93xx_gpio_irq_mask_ack,
+	.mask		= ep93xx_gpio_irq_mask,
+	.unmask		= ep93xx_gpio_irq_unmask,
+	.set_type	= ep93xx_gpio_irq_type,
 };
 
 
@@ -350,12 +382,21 @@ void __init ep93xx_init_irq(void)
 	vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
 	vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
 
-	for (irq = IRQ_EP93XX_GPIO(0) ; irq <= IRQ_EP93XX_GPIO(15); irq++) {
-		set_irq_chip(irq, &ep93xx_gpio_ab_irq_chip);
+	for (irq = IRQ_EP93XX_GPIO(0); irq <= IRQ_EP93XX_GPIO(23); irq++) {
+		set_irq_chip(irq, &ep93xx_gpio_irq_chip);
 		set_irq_handler(irq, handle_level_irq);
 		set_irq_flags(irq, IRQF_VALID);
 	}
+
 	set_irq_chained_handler(IRQ_EP93XX_GPIO_AB, ep93xx_gpio_ab_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO0MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO1MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO2MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO3MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO4MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO5MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO6MUX, ep93xx_gpio_f_irq_handler);
+	set_irq_chained_handler(IRQ_EP93XX_GPIO7MUX, ep93xx_gpio_f_irq_handler);
 }
 
 
@@ -461,8 +502,6 @@ void __init ep93xx_init_devices(void)
 {
 	unsigned int v;
 
-	ep93xx_clock_init();
-
 	/*
 	 * Disallow access to MaverickCrunch initially.
 	 */
@@ -477,8 +516,4 @@ void __init ep93xx_init_devices(void)
 
 	platform_device_register(&ep93xx_rtc_device);
 	platform_device_register(&ep93xx_ohci_device);
-
-#ifdef CONFIG_CRUNCH
-	elf_hwcap |= HWCAP_CRUNCH;
-#endif
 }

arch/arm/mach-pxa/generic.c

@@ -338,6 +338,27 @@ static struct platform_device i2c_device = {
 	.num_resources	= ARRAY_SIZE(i2c_resources),
 };
 
+#ifdef CONFIG_PXA27x
+static struct resource i2c_power_resources[] = {
+	{
+		.start	= 0x40f00180,
+		.end	= 0x40f001a3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_power_device = {
+	.name		= "pxa2xx-i2c",
+	.id		= 1,
+	.resource	= i2c_power_resources,
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+};
+#endif
+
 void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
 {
 	i2c_device.dev.platform_data = info;
@@ -392,6 +413,9 @@ static struct platform_device *devices[] __initdata = {
 	&stuart_device,
 	&pxaficp_device,
 	&i2c_device,
+#ifdef CONFIG_PXA27x
+	&i2c_power_device,
+#endif
 	&i2s_device,
 	&pxartc_device,
 };

arch/arm/mach-realview/Kconfig

@@ -10,10 +10,21 @@ config MACH_REALVIEW_EB
 config REALVIEW_MPCORE
 	bool "Support MPcore tile"
 	depends on MACH_REALVIEW_EB
+	select CACHE_L2X0
 	help
 	  Enable support for the MPCore tile on the Realview platform.
 	  Since there are device address and interrupt differences, a
 	  kernel built with this option enabled is not compatible with
 	  other tiles.
 
+config REALVIEW_MPCORE_REVB
+	bool "Support MPcore RevB tile"
+	depends on REALVIEW_MPCORE
+	default n
+	help
+	  Enable support for the MPCore RevB tile on the Realview platform.
+	  Since there are device address differences, a
+	  kernel built with this option enabled is not compatible with
+	  other tiles.
+
 endmenu

arch/arm/mach-realview/platsmp.c

@@ -52,13 +52,14 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-	gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+	gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
 
 	/*
 	 * let the primary processor know we're out of the
 	 * pen, then head off into the C entry point
 	 */
 	pen_release = -1;
+	smp_wmb();
 
 	/*
 	 * Synchronise with the boot thread.
@@ -102,6 +103,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
+		smp_rmb();
 		if (pen_release == -1)
 			break;
 

arch/arm/mach-realview/realview_eb.c

@@ -31,6 +31,7 @@
 #include <asm/mach-types.h>
 #include <asm/hardware/gic.h>
 #include <asm/hardware/icst307.h>
+#include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -57,7 +58,26 @@ static struct map_desc realview_eb_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(REALVIEW_GIC_DIST_BASE),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	},
+#ifdef CONFIG_REALVIEW_MPCORE
+	{
+		.virtual	= IO_ADDRESS(REALVIEW_GIC1_CPU_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_GIC1_CPU_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_GIC1_DIST_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_GIC1_DIST_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
 	}, {
+		.virtual	= IO_ADDRESS(REALVIEW_MPCORE_L220_BASE),
+		.pfn		= __phys_to_pfn(REALVIEW_MPCORE_L220_BASE),
+		.length		= SZ_8K,
+		.type		= MT_DEVICE,
+	},
+#endif
+	{
 		.virtual	= IO_ADDRESS(REALVIEW_SCTL_BASE),
 		.pfn		= __phys_to_pfn(REALVIEW_SCTL_BASE),
 		.length		= SZ_4K,
@@ -138,19 +158,29 @@ static void __init gic_init_irq(void)
 #ifdef CONFIG_REALVIEW_MPCORE
 	unsigned int pldctrl;
 	writel(0x0000a05f, __io_address(REALVIEW_SYS_LOCK));
-	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ 0xd8);
+	pldctrl = readl(__io_address(REALVIEW_SYS_BASE)	+ REALVIEW_MPCORE_SYS_PLD_CTRL1);
 	pldctrl |= 0x00800000;	/* New irq mode */
-	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + 0xd8);
+	writel(pldctrl, __io_address(REALVIEW_SYS_BASE) + REALVIEW_MPCORE_SYS_PLD_CTRL1);
 	writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
 #endif
-	gic_dist_init(__io_address(REALVIEW_GIC_DIST_BASE));
-	gic_cpu_init(__io_address(REALVIEW_GIC_CPU_BASE));
+	gic_dist_init(0, __io_address(REALVIEW_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, __io_address(REALVIEW_GIC_CPU_BASE));
+#ifdef CONFIG_REALVIEW_MPCORE
+	gic_dist_init(1, __io_address(REALVIEW_GIC1_DIST_BASE), 64);
+	gic_cpu_init(1, __io_address(REALVIEW_GIC1_CPU_BASE));
+	gic_cascade_irq(1, IRQ_EB_IRQ1);
+#endif
 }
 
 static void __init realview_eb_init(void)
 {
 	int i;
 
+#ifdef CONFIG_REALVIEW_MPCORE
+	/* 1MB (128KB/way), 8-way associativity, evmon/parity/share enabled
+	 * Bits:  .... ...0 0111 1001 0000 .... .... .... */
+	l2x0_init(__io_address(REALVIEW_MPCORE_L220_BASE), 0x00790000, 0xfe000fff);
+#endif
 	clk_register(&realview_clcd_clk);
 
 	platform_device_register(&realview_flash_device);

arch/arm/mach-s3c2400/Kconfig

+# arch/arm/mach-s3c2400/Kconfig
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+
+
+menu "S3C2400 Machines"
+
+
+endmenu
+

arch/arm/mach-s3c2400/Makefile

+# arch/arm/mach-s3c2400/Makefile
+#
+# Copyright 2007 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:=
+obj-				:=
+
+obj-$(CONFIG_CPU_S3C2400)	+= gpio.o
+
+# Machine support
+

arch/arm/mach-s3c2410/s3c2400-gpio.c → arch/arm/mach-s3c2400/gpio.c

-/* linux/arch/arm/mach-s3c2410/s3c2400-gpio.c
+/* linux/arch/arm/mach-s3c2400/gpio.c
  *
  * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org>
  *

arch/arm/mach-s3c2410/bast-irq.c

@@ -39,7 +39,7 @@
 #include <asm/arch/bast-map.h>
 #include <asm/arch/bast-irq.h>
 
-#include "irq.h"
+#include <asm/plat-s3c24xx/irq.h>
 
 #if 0
 #include <asm/debug-ll.h>

arch/arm/mach-s3c2410/bast.h

-
+/* linux/arch/arm/mach-s3c2410/bast.h
 extern void bast_init_irq(void);

arch/arm/mach-s3c2410/mach-bast.c

@@ -50,9 +50,9 @@
 
 #include <linux/serial_8250.h>
 
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 #include "usb-simtec.h"
 
 #define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"

arch/arm/mach-s3c2410/mach-otom.c

@@ -32,10 +32,10 @@
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
 
-#include "s3c2410.h"
-#include "clock.h"
-#include "devs.h"
-#include "cpu.h"
+#include <asm/plat-s3c24xx/s3c2410.h>
+#include <asm/plat-s3c24xx/clock.h>
+#include <asm/plat-s3c24xx/devs.h>
+#include <asm/plat-s3c24xx/cpu.h>
 
 static struct map_desc otom11_iodesc[] __initdata = {
   /* Device area */