Commit f6a9ff07 authored by Peter Chen's avatar Peter Chen Committed by Greg Kroah-Hartman

usb: chipidea: add TPL support for targeted hosts

For OTG and Embedded hosts, they may need TPL (Targeted Peripheral List)
for usb certification and other vender specific requirements, the
platform can tell chipidea core driver if it supports tpl through DT
or platform data.
Signed-off-by: default avatarPeter Chen <peter.chen@freescale.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 05f8b35a
...@@ -473,6 +473,10 @@ static int ci_get_platdata(struct device *dev, ...@@ -473,6 +473,10 @@ static int ci_get_platdata(struct device *dev,
PTR_ERR(platdata->reg_vbus)); PTR_ERR(platdata->reg_vbus));
return PTR_ERR(platdata->reg_vbus); return PTR_ERR(platdata->reg_vbus);
} }
/* Get TPL support */
if (!platdata->tpl_support)
platdata->tpl_support =
of_usb_host_tpl_support(dev->of_node);
} }
if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL) if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL)
......
...@@ -60,6 +60,7 @@ static int host_start(struct ci_hdrc *ci) ...@@ -60,6 +60,7 @@ static int host_start(struct ci_hdrc *ci)
hcd->power_budget = ci->platdata->power_budget; hcd->power_budget = ci->platdata->power_budget;
hcd->phy = ci->transceiver; hcd->phy = ci->transceiver;
hcd->tpl_support = ci->platdata->tpl_support;
ehci = hcd_to_ehci(hcd); ehci = hcd_to_ehci(hcd);
ehci->caps = ci->hw_bank.cap; ehci->caps = ci->hw_bank.cap;
......
...@@ -31,6 +31,7 @@ struct ci_hdrc_platform_data { ...@@ -31,6 +31,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
void (*notify_event) (struct ci_hdrc *ci, unsigned event); void (*notify_event) (struct ci_hdrc *ci, unsigned event);
struct regulator *reg_vbus; struct regulator *reg_vbus;
bool tpl_support;
}; };
/* Default offset of capability registers */ /* Default offset of capability registers */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment