Skip to content

L
linux
Commit f741fc08 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge http://nfsclient.bkbits.net/linux-2.5 

into penguin.transmeta.com:/home/penguin/torvalds/repositories/kernel/linux
parents 49013e91 c418d3f8
Expand all Show whitespace changes
Inline Side-by-side
Showing with 559 additions and 598 deletions
drivers/ide/ide-disk.c
View file @ f741fc08
......@@ -1098,6 +1098,7 @@ static inline int idedisk_supports_host_protected_area(ide_drive_t *drive)
* in above order (i.e., if value of higher priority is available,
* reset will be ignored).
*/
#define IDE_STROKE_LIMIT (32000*1024*2)
static void init_idedisk_capacity (ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
......@@ -1118,7 +1119,7 @@ static void init_idedisk_capacity (ide_drive_t *drive)
drive->cyl = (unsigned int) capacity_2 / (drive->head * drive->sect);
drive->select.b.lba = 1;
set_max_ext = idedisk_read_native_max_address_ext(drive);
if (set_max_ext > capacity_2) {
if (set_max_ext > capacity_2 && capacity_2 > IDE_STROKE_LIMIT) {
#ifdef CONFIG_IDEDISK_STROKE
set_max_ext = idedisk_read_native_max_address_ext(drive);
set_max_ext = idedisk_set_max_address_ext(drive, set_max_ext);
......@@ -1145,7 +1146,7 @@ static void init_idedisk_capacity (ide_drive_t *drive)
drive->select.b.lba = 1;
}
if (set_max > capacity) {
if (set_max > capacity && capacity > IDE_STROKE_LIMIT) {
#ifdef CONFIG_IDEDISK_STROKE
set_max = idedisk_read_native_max_address(drive);
set_max = idedisk_set_max_address(drive, set_max);
......
drivers/ide/ide-iops.c
View file @ f741fc08
......@@ -903,6 +903,14 @@ int ide_config_drive_speed (ide_drive_t *drive, u8 speed)
* Select the drive, and issue the SETFEATURES command
*/
disable_irq_nosync(hwif->irq);
/*
* FIXME: we race against the running IRQ here if
* this is called from non IRQ context. If we use
* disable_irq() we hang on the error path. Work
* is needed.
*/
udelay(1);
SELECT_DRIVE(drive);
SELECT_MASK(drive, 0);
......
drivers/ide/ide-taskfile.c
View file @ f741fc08
......@@ -1670,7 +1670,7 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
#else
int err = 0;
int err = -EIO;
u8 args[4], *argbuf = args;
u8 xfer_rate = 0;
int argsize = 0;
......
drivers/ide/ide-timing.h
View file @ f741fc08
......@@ -244,14 +244,6 @@ static int ide_timing_compute(ide_drive_t *drive, short speed, struct ide_timing
ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B);
}
/*
* If the drive is an ATAPI device it may need slower address setup timing,
* so we stay on the safe side.
*/
if (drive->media != ide_disk)
p.setup = 120;
/*
* Convert the timing to bus clock counts.
*/
......
drivers/md/linear.c
View file @ f741fc08
......@@ -37,7 +37,11 @@ static inline dev_info_t *which_dev(mddev_t *mddev, sector_t sector)
linear_conf_t *conf = mddev_to_conf(mddev);
sector_t block = sector >> 1;
hash = conf->hash_table + sector_div(block, conf->smallest->size);
/*
* sector_div(a,b) returns the remainer and sets a to a/b
*/
(void)sector_div(block, conf->smallest->size);
hash = conf->hash_table + block;
if ((sector>>1) >= (hash->dev0->size + hash->dev0->offset))
return hash->dev1;
......@@ -75,8 +79,6 @@ static int linear_run (mddev_t *mddev)
unsigned int curr_offset;
struct list_head *tmp;
MOD_INC_USE_COUNT;
conf = kmalloc (sizeof (*conf), GFP_KERNEL);
if (!conf)
goto out;
......@@ -163,7 +165,6 @@ static int linear_run (mddev_t *mddev)
out:
if (conf)
kfree(conf);
MOD_DEC_USE_COUNT;
return 1;
}
......@@ -174,8 +175,6 @@ static int linear_stop (mddev_t *mddev)
kfree(conf->hash_table);
kfree(conf);
MOD_DEC_USE_COUNT;
return 0;
}
......@@ -189,7 +188,7 @@ static int linear_make_request (request_queue_t *q, struct bio *bio)
block = bio->bi_sector >> 1;
if (unlikely(!tmp_dev)) {
printk ("linear_make_request : hash->dev1==NULL for block %llu\n",
printk("linear_make_request: hash->dev1==NULL for block %llu\n",
(unsigned long long)block);
bio_io_error(bio, bio->bi_size);
return 0;
......@@ -199,7 +198,7 @@ static int linear_make_request (request_queue_t *q, struct bio *bio)
|| block < tmp_dev->offset)) {
char b[BDEVNAME_SIZE];
printk ("linear_make_request: Block %llu out of bounds on "
printk("linear_make_request: Block %llu out of bounds on "
"dev %s size %ld offset %ld\n",
(unsigned long long)block,
bdevname(tmp_dev->rdev->bdev, b),
......@@ -242,6 +241,7 @@ static void linear_status (struct seq_file *seq, mddev_t *mddev)
static mdk_personality_t linear_personality=
{
.name = "linear",
.owner = THIS_MODULE,
.make_request = linear_make_request,
.run = linear_run,
.stop = linear_stop,
......
drivers/md/md.c
View file @ f741fc08
This diff is collapsed.
drivers/md/multipath.c
View file @ f741fc08
......@@ -78,7 +78,7 @@ static int multipath_map (mddev_t *mddev, mdk_rdev_t **rdevp)
}
spin_unlock_irq(&conf->device_lock);
printk (KERN_ERR "multipath_map(): no more operational IO paths?\n");
printk(KERN_ERR "multipath_map(): no more operational IO paths?\n");
return (-1);
}
......@@ -130,7 +130,8 @@ int multipath_end_request(struct bio *bio, unsigned int bytes_done, int error)
*/
md_error (mp_bh->mddev, rdev);
printk(KERN_ERR "multipath: %s: rescheduling sector %llu\n",
bdev_partition_name(rdev->bdev), (unsigned long long)bio->bi_sector);
bdev_partition_name(rdev->bdev),
(unsigned long long)bio->bi_sector);
multipath_reschedule_retry(mp_bh);
}
atomic_dec(&rdev->nr_pending);
......@@ -198,16 +199,6 @@ static void multipath_status (struct seq_file *seq, mddev_t *mddev)
seq_printf (seq, "]");
}
#define LAST_DISK KERN_ALERT \
"multipath: only one IO path left and IO error.\n"
#define NO_SPARE_DISK KERN_ALERT \
"multipath: no spare IO path left!\n"
#define DISK_FAILED KERN_ALERT \
"multipath: IO failure on %s, disabling IO path. \n" \
" Operation continuing on %d IO paths.\n"
/*
* Careful, this can execute in IRQ contexts as well!
......@@ -222,7 +213,8 @@ static void multipath_error (mddev_t *mddev, mdk_rdev_t *rdev)
* first check if this is a queued request for a device
* which has just failed.
*/
printk (LAST_DISK);
printk(KERN_ALERT
"multipath: only one IO path left and IO error.\n");
/* leave it active... it's all we have */
} else {
/*
......@@ -233,17 +225,15 @@ static void multipath_error (mddev_t *mddev, mdk_rdev_t *rdev)
rdev->faulty = 1;
mddev->sb_dirty = 1;
conf->working_disks--;
printk (DISK_FAILED, bdev_partition_name (rdev->bdev),
printk(KERN_ALERT "multipath: IO failure on %s,"
" disabling IO path. \n Operation continuing"
" on %d IO paths.\n",
bdev_partition_name (rdev->bdev),
conf->working_disks);
}
}
}
#undef LAST_DISK
#undef NO_SPARE_DISK
#undef DISK_FAILED
static void print_multipath_conf (multipath_conf_t *conf)
{
int i;
......@@ -302,7 +292,7 @@ static int multipath_remove_disk(mddev_t *mddev, int number)
if (p->rdev) {
if (p->rdev->in_sync ||
atomic_read(&p->rdev->nr_pending)) {
printk(KERN_ERR "hot-remove-disk, slot %d is identified but is still operational!\n", number);
printk(KERN_ERR "hot-remove-disk, slot %d is identified" " but is still operational!\n", number);
err = -EBUSY;
goto abort;
}
......@@ -318,11 +308,7 @@ static int multipath_remove_disk(mddev_t *mddev, int number)
return err;
}
#define IO_ERROR KERN_ALERT \
"multipath: %s: unrecoverable IO read error for block %llu\n"
#define REDIRECT_SECTOR KERN_ERR \
"multipath: %s: redirecting sector %llu to another IO path\n"
/*
* This is a kernel thread which:
......@@ -354,59 +340,22 @@ static void multipathd (mddev_t *mddev)
rdev = NULL;
if (multipath_map (mddev, &rdev)<0) {
printk(IO_ERROR,
bdev_partition_name(bio->bi_bdev), (unsigned long long)bio->bi_sector);
printk(KERN_ALERT "multipath: %s: unrecoverable IO read"
" error for block %llu\n",
bdev_partition_name(bio->bi_bdev),
(unsigned long long)bio->bi_sector);
multipath_end_bh_io(mp_bh, 0);
} else {
printk(REDIRECT_SECTOR,
bdev_partition_name(bio->bi_bdev), (unsigned long long)bio->bi_sector);
printk(KERN_ERR "multipath: %s: redirecting sector %llu"
" to another IO path\n",
bdev_partition_name(bio->bi_bdev),
(unsigned long long)bio->bi_sector);
bio->bi_bdev = rdev->bdev;
generic_make_request(bio);
}
}
spin_unlock_irqrestore(&retry_list_lock, flags);
}
#undef IO_ERROR
#undef REDIRECT_SECTOR
#define INVALID_LEVEL KERN_WARNING \
"multipath: md%d: raid level not set to multipath IO (%d)\n"
#define NO_SB KERN_ERR \
"multipath: disabled IO path %s (couldn't access raid superblock)\n"
#define ERRORS KERN_ERR \
"multipath: disabled IO path %s (errors detected)\n"
#define NOT_IN_SYNC KERN_ERR \
"multipath: making IO path %s a spare path (not in sync)\n"
#define INCONSISTENT KERN_ERR \
"multipath: disabled IO path %s (inconsistent descriptor)\n"
#define ALREADY_RUNNING KERN_ERR \
"multipath: disabled IO path %s (multipath %d already operational)\n"
#define OPERATIONAL KERN_INFO \
"multipath: device %s operational as IO path %d\n"
#define MEM_ERROR KERN_ERR \
"multipath: couldn't allocate memory for md%d\n"
#define SPARE KERN_INFO \
"multipath: spare IO path %s\n"
#define NONE_OPERATIONAL KERN_ERR \
"multipath: no operational IO paths for md%d\n"
#define SB_DIFFERENCES KERN_ERR \
"multipath: detected IO path differences!\n"
#define ARRAY_IS_ACTIVE KERN_INFO \
"multipath: array md%d active with %d out of %d IO paths\n"
#define THREAD_ERROR KERN_ERR \
"multipath: couldn't allocate thread for md%d\n"
static int multipath_run (mddev_t *mddev)
{
......@@ -416,10 +365,9 @@ static int multipath_run (mddev_t *mddev)
mdk_rdev_t *rdev;
struct list_head *tmp;
MOD_INC_USE_COUNT;
if (mddev->level != LEVEL_MULTIPATH) {
printk(INVALID_LEVEL, mdidx(mddev), mddev->level);
printk("multipath: md%d: raid level not set to multipath IO (%d)\n",
mdidx(mddev), mddev->level);
goto out;
}
/*
......@@ -431,7 +379,9 @@ static int multipath_run (mddev_t *mddev)
conf = kmalloc(sizeof(multipath_conf_t), GFP_KERNEL);
mddev->private = conf;
if (!conf) {
printk(MEM_ERROR, mdidx(mddev));
printk(KERN_ERR
"multipath: couldn't allocate memory for md%d\n",
mdidx(mddev));
goto out;
}
memset(conf, 0, sizeof(*conf));
......@@ -455,7 +405,8 @@ static int multipath_run (mddev_t *mddev)
conf->device_lock = SPIN_LOCK_UNLOCKED;
if (!conf->working_disks) {
printk(NONE_OPERATIONAL, mdidx(mddev));
printk(KERN_ERR "multipath: no operational IO paths for md%d\n",
mdidx(mddev));
goto out_free_conf;
}
mddev->degraded = conf->raid_disks = conf->working_disks;
......@@ -464,7 +415,9 @@ static int multipath_run (mddev_t *mddev)
mp_pool_alloc, mp_pool_free,
NULL);
if (conf->pool == NULL) {
printk(MEM_ERROR, mdidx(mddev));
printk(KERN_ERR
"multipath: couldn't allocate memory for md%d\n",
mdidx(mddev));
goto out_free_conf;
}
......@@ -473,13 +426,15 @@ static int multipath_run (mddev_t *mddev)
mddev->thread = md_register_thread(multipathd, mddev, name);
if (!mddev->thread) {
printk(THREAD_ERROR, mdidx(mddev));
printk(KERN_ERR "multipath: couldn't allocate thread"
" for md%d\n", mdidx(mddev));
goto out_free_conf;
}
}
printk(ARRAY_IS_ACTIVE, mdidx(mddev), conf->working_disks,
mddev->raid_disks);
printk(KERN_INFO
"multipath: array md%d active with %d out of %d IO paths\n",
mdidx(mddev), conf->working_disks, mddev->raid_disks);
/*
* Ok, everything is just fine now
*/
......@@ -491,21 +446,9 @@ static int multipath_run (mddev_t *mddev)
kfree(conf);
mddev->private = NULL;
out:
MOD_DEC_USE_COUNT;
return -EIO;
}
#undef INVALID_LEVEL
#undef NO_SB
#undef ERRORS
#undef NOT_IN_SYNC
#undef INCONSISTENT
#undef ALREADY_RUNNING
#undef OPERATIONAL
#undef SPARE
#undef NONE_OPERATIONAL
#undef SB_DIFFERENCES
#undef ARRAY_IS_ACTIVE
static int multipath_stop (mddev_t *mddev)
{
......@@ -515,13 +458,13 @@ static int multipath_stop (mddev_t *mddev)
mempool_destroy(conf->pool);
kfree(conf);
mddev->private = NULL;
MOD_DEC_USE_COUNT;
return 0;
}
static mdk_personality_t multipath_personality=
{
.name = "multipath",
.owner = THIS_MODULE,
.make_request = multipath_make_request,
.run = multipath_run,
.stop = multipath_stop,
......
drivers/md/raid0.c
View file @ f741fc08
......@@ -43,12 +43,15 @@ static int create_strip_zones (mddev_t *mddev)
conf->nr_strip_zones = 0;
ITERATE_RDEV(mddev,rdev1,tmp1) {
printk("raid0: looking at %s\n", bdev_partition_name(rdev1->bdev));
printk("raid0: looking at %s\n",
bdev_partition_name(rdev1->bdev));
c = 0;
ITERATE_RDEV(mddev,rdev2,tmp2) {
printk("raid0: comparing %s(%llu) with %s(%llu)\n",
bdev_partition_name(rdev1->bdev), (unsigned long long)rdev1->size,
bdev_partition_name(rdev2->bdev), (unsigned long long)rdev2->size);
bdev_partition_name(rdev1->bdev),
(unsigned long long)rdev1->size,
bdev_partition_name(rdev2->bdev),
(unsigned long long)rdev2->size);
if (rdev2 == rdev1) {
printk("raid0: END\n");
break;
......@@ -94,7 +97,8 @@ static int create_strip_zones (mddev_t *mddev)
goto abort;
}
if (zone->dev[j]) {
printk("raid0: multiple devices for %d - aborting!\n", j);
printk("raid0: multiple devices for %d - aborting!\n",
j);
goto abort;
}
zone->dev[j] = rdev1;
......@@ -103,8 +107,8 @@ static int create_strip_zones (mddev_t *mddev)
cnt++;
}
if (cnt != mddev->raid_disks) {
printk("raid0: too few disks (%d of %d) - aborting!\n", cnt,
mddev->raid_disks);
printk("raid0: too few disks (%d of %d) - aborting!\n",
cnt, mddev->raid_disks);
goto abort;
}
zone->nb_dev = cnt;
......@@ -144,7 +148,8 @@ static int create_strip_zones (mddev_t *mddev)
zone->nb_dev = c;
zone->size = (smallest->size - current_offset) * c;
printk("raid0: zone->nb_dev: %d, size: %llu\n",zone->nb_dev, (unsigned long long)zone->size);
printk("raid0: zone->nb_dev: %d, size: %llu\n",
zone->nb_dev, (unsigned long long)zone->size);
if (!conf->smallest || (zone->size < conf->smallest->size))
conf->smallest = zone;
......@@ -153,7 +158,8 @@ static int create_strip_zones (mddev_t *mddev)
curr_zone_offset += zone->size;
current_offset = smallest->size;
printk("raid0: current zone offset: %llu\n", (unsigned long long)current_offset);
printk("raid0: current zone offset: %llu\n",
(unsigned long long)current_offset);
}
printk("raid0: done.\n");
return 0;
......@@ -191,8 +197,6 @@ static int raid0_run (mddev_t *mddev)
s64 size;
raid0_conf_t *conf;
MOD_INC_USE_COUNT;
conf = vmalloc(sizeof (raid0_conf_t));
if (!conf)
goto out;
......@@ -201,8 +205,10 @@ static int raid0_run (mddev_t *mddev)
if (create_strip_zones (mddev))
goto out_free_conf;
printk("raid0 : md_size is %llu blocks.\n", (unsigned long long)md_size[mdidx(mddev)]);
printk("raid0 : conf->smallest->size is %llu blocks.\n", (unsigned long long)conf->smallest->size);
printk("raid0 : md_size is %llu blocks.\n",
(unsigned long long)md_size[mdidx(mddev)]);
printk("raid0 : conf->smallest->size is %llu blocks.\n",
(unsigned long long)conf->smallest->size);
{
#if __GNUC__ < 3
volatile
......@@ -267,7 +273,6 @@ static int raid0_run (mddev_t *mddev)
vfree(conf);
mddev->private = NULL;
out:
MOD_DEC_USE_COUNT;
return 1;
}
......@@ -282,7 +287,6 @@ static int raid0_stop (mddev_t *mddev)
vfree (conf);
mddev->private = NULL;
MOD_DEC_USE_COUNT;
return 0;
}
......@@ -357,16 +361,21 @@ static int raid0_make_request (request_queue_t *q, struct bio *bio)
return 1;
bad_map:
printk ("raid0_make_request bug: can't convert block across chunks or bigger than %dk %llu %d\n", chunk_size, (unsigned long long)bio->bi_sector, bio->bi_size >> 10);
printk("raid0_make_request bug: can't convert block across chunks"
" or bigger than %dk %llu %d\n", chunk_size,
(unsigned long long)bio->bi_sector, bio->bi_size >> 10);
goto outerr;
bad_hash:
printk("raid0_make_request bug: hash==NULL for block %llu\n", (unsigned long long)block);
printk("raid0_make_request bug: hash==NULL for block %llu\n",
(unsigned long long)block);
goto outerr;
bad_zone0:
printk ("raid0_make_request bug: hash->zone0==NULL for block %llu\n", (unsigned long long)block);
printk("raid0_make_request bug: hash->zone0==NULL for block %llu\n",
(unsigned long long)block);
goto outerr;
bad_zone1:
printk ("raid0_make_request bug: hash->zone1==NULL for block %llu\n", (unsigned long long)block);
printk("raid0_make_request bug: hash->zone1==NULL for block %llu\n",
(unsigned long long)block);
outerr:
bio_io_error(bio, bio->bi_size);
return 0;
......@@ -411,6 +420,7 @@ static void raid0_status (struct seq_file *seq, mddev_t *mddev)
static mdk_personality_t raid0_personality=
{
.name = "raid0",
.owner = THIS_MODULE,
.make_request = raid0_make_request,
.run = raid0_run,
.stop = raid0_stop,
......
drivers/md/raid1.c
View file @ f741fc08
......@@ -217,7 +217,7 @@ static int map(mddev_t *mddev, mdk_rdev_t **rdevp)
}
spin_unlock_irq(&conf->device_lock);
printk (KERN_ERR "raid1_map(): huh, no more operational devices?\n");
printk(KERN_ERR "raid1_map(): huh, no more operational devices?\n");
return -1;
}
......@@ -584,22 +584,6 @@ static void status(struct seq_file *seq, mddev_t *mddev)
seq_printf(seq, "]");
}
#define LAST_DISK KERN_ALERT \
"raid1: only one disk left and IO error.\n"
#define NO_SPARE_DISK KERN_ALERT \
"raid1: no spare disk left, degrading mirror level by one.\n"
#define DISK_FAILED KERN_ALERT \
"raid1: Disk failure on %s, disabling device. \n" \
" Operation continuing on %d devices\n"
#define START_SYNCING KERN_ALERT \
"raid1: start syncing spare disk.\n"
#define ALREADY_SYNCING KERN_INFO \
"raid1: syncing already in progress.\n"
static void error(mddev_t *mddev, mdk_rdev_t *rdev)
{
......@@ -629,7 +613,9 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev)
rdev->in_sync = 0;
rdev->faulty = 1;
mddev->sb_dirty = 1;
printk(DISK_FAILED, bdev_partition_name(rdev->bdev), conf->working_disks);
printk(KERN_ALERT "raid1: Disk failure on %s, disabling device. \n"
" Operation continuing on %d devices\n",
bdev_partition_name(rdev->bdev), conf->working_disks);
}
static void print_conf(conf_t *conf)
......@@ -743,11 +729,6 @@ static int raid1_remove_disk(mddev_t *mddev, int number)
return err;
}
#define IO_ERROR KERN_ALERT \
"raid1: %s: unrecoverable I/O read error for block %llu\n"
#define REDIRECT_SECTOR KERN_ERR \
"raid1: %s: redirecting sector %llu to another mirror\n"
static int end_sync_read(struct bio *bio, unsigned int bytes_done, int error)
{
......@@ -823,7 +804,10 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio)
* There is no point trying a read-for-reconstruct as
* reconstruct is about to be aborted
*/
printk(IO_ERROR, bdev_partition_name(bio->bi_bdev), (unsigned long long)r1_bio->sector);
printk(KERN_ALERT "raid1: %s: unrecoverable I/O read error"
" for block %llu\n",
bdev_partition_name(bio->bi_bdev),
(unsigned long long)r1_bio->sector);
md_done_sync(mddev, r1_bio->master_bio->bi_size >> 9, 0);
put_buf(r1_bio);
return;
......@@ -874,7 +858,8 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio)
* Nowhere to write this to... I guess we
* must be done
*/
printk(KERN_ALERT "raid1: sync aborting as there is nowhere to write sector %llu\n",
printk(KERN_ALERT "raid1: sync aborting as there is nowhere"
" to write sector %llu\n",
(unsigned long long)r1_bio->sector);
md_done_sync(mddev, r1_bio->master_bio->bi_size >> 9, 0);
put_buf(r1_bio);
......@@ -928,12 +913,17 @@ static void raid1d(mddev_t *mddev)
case READ:
case READA:
if (map(mddev, &rdev) == -1) {
printk(IO_ERROR, bdev_partition_name(bio->bi_bdev), (unsigned long long)r1_bio->sector);
printk(KERN_ALERT "raid1: %s: unrecoverable I/O"
" read error for block %llu\n",
bdev_partition_name(bio->bi_bdev),
(unsigned long long)r1_bio->sector);
raid_end_bio_io(r1_bio, 0);
break;
}
printk(REDIRECT_SECTOR,
bdev_partition_name(rdev->bdev), (unsigned long long)r1_bio->sector);
printk(KERN_ERR "raid1: %s: redirecting sector %llu to"
" another mirror\n",
bdev_partition_name(rdev->bdev),
(unsigned long long)r1_bio->sector);
bio->bi_bdev = rdev->bdev;
bio->bi_sector = r1_bio->sector + rdev->data_offset;
bio->bi_rw = r1_bio->cmd;
......@@ -1063,45 +1053,6 @@ static int sync_request(mddev_t *mddev, sector_t sector_nr, int go_faster)
return nr_sectors;
}
#define INVALID_LEVEL KERN_WARNING \
"raid1: md%d: raid level not set to mirroring (%d)\n"
#define NO_SB KERN_ERR \
"raid1: disabled mirror %s (couldn't access raid superblock)\n"
#define ERRORS KERN_ERR \
"raid1: disabled mirror %s (errors detected)\n"
#define NOT_IN_SYNC KERN_ERR \
"raid1: disabled mirror %s (not in sync)\n"
#define INCONSISTENT KERN_ERR \
"raid1: disabled mirror %s (inconsistent descriptor)\n"
#define ALREADY_RUNNING KERN_ERR \
"raid1: disabled mirror %s (mirror %d already operational)\n"
#define OPERATIONAL KERN_INFO \
"raid1: device %s operational as mirror %d\n"
#define MEM_ERROR KERN_ERR \
"raid1: couldn't allocate memory for md%d\n"
#define SPARE KERN_INFO \
"raid1: spare disk %s\n"
#define NONE_OPERATIONAL KERN_ERR \
"raid1: no operational mirrors for md%d\n"
#define ARRAY_IS_ACTIVE KERN_INFO \
"raid1: raid set md%d active with %d out of %d mirrors\n"
#define THREAD_ERROR KERN_ERR \
"raid1: couldn't allocate thread for md%d\n"
#define START_RESYNC KERN_WARNING \
"raid1: raid set md%d not clean; reconstructing mirrors\n"
static int run(mddev_t *mddev)
{
conf_t *conf;
......@@ -1110,10 +1061,9 @@ static int run(mddev_t *mddev)
mdk_rdev_t *rdev;
struct list_head *tmp;
MOD_INC_USE_COUNT;
if (mddev->level != 1) {
printk(INVALID_LEVEL, mdidx(mddev), mddev->level);
printk("raid1: md%d: raid level not set to mirroring (%d)\n",
mdidx(mddev), mddev->level);
goto out;
}
/*
......@@ -1124,7 +1074,8 @@ static int run(mddev_t *mddev)
conf = kmalloc(sizeof(conf_t), GFP_KERNEL);
mddev->private = conf;
if (!conf) {
printk(MEM_ERROR, mdidx(mddev));
printk(KERN_ERR "raid1: couldn't allocate memory for md%d\n",
mdidx(mddev));
goto out;
}
memset(conf, 0, sizeof(*conf));
......@@ -1132,7 +1083,8 @@ static int run(mddev_t *mddev)
conf->r1bio_pool = mempool_create(NR_RAID1_BIOS, r1bio_pool_alloc,
r1bio_pool_free, NULL);
if (!conf->r1bio_pool) {
printk(MEM_ERROR, mdidx(mddev));
printk(KERN_ERR "raid1: couldn't allocate memory for md%d\n",
mdidx(mddev));
goto out;
}
......@@ -1160,7 +1112,8 @@ static int run(mddev_t *mddev)
init_waitqueue_head(&conf->wait_resume);
if (!conf->working_disks) {
printk(NONE_OPERATIONAL, mdidx(mddev));
printk(KERN_ERR "raid1: no operational mirrors for md%d\n",
mdidx(mddev));
goto out_free_conf;
}
......@@ -1190,12 +1143,16 @@ static int run(mddev_t *mddev)
{
mddev->thread = md_register_thread(raid1d, mddev, "md%d_raid1");
if (!mddev->thread) {
printk(THREAD_ERROR, mdidx(mddev));
printk(KERN_ERR
"raid1: couldn't allocate thread for md%d\n",
mdidx(mddev));
goto out_free_conf;
}
}
printk(ARRAY_IS_ACTIVE, mdidx(mddev), mddev->raid_disks - mddev->degraded, mddev->raid_disks);
printk(KERN_INFO
"raid1: raid set md%d active with %d out of %d mirrors\n",
mdidx(mddev), mddev->raid_disks - mddev->degraded,
mddev->raid_disks);
/*
* Ok, everything is just fine now
*/
......@@ -1207,7 +1164,6 @@ static int run(mddev_t *mddev)
kfree(conf);
mddev->private = NULL;
out:
MOD_DEC_USE_COUNT;
return -EIO;
}
......@@ -1221,13 +1177,13 @@ static int stop(mddev_t *mddev)
mempool_destroy(conf->r1bio_pool);
kfree(conf);
mddev->private = NULL;
MOD_DEC_USE_COUNT;
return 0;
}
static mdk_personality_t raid1_personality =
{
.name = "raid1",
.owner = THIS_MODULE,
.make_request = make_request,
.run = run,
.stop = stop,
......
drivers/md/raid5.c
View file @ f741fc08
This diff is collapsed.
drivers/media/radio/radio-cadet.c
View file @ f741fc08
......@@ -23,7 +23,9 @@
* 2002-01-17 Adam Belay <ambx1@neo.rr.com>
* Updated to latest pnp code
*
*/
* 2003-01-31 Alan Cox <alan@redhat.com>
* Cleaned up locking, delay code, general odds and ends
*/
#include <linux/module.h> /* Modules */
#include <linux/init.h> /* Initdata */
......@@ -43,11 +45,11 @@ static int users=0;
static int curtuner=0;
static int tunestat=0;
static int sigstrength=0;
static wait_queue_head_t tunerq,rdsq,readq;
static wait_queue_head_t readq;
struct timer_list tunertimer,rdstimer,readtimer;
static __u8 rdsin=0,rdsout=0,rdsstat=0;
static unsigned char rdsbuf[RDS_BUFFER];
static int cadet_lock=0;
static spinlock_t cadet_io_lock;
static int cadet_probe(void);
......@@ -58,37 +60,19 @@ static int cadet_probe(void);
*/
static __u16 sigtable[2][4]={{5,10,30,150},{28,40,63,1000}};
static void cadet_wake(unsigned long qnum)
{
switch(qnum) {
case 0: /* cadet_setfreq */
wake_up(&tunerq);
break;
case 1: /* cadet_getrds */
wake_up(&rdsq);
break;
}
}
static int cadet_getrds(void)
{
int rdsstat=0;
cadet_lock++;
spin_lock(&cadet_io_lock);
outb(3,io); /* Select Decoder Control/Status */
outb(inb(io+1)&0x7f,io+1); /* Reset RDS detection */
cadet_lock--;
init_timer(&rdstimer);
rdstimer.function=cadet_wake;
rdstimer.data=(unsigned long)1;
rdstimer.expires=jiffies+(HZ/10);
init_waitqueue_head(&rdsq);
add_timer(&rdstimer);
sleep_on(&rdsq);
cadet_lock++;
spin_unlock(&cadet_io_lock);
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(HZ/10);
spin_lock(&cadet_io_lock);
outb(3,io); /* Select Decoder Control/Status */
if((inb(io+1)&0x80)!=0) {
rdsstat|=VIDEO_TUNER_RDS_ON;
......@@ -96,32 +80,24 @@ static int cadet_getrds(void)
if((inb(io+1)&0x10)!=0) {
rdsstat|=VIDEO_TUNER_MBS_ON;
}
cadet_lock--;
spin_unlock(&cadet_io_lock);
return rdsstat;
}
static int cadet_getstereo(void)
{
if(curtuner!=0) { /* Only FM has stereo capability! */
int ret = 0;
if(curtuner != 0) /* Only FM has stereo capability! */
return 0;
}
cadet_lock++;
spin_lock(&cadet_io_lock);
outb(7,io); /* Select tuner control */
if((inb(io+1)&0x40)==0) {
cadet_lock--;
return 1; /* Stereo pilot detected */
}
else {
cadet_lock--;
return 0; /* Mono */
}
if( (inb(io+1) & 0x40) == 0)
ret = 1;
spin_unlock(&cadet_io_lock);
return ret;
}
static unsigned cadet_gettune(void)
{
int curvol,i;
......@@ -130,7 +106,9 @@ static unsigned cadet_gettune(void)
/*
* Prepare for read
*/
cadet_lock++;
spin_lock(&cadet_io_lock);
outb(7,io); /* Select tuner control */
curvol=inb(io+1); /* Save current volume/mute setting */
outb(0x00,io+1); /* Ensure WRITE-ENABLE is LOW */
......@@ -152,13 +130,11 @@ static unsigned cadet_gettune(void)
* Restore volume/mute setting
*/
outb(curvol,io+1);
cadet_lock--;
spin_unlock(&cadet_io_lock);
return fifo;
}
static unsigned cadet_getfreq(void)
{
int i;
......@@ -191,14 +167,13 @@ static unsigned cadet_getfreq(void)
return freq;
}
static void cadet_settune(unsigned fifo)
{
int i;
unsigned test;
cadet_lock++;
spin_lock(&cadet_io_lock);
outb(7,io); /* Select tuner control */
/*
* Write the shift register
......@@ -217,11 +192,9 @@ static void cadet_settune(unsigned fifo)
test=0x1c|((fifo>>23)&0x02);
outb(test,io+1);
}
cadet_lock--;
spin_unlock(&cadet_io_lock);
}
static void cadet_setfreq(unsigned freq)
{
unsigned fifo;
......@@ -253,92 +226,90 @@ static void cadet_setfreq(unsigned freq)
/*
* Save current volume/mute setting
*/
cadet_lock++;
spin_lock(&cadet_io_lock);
outb(7,io); /* Select tuner control */
curvol=inb(io+1);
spin_unlock(&cadet_io_lock);
/*
* Tune the card
*/
for(j=3;j>-1;j--) {
cadet_settune(fifo|(j<<16));
spin_lock(&cadet_io_lock);
outb(7,io); /* Select tuner control */
outb(curvol,io+1);
cadet_lock--;
init_timer(&tunertimer);
tunertimer.function=cadet_wake;
tunertimer.data=(unsigned long)0;
tunertimer.expires=jiffies+(HZ/10);
init_waitqueue_head(&tunerq);
add_timer(&tunertimer);
sleep_on(&tunerq);
spin_unlock(&cadet_io_lock);
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(HZ/10);
cadet_gettune();
if((tunestat&0x40)==0) { /* Tuned */
if((tunestat & 0x40) == 0) { /* Tuned */
sigstrength=sigtable[curtuner][j];
return;
}
cadet_lock++;
}
cadet_lock--;
sigstrength=0;
}
static int cadet_getvol(void)
{
cadet_lock++;
int ret = 0;
spin_lock(&cadet_io_lock);
outb(7,io); /* Select tuner control */
if((inb(io+1)&0x20)!=0) {
cadet_lock--;
return 0xffff;
}
else {
cadet_lock--;
return 0;
}
if((inb(io + 1) & 0x20) != 0)
ret = 0xffff;
spin_unlock(&cadet_io_lock);
return ret;
}
static void cadet_setvol(int vol)
{
cadet_lock++;
spin_lock(&cadet_io_lock);
outb(7,io); /* Select tuner control */
if(vol>0) {
if(vol>0)
outb(0x20,io+1);
}
else {
else
outb(0x00,io+1);
}
cadet_lock--;
spin_unlock(&cadet_io_lock);
}
void cadet_handler(unsigned long data)
{
/*
* Service the RDS fifo
*/
if(cadet_lock==0) {
if(spin_trylock(&cadet_io_lock))
{
outb(0x3,io); /* Select RDS Decoder Control */
if((inb(io+1)&0x20)!=0) {
printk(KERN_CRIT "cadet: RDS fifo overflow\n");
}
outb(0x80,io); /* Select RDS fifo */
while((inb(io)&0x80)!=0) {
rdsbuf[rdsin++]=inb(io+1);
if(rdsin==rdsout) {
printk(KERN_CRIT "cadet: RDS buffer overflow\n");
}
rdsbuf[rdsin]=inb(io+1);
if(rdsin==rdsout)
printk(KERN_WARNING "cadet: RDS buffer overflow\n");
else
rdsin++;
}
spin_unlock(&cadet_io_lock);
}
/*
* Service pending read
*/
if( rdsin!=rdsout) {
if( rdsin!=rdsout)
wake_up_interruptible(&readq);
}
/*
* Clean up and exit
......@@ -359,10 +330,10 @@ static ssize_t cadet_read(struct file *file, char *data,
unsigned char readbuf[RDS_BUFFER];
if(rdsstat==0) {
cadet_lock++;
spin_lock(&cadet_io_lock);
rdsstat=1;
outb(0x80,io); /* Select RDS fifo */
cadet_lock--;
spin_unlock(&cadet_io_lock);
init_timer(&readtimer);
readtimer.function=cadet_handler;
readtimer.data=(unsigned long)0;
......@@ -370,14 +341,13 @@ static ssize_t cadet_read(struct file *file, char *data,
add_timer(&readtimer);
}
if(rdsin==rdsout) {
if (file->f_flags & O_NONBLOCK) {
if (file->f_flags & O_NONBLOCK)
return -EWOULDBLOCK;
}
interruptible_sleep_on(&readq);
}
while((i<count)&&(rdsin!=rdsout)) {
while( i<count && rdsin!=rdsout)
readbuf[i++]=rdsbuf[rdsout++];
}
if (copy_to_user(data,readbuf,i))
return -EFAULT;
return i;
......@@ -515,10 +485,8 @@ static int cadet_open(struct inode *inode, struct file *file)
static int cadet_release(struct inode *inode, struct file *file)
{
if(rdsstat==1) {
del_timer(&readtimer);
del_timer_sync(&readtimer);
rdsstat=0;
}
users--;
return 0;
}
......@@ -595,13 +563,15 @@ static int cadet_probe(void)
return -1;
}
/*
/*
* io should only be set if the user has used something like
* isapnp (the userspace program) to initialize this card for us
*/
static int __init cadet_init(void)
{
spin_lock_init(&cadet_io_lock);
/*
* If a probe was requested then probe ISAPnP first (safest)
*/
......
drivers/scsi/3w-xxxx.c
View file @ f741fc08
......@@ -677,7 +677,7 @@ static int tw_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
dprintk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): caught TW_AEN_LISTEN.\n");
memset(tw_ioctl->data_buffer, 0, tw_ioctl->data_buffer_length);
spin_lock_irqsave(&tw_dev->host->host_lock, flags);
spin_lock_irqsave(tw_dev->host->host_lock, flags);
if (tw_dev->aen_head == tw_dev->aen_tail) {
tw_aen_code = TW_AEN_QUEUE_EMPTY;
} else {
......@@ -688,7 +688,7 @@ static int tw_chrdev_ioctl(struct inode *inode, struct file *file, unsigned int
tw_dev->aen_head = tw_dev->aen_head + 1;
}
}
spin_unlock_irqrestore(&tw_dev->tw_lock, flags);
spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
memcpy(tw_ioctl->data_buffer, &tw_aen_code, sizeof(tw_aen_code));
break;
case TW_CMD_PACKET_WITH_DATA:
......
drivers/serial/Kconfig
View file @ f741fc08
......@@ -372,14 +372,25 @@ config V850E_NB85E_UART_CONSOLE
bool "Use NEC V850E on-chip UART for console"
depends on V850E_NB85E_UART
config SERIAL98
tristate "PC-9800 8251-based primary serial port support"
depends on X86_PC9800
help
If you want to use standard primary serial ports on PC-9800,
say Y. Otherwise, say N.
config SERIAL98_CONSOLE
bool "Support for console on PC-9800 standard serial port"
depends on SERIAL98=y
config SERIAL_CORE
tristate
default m if SERIAL_AMBA!=y && SERIAL_CLPS711X!=y && SERIAL_21285!=y && !SERIAL_SA1100 && !SERIAL_ANAKIN && !SERIAL_UART00 && SERIAL_8250!=y && SERIAL_MUX!=y && !SERIAL_ROCKETPORT && !SERIAL_SUNCORE && !V850E_NB85E_UART && (SERIAL_AMBA=m || SERIAL_CLPS711X=m || SERIAL_21285=m || SERIAL_8250=m || SERIAL_MUX=m)
default y if SERIAL_AMBA=y || SERIAL_CLPS711X=y || SERIAL_21285=y || SERIAL_SA1100 || SERIAL_ANAKIN || SERIAL_UART00 || SERIAL_8250=y || SERIAL_MUX=y || SERIAL_ROCKETPORT || SERIAL_SUNCORE || V850E_NB85E_UART
default m if SERIAL_AMBA!=y && SERIAL_CLPS711X!=y && SERIAL_21285!=y && !SERIAL_SA1100 && !SERIAL_ANAKIN && !SERIAL_UART00 && SERIAL_8250!=y && SERIAL_MUX!=y && !SERIAL_ROCKETPORT && !SERIAL_SUNCORE && !V850E_NB85E_UART && (SERIAL_AMBA=m || SERIAL_CLPS711X=m || SERIAL_21285=m || SERIAL_8250=m || SERIAL_MUX=m || SERIAL98=m)
default y if SERIAL_AMBA=y || SERIAL_CLPS711X=y || SERIAL_21285=y || SERIAL_SA1100 || SERIAL_ANAKIN || SERIAL_UART00 || SERIAL_8250=y || SERIAL_MUX=y || SERIAL_ROCKETPORT || SERIAL_SUNCORE || V850E_NB85E_UART || SERIAL98=y
config SERIAL_CORE_CONSOLE
bool
depends on SERIAL_AMBA_CONSOLE || SERIAL_CLPS711X_CONSOLE || SERIAL_21285_CONSOLE || SERIAL_SA1100_CONSOLE || SERIAL_ANAKIN_CONSOLE || SERIAL_UART00_CONSOLE || SERIAL_8250_CONSOLE || SERIAL_MUX_CONSOLE || SERIAL_SUNCORE || V850E_NB85E_UART_CONSOLE
depends on SERIAL_AMBA_CONSOLE || SERIAL_CLPS711X_CONSOLE || SERIAL_21285_CONSOLE || SERIAL_SA1100_CONSOLE || SERIAL_ANAKIN_CONSOLE || SERIAL_UART00_CONSOLE || SERIAL_8250_CONSOLE || SERIAL_MUX_CONSOLE || SERIAL_SUNCORE || V850E_NB85E_UART_CONSOLE || SERIAL98_CONSOLE
default y
config SERIAL_68328
......
drivers/serial/Makefile
View file @ f741fc08
......@@ -27,3 +27,4 @@ obj-$(CONFIG_SERIAL_68328) += 68328serial.o
obj-$(CONFIG_SERIAL_68360) += 68360serial.o
obj-$(CONFIG_SERIAL_COLDFIRE) += mcfserial.o
obj-$(CONFIG_V850E_NB85E_UART) += nb85e_uart.o
obj-$(CONFIG_SERIAL98) += serial98.o
fs/cramfs/inode.c
View file @ f741fc08
......@@ -43,6 +43,7 @@ static DECLARE_MUTEX(read_mutex);
static struct inode *get_cramfs_inode(struct super_block *sb, struct cramfs_inode * cramfs_inode)
{
struct inode * inode = new_inode(sb);
static struct timespec zerotime = { 0, 0 };
if (inode) {
inode->i_mode = cramfs_inode->mode;
......@@ -51,7 +52,8 @@ static struct inode *get_cramfs_inode(struct super_block *sb, struct cramfs_inod
inode->i_blocks = (cramfs_inode->size - 1) / 512 + 1;
inode->i_blksize = PAGE_CACHE_SIZE;
inode->i_gid = cramfs_inode->gid;
inode->i_mtime = inode->i_atime = inode->i_ctime = 0;
/* Struct copy intentional */
inode->i_mtime = inode->i_atime = inode->i_ctime = zerotime;
inode->i_ino = CRAMINO(cramfs_inode);
/* inode->i_nlink is left 1 - arguably wrong for directories,
but it's the best we can do without reading the directory
......
fs/exec.c
View file @ f741fc08
......@@ -38,7 +38,6 @@
#include <linux/binfmts.h>
#include <linux/swap.h>
#include <linux/utsname.h>
#define __NO_VERSION__
#include <linux/module.h>
#include <linux/namei.h>
#include <linux/proc_fs.h>
......
fs/nfsd/export.c
View file @ f741fc08
......@@ -496,13 +496,19 @@ exp_parent(svc_client *clp, struct vfsmount *mnt, struct dentry *dentry,
{
svc_export *exp;
read_lock(&dparent_lock);
dget(dentry);
exp = exp_get_by_name(clp, mnt, dentry, reqp);
while (exp == NULL && dentry != dentry->d_parent) {
dentry = dentry->d_parent;
struct dentry *parent;
read_lock(&dparent_lock);
parent = dget(dentry->d_parent);
dput(dentry);
dentry = parent;
read_unlock(&dparent_lock);
exp = exp_get_by_name(clp, mnt, dentry, reqp);
}
read_unlock(&dparent_lock);
dput(dentry);
return exp;
}
......
fs/nfsd/nfs4xdr.c
View file @ f741fc08
......@@ -231,6 +231,7 @@ xdr_error: \
p += XDR_QUADLEN(nbytes); \
} while (0)
/* READ_BUF, read_buf(): nbytes must be <= PAGE_SIZE */
#define READ_BUF(nbytes) do { \
if (nbytes <= (u32)((char *)argp->end - (char *)argp->p)) { \
p = argp->p; \
......@@ -244,15 +245,15 @@ xdr_error: \
u32 *read_buf(struct nfsd4_compoundargs *argp, int nbytes)
{
/* We want more bytes than seem to be available.
* Maybe we need a new page, may wehave just run out
* Maybe we need a new page, maybe we have just run out
*/
int avail = (char*)argp->end - (char*)argp->p;
u32 *p;
if (avail + argp->pagelen < nbytes)
return NULL;
if (avail + PAGE_SIZE > nbytes) /* need more than a page !! */
if (avail + PAGE_SIZE < nbytes) /* need more than a page !! */
return NULL;
/* ok, we can do it with the tail plus the next page */
/* ok, we can do it with the current plus the next page */
if (nbytes <= sizeof(argp->tmp))
p = argp->tmp;
else {
......@@ -851,16 +852,16 @@ nfsd4_decode_write(struct nfsd4_compoundargs *argp, struct nfsd4_write *write)
v++;
write->wr_vec[v].iov_base = page_address(argp->pagelist[0]);
argp->pagelist++;
if (argp->pagelen >= PAGE_SIZE) {
if (len >= PAGE_SIZE) {
write->wr_vec[v].iov_len = PAGE_SIZE;
argp->pagelen -= PAGE_SIZE;
} else {
write->wr_vec[v].iov_len = argp->pagelen;
argp->pagelen = 0;
argp->pagelen -= len;
}
}
argp->end = (u32*) (write->wr_vec[v].iov_base + write->wr_vec[v].iov_len);
argp->p = (u32*) (write->wr_vec[v].iov_base + len);
argp->p = (u32*) (write->wr_vec[v].iov_base + (XDR_QUADLEN(len) << 2));
write->wr_vec[v].iov_len = len;
write->wr_vlen = v+1;
......@@ -1690,7 +1691,8 @@ nfsd4_encode_read(struct nfsd4_compoundres *resp, int nfserr, struct nfsd4_read
{
u32 eof;
int v, pn;
unsigned long maxcount, len;
unsigned long maxcount;
long len;
ENCODE_HEAD;
if (nfserr)
......@@ -1731,6 +1733,10 @@ nfsd4_encode_read(struct nfsd4_compoundres *resp, int nfserr, struct nfsd4_read
resp->xbuf->page_len = maxcount;
/* read zero bytes -> don't set up tail */
if(!maxcount)
return 0;
/* set up page for remaining responses */
svc_take_page(resp->rqstp);
resp->xbuf->tail[0].iov_base =
......
fs/quota.c
View file @ f741fc08
......@@ -221,12 +221,17 @@ asmlinkage long sys_quotactl(unsigned int cmd, const char *special, qid_t id, ca
uint cmds, type;
struct super_block *sb = NULL;
struct block_device *bdev;
char *tmp;
int ret = -ENODEV;
cmds = cmd >> SUBCMDSHIFT;
type = cmd & SUBCMDMASK;
bdev = lookup_bdev(special);
tmp = getname(special);
if (IS_ERR(tmp))
return PTR_ERR(tmp);
bdev = lookup_bdev(tmp);
putname(tmp);
if (IS_ERR(bdev))
return PTR_ERR(bdev);
sb = get_super(bdev);
......
include/asm-i386/ide.h
View file @ f741fc08
......@@ -26,6 +26,9 @@
static __inline__ int ide_default_irq(unsigned long base)
{
switch (base) {
#ifdef CONFIG_X86_PC9800
case 0x640: return 9;
#endif
case 0x1f0: return 14;
case 0x170: return 15;
case 0x1e8: return 11;
......@@ -40,12 +43,17 @@ static __inline__ int ide_default_irq(unsigned long base)
static __inline__ unsigned long ide_default_io_base(int index)
{
switch (index) {
#ifdef CONFIG_X86_PC9800
case 0:
case 1: return 0x640;
#else
case 0: return 0x1f0;
case 1: return 0x170;
case 2: return 0x1e8;
case 3: return 0x168;
case 4: return 0x1e0;
case 5: return 0x160;
#endif
default:
return 0;
}
......@@ -56,13 +64,24 @@ static __inline__ void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_por
{
unsigned long reg = data_port;
int i;
#ifdef CONFIG_X86_PC9800
unsigned long increment = data_port == 0x640 ? 2 : 1;
#endif
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
hw->io_ports[i] = reg;
#ifdef CONFIG_X86_PC9800
reg += increment;
#else
reg += 1;
#endif
}
if (ctrl_port) {
hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port;
#ifdef CONFIG_X86_PC9800
} else if (data_port == 0x640) {
hw->io_ports[IDE_CONTROL_OFFSET] = 0x74c;
#endif
} else {
hw->io_ports[IDE_CONTROL_OFFSET] = hw->io_ports[IDE_DATA_OFFSET] + 0x206;
}
......
include/asm-i386/uaccess.h
View file @ f741fc08
......@@ -510,9 +510,9 @@ long __strncpy_from_user(char *dst, const char *src, long count);
*
* Context: User context only. This function may sleep.
*
* Get the size of a NULL-terminated string in user space.
* Get the size of a NUL-terminated string in user space.
*
* Returns the size of the string INCLUDING the terminating NULL.
* Returns the size of the string INCLUDING the terminating NUL.
* On exception, returns 0.
*
* If there is a limit on the length of a valid string, you may wish to
......
include/asm-s390/bitops.h
View file @ f741fc08
......@@ -51,7 +51,7 @@ extern const char _sb_findmap[];
#ifdef CONFIG_SMP
/*
* SMP save set_bit routine based on compare and swap (CS)
* SMP safe set_bit routine based on compare and swap (CS)
*/
static inline void set_bit_cs(int nr, volatile unsigned long *ptr)
{
......@@ -76,7 +76,7 @@ static inline void set_bit_cs(int nr, volatile unsigned long *ptr)
}
/*
* SMP save clear_bit routine based on compare and swap (CS)
* SMP safe clear_bit routine based on compare and swap (CS)
*/
static inline void clear_bit_cs(int nr, volatile unsigned long *ptr)
{
......@@ -101,7 +101,7 @@ static inline void clear_bit_cs(int nr, volatile unsigned long *ptr)
}
/*
* SMP save change_bit routine based on compare and swap (CS)
* SMP safe change_bit routine based on compare and swap (CS)
*/
static inline void change_bit_cs(int nr, volatile unsigned long *ptr)
{
......@@ -126,7 +126,7 @@ static inline void change_bit_cs(int nr, volatile unsigned long *ptr)
}
/*
* SMP save test_and_set_bit routine based on compare and swap (CS)
* SMP safe test_and_set_bit routine based on compare and swap (CS)
*/
static inline int
test_and_set_bit_cs(int nr, volatile unsigned long *ptr)
......@@ -153,7 +153,7 @@ test_and_set_bit_cs(int nr, volatile unsigned long *ptr)
}
/*
* SMP save test_and_clear_bit routine based on compare and swap (CS)
* SMP safe test_and_clear_bit routine based on compare and swap (CS)
*/
static inline int
test_and_clear_bit_cs(int nr, volatile unsigned long *ptr)
......@@ -180,7 +180,7 @@ test_and_clear_bit_cs(int nr, volatile unsigned long *ptr)
}
/*
* SMP save test_and_change_bit routine based on compare and swap (CS)
* SMP safe test_and_change_bit routine based on compare and swap (CS)
*/
static inline int
test_and_change_bit_cs(int nr, volatile unsigned long *ptr)
......
include/linux/raid/md_k.h
View file @ f741fc08
......@@ -254,6 +254,7 @@ struct mddev_s
struct mdk_personality_s
{
char *name;
struct module *owner;
int (*make_request)(request_queue_t *q, struct bio *bio);
int (*run)(mddev_t *mddev);
int (*stop)(mddev_t *mddev);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7