PCI: Fix whitespace, capitalization, and spelling errors

Fix whitespace, capitalization, and spelling errors.  No functional change.
I know "busses" is not an error, but "buses" was more common, so I used it
consistently.

Signed-off-by: Marta Rybczynska <rybczynska@gmail.com> (pci_reset_bridge_secondary_bus())
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

drivers/pci/ats.c

@@ -410,7 +410,7 @@ EXPORT_SYMBOL_GPL(pci_disable_pasid);
  * Otherwise is returns a bitmask with supported features. Current
  * features reported are:
  * PCI_PASID_CAP_EXEC - Execute permission supported
- * PCI_PASID_CAP_PRIV - Priviledged mode supported
+ * PCI_PASID_CAP_PRIV - Privileged mode supported
  */
 int pci_pasid_features(struct pci_dev *pdev)
 {

drivers/pci/host/pci-tegra.c

@@ -249,7 +249,7 @@ struct tegra_pcie {
 	void __iomem *afi;
 	int irq;
 
-	struct list_head busses;
+	struct list_head buses;
 	struct resource *cs;
 
 	struct resource io;
@@ -399,14 +399,14 @@ static struct tegra_pcie_bus *tegra_pcie_bus_alloc(struct tegra_pcie *pcie,
 
 /*
  * Look up a virtual address mapping for the specified bus number. If no such
- * mapping existis, try to create one.
+ * mapping exists, try to create one.
  */
 static void __iomem *tegra_pcie_bus_map(struct tegra_pcie *pcie,
 					unsigned int busnr)
 {
 	struct tegra_pcie_bus *bus;
 
-	list_for_each_entry(bus, &pcie->busses, list)
+	list_for_each_entry(bus, &pcie->buses, list)
 		if (bus->nr == busnr)
 			return (void __iomem *)bus->area->addr;
 
@@ -414,7 +414,7 @@ static void __iomem *tegra_pcie_bus_map(struct tegra_pcie *pcie,
 	if (IS_ERR(bus))
 		return NULL;
 
-	list_add_tail(&bus->list, &pcie->busses);
+	list_add_tail(&bus->list, &pcie->buses);
 
 	return (void __iomem *)bus->area->addr;
 }
@@ -808,7 +808,7 @@ static int tegra_pcie_enable_controller(struct tegra_pcie *pcie)
 	value &= ~AFI_FUSE_PCIE_T0_GEN2_DIS;
 	afi_writel(pcie, value, AFI_FUSE);
 
-	/* initialze internal PHY, enable up to 16 PCIE lanes */
+	/* initialize internal PHY, enable up to 16 PCIE lanes */
 	pads_writel(pcie, 0x0, PADS_CTL_SEL);
 
 	/* override IDDQ to 1 on all 4 lanes */
@@ -1624,7 +1624,7 @@ static int tegra_pcie_probe(struct platform_device *pdev)
 	if (!pcie)
 		return -ENOMEM;
 
-	INIT_LIST_HEAD(&pcie->busses);
+	INIT_LIST_HEAD(&pcie->buses);
 	INIT_LIST_HEAD(&pcie->ports);
 	pcie->soc_data = match->data;
 	pcie->dev = &pdev->dev;

drivers/pci/host/pcie-designware.c

@@ -197,7 +197,7 @@ static int find_valid_pos0(struct pcie_port *pp, int msgvec, int pos, int *pos0)
 			return -ENOSPC;
 		/*
 		 * Check if this position is at correct offset.nvec is always a
-		 * power of two. pos0 must be nvec bit alligned.
+		 * power of two. pos0 must be nvec bit aligned.
 		 */
 		if (pos % msgvec)
 			pos += msgvec - (pos % msgvec);

drivers/pci/hotplug/Kconfig

@@ -133,8 +133,8 @@ config HOTPLUG_PCI_RPA_DLPAR
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called rpadlpar_io.
- 
- 	  When in doubt, say N.
+
+	  When in doubt, say N.
 
 config HOTPLUG_PCI_SGI
 	tristate "SGI PCI Hotplug Support"

drivers/pci/hotplug/Makefile

@@ -31,7 +31,7 @@ pci_hotplug-objs	+=	cpci_hotplug_core.o	\
 				cpci_hotplug_pci.o
 endif
 ifdef CONFIG_ACPI
-pci_hotplug-objs 	+= 	acpi_pcihp.o
+pci_hotplug-objs	+=	acpi_pcihp.o
 endif
 
 cpqphp-objs		:=	cpqphp_core.o	\

drivers/pci/hotplug/acpiphp_core.c

@@ -111,7 +111,7 @@ int acpiphp_register_attention(struct acpiphp_attention_info *info)
  * @info: must match the pointer used to register
  *
  * Description: This is used to un-register a hardware specific acpi
- * driver that manipulates the attention LED.  The pointer to the 
+ * driver that manipulates the attention LED.  The pointer to the
  * info struct must be the same as the one used to set it.
  */
 int acpiphp_unregister_attention(struct acpiphp_attention_info *info)
@@ -169,8 +169,8 @@ static int disable_slot(struct hotplug_slot *hotplug_slot)
  * was registered with us.  This allows hardware specific
  * ACPI implementations to blink the light for us.
  */
- static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
- {
+static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
+{
 	int retval = -ENODEV;
 
 	pr_debug("%s - physical_slot = %s\n", __func__,
@@ -182,8 +182,8 @@ static int disable_slot(struct hotplug_slot *hotplug_slot)
 	} else
 		attention_info = NULL;
 	return retval;
- }
- 
+}
+
 
 /**
  * get_power_status - get power status of a slot
@@ -323,7 +323,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot,
 	if (retval) {
 		pr_err("pci_hp_register failed with error %d\n", retval);
 		goto error_hpslot;
- 	}
+	}
 
 	pr_info("Slot [%s] registered\n", slot_name(slot));
 

drivers/pci/hotplug/acpiphp_glue.c

@@ -325,7 +325,7 @@ static acpi_status register_slot(acpi_handle handle, u32 lvl, void *data,
 
 	list_add_tail(&slot->node, &bridge->slots);
 
-	/* Register slots for ejectable funtions only. */
+	/* Register slots for ejectable functions only. */
 	if (acpi_pci_check_ejectable(pbus, handle)  || is_dock_device(handle)) {
 		unsigned long long sun;
 		int retval;

drivers/pci/hotplug/acpiphp_ibm.c

@@ -116,7 +116,7 @@ static struct bin_attribute ibm_apci_table_attr = {
 	    .read = ibm_read_apci_table,
 	    .write = NULL,
 };
-static struct acpiphp_attention_info ibm_attention_info = 
+static struct acpiphp_attention_info ibm_attention_info =
 {
 	.set_attn = ibm_set_attention_status,
 	.get_attn = ibm_get_attention_status,
@@ -171,9 +171,9 @@ static union apci_descriptor *ibm_slot_from_id(int id)
  */
 static int ibm_set_attention_status(struct hotplug_slot *slot, u8 status)
 {
-	union acpi_object args[2]; 
+	union acpi_object args[2];
 	struct acpi_object_list params = { .pointer = args, .count = 2 };
-	acpi_status stat; 
+	acpi_status stat;
 	unsigned long long rc;
 	union apci_descriptor *ibm_slot;
 
@@ -208,7 +208,7 @@ static int ibm_set_attention_status(struct hotplug_slot *slot, u8 status)
  *
  * Description: This method is registered with the acpiphp module as a
  * callback to do the device specific task of getting the LED status.
- * 
+ *
  * Because there is no direct method of getting the LED status directly
  * from an ACPI call, we read the aPCI table and parse out our
  * slot descriptor to read the status from that.
@@ -259,7 +259,7 @@ static void ibm_handle_events(acpi_handle handle, u32 event, void *context)
 	pr_debug("%s: Received notification %02x\n", __func__, event);
 
 	if (subevent == 0x80) {
-		pr_debug("%s: generationg bus event\n", __func__);
+		pr_debug("%s: generating bus event\n", __func__);
 		acpi_bus_generate_netlink_event(note->device->pnp.device_class,
 						  dev_name(&note->device->dev),
 						  note->event, detail);
@@ -387,7 +387,7 @@ static acpi_status __init ibm_find_acpi_device(acpi_handle handle,
 		u32 lvl, void *context, void **rv)
 {
 	acpi_handle *phandle = (acpi_handle *)context;
-	acpi_status status; 
+	acpi_status status;
 	struct acpi_device_info *info;
 	int retval = 0;
 
@@ -405,7 +405,7 @@ static acpi_status __init ibm_find_acpi_device(acpi_handle handle,
 			info->hardware_id.string, handle);
 		*phandle = handle;
 		/* returning non-zero causes the search to stop
-		 * and returns this value to the caller of 
+		 * and returns this value to the caller of
 		 * acpi_walk_namespace, but it also causes some warnings
 		 * in the acpi debug code to print...
 		 */

drivers/pci/hotplug/cpci_hotplug_core.c

@@ -46,7 +46,7 @@
 	do {							\
 		if (cpci_debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
-				MY_NAME , ## arg); 		\
+				MY_NAME , ## arg);		\
 	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)

drivers/pci/hotplug/cpci_hotplug_pci.c

@@ -39,7 +39,7 @@ extern int cpci_debug;
 	do {							\
 		if (cpci_debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
-				MY_NAME , ## arg); 		\
+				MY_NAME , ## arg);		\
 	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)

drivers/pci/hotplug/cpcihp_generic.c

@@ -13,14 +13,14 @@
  * option) any later version.
  *
  * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY 
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * You should have received a copy of the GNU General Public License along
@@ -53,9 +53,9 @@
 
 #define dbg(format, arg...)					\
 	do {							\
-		if(debug)					\
+		if (debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
-				MY_NAME , ## arg); 		\
+				MY_NAME , ## arg);		\
 	} while(0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)

drivers/pci/hotplug/cpcihp_zt5550.c

@@ -13,14 +13,14 @@
  * option) any later version.
  *
  * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY 
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * You should have received a copy of the GNU General Public License along
@@ -48,9 +48,9 @@
 
 #define dbg(format, arg...)					\
 	do {							\
-		if(debug)					\
+		if (debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
-				MY_NAME , ## arg); 		\
+				MY_NAME , ## arg);		\
 	} while(0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
@@ -285,7 +285,7 @@ static struct pci_device_id zt5550_hc_pci_tbl[] = {
 	{ 0, }
 };
 MODULE_DEVICE_TABLE(pci, zt5550_hc_pci_tbl);
-	
+
 static struct pci_driver zt5550_hc_driver = {
 	.name		= "zt5550_hc",
 	.id_table	= zt5550_hc_pci_tbl,

drivers/pci/hotplug/cpcihp_zt5550.h

@@ -13,14 +13,14 @@
  * option) any later version.
  *
  * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY 
- * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL 
- * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
- * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 
- * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 
- * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 
- * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 
- * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 
+ * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
+ * THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * You should have received a copy of the GNU General Public License along
@@ -55,7 +55,7 @@
 #define HC_CMD_REG		0x0C
 #define ARB_CONFIG_GNT_REG	0x10
 #define ARB_CONFIG_CFG_REG	0x12
-#define ARB_CONFIG_REG	 	0x10
+#define ARB_CONFIG_REG		0x10
 #define ISOL_CONFIG_REG		0x18
 #define FAULT_STATUS_REG	0x20
 #define FAULT_CONFIG_REG	0x24

drivers/pci/hotplug/cpqphp_core.c

@@ -862,10 +862,10 @@ static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_disable_device;
 	}
 
-	/* Check for the proper subsystem ID's
+	/* Check for the proper subsystem IDs
 	 * Intel uses a different SSID programming model than Compaq.
 	 * For Intel, each SSID bit identifies a PHP capability.
-	 * Also Intel HPC's may have RID=0.
+	 * Also Intel HPCs may have RID=0.
 	 */
 	if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL)) {
 		err(msg_HPC_not_supported);

drivers/pci/hotplug/cpqphp_ctrl.c

@@ -1231,7 +1231,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_
 
 	/* Only if mode change...*/
 	if (((bus->cur_bus_speed == PCI_SPEED_66MHz) && (adapter_speed == PCI_SPEED_66MHz_PCIX)) ||
-		((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz))) 
+		((bus->cur_bus_speed == PCI_SPEED_66MHz_PCIX) && (adapter_speed == PCI_SPEED_66MHz)))
 			set_SOGO(ctrl);
 
 	wait_for_ctrl_irq(ctrl);
@@ -1828,7 +1828,7 @@ static void interrupt_event_handler(struct controller *ctrl)
 
 				if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) {
 					dbg("button pressed\n");
-				} else if (ctrl->event_queue[loop].event_type == 
+				} else if (ctrl->event_queue[loop].event_type ==
 					   INT_BUTTON_CANCEL) {
 					dbg("button cancel\n");
 					del_timer(&p_slot->task_event);
@@ -2411,11 +2411,11 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 		if (rc)
 			return rc;
 
-		/* find range of busses to use */
+		/* find range of buses to use */
 		dbg("find ranges of buses to use\n");
 		bus_node = get_max_resource(&(resources->bus_head), 1);
 
-		/* If we don't have any busses to allocate, we can't continue */
+		/* If we don't have any buses to allocate, we can't continue */
 		if (!bus_node)
 			return -ENOMEM;
 
@@ -2900,7 +2900,7 @@ static int configure_new_function(struct controller *ctrl, struct pci_func *func
 
 			/* If this function needs an interrupt and we are behind
 			 * a bridge and the pin is tied to something that's
-			 * alread mapped, set this one the same */
+			 * already mapped, set this one the same */
 			if (temp_byte && resources->irqs &&
 			    (resources->irqs->valid_INT &
 			     (0x01 << ((temp_byte + resources->irqs->barber_pole - 1) & 0x03)))) {

drivers/pci/hotplug/cpqphp_pci.c

@@ -291,7 +291,7 @@ int cpqhp_get_bus_dev (struct controller *ctrl, u8 * bus_num, u8 * dev_num, u8 s
  *
  * Reads configuration for all slots in a PCI bus and saves info.
  *
- * Note:  For non-hot plug busses, the slot # saved is the device #
+ * Note:  For non-hot plug buses, the slot # saved is the device #
  *
  * returns 0 if success
  */
@@ -455,7 +455,7 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
  * cpqhp_save_slot_config
  *
  * Saves configuration info for all PCI devices in a given slot
- * including subordinate busses.
+ * including subordinate buses.
  *
  * returns 0 if success
  */
@@ -1556,4 +1556,3 @@ void cpqhp_destroy_board_resources (struct pci_func * func)
 		kfree(tres);
 	}
 }
-

drivers/pci/hotplug/ibmphp.h

@@ -59,7 +59,7 @@ extern int ibmphp_debug;
 
 
 /************************************************************
-*  RESOURE TYPE                                             *
+*  RESOURCE TYPE                                             *
 ************************************************************/
 
 #define EBDA_RSRC_TYPE_MASK		0x03
@@ -103,7 +103,7 @@ extern int ibmphp_debug;
 //--------------------------------------------------------------
 
 struct rio_table_hdr {
-	u8 ver_num; 
+	u8 ver_num;
 	u8 scal_count;
 	u8 riodev_count;
 	u16 offset;
@@ -127,7 +127,7 @@ struct scal_detail {
 };
 
 //--------------------------------------------------------------
-// RIO DETAIL 
+// RIO DETAIL
 //--------------------------------------------------------------
 
 struct rio_detail {
@@ -152,7 +152,7 @@ struct opt_rio {
 	u8 first_slot_num;
 	u8 middle_num;
 	struct list_head opt_rio_list;
-};	
+};
 
 struct opt_rio_lo {
 	u8 rio_type;
@@ -161,7 +161,7 @@ struct opt_rio_lo {
 	u8 middle_num;
 	u8 pack_count;
 	struct list_head opt_rio_lo_list;
-};	
+};
 
 /****************************************************************
 *  HPC DESCRIPTOR NODE                                          *
@@ -574,7 +574,7 @@ void ibmphp_hpc_stop_poll_thread(void);
 #define HPC_CTLR_IRQ_PENDG	0x80
 
 //----------------------------------------------------------------------------
-// HPC_CTLR_WROKING status return codes
+// HPC_CTLR_WORKING status return codes
 //----------------------------------------------------------------------------
 #define HPC_CTLR_WORKING_NO	0x00
 #define HPC_CTLR_WORKING_YES	0x01

drivers/pci/hotplug/ibmphp_hpc.c

@@ -258,7 +258,7 @@ static u8 i2c_ctrl_write (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8
 {
 	u8 rc;
 	void __iomem *wpg_addr;	// base addr + offset
-	unsigned long wpg_data;	// data to/from WPG LOHI format 
+	unsigned long wpg_data;	// data to/from WPG LOHI format
 	unsigned long ultemp;
 	unsigned long data;	// actual data HILO format
 	int i;
@@ -351,7 +351,7 @@ static u8 i2c_ctrl_write (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8
 }
 
 //------------------------------------------------------------
-//  Read from ISA type HPC 
+//  Read from ISA type HPC
 //------------------------------------------------------------
 static u8 isa_ctrl_read (struct controller *ctlr_ptr, u8 offset)
 {
@@ -372,7 +372,7 @@ static void isa_ctrl_write (struct controller *ctlr_ptr, u8 offset, u8 data)
 {
 	u16 start_address;
 	u16 port_address;
-	
+
 	start_address = ctlr_ptr->u.isa_ctlr.io_start;
 	port_address = start_address + (u16) offset;
 	outb (data, port_address);
@@ -656,11 +656,11 @@ int ibmphp_hpc_readslot (struct slot * pslot, u8 cmd, u8 * pstatus)
 	//--------------------------------------------------------------------
 	// cleanup
 	//--------------------------------------------------------------------
-	
+
 	// remove physical to logical address mapping
 	if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
 		iounmap (wpg_bbar);
-	
+
 	free_hpc_access ();
 
 	debug_polling ("%s - Exit rc[%d]\n", __func__, rc);
@@ -835,7 +835,7 @@ static int poll_hpc(void *data)
 		down (&semOperations);
 
 		switch (poll_state) {
-		case POLL_LATCH_REGISTER: 
+		case POLL_LATCH_REGISTER:
 			oldlatchlow = curlatchlow;
 			ctrl_count = 0x00;
 			list_for_each (pslotlist, &ibmphp_slot_head) {
@@ -892,16 +892,16 @@ static int poll_hpc(void *data)
 
 			if (kthread_should_stop())
 				goto out_sleep;
-			
+
 			down (&semOperations);
-			
+
 			if (poll_count >= POLL_LATCH_CNT) {
 				poll_count = 0;
 				poll_state = POLL_SLOTS;
 			} else
 				poll_state = POLL_LATCH_REGISTER;
 			break;
-		}	
+		}
 		/* give up the hardware semaphore */
 		up (&semOperations);
 		/* sleep for a short time just for good measure */
@@ -958,7 +958,7 @@ static int process_changeinstatus (struct slot *pslot, struct slot *poldslot)
 	// bit 5 - HPC_SLOT_PWRGD
 	if ((pslot->status & 0x20) != (poldslot->status & 0x20))
 		// OFF -> ON: ignore, ON -> OFF: disable slot
-		if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status))) 
+		if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status)))
 			disable = 1;
 
 	// bit 6 - HPC_SLOT_BUS_SPEED
@@ -980,7 +980,7 @@ static int process_changeinstatus (struct slot *pslot, struct slot *poldslot)
 					pslot->status &= ~HPC_SLOT_POWER;
 			}
 		}
-		// CLOSE -> OPEN 
+		// CLOSE -> OPEN
 		else if ((SLOT_PWRGD (poldslot->status) == HPC_SLOT_PWRGD_GOOD)
 			&& (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status))) {
 			disable = 1;
@@ -1075,7 +1075,7 @@ void __exit ibmphp_hpc_stop_poll_thread (void)
 	debug ("before locking operations \n");
 	ibmphp_lock_operations ();
 	debug ("after locking operations \n");
-	
+
 	// wait for poll thread to exit
 	debug ("before sem_exit down \n");
 	down (&sem_exit);

drivers/pci/hotplug/pci_hotplug_core.c

@@ -131,7 +131,7 @@ static ssize_t power_write_file(struct pci_slot *pci_slot, const char *buf,
 	}
 	module_put(slot->ops->owner);
 
-exit:	
+exit:
 	if (retval)
 		return retval;
 	return count;
@@ -177,7 +177,7 @@ static ssize_t attention_write_file(struct pci_slot *slot, const char *buf,
 		retval = ops->set_attention_status(slot->hotplug, attention);
 	module_put(ops->owner);
 
-exit:	
+exit:
 	if (retval)
 		return retval;
 	return count;
@@ -247,7 +247,7 @@ static ssize_t test_write_file(struct pci_slot *pci_slot, const char *buf,
 		retval = slot->ops->hardware_test(slot, test);
 	module_put(slot->ops->owner);
 
-exit:	
+exit:
 	if (retval)
 		return retval;
 	return count;
@@ -512,7 +512,7 @@ int pci_hp_deregister(struct hotplug_slot *hotplug)
  * @hotplug: pointer to the slot whose info has changed
  * @info: pointer to the info copy into the slot's info structure
  *
- * @slot must have been registered with the pci 
+ * @slot must have been registered with the pci
  * hotplug subsystem previously with a call to pci_hp_register().
  *
  * Returns 0 if successful, anything else for an error.

drivers/pci/hotplug/pciehp.h

@@ -180,5 +180,5 @@ static inline int pciehp_acpi_slot_detection_check(struct pci_dev *dev)
 {
 	return 0;
 }
-#endif 				/* CONFIG_ACPI */
+#endif				/* CONFIG_ACPI */
 #endif				/* _PCIEHP_H */

drivers/pci/hotplug/pciehp_acpi.c

@@ -78,7 +78,7 @@ static int __initdata dup_slot_id;
 static int __initdata acpi_slot_detected;
 static struct list_head __initdata dummy_slots = LIST_HEAD_INIT(dummy_slots);
 
-/* Dummy driver for dumplicate name detection */
+/* Dummy driver for duplicate name detection */
 static int __init dummy_probe(struct pcie_device *dev)
 {
 	u32 slot_cap;

drivers/pci/hotplug/pciehp_core.c

@@ -351,8 +351,8 @@ static int __init pcied_init(void)
 
 	pciehp_firmware_init();
 	retval = pcie_port_service_register(&hpdriver_portdrv);
- 	dbg("pcie_port_service_register = %d\n", retval);
-  	info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
+	dbg("pcie_port_service_register = %d\n", retval);
+	info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
 	if (retval)
 		dbg("Failure to register service\n");
 

drivers/pci/hotplug/pciehp_hpc.c

@@ -92,7 +92,7 @@ static void start_int_poll_timer(struct controller *ctrl, int sec)
 {
 	/* Clamp to sane value */
 	if ((sec <= 0) || (sec > 60))
-        	sec = 2;
+		sec = 2;
 
 	ctrl->poll_timer.function = &int_poll_timeout;
 	ctrl->poll_timer.data = (unsigned long)ctrl;
@@ -194,7 +194,7 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
 			ctrl_dbg(ctrl, "CMD_COMPLETED not clear after 1 sec\n");
 		} else if (!NO_CMD_CMPL(ctrl)) {
 			/*
-			 * This controller semms to notify of command completed
+			 * This controller seems to notify of command completed
 			 * event even though it supports none of power
 			 * controller, attention led, power led and EMI.
 			 */
@@ -926,7 +926,7 @@ struct controller *pcie_init(struct pcie_device *dev)
 	if (pciehp_writew(ctrl, PCI_EXP_SLTSTA, 0x1f))
 		goto abort_ctrl;
 
-	/* Disable sotfware notification */
+	/* Disable software notification */
 	pcie_disable_notification(ctrl);
 
 	ctrl_info(ctrl, "HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",

drivers/pci/hotplug/pcihp_skeleton.c

@@ -52,7 +52,7 @@ static LIST_HEAD(slot_list);
 	do {							\
 		if (debug)					\
 			printk (KERN_DEBUG "%s: " format "\n",	\
-				MY_NAME , ## arg); 		\
+				MY_NAME , ## arg);		\
 	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
@@ -287,7 +287,7 @@ static int __init init_slots(void)
 		hotplug_slot->release = &release_slot;
 		make_slot_name(slot);
 		hotplug_slot->ops = &skel_hotplug_slot_ops;
-		
+
 		/*
 		 * Initialize the slot info structure with some known
 		 * good values.
@@ -296,7 +296,7 @@ static int __init init_slots(void)
 		get_attention_status(hotplug_slot, &info->attention_status);
 		get_latch_status(hotplug_slot, &info->latch_status);
 		get_adapter_status(hotplug_slot, &info->adapter_status);
-		
+
 		dbg("registering slot %d\n", i);
 		retval = pci_hp_register(slot->hotplug_slot);
 		if (retval) {
@@ -336,7 +336,7 @@ static void __exit cleanup_slots(void)
 		pci_hp_deregister(slot->hotplug_slot);
 	}
 }
-		
+
 static int __init pcihp_skel_init(void)
 {
 	int retval;

drivers/pci/hotplug/rpadlpar_core.c

@@ -217,7 +217,7 @@ static int dlpar_remove_phb(char *drc_name, struct device_node *dn)
 	if (!pcibios_find_pci_bus(dn))
 		return -EINVAL;
 
-	/* If pci slot is hotplugable, use hotplug to remove it */
+	/* If pci slot is hotpluggable, use hotplug to remove it */
 	slot = find_php_slot(dn);
 	if (slot && rpaphp_deregister_slot(slot)) {
 		printk(KERN_ERR "%s: unable to remove hotplug slot %s\n",

drivers/pci/hotplug/rpaphp.h

@@ -49,9 +49,9 @@
 extern bool rpaphp_debug;
 #define dbg(format, arg...)					\
 	do {							\
-		if (rpaphp_debug)					\
+		if (rpaphp_debug)				\
 			printk(KERN_DEBUG "%s: " format,	\
-				MY_NAME , ## arg); 		\
+				MY_NAME , ## arg);		\
 	} while (0)
 #define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
 #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
@@ -99,5 +99,5 @@ void dealloc_slot_struct(struct slot *slot);
 struct slot *alloc_slot_struct(struct device_node *dn, int drc_index, char *drc_name, int power_domain);
 int rpaphp_register_slot(struct slot *slot);
 int rpaphp_deregister_slot(struct slot *slot);
-	
+
 #endif				/* _PPC64PHP_H */

drivers/pci/hotplug/rpaphp_core.c

@@ -226,7 +226,7 @@ int rpaphp_get_drc_props(struct device_node *dn, int *drc_index,
 	for (i = 0; i < indexes[0]; i++) {
 		if ((unsigned int) indexes[i + 1] == *my_index) {
 			if (drc_name)
-                		*drc_name = name_tmp;
+				*drc_name = name_tmp;
 			if (drc_type)
 				*drc_type = type_tmp;
 			if (drc_index)
@@ -289,7 +289,7 @@ static int is_php_dn(struct device_node *dn, const int **indexes,
  * rpaphp_add_slot -- declare a hotplug slot to the hotplug subsystem.
  * @dn: device node of slot
  *
- * This subroutine will register a hotplugable slot with the
+ * This subroutine will register a hotpluggable slot with the
  * PCI hotplug infrastructure. This routine is typically called
  * during boot time, if the hotplug slots are present at boot time,
  * or is called later, by the dlpar add code, if the slot is
@@ -328,7 +328,7 @@ int rpaphp_add_slot(struct device_node *dn)
 			return -ENOMEM;
 
 		slot->type = simple_strtoul(type, NULL, 10);
-				
+
 		dbg("Found drc-index:0x%x drc-name:%s drc-type:%s\n",
 				indexes[i + 1], name, type);
 
@@ -356,7 +356,7 @@ static void __exit cleanup_slots(void)
 	/*
 	 * Unregister all of our slots with the pci_hotplug subsystem,
 	 * and free up all memory that we had allocated.
-	 * memory will be freed in release_slot callback. 
+	 * memory will be freed in release_slot callback.
 	 */
 
 	list_for_each_safe(tmp, n, &rpaphp_slot_head) {

drivers/pci/hotplug/rpaphp_pci.c

@@ -44,7 +44,7 @@ int rpaphp_get_sensor_state(struct slot *slot, int *state)
 			dbg("%s: slot must be power up to get sensor-state\n",
 			    __func__);
 
-			/* some slots have to be powered up 
+			/* some slots have to be powered up
 			 * before get-sensor will succeed.
 			 */
 			rc = rtas_set_power_level(slot->power_domain, POWER_ON,
@@ -133,4 +133,3 @@ int rpaphp_enable_slot(struct slot *slot)
 
 	return 0;
 }
-

drivers/pci/hotplug/rpaphp_slot.c

 /*
- * RPA Virtual I/O device functions 
+ * RPA Virtual I/O device functions
  * Copyright (C) 2004 Linda Xie <lxie@us.ibm.com>
  *
  * All rights reserved.
@@ -51,27 +51,27 @@ struct slot *alloc_slot_struct(struct device_node *dn,
                        int drc_index, char *drc_name, int power_domain)
 {
 	struct slot *slot;
-	
+
 	slot = kzalloc(sizeof(struct slot), GFP_KERNEL);
 	if (!slot)
 		goto error_nomem;
 	slot->hotplug_slot = kzalloc(sizeof(struct hotplug_slot), GFP_KERNEL);
 	if (!slot->hotplug_slot)
-		goto error_slot;	
+		goto error_slot;
 	slot->hotplug_slot->info = kzalloc(sizeof(struct hotplug_slot_info),
 					   GFP_KERNEL);
 	if (!slot->hotplug_slot->info)
 		goto error_hpslot;
 	slot->name = kstrdup(drc_name, GFP_KERNEL);
 	if (!slot->name)
-		goto error_info;	
+		goto error_info;
 	slot->dn = dn;
 	slot->index = drc_index;
 	slot->power_domain = power_domain;
 	slot->hotplug_slot->private = slot;
 	slot->hotplug_slot->ops = &rpaphp_hotplug_slot_ops;
 	slot->hotplug_slot->release = &rpaphp_release_slot;
-	
+
 	return (slot);
 
 error_info:
@@ -91,7 +91,7 @@ static int is_registered(struct slot *slot)
 	list_for_each_entry(tmp_slot, &rpaphp_slot_head, rpaphp_slot_list) {
 		if (!strcmp(tmp_slot->name, slot->name))
 			return 1;
-	}	
+	}
 	return 0;
 }
 
@@ -104,7 +104,7 @@ int rpaphp_deregister_slot(struct slot *slot)
 		__func__, slot->name);
 
 	list_del(&slot->rpaphp_slot_list);
-	
+
 	retval = pci_hp_deregister(php_slot);
 	if (retval)
 		err("Problem unregistering a slot %s\n", slot->name);
@@ -120,7 +120,7 @@ int rpaphp_register_slot(struct slot *slot)
 	int retval;
 	int slotno;
 
-	dbg("%s registering slot:path[%s] index[%x], name[%s] pdomain[%x] type[%d]\n", 
+	dbg("%s registering slot:path[%s] index[%x], name[%s] pdomain[%x] type[%d]\n",
 		__func__, slot->dn->full_name, slot->index, slot->name,
 		slot->power_domain, slot->type);
 
@@ -128,7 +128,7 @@ int rpaphp_register_slot(struct slot *slot)
 	if (is_registered(slot)) {
 		err("rpaphp_register_slot: slot[%s] is already registered\n", slot->name);
 		return -EAGAIN;
-	}	
+	}
 
 	if (slot->dn->child)
 		slotno = PCI_SLOT(PCI_DN(slot->dn->child)->devfn);
@@ -145,4 +145,3 @@ int rpaphp_register_slot(struct slot *slot)
 	info("Slot [%s] registered\n", slot->name);
 	return 0;
 }
-

drivers/pci/hotplug/shpchp.h

@@ -216,13 +216,13 @@ struct ctrl_reg {
 
 /* offsets to the controller registers based on the above structure layout */
 enum ctrl_offsets {
-	BASE_OFFSET 	 = offsetof(struct ctrl_reg, base_offset),
-	SLOT_AVAIL1 	 = offsetof(struct ctrl_reg, slot_avail1),
+	BASE_OFFSET	 = offsetof(struct ctrl_reg, base_offset),
+	SLOT_AVAIL1	 = offsetof(struct ctrl_reg, slot_avail1),
 	SLOT_AVAIL2	 = offsetof(struct ctrl_reg, slot_avail2),
-	SLOT_CONFIG 	 = offsetof(struct ctrl_reg, slot_config),
+	SLOT_CONFIG	 = offsetof(struct ctrl_reg, slot_config),
 	SEC_BUS_CONFIG	 = offsetof(struct ctrl_reg, sec_bus_config),
 	MSI_CTRL	 = offsetof(struct ctrl_reg, msi_ctrl),
-	PROG_INTERFACE 	 = offsetof(struct ctrl_reg, prog_interface),
+	PROG_INTERFACE	 = offsetof(struct ctrl_reg, prog_interface),
 	CMD		 = offsetof(struct ctrl_reg, cmd),
 	CMD_STATUS	 = offsetof(struct ctrl_reg, cmd_status),
 	INTR_LOC	 = offsetof(struct ctrl_reg, intr_loc),

drivers/pci/hotplug/shpchp_core.c

@@ -143,11 +143,11 @@ static int init_slots(struct controller *ctrl)
 		snprintf(name, SLOT_NAME_SIZE, "%d", slot->number);
 		hotplug_slot->ops = &shpchp_hotplug_slot_ops;
 
- 		ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x "
- 			 "hp_slot=%x sun=%x slot_device_offset=%x\n",
- 			 pci_domain_nr(ctrl->pci_dev->subordinate),
- 			 slot->bus, slot->device, slot->hp_slot, slot->number,
- 			 ctrl->slot_device_offset);
+		ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x "
+			 "hp_slot=%x sun=%x slot_device_offset=%x\n",
+			 pci_domain_nr(ctrl->pci_dev->subordinate),
+			 slot->bus, slot->device, slot->hp_slot, slot->number,
+			 ctrl->slot_device_offset);
 		retval = pci_hp_register(slot->hotplug_slot,
 				ctrl->pci_dev->subordinate, slot->device, name);
 		if (retval) {

drivers/pci/hotplug/shpchp_hpc.c

@@ -116,7 +116,7 @@
 #define SLOT_REG_RSVDZ_MASK	((1 << 15) | (7 << 21))
 
 /*
- * SHPC Command Code definitnions
+ * SHPC Command Code definitions
  *
  *     Slot Operation				00h - 3Fh
  *     Set Bus Segment Speed/Mode A		40h - 47h

drivers/pci/iov.c

@@ -610,7 +610,7 @@ resource_size_t pci_sriov_resource_alignment(struct pci_dev *dev, int resno)
 	struct resource tmp;
 	enum pci_bar_type type;
 	int reg = pci_iov_resource_bar(dev, resno, &type);
-	
+
 	if (!reg)
 		return 0;
 

drivers/pci/irq.c

@@ -25,7 +25,7 @@ static void pci_note_irq_problem(struct pci_dev *pdev, const char *reason)
 /**
  * pci_lost_interrupt - reports a lost PCI interrupt
  * @pdev:	device whose interrupt is lost
- * 
+ *
  * The primary function of this routine is to report a lost interrupt
  * in a standard way which users can recognise (instead of blaming the
  * driver).

drivers/pci/msi.c

@@ -784,7 +784,7 @@ static int msix_capability_init(struct pci_dev *dev,
  * @nvec: how many MSIs have been requested ?
  * @type: are we checking for MSI or MSI-X ?
  *
- * Look at global flags, the device itself, and its parent busses
+ * Look at global flags, the device itself, and its parent buses
  * to determine if MSI/-X are supported for the device. If MSI/-X is
  * supported return 0, else return an error code.
  **/

drivers/pci/pci-acpi.c

@@ -141,7 +141,7 @@ phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle)
  * if (_PRW at S-state x)
  *	choose from highest power _SxD to lowest power _SxW
  * else // no _PRW at S-state x
- * 	choose highest power _SxD or any lower power
+ *	choose highest power _SxD or any lower power
  */
 
 static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)

drivers/pci/pci-driver.c

@@ -312,7 +312,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev,
  * __pci_device_probe - check if a driver wants to claim a specific PCI device
  * @drv: driver to call to check if it wants the PCI device
  * @pci_dev: PCI device being probed
- * 
+ *
  * returns 0 on success, else error.
  * side-effect: pci_dev->driver is set to drv when drv claims pci_dev.
  */
@@ -378,7 +378,7 @@ static int pci_device_remove(struct device * dev)
 	 * We would love to complain here if pci_dev->is_enabled is set, that
 	 * the driver should have called pci_disable_device(), but the
 	 * unfortunate fact is there are too many odd BIOS and bridge setups
-	 * that don't like drivers doing that all of the time.  
+	 * that don't like drivers doing that all of the time.
 	 * Oh well, we can dream of sane hardware when we sleep, no matter how
 	 * horrible the crap we have to deal with is when we are awake...
 	 */
@@ -1156,10 +1156,10 @@ static const struct dev_pm_ops pci_dev_pm_ops = {
  * @drv: the driver structure to register
  * @owner: owner module of drv
  * @mod_name: module name string
- * 
+ *
  * Adds the driver structure to the list of registered drivers.
- * Returns a negative value on error, otherwise 0. 
- * If no error occurred, the driver remains registered even if 
+ * Returns a negative value on error, otherwise 0.
+ * If no error occurred, the driver remains registered even if
  * no device was claimed during registration.
  */
 int __pci_register_driver(struct pci_driver *drv, struct module *owner,
@@ -1181,7 +1181,7 @@ int __pci_register_driver(struct pci_driver *drv, struct module *owner,
 /**
  * pci_unregister_driver - unregister a pci driver
  * @drv: the driver structure to unregister
- * 
+ *
  * Deletes the driver structure from the list of registered PCI drivers,
  * gives it a chance to clean up by calling its remove() function for
  * each device it was responsible for, and marks those devices as
@@ -1203,7 +1203,7 @@ static struct pci_driver pci_compat_driver = {
  * pci_dev_driver - get the pci_driver of a device
  * @dev: the device to query
  *
- * Returns the appropriate pci_driver structure or %NULL if there is no 
+ * Returns the appropriate pci_driver structure or %NULL if there is no
  * registered driver for the device.
  */
 struct pci_driver *
@@ -1224,7 +1224,7 @@ pci_dev_driver(const struct pci_dev *dev)
  * pci_bus_match - Tell if a PCI device structure has a matching PCI device id structure
  * @dev: the PCI device structure to match against
  * @drv: the device driver to search for matching PCI device id structures
- * 
+ *
  * Used by a driver to check whether a PCI device present in the
  * system is in its list of supported devices. Returns the matching
  * pci_device_id structure or %NULL if there is no match.

drivers/pci/pci-stub.c

@@ -2,13 +2,13 @@
  *
  * Copyright (C) 2008 Red Hat, Inc.
  * Author:
- * 	Chris Wright
+ *	Chris Wright
  *
  * This work is licensed under the terms of the GNU GPL, version 2.
  *
  * Usage is simple, allocate a new id to the stub driver and bind the
  * device to it.  For example:
- * 
+ *
  * # echo "8086 10f5" > /sys/bus/pci/drivers/pci-stub/new_id
  * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind
  * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/pci-stub/bind

drivers/pci/pci-sysfs.c

@@ -10,7 +10,7 @@
  *
  * File attributes for PCI devices
  *
- * Modeled after usb's driverfs.c 
+ * Modeled after usb's driverfs.c
  *
  */
 
@@ -270,13 +270,17 @@ msi_bus_store(struct device *dev, struct device_attribute *attr,
 	if (kstrtoul(buf, 0, &val) < 0)
 		return -EINVAL;
 
-	/* bad things may happen if the no_msi flag is changed
-	 * while some drivers are loaded */
+	/*
+	 * Bad things may happen if the no_msi flag is changed
+	 * while drivers are loaded.
+	 */
 	if (!capable(CAP_SYS_ADMIN))
 		return -EPERM;
 
-	/* Maybe pci devices without subordinate busses shouldn't even have this
-	 * attribute in the first place?  */
+	/*
+	 * Maybe devices without subordinate buses shouldn't have this
+	 * attribute in the first place?
+	 */
 	if (!pdev->subordinate)
 		return count;
 
@@ -670,7 +674,7 @@ pci_write_config(struct file* filp, struct kobject *kobj,
 		size = dev->cfg_size - off;
 		count = size;
 	}
-	
+
 	pci_config_pm_runtime_get(dev);
 
 	if ((off & 1) && size) {
@@ -678,7 +682,7 @@ pci_write_config(struct file* filp, struct kobject *kobj,
 		off++;
 		size--;
 	}
-	
+
 	if ((off & 3) && size > 2) {
 		u16 val = data[off - init_off];
 		val |= (u16) data[off - init_off + 1] << 8;
@@ -696,7 +700,7 @@ pci_write_config(struct file* filp, struct kobject *kobj,
 		off += 4;
 		size -= 4;
 	}
-	
+
 	if (size >= 2) {
 		u16 val = data[off - init_off];
 		val |= (u16) data[off - init_off + 1] << 8;
@@ -1229,21 +1233,21 @@ pci_read_rom(struct file *filp, struct kobject *kobj,
 
 	if (!pdev->rom_attr_enabled)
 		return -EINVAL;
-	
+
 	rom = pci_map_rom(pdev, &size);	/* size starts out as PCI window size */
 	if (!rom || !size)
 		return -EIO;
-		
+
 	if (off >= size)
 		count = 0;
 	else {
 		if (off + count > size)
 			count = size - off;
-		
+
 		memcpy_fromio(buf, rom + off, count);
 	}
 	pci_unmap_rom(pdev, rom);
-		
+
 	return count;
 }
 

drivers/pci/pci.c

@@ -198,7 +198,7 @@ static int __pci_bus_find_cap_start(struct pci_bus *bus,
 }
 
 /**
- * pci_find_capability - query for devices' capabilities 
+ * pci_find_capability - query for devices' capabilities
  * @dev: PCI device to query
  * @cap: capability code
  *
@@ -207,12 +207,12 @@ static int __pci_bus_find_cap_start(struct pci_bus *bus,
  * device's PCI configuration space or 0 in case the device does not
  * support it.  Possible values for @cap:
  *
- *  %PCI_CAP_ID_PM           Power Management 
- *  %PCI_CAP_ID_AGP          Accelerated Graphics Port 
- *  %PCI_CAP_ID_VPD          Vital Product Data 
- *  %PCI_CAP_ID_SLOTID       Slot Identification 
+ *  %PCI_CAP_ID_PM           Power Management
+ *  %PCI_CAP_ID_AGP          Accelerated Graphics Port
+ *  %PCI_CAP_ID_VPD          Vital Product Data
+ *  %PCI_CAP_ID_SLOTID       Slot Identification
  *  %PCI_CAP_ID_MSI          Message Signalled Interrupts
- *  %PCI_CAP_ID_CHSWP        CompactPCI HotSwap 
+ *  %PCI_CAP_ID_CHSWP        CompactPCI HotSwap
  *  %PCI_CAP_ID_PCIX         PCI-X
  *  %PCI_CAP_ID_EXP          PCI Express
  */
@@ -228,13 +228,13 @@ int pci_find_capability(struct pci_dev *dev, int cap)
 }
 
 /**
- * pci_bus_find_capability - query for devices' capabilities 
+ * pci_bus_find_capability - query for devices' capabilities
  * @bus:   the PCI bus to query
  * @devfn: PCI device to query
  * @cap:   capability code
  *
  * Like pci_find_capability() but works for pci devices that do not have a
- * pci_dev structure set up yet. 
+ * pci_dev structure set up yet.
  *
  * Returns the address of the requested capability structure within the
  * device's PCI configuration space or 0 in case the device does not
@@ -515,7 +515,7 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
 		return -EINVAL;
 
 	/* Validate current state:
-	 * Can enter D0 from any state, but if we can only go deeper 
+	 * Can enter D0 from any state, but if we can only go deeper
 	 * to sleep if we're already in a low power state
 	 */
 	if (state != PCI_D0 && dev->current_state <= PCI_D3cold
@@ -998,7 +998,7 @@ static void pci_restore_config_space(struct pci_dev *pdev)
 	}
 }
 
-/** 
+/**
  * pci_restore_state - Restore the saved state of a PCI device
  * @dev: - PCI device that we're dealing with
  */
@@ -1030,7 +1030,7 @@ struct pci_saved_state {
  *			   the device saved state.
  * @dev: PCI device that we're dealing with
  *
- * Rerturn NULL if no state or error.
+ * Return NULL if no state or error.
  */
 struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev)
 {
@@ -1880,7 +1880,7 @@ int pci_finish_runtime_suspend(struct pci_dev *dev)
  * pci_dev_run_wake - Check if device can generate run-time wake-up events.
  * @dev: Device to check.
  *
- * Return true if the device itself is cabable of generating wake-up events
+ * Return true if the device itself is capable of generating wake-up events
  * (through the platform or using the native PCIe PME) or if the device supports
  * PME and one of its upstream bridges can generate wake-up events.
  */
@@ -2447,7 +2447,7 @@ bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags)
 	switch (pci_pcie_type(pdev)) {
 	/*
 	 * PCI/X-to-PCIe bridges are not specifically mentioned by the spec,
-	 * but since their primary inteface is PCI/X, we conservatively
+	 * but since their primary interface is PCI/X, we conservatively
 	 * handle them as we would a non-PCIe device.
 	 */
 	case PCI_EXP_TYPE_PCIE_BRIDGE:
@@ -2471,7 +2471,7 @@ bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags)
 	/*
 	 * PCIe 3.0, 6.12.1.2 specifies ACS capabilities that should be
 	 * implemented by the remaining PCIe types to indicate peer-to-peer
-	 * capabilities, but only when they are part of a multifunciton
+	 * capabilities, but only when they are part of a multifunction
 	 * device.  The footnote for section 6.12 indicates the specific
 	 * PCIe types included here.
 	 */
@@ -2486,7 +2486,7 @@ bool pci_acs_enabled(struct pci_dev *pdev, u16 acs_flags)
 	}
 
 	/*
-	 * PCIe 3.0, 6.12.1.3 specifies no ACS capabilties are applicable
+	 * PCIe 3.0, 6.12.1.3 specifies no ACS capabilities are applicable
 	 * to single function devices with the exception of downstream ports.
 	 */
 	return true;
@@ -2622,7 +2622,7 @@ void pci_release_region(struct pci_dev *pdev, int bar)
  *
  *	If @exclusive is set, then the region is marked so that userspace
  *	is explicitly not allowed to map the resource via /dev/mem or
- * 	sysfs MMIO access.
+ *	sysfs MMIO access.
  *
  *	Returns 0 on success, or %EBUSY on error.  A warning
  *	message is also printed on failure.
@@ -2634,7 +2634,7 @@ static int __pci_request_region(struct pci_dev *pdev, int bar, const char *res_n
 
 	if (pci_resource_len(pdev, bar) == 0)
 		return 0;
-		
+
 	if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) {
 		if (!request_region(pci_resource_start(pdev, bar),
 			    pci_resource_len(pdev, bar), res_name))
@@ -2694,7 +2694,7 @@ int pci_request_region(struct pci_dev *pdev, int bar, const char *res_name)
  *
  *	The key difference that _exclusive makes it that userspace is
  *	explicitly not allowed to map the resource via /dev/mem or
- * 	sysfs.
+ *	sysfs.
  */
 int pci_request_region_exclusive(struct pci_dev *pdev, int bar, const char *res_name)
 {
@@ -2799,7 +2799,7 @@ int pci_request_regions(struct pci_dev *pdev, const char *res_name)
  *	successfully.
  *
  *	pci_request_regions_exclusive() will mark the region so that
- * 	/dev/mem and the sysfs MMIO access will not be allowed.
+ *	/dev/mem and the sysfs MMIO access will not be allowed.
  *
  *	Returns 0 on success, or %EBUSY on error.  A warning
  *	message is also printed on failure.
@@ -2967,7 +2967,7 @@ pci_set_mwi(struct pci_dev *dev)
 		cmd |= PCI_COMMAND_INVALIDATE;
 		pci_write_config_word(dev, PCI_COMMAND, cmd);
 	}
-	
+
 	return 0;
 }
 
@@ -3292,7 +3292,7 @@ static int pci_af_flr(struct pci_dev *dev, int probe)
  *
  * NOTE: This causes the caller to sleep for twice the device power transition
  * cooldown period, which for the D0->D3hot and D3hot->D0 transitions is 10 ms
- * by devault (i.e. unless the @dev's d3_delay field has a different value).
+ * by default (i.e. unless the @dev's d3_delay field has a different value).
  * Moreover, only devices in D0 can be reset by this function.
  */
 static int pci_pm_reset(struct pci_dev *dev, int probe)
@@ -3341,7 +3341,7 @@ void pci_reset_bridge_secondary_bus(struct pci_dev *dev)
 	pci_write_config_word(dev, PCI_BRIDGE_CONTROL, ctrl);
 	/*
 	 * PCI spec v3.0 7.6.4.2 requires minimum Trst of 1ms.  Double
-	 * this to 2ms to ensure that we meet the minium requirement.
+	 * this to 2ms to ensure that we meet the minimum requirement.
 	 */
 	msleep(2);
 
@@ -3998,7 +3998,7 @@ int pcie_set_mps(struct pci_dev *dev, int mps)
 		return -EINVAL;
 
 	v = ffs(mps) - 8;
-	if (v > dev->pcie_mpss) 
+	if (v > dev->pcie_mpss)
 		return -EINVAL;
 	v <<= 5;
 

drivers/pci/pcie/aer/aerdrv_core.c

@@ -525,7 +525,7 @@ static void handle_error_source(struct pcie_device *aerdev,
 
 	if (info->severity == AER_CORRECTABLE) {
 		/*
-		 * Correctable error does not need software intevention.
+		 * Correctable error does not need software intervention.
 		 * No need to go through error recovery process.
 		 */
 		pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);

drivers/pci/pcie/aspm.c

@@ -548,7 +548,7 @@ static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev)
 
 /*
  * pcie_aspm_init_link_state: Initiate PCI express link state.
- * It is called after the pcie and its children devices are scaned.
+ * It is called after the pcie and its children devices are scanned.
  * @pdev: the root port or switch downstream port
  */
 void pcie_aspm_init_link_state(struct pci_dev *pdev)

drivers/pci/pcie/pme.c

@@ -419,8 +419,8 @@ static void pcie_pme_remove(struct pcie_device *srv)
 
 static struct pcie_port_service_driver pcie_pme_driver = {
 	.name		= "pcie_pme",
-	.port_type 	= PCI_EXP_TYPE_ROOT_PORT,
-	.service 	= PCIE_PORT_SERVICE_PME,
+	.port_type	= PCI_EXP_TYPE_ROOT_PORT,
+	.service	= PCIE_PORT_SERVICE_PME,
 
 	.probe		= pcie_pme_probe,
 	.suspend	= pcie_pme_suspend,

drivers/pci/pcie/portdrv.h

@@ -14,7 +14,7 @@
 #define PCIE_PORT_DEVICE_MAXSERVICES   4
 /*
  * According to the PCI Express Base Specification 2.0, the indices of
- * the MSI-X table entires used by port services must not exceed 31
+ * the MSI-X table entries used by port services must not exceed 31
  */
 #define PCIE_PORT_MAX_MSIX_ENTRIES	32
 

drivers/pci/pcie/portdrv_bus.c

@@ -18,8 +18,8 @@
 static int pcie_port_bus_match(struct device *dev, struct device_driver *drv);
 
 struct bus_type pcie_port_bus_type = {
-	.name 		= "pci_express",
-	.match 		= pcie_port_bus_match,
+	.name		= "pci_express",
+	.match		= pcie_port_bus_match,
 };
 EXPORT_SYMBOL_GPL(pcie_port_bus_type);
 

drivers/pci/pcie/portdrv_core.c

@@ -46,7 +46,7 @@ static void release_pcie_device(struct device *dev)
  * pcie_port_msix_add_entry - add entry to given array of MSI-X entries
  * @entries: Array of MSI-X entries
  * @new_entry: Index of the entry to add to the array
- * @nr_entries: Number of entries aleady in the array
+ * @nr_entries: Number of entries already in the array
  *
  * Return value: Position of the added entry in the array
  */

drivers/pci/pcie/portdrv_pci.c

@@ -390,9 +390,9 @@ static struct pci_driver pcie_portdriver = {
 	.probe		= pcie_portdrv_probe,
 	.remove		= pcie_portdrv_remove,
 
-	.err_handler 	= &pcie_portdrv_err_handler,
+	.err_handler	= &pcie_portdrv_err_handler,
 
-	.driver.pm 	= PCIE_PORTDRV_PM_OPS,
+	.driver.pm	= PCIE_PORTDRV_PM_OPS,
 };
 
 static int __init dmi_pcie_pme_disable_msi(const struct dmi_system_id *d)
@@ -412,7 +412,7 @@ static struct dmi_system_id __initdata pcie_portdrv_dmi_table[] = {
 	 .ident = "MSI Wind U-100",
 	 .matches = {
 		     DMI_MATCH(DMI_SYS_VENDOR,
-		     		"MICRO-STAR INTERNATIONAL CO., LTD"),
+				"MICRO-STAR INTERNATIONAL CO., LTD"),
 		     DMI_MATCH(DMI_PRODUCT_NAME, "U-100"),
 		     },
 	 },

drivers/pci/probe.c

@@ -582,7 +582,7 @@ static enum pci_bus_speed agp_speed(int agp3, int agpstat)
 		index = 1;
 	else
 		goto out;
-	
+
 	if (agp3) {
 		index += 2;
 		if (index == 5)
@@ -789,7 +789,7 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass)
 	}
 
 	/* Disable MasterAbortMode during probing to avoid reporting
-	   of bus errors (in some architectures) */ 
+	   of bus errors (in some architectures) */
 	pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl);
 	pci_write_config_word(dev, PCI_BRIDGE_CONTROL,
 			      bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT);
@@ -1005,7 +1005,7 @@ void set_pcie_hotplug_bridge(struct pci_dev *pdev)
  * pci_setup_device - fill in class and map information of a device
  * @dev: the device structure to fill
  *
- * Initialize the device structure with information about the device's 
+ * Initialize the device structure with information about the device's
  * vendor,class,memory and IO-space addresses,IRQ lines etc.
  * Called at initialisation of the PCI subsystem and by CardBus services.
  * Returns 0 on success and negative if unknown type of device (not normal,
@@ -1111,7 +1111,7 @@ int pci_setup_device(struct pci_dev *dev)
 			goto bad;
 		/* The PCI-to-PCI bridge spec requires that subtractive
 		   decoding (i.e. transparent) bridge must have programming
-		   interface code of 0x01. */ 
+		   interface code of 0x01. */
 		pci_read_irq(dev);
 		dev->transparent = ((dev->class & 0xff) == 1);
 		pci_read_bases(dev, 2, PCI_ROM_ADDRESS1);
@@ -1570,7 +1570,7 @@ static void pcie_write_mrrs(struct pci_dev *dev)
 	 * subsequent read will verify if the value is acceptable or not.
 	 * If the MRRS value provided is not acceptable (e.g., too large),
 	 * shrink the value until it is acceptable to the HW.
- 	 */
+	 */
 	while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) {
 		rc = pcie_set_readrq(dev, mrrs);
 		if (!rc)

drivers/pci/proc.c

@@ -222,7 +222,7 @@ static long proc_bus_pci_ioctl(struct file *file, unsigned int cmd,
 	default:
 		ret = -EINVAL;
 		break;
-	};
+	}
 
 	return ret;
 }

drivers/pci/remove.c

@@ -7,7 +7,7 @@ static void pci_free_resources(struct pci_dev *dev)
 {
 	int i;
 
- 	msi_remove_pci_irq_vectors(dev);
+	msi_remove_pci_irq_vectors(dev);
 
 	pci_cleanup_rom(dev);
 	for (i = 0; i < PCI_NUM_RESOURCES; i++) {

drivers/pci/search.c

 /*
- * 	PCI searching functions.
+ *	PCI searching functions.
  *
  *	Copyright (C) 1993 -- 1997 Drew Eckhardt, Frederic Potter,
  *					David Mosberger-Tang
@@ -96,12 +96,12 @@ struct pci_bus * pci_find_bus(int domain, int busnr)
  * pci_find_next_bus - begin or continue searching for a PCI bus
  * @from: Previous PCI bus found, or %NULL for new search.
  *
- * Iterates through the list of known PCI busses.  A new search is
+ * Iterates through the list of known PCI buses.  A new search is
  * initiated by passing %NULL as the @from argument.  Otherwise if
  * @from is not %NULL, searches continue from next device on the
  * global list.
  */
-struct pci_bus * 
+struct pci_bus *
 pci_find_next_bus(const struct pci_bus *from)
 {
 	struct list_head *n;
@@ -119,11 +119,11 @@ pci_find_next_bus(const struct pci_bus *from)
 /**
  * pci_get_slot - locate PCI device for a given PCI slot
  * @bus: PCI bus on which desired PCI device resides
- * @devfn: encodes number of PCI slot in which the desired PCI 
- * device resides and the logical device number within that slot 
+ * @devfn: encodes number of PCI slot in which the desired PCI
+ * device resides and the logical device number within that slot
  * in case of multi-function devices.
  *
- * Given a PCI bus and slot/function number, the desired PCI device 
+ * Given a PCI bus and slot/function number, the desired PCI device
  * is located in the list of PCI devices.
  * If the device is found, its reference count is increased and this
  * function returns a pointer to its data structure.  The caller must

drivers/pci/setup-bus.c

@@ -292,8 +292,8 @@ static void assign_requested_resources_sorted(struct list_head *head,
 				      (!(res->flags & IORESOURCE_ROM_ENABLE))))
 					add_to_list(fail_head,
 						    dev_res->dev, res,
-						    0 /* dont care */,
-						    0 /* dont care */);
+						    0 /* don't care */,
+						    0 /* don't care */);
 			}
 			reset_resource(res);
 		}
@@ -667,9 +667,9 @@ static void pci_bridge_check_ranges(struct pci_bus *bus)
 	if (!io) {
 		pci_write_config_word(bridge, PCI_IO_BASE, 0xf0f0);
 		pci_read_config_word(bridge, PCI_IO_BASE, &io);
- 		pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
- 	}
- 	if (io)
+		pci_write_config_word(bridge, PCI_IO_BASE, 0x0);
+	}
+	if (io)
 		b_res[0].flags |= IORESOURCE_IO;
 	/*  DECchip 21050 pass 2 errata: the bridge may miss an address
 	    disconnect boundary by one PCI data phase.
@@ -819,7 +819,7 @@ static void pbus_size_io(struct pci_bus *bus, resource_size_t min_size,
 	resource_size_t min_align, align;
 
 	if (!b_res)
- 		return;
+		return;
 
 	min_align = window_alignment(bus, IORESOURCE_IO);
 	list_for_each_entry(dev, &bus->devices, bus_list) {
@@ -950,7 +950,7 @@ static int pbus_size_mem(struct pci_bus *bus, unsigned long mask,
 			if (realloc_head && i >= PCI_IOV_RESOURCES &&
 					i <= PCI_IOV_RESOURCE_END) {
 				r->end = r->start - 1;
-				add_to_list(realloc_head, dev, r, r_size, 0/* dont' care */);
+				add_to_list(realloc_head, dev, r, r_size, 0/* don't care */);
 				children_add_size += r_size;
 				continue;
 			}
@@ -1456,8 +1456,8 @@ static enum enable_type pci_realloc_detect(struct pci_bus *bus,
 
 /*
  * first try will not touch pci bridge res
- * second  and later try will clear small leaf bridge res
- * will stop till to the max  deepth if can not find good one
+ * second and later try will clear small leaf bridge res
+ * will stop till to the max depth if can not find good one
  */
 void pci_assign_unassigned_root_bus_resources(struct pci_bus *bus)
 {

drivers/pci/setup-res.c

@@ -159,7 +159,7 @@ resource_size_t __weak pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx)
 	return 0;
 }
 
-static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev, 
+static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev,
 		int resno, resource_size_t size)
 {
 	struct resource *root, *conflict;

drivers/pci/slot.c

@@ -53,7 +53,7 @@ static ssize_t address_read_file(struct pci_slot *slot, char *buf)
 static const char *pci_bus_speed_strings[] = {
 	"33 MHz PCI",		/* 0x00 */
 	"66 MHz PCI",		/* 0x01 */
-	"66 MHz PCI-X", 	/* 0x02 */
+	"66 MHz PCI-X",		/* 0x02 */
 	"100 MHz PCI-X",	/* 0x03 */
 	"133 MHz PCI-X",	/* 0x04 */
 	NULL,			/* 0x05 */

drivers/pci/syscall.c

@@ -44,7 +44,7 @@ SYSCALL_DEFINE5(pciconfig_read, unsigned long, bus, unsigned long, dfn,
 	default:
 		err = -EINVAL;
 		goto error;
-	};
+	}
 
 	err = -EIO;
 	if (cfg_ret != PCIBIOS_SUCCESSFUL)

include/linux/msi.h

@@ -26,11 +26,11 @@ struct msi_desc {
 	struct {
 		__u8	is_msix	: 1;
 		__u8	multiple: 3;	/* log2 number of messages */
-		__u8	maskbit	: 1; 	/* mask-pending bit supported ?   */
-		__u8	is_64	: 1;	/* Address size: 0=32bit 1=64bit  */
-		__u8	pos;	 	/* Location of the msi capability */
-		__u16	entry_nr;    	/* specific enabled entry 	  */
-		unsigned default_irq;	/* default pre-assigned irq	  */
+		__u8	maskbit	: 1;	/* mask-pending bit supported ? */
+		__u8	is_64	: 1;	/* Address size: 0=32bit 1=64bit */
+		__u8	pos;		/* Location of the msi capability */
+		__u16	entry_nr;	/* specific enabled entry */
+		unsigned default_irq;	/* default pre-assigned irq */
 	} msi_attrib;
 
 	u32 masked;			/* mask bits */

include/linux/pci.h

@@ -32,7 +32,6 @@
 #include <linux/irqreturn.h>
 #include <uapi/linux/pci.h>
 
-/* Include the ID list */
 #include <linux/pci_ids.h>
 
 /*
@@ -42,9 +41,10 @@
  *
  *	7:3 = slot
  *	2:0 = function
- * PCI_DEVFN(), PCI_SLOT(), and PCI_FUNC() are defined uapi/linux/pci.h
+ *
+ * PCI_DEVFN(), PCI_SLOT(), and PCI_FUNC() are defined in uapi/linux/pci.h.
  * In the interest of not exposing interfaces to user-space unnecessarily,
- * the following kernel only defines are being added here.
+ * the following kernel-only defines are being added here.
  */
 #define PCI_DEVID(bus, devfn)  ((((u16)bus) << 8) | devfn)
 /* return bus from PCI devid = ((u16)bus_number) << 8) | devfn */
@@ -153,10 +153,10 @@ enum pcie_reset_state {
 	/* Reset is NOT asserted (Use to deassert reset) */
 	pcie_deassert_reset = (__force pcie_reset_state_t) 1,
 
-	/* Use #PERST to reset PCI-E device */
+	/* Use #PERST to reset PCIe device */
 	pcie_warm_reset = (__force pcie_reset_state_t) 2,
 
-	/* Use PCI-E Hot Reset to reset device */
+	/* Use PCIe Hot Reset to reset device */
 	pcie_hot_reset = (__force pcie_reset_state_t) 3
 };
 
@@ -259,13 +259,13 @@ struct pci_dev {
 	unsigned int	class;		/* 3 bytes: (base,sub,prog-if) */
 	u8		revision;	/* PCI revision, low byte of class word */
 	u8		hdr_type;	/* PCI header type (`multi' flag masked out) */
-	u8		pcie_cap;	/* PCI-E capability offset */
+	u8		pcie_cap;	/* PCIe capability offset */
 	u8		msi_cap;	/* MSI capability offset */
 	u8		msix_cap;	/* MSI-X capability offset */
-	u8		pcie_mpss:3;	/* PCI-E Max Payload Size Supported */
+	u8		pcie_mpss:3;	/* PCIe Max Payload Size Supported */
 	u8		rom_base_reg;	/* which config register controls the ROM */
-	u8		pin;  		/* which interrupt pin this device uses */
-	u16		pcie_flags_reg;	/* cached PCI-E Capabilities Register */
+	u8		pin;		/* which interrupt pin this device uses */
+	u16		pcie_flags_reg;	/* cached PCIe Capabilities Register */
 
 	struct pci_driver *driver;	/* which driver has allocated this device */
 	u64		dma_mask;	/* Mask of the bits of bus address this
@@ -300,7 +300,7 @@ struct pci_dev {
 	unsigned int	d3cold_delay;	/* D3cold->D0 transition time in ms */
 
 #ifdef CONFIG_PCIEASPM
-	struct pcie_link_state	*link_state;	/* ASPM link state. */
+	struct pcie_link_state	*link_state;	/* ASPM link state */
 #endif
 
 	pci_channel_state_t error_state;	/* current connectivity state */
@@ -317,7 +317,7 @@ struct pci_dev {
 
 	bool match_driver;		/* Skip attaching driver */
 	/* These fields are used by common fixups */
-	unsigned int	transparent:1;	/* Transparent PCI bridge */
+	unsigned int	transparent:1;	/* Subtractive decode PCI bridge */
 	unsigned int	multifunction:1;/* Part of multi-function device */
 	/* keep track of device state */
 	unsigned int	is_added:1;
@@ -326,7 +326,7 @@ struct pci_dev {
 	unsigned int	block_cfg_access:1;	/* config space access is blocked */
 	unsigned int	broken_parity_status:1;	/* Device generates false positive parity */
 	unsigned int	irq_reroute_variant:2;	/* device needs IRQ rerouting variant */
-	unsigned int 	msi_enabled:1;
+	unsigned int	msi_enabled:1;
 	unsigned int	msix_enabled:1;
 	unsigned int	ari_enabled:1;	/* ARI forwarding */
 	unsigned int	is_managed:1;
@@ -371,7 +371,6 @@ static inline struct pci_dev *pci_physfn(struct pci_dev *dev)
 	if (dev->is_virtfn)
 		dev = dev->physfn;
 #endif
-
 	return dev;
 }
 
@@ -456,7 +455,7 @@ struct pci_bus {
 	char		name[48];
 
 	unsigned short  bridge_ctl;	/* manage NO_ISA/FBB/et al behaviors */
-	pci_bus_flags_t bus_flags;	/* Inherited by child busses */
+	pci_bus_flags_t bus_flags;	/* inherited by child buses */
 	struct device		*bridge;
 	struct device		dev;
 	struct bin_attribute	*legacy_io; /* legacy I/O for this bus */
@@ -468,7 +467,7 @@ struct pci_bus {
 #define to_pci_bus(n)	container_of(n, struct pci_bus, dev)
 
 /*
- * Returns true if the pci bus is root (behind host-pci bridge),
+ * Returns true if the PCI bus is root (behind host-PCI bridge),
  * false otherwise
  *
  * Some code assumes that "bus->self == NULL" means that bus is a root bus.
@@ -510,7 +509,7 @@ static inline bool pci_dev_msi_enabled(struct pci_dev *pci_dev) { return false;
 #define PCIBIOS_BUFFER_TOO_SMALL	0x89
 
 /*
- * Translate above to generic errno for passing back through non-pci.
+ * Translate above to generic errno for passing back through non-PCI code.
  */
 static inline int pcibios_err_to_errno(int err)
 {
@@ -561,11 +560,12 @@ struct pci_dynids {
 	struct list_head list;      /* for IDs added at runtime */
 };
 
-/* ---------------------------------------------------------------- */
-/** PCI Error Recovery System (PCI-ERS).  If a PCI device driver provides
- *  a set of callbacks in struct pci_error_handlers, then that device driver
- *  will be notified of PCI bus errors, and will be driven to recovery
- *  when an error occurs.
+
+/*
+ * PCI Error Recovery System (PCI-ERS).  If a PCI device driver provides
+ * a set of callbacks in struct pci_error_handlers, that device driver
+ * will be notified of PCI bus errors, and will be driven to recovery
+ * when an error occurs.
  */
 
 typedef unsigned int __bitwise pci_ers_result_t;
@@ -609,7 +609,6 @@ struct pci_error_handlers {
 	void (*resume)(struct pci_dev *dev);
 };
 
-/* ---------------------------------------------------------------- */
 
 struct module;
 struct pci_driver {
@@ -713,10 +712,10 @@ extern enum pcie_bus_config_types pcie_bus_config;
 
 extern struct bus_type pci_bus_type;
 
-/* Do NOT directly access these two variables, unless you are arch specific pci
- * code, or pci core code. */
+/* Do NOT directly access these two variables, unless you are arch-specific PCI
+ * code, or PCI core code. */
 extern struct list_head pci_root_buses;	/* list of all known PCI buses */
-/* Some device drivers need know if pci is initiated */
+/* Some device drivers need know if PCI is initiated */
 int no_pci_devices(void);
 
 void pcibios_resource_survey_bus(struct pci_bus *bus);
@@ -724,7 +723,7 @@ void pcibios_add_bus(struct pci_bus *bus);
 void pcibios_remove_bus(struct pci_bus *bus);
 void pcibios_fixup_bus(struct pci_bus *);
 int __must_check pcibios_enable_device(struct pci_dev *, int mask);
-/* Architecture specific versions may override this (weak) */
+/* Architecture-specific versions may override this (weak) */
 char *pcibios_setup(char *str);
 
 /* Used only when drivers/pci/setup.c is used */
@@ -1258,7 +1257,7 @@ void pci_cfg_access_unlock(struct pci_dev *dev);
 
 /*
  * PCI domain support.  Sometimes called PCI segment (eg by ACPI),
- * a PCI domain is defined to be a set of PCI busses which share
+ * a PCI domain is defined to be a set of PCI buses which share
  * configuration space.
  */
 #ifdef CONFIG_PCI_DOMAINS
@@ -1672,7 +1671,7 @@ extern u8 pci_cache_line_size;
 extern unsigned long pci_hotplug_io_size;
 extern unsigned long pci_hotplug_mem_size;
 
-/* Architecture specific versions may override these (weak) */
+/* Architecture-specific versions may override these (weak) */
 int pcibios_add_platform_entries(struct pci_dev *dev);
 void pcibios_disable_device(struct pci_dev *dev);
 void pcibios_set_master(struct pci_dev *dev);

include/linux/pci_hotplug.h

@@ -39,8 +39,8 @@
  * @hardware_test: Called to run a specified hardware test on the specified
  * slot.
  * @get_power_status: Called to get the current power status of a slot.
- * 	If this field is NULL, the value passed in the struct hotplug_slot_info
- * 	will be used when this value is requested by a user.
+ *	If this field is NULL, the value passed in the struct hotplug_slot_info
+ *	will be used when this value is requested by a user.
  * @get_attention_status: Called to get the current attention status of a slot.
  *	If this field is NULL, the value passed in the struct hotplug_slot_info
  *	will be used when this value is requested by a user.
@@ -191,4 +191,3 @@ static inline int pci_get_hp_params(struct pci_dev *dev,
 
 void pci_configure_slot(struct pci_dev *dev);
 #endif
-

include/linux/pcieport_if.h

@@ -23,7 +23,7 @@
 #define PCIE_PORT_SERVICE_VC		(1 << PCIE_PORT_SERVICE_VC_SHIFT)
 
 struct pcie_device {
-	int 		irq;	    /* Service IRQ/MSI/MSI-X Vector */
+	int		irq;	    /* Service IRQ/MSI/MSI-X Vector */
 	struct pci_dev *port;	    /* Root/Upstream/Downstream Port */
 	u32		service;    /* Port service this device represents */
 	void		*priv_data; /* Service Private Data */