Commit f76a0b49 authored by John Garry's avatar John Garry Committed by Martin K. Petersen

hisi_sas: for v2 hw only set ITCT qw2 for SAS device

This patch fixes the ITCT table setup as it should be configured
differently for SAS and SATA devices.  For SATA disks there is no need
to set qw2 (already zeroed).  Also, link parameters for Bus inactive
limit, max connection time limit, and reject to open limit timers
parameters are changed to match global config register,
MAX_CON_TIME_LIMIT_TIME, as recommended by hw team.
Signed-off-by: default avatarJohn Garry <john.garry@huawei.com>
Reviewed-by: default avatarZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 11826e5d
......@@ -554,10 +554,11 @@ static void setup_itct_v2_hw(struct hisi_hba *hisi_hba,
itct->sas_addr = __swab64(itct->sas_addr);
/* qw2 */
if (!dev_is_sata(device))
itct->qw2 = cpu_to_le64((500ULL << ITCT_HDR_INLT_OFF) |
(0xff00ULL << ITCT_HDR_BITLT_OFF) |
(0xff00ULL << ITCT_HDR_MCTLT_OFF) |
(0xff00ULL << ITCT_HDR_RTOLT_OFF));
(0x1ULL << ITCT_HDR_BITLT_OFF) |
(0x32ULL << ITCT_HDR_MCTLT_OFF) |
(0x1ULL << ITCT_HDR_RTOLT_OFF));
}
static void free_device_v2_hw(struct hisi_hba *hisi_hba,
......@@ -715,7 +716,7 @@ static void init_reg_v2_hw(struct hisi_hba *hisi_hba)
hisi_sas_write32(hisi_hba, HGC_SAS_TX_OPEN_FAIL_RETRY_CTRL, 0x7FF);
hisi_sas_write32(hisi_hba, OPENA_WT_CONTI_TIME, 0x1);
hisi_sas_write32(hisi_hba, I_T_NEXUS_LOSS_TIME, 0x1F4);
hisi_sas_write32(hisi_hba, MAX_CON_TIME_LIMIT_TIME, 0x4E20);
hisi_sas_write32(hisi_hba, MAX_CON_TIME_LIMIT_TIME, 0x32);
hisi_sas_write32(hisi_hba, BUS_INACTIVE_LIMIT_TIME, 0x1);
hisi_sas_write32(hisi_hba, CFG_AGING_TIME, 0x1);
hisi_sas_write32(hisi_hba, HGC_ERR_STAT_EN, 0x1);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment