Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
  [ARM] Use new get_irqnr_preamble
  [ARM] Ensure machine class menu is sorted alphabetically
  [ARM] 4333/2: KS8695: Micrel Development board
  [ARM] 4332/2: KS8695: Serial driver
  [ARM] 4331/3: Support for Micrel/Kendin KS8695 processor
  [ARM] 4371/1: AT91: Support for Atmel AT91SAM9RL-EK development board
  [ARM] 4372/1: Define byte sizes in asm-arm/sizes.h
  [ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors.
  [ARM] Update mach-types
  [ARM] export symbol csum_partial_copy_from_user
  [ARM] iop13xx: msi support
  [ARM] stacktrace fix
  [ARM] Spinlock initializer cleanup
  [ARM] remove useless config option GENERIC_BUST_SPINLOCK
  [ARM] 4303/3: base kernel support for TI DaVinci
  [ARM] 4369/1: AT91: Fix circular dependency in header files
  [ARM] 4368/1: S3C24xx: build fix
  [ARM] 4364/1: AT91: LEDS on AT91SAM9261-EK
  [ARM] Fix iop32x/iop33x build
  [ARM] EBSA110: fix build errors caused by missing "const"
  ...

arch/arm/Kconfig

@@ -114,9 +114,6 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config GENERIC_BUST_SPINLOCK
-	bool
-
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 
@@ -247,6 +244,15 @@ config ARCH_IMX
 	help
 	  Support for Motorola's i.MX family of processors (MX1, MXL).
 
+config ARCH_IOP13XX
+	bool "IOP13xx-based"
+	depends on MMU
+	select PLAT_IOP
+	select PCI
+	select ARCH_SUPPORTS_MSI
+	help
+	  Support for Intel's IOP13XX (XScale) family of processors.
+
 config ARCH_IOP32X
 	bool "IOP32x-based"
 	depends on MMU
@@ -264,22 +270,12 @@ config ARCH_IOP33X
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
-config ARCH_IOP13XX
-	bool "IOP13xx-based"
+config ARCH_IXP23XX
+ 	bool "IXP23XX-based"
 	depends on MMU
-	select PLAT_IOP
  	select PCI
-	select ARCH_SUPPORTS_MSI
 	help
-	  Support for Intel's IOP13XX (XScale) family of processors.
-
-config ARCH_IXP4XX
-	bool "IXP4xx-based"
-	depends on MMU
-	select GENERIC_TIME
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Intel's IXP4XX (XScale) family of processors.
+	  Support for Intel's IXP23xx (XScale) family of processors.
 
 config ARCH_IXP2000
 	bool "IXP2400/2800-based"
@@ -288,12 +284,13 @@ config ARCH_IXP2000
 	help
 	  Support for Intel's IXP2400/2800 (XScale) family of processors.
 
-config ARCH_IXP23XX
- 	bool "IXP23XX-based"
+config ARCH_IXP4XX
+	bool "IXP4xx-based"
 	depends on MMU
- 	select PCI
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	help
-	  Support for Intel's IXP23xx (XScale) family of processors.
+	  Support for Intel's IXP4XX (XScale) family of processors.
 
 config ARCH_L7200
 	bool "LinkUp-L7200"
@@ -308,6 +305,12 @@ config ARCH_L7200
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_KS8695
+	bool "Micrel/Kendin KS8695"
+	help
+	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+	  System-on-Chip devices.
+
 config ARCH_NS9XXX
 	bool "NetSilicon NS9xxx"
 	help
@@ -354,7 +357,6 @@ config ARCH_SA1100
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
-	select GENERIC_TIME
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -377,6 +379,13 @@ config ARCH_LH7A40X
 	  core with a wide array of integrated devices for
 	  hand-held and low-power applications.
 
+config ARCH_DAVINCI
+	bool "TI DaVinci"
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	help
+	  Support for TI's DaVinci platform.
+
 config ARCH_OMAP
 	bool "TI OMAP"
 	select GENERIC_GPIO
@@ -445,6 +454,10 @@ source "arch/arm/mach-netx/Kconfig"
 
 source "arch/arm/mach-ns9xxx/Kconfig"
 
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
@@ -505,7 +518,7 @@ config ISA_DMA_API
 	bool
 
 config PCI
-	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX
+	bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
@@ -674,7 +687,8 @@ config LEDS
 		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
 		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
 		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
-		   ARCH_AT91 || MACH_TRIZEPS4
+		   ARCH_AT91 || MACH_TRIZEPS4 || ARCH_DAVINCI || \
+		   ARCH_KS8695
 	help
 	  If you say Y here, the LEDs on your machine will be used
 	  to provide useful information about your current system status.

arch/arm/Makefile

@@ -135,6 +135,8 @@ endif
  machine-$(CONFIG_ARCH_NETX)	   := netx
  machine-$(CONFIG_ARCH_NS9XXX)	   := ns9xxx
  textofs-$(CONFIG_ARCH_NS9XXX)	   := 0x00108000
+ machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
+ machine-$(CONFIG_ARCH_KS8695)     := ks8695
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.

arch/arm/kernel/armksyms.c

@@ -76,6 +76,7 @@ EXPORT_SYMBOL(__const_udelay);
 
 	/* networking */
 EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_from_user);
 EXPORT_SYMBOL(csum_partial_copy_nocheck);
 EXPORT_SYMBOL(__csum_ipv6_magic);
 

arch/arm/kernel/ecard.c

@@ -41,11 +41,11 @@
 #include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/kthread.h>
+#include <linux/io.h>
 
 #include <asm/dma.h>
 #include <asm/ecard.h>
 #include <asm/hardware.h>
-#include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/mach/irq.h>
@@ -958,6 +958,31 @@ void ecard_release_resources(struct expansion_card *ec)
 }
 EXPORT_SYMBOL(ecard_release_resources);
 
+void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data)
+{
+	ec->irq_data = irq_data;
+	barrier();
+	ec->ops = ops;
+}
+EXPORT_SYMBOL(ecard_setirq);
+
+void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
+			   unsigned long offset, unsigned long maxsize)
+{
+	unsigned long start = ecard_resource_start(ec, res);
+	unsigned long end = ecard_resource_end(ec, res);
+
+	if (offset > (end - start))
+		return NULL;
+
+	start += offset;
+	if (maxsize && end - start > maxsize)
+		end = start + maxsize;
+	
+	return devm_ioremap(&ec->dev, start, end - start);
+}
+EXPORT_SYMBOL(ecardm_iomap);
+
 /*
  * Probe for an expansion card.
  *
@@ -1133,6 +1158,14 @@ static int ecard_drv_remove(struct device *dev)
 	drv->remove(ec);
 	ecard_release(ec);
 
+	/*
+	 * Restore the default operations.  We ensure that the
+	 * ops are set before we change the data.
+	 */
+	ec->ops = &ecard_default_ops;
+	barrier();
+	ec->irq_data = NULL;
+
 	return 0;
 }
 

arch/arm/kernel/stacktrace.c

@@ -52,21 +52,15 @@ static int save_trace(struct stackframe *frame, void *d)
 	return trace->nr_entries >= trace->max_entries;
 }
 
-void save_stack_trace(struct stack_trace *trace, struct task_struct *task)
+void save_stack_trace(struct stack_trace *trace)
 {
 	struct stack_trace_data data;
 	unsigned long fp, base;
 
 	data.trace = trace;
 	data.skip = trace->skip;
-
-	if (task) {
-		base = (unsigned long)task_stack_page(task);
-		fp = 0; /* FIXME */
-	} else {
 	base = (unsigned long)task_stack_page(current);
 	asm("mov %0, fp" : "=r" (fp));
-	}
 
 	walk_stackframe(fp, base, base + THREAD_SIZE, save_trace, &data);
 }

arch/arm/kernel/time.c

@@ -512,7 +512,7 @@ void __init time_init(void)
 
 #ifdef CONFIG_NO_IDLE_HZ
 	if (system_timer->dyn_tick)
-		system_timer->dyn_tick->lock = SPIN_LOCK_UNLOCKED;
+		spin_lock_init(&system_timer->dyn_tick->lock);
 #endif
 }
 

arch/arm/mach-at91/Kconfig

@@ -17,6 +17,9 @@ config ARCH_AT91SAM9261
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 
+config ARCH_AT91SAM9RL
+	bool "AT91SAM9RL"
+
 endchoice
 
 # ----------------------------------------------------------
@@ -152,6 +155,20 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9RL
+
+comment "AT91SAM9RL Board Type"
+
+config MACH_AT91SAM9RLEK
+	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9RL
+	help
+	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
+
+endif
+
+# ----------------------------------------------------------
+
 comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD

arch/arm/mach-at91/Makefile

@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devic
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o
+obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o
 
 # AT91RM9200 board-specific support
 obj-$(CONFIG_MACH_ONEARM)	+= board-1arm.o
@@ -36,9 +37,13 @@ obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
 
+# AT91SAM9RL board-specific support
+obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
+
 # LEDs support
 led-$(CONFIG_ARCH_AT91RM9200DK)	+= leds.o
 led-$(CONFIG_MACH_AT91RM9200EK)	+= leds.o
+led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o
 led-$(CONFIG_MACH_CSB337)	+= leds.o
 led-$(CONFIG_MACH_CSB637)	+= leds.o
 led-$(CONFIG_MACH_KB9200)	+= leds.o

arch/arm/mach-at91/at91rm9200_devices.c

@@ -22,9 +22,6 @@
 
 #include "generic.h"
 
-#define SZ_512	0x00000200
-#define SZ_256	0x00000100
-#define SZ_16	0x00000010
 
 /* --------------------------------------------------------------------
  *  USB Host

arch/arm/mach-at91/at91sam9260_devices.c

@@ -22,9 +22,6 @@
 
 #include "generic.h"
 
-#define SZ_512	0x00000200
-#define SZ_256	0x00000100
-#define SZ_16	0x00000010
 
 /* --------------------------------------------------------------------
  *  USB Host

arch/arm/mach-at91/at91sam9261_devices.c

@@ -23,9 +23,6 @@
 
 #include "generic.h"
 
-#define SZ_512	0x00000200
-#define SZ_256	0x00000100
-#define SZ_16	0x00000010
 
 /* --------------------------------------------------------------------
  *  USB Host

arch/arm/mach-at91/at91sam9263_devices.c

@@ -22,9 +22,6 @@
 
 #include "generic.h"
 
-#define SZ_512	0x00000200
-#define SZ_256	0x00000100
-#define SZ_16	0x00000010
 
 /* --------------------------------------------------------------------
  *  USB Host

arch/arm/mach-at91/at91sam9rl.c

+/*
+ * arch/arm/mach-at91/at91sam9rl.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/module.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/at91sam9rl.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+
+#include "generic.h"
+#include "clock.h"
+
+static struct map_desc at91sam9rl_io_desc[] __initdata = {
+	{
+		.virtual	= AT91_VA_BASE_SYS,
+		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc at91sam9rl_sram_desc[] __initdata = {
+	{
+		.pfn		= __phys_to_pfn(AT91SAM9RL_SRAM_BASE),
+		.type		= MT_DEVICE,
+	}
+};
+
+/* --------------------------------------------------------------------
+ *  Clocks
+ * -------------------------------------------------------------------- */
+
+/*
+ * The peripheral clocks.
+ */
+static struct clk pioA_clk = {
+	.name		= "pioA_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioB_clk = {
+	.name		= "pioB_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOB,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioC_clk = {
+	.name		= "pioC_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pioD_clk = {
+	.name		= "pioD_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_PIOD,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart0_clk = {
+	.name		= "usart0_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_US0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart1_clk = {
+	.name		= "usart1_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_US1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart2_clk = {
+	.name		= "usart2_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_US2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk usart3_clk = {
+	.name		= "usart3_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_US3,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk mmc_clk = {
+	.name		= "mci_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_MCI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi0_clk = {
+	.name		= "twi0_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_TWI0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk twi1_clk = {
+	.name		= "twi1_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_TWI1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk spi_clk = {
+	.name		= "spi_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_SPI,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc0_clk = {
+	.name		= "ssc0_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_SSC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ssc1_clk = {
+	.name		= "ssc1_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_SSC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc0_clk = {
+	.name		= "tc0_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_TC0,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc1_clk = {
+	.name		= "tc1_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_TC1,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tc2_clk = {
+	.name		= "tc2_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_TC2,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk pwmc_clk = {
+	.name		= "pwmc_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_PWMC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk tsc_clk = {
+	.name		= "tsc_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_TSC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk dma_clk = {
+	.name		= "dma_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_DMA,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk udphs_clk = {
+	.name		= "udphs_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_UDPHS,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk lcdc_clk = {
+	.name		= "lcdc_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_LCDC,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+static struct clk ac97_clk = {
+	.name		= "ac97_clk",
+	.pmc_mask	= 1 << AT91SAM9RL_ID_AC97C,
+	.type		= CLK_TYPE_PERIPHERAL,
+};
+
+static struct clk *periph_clocks[] __initdata = {
+	&pioA_clk,
+	&pioB_clk,
+	&pioC_clk,
+	&pioD_clk,
+	&usart0_clk,
+	&usart1_clk,
+	&usart2_clk,
+	&usart3_clk,
+	&mmc_clk,
+	&twi0_clk,
+	&twi1_clk,
+	&spi_clk,
+	&ssc0_clk,
+	&ssc1_clk,
+	&tc0_clk,
+	&tc1_clk,
+	&tc2_clk,
+	&pwmc_clk,
+	&tsc_clk,
+	&dma_clk,
+	&udphs_clk,
+	&lcdc_clk,
+	&ac97_clk,
+	// irq0
+};
+
+/*
+ * The two programmable clocks.
+ * You must configure pin multiplexing to bring these signals out.
+ */
+static struct clk pck0 = {
+	.name		= "pck0",
+	.pmc_mask	= AT91_PMC_PCK0,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 0,
+};
+static struct clk pck1 = {
+	.name		= "pck1",
+	.pmc_mask	= AT91_PMC_PCK1,
+	.type		= CLK_TYPE_PROGRAMMABLE,
+	.id		= 1,
+};
+
+static void __init at91sam9rl_register_clocks(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
+		clk_register(periph_clocks[i]);
+
+	clk_register(&pck0);
+	clk_register(&pck1);
+}
+
+/* --------------------------------------------------------------------
+ *  GPIO
+ * -------------------------------------------------------------------- */
+
+static struct at91_gpio_bank at91sam9rl_gpio[] = {
+	{
+		.id		= AT91SAM9RL_ID_PIOA,
+		.offset		= AT91_PIOA,
+		.clock		= &pioA_clk,
+	}, {
+		.id		= AT91SAM9RL_ID_PIOB,
+		.offset		= AT91_PIOB,
+		.clock		= &pioB_clk,
+	}, {
+		.id		= AT91SAM9RL_ID_PIOC,
+		.offset		= AT91_PIOC,
+		.clock		= &pioC_clk,
+	}, {
+		.id		= AT91SAM9RL_ID_PIOD,
+		.offset		= AT91_PIOD,
+		.clock		= &pioD_clk,
+	}
+};
+
+static void at91sam9rl_reset(void)
+{
+	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
+}
+
+
+/* --------------------------------------------------------------------
+ *  AT91SAM9RL processor initialization
+ * -------------------------------------------------------------------- */
+
+void __init at91sam9rl_initialize(unsigned long main_clock)
+{
+	unsigned long cidr, sram_size;
+
+	/* Map peripherals */
+	iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc));
+
+	cidr = at91_sys_read(AT91_DBGU_CIDR);
+
+	switch (cidr & AT91_CIDR_SRAMSIZ) {
+		case AT91_CIDR_SRAMSIZ_32K:
+			sram_size = 2 * SZ_16K;
+			break;
+		case AT91_CIDR_SRAMSIZ_16K:
+		default:
+			sram_size = SZ_16K;
+	}
+
+	at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size;
+	at91sam9rl_sram_desc->length = sram_size;
+
+	/* Map SRAM */
+	iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc));
+
+	at91_arch_reset = at91sam9rl_reset;
+	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
+
+	/* Init clock subsystem */
+	at91_clock_init(main_clock);
+
+	/* Register the processor-specific clocks */
+	at91sam9rl_register_clocks();
+
+	/* Register GPIO subsystem */
+	at91_gpio_init(at91sam9rl_gpio, 4);
+}
+
+/* --------------------------------------------------------------------
+ *  Interrupt initialization
+ * -------------------------------------------------------------------- */
+
+/*
+ * The default interrupt priority levels (0 = lowest, 7 = highest).
+ */
+static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
+	7,	/* Advanced Interrupt Controller */
+	7,	/* System Peripherals */
+	1,	/* Parallel IO Controller A */
+	1,	/* Parallel IO Controller B */
+	1,	/* Parallel IO Controller C */
+	1,	/* Parallel IO Controller D */
+	5,	/* USART 0 */
+	5,	/* USART 1 */
+	5,	/* USART 2 */
+	5,	/* USART 3 */
+	0,	/* Multimedia Card Interface */
+	6,	/* Two-Wire Interface 0 */
+	6,	/* Two-Wire Interface 1 */
+	5,	/* Serial Peripheral Interface */
+	4,	/* Serial Synchronous Controller 0 */
+	4,	/* Serial Synchronous Controller 1 */
+	0,	/* Timer Counter 0 */
+	0,	/* Timer Counter 1 */
+	0,	/* Timer Counter 2 */
+	0,
+	0,	/* Touch Screen Controller */
+	0,	/* DMA Controller */
+	2,	/* USB Device High speed port */
+	2,	/* LCD Controller */
+	6,	/* AC97 Controller */
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,
+	0,	/* Advanced Interrupt Controller */
+};
+
+void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS])
+{
+	if (!priority)
+		priority = at91sam9rl_default_irq_priority;
+
+	/* Initialize the AIC interrupt controller */
+	at91_aic_init(priority);
+
+	/* Enable GPIO interrupts */
+	at91_gpio_irq_setup();
+}

arch/arm/mach-at91/board-sam9261ek.c

@@ -60,6 +60,9 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9261_initialize(18432000);
 
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
+
 	/* Setup the serial ports and console */
 	at91_init_serial(&ek_uart_config);
 }

arch/arm/mach-at91/board-sam9rlek.c

+/*
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/clk.h>
+
+#include <video/atmel_lcdc.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/at91sam926x_mc.h>
+
+#include "generic.h"
+
+
+/*
+ * Serial port configuration.
+ *    0 .. 3 = USART0 .. USART3
+ *    4      = DBGU
+ */
+static struct at91_uart_config __initdata ek_uart_config = {
+	.console_tty	= 0,				/* ttyS0 */
+	.nr_tty		= 2,
+	.tty_map	= { 4, 0, -1, -1, -1 }		/* ttyS0, ..., ttyS4 */
+};
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 12.000 MHz crystal */
+	at91sam9rl_initialize(12000000);
+
+	/* Setup the serial ports and console */
+	at91_init_serial(&ek_uart_config);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9rl_init_interrupts(NULL);
+}
+
+
+/*
+ * MCI (SD/MMC)
+ */
+static struct at91_mmc_data __initdata ek_mmc_data = {
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PA15,
+//	.wp_pin		= ... not connected
+//	.vcc_pin	= ... not connected
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "Partition 1",
+		.offset	= 0,
+		.size	= 256 * 1024,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= 256 * 1024 ,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct at91_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PD17,
+	.enable_pin	= AT91_PIN_PB6,
+	.partition_info	= nand_partitions,
+	.bus_width_16	= 0,
+};
+
+
+/*
+ * SPI devices
+ */
+static struct spi_board_info ek_spi_devices[] = {
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+};
+
+
+/*
+ * LCD Controller
+ */
+#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
+static struct fb_videomode at91_tft_vga_modes[] = {
+	{
+		.name		= "TX09D50VM1CCA @ 60",
+		.refresh	= 60,
+		.xres		= 240,		.yres		= 320,
+		.pixclock	= KHZ2PICOS(4965),
+
+		.left_margin	= 1,		.right_margin	= 33,
+		.upper_margin	= 1,		.lower_margin	= 0,
+		.hsync_len	= 5,		.vsync_len	= 1,
+
+		.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+		.vmode		= FB_VMODE_NONINTERLACED,
+	},
+};
+
+static struct fb_monspecs at91fb_default_monspecs = {
+	.manufacturer	= "HIT",
+	.monitor	= "TX09D50VM1CCA",
+
+	.modedb		= at91_tft_vga_modes,
+	.modedb_len	= ARRAY_SIZE(at91_tft_vga_modes),
+	.hfmin		= 15000,
+	.hfmax		= 64000,
+	.vfmin		= 50,
+	.vfmax		= 150,
+};
+
+#define AT91SAM9RL_DEFAULT_LCDCON2	(ATMEL_LCDC_MEMOR_LITTLE \
+					| ATMEL_LCDC_DISTYPE_TFT \
+					| ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
+
+static void at91_lcdc_power_control(int on)
+{
+	if (on)
+		at91_set_gpio_value(AT91_PIN_PA30, 0);	/* power up */
+	else
+		at91_set_gpio_value(AT91_PIN_PA30, 1);	/* power down */
+}
+
+/* Driver datas */
+static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
+	.default_bpp			= 16,
+	.default_dmacon			= ATMEL_LCDC_DMAEN,
+	.default_lcdcon2		= AT91SAM9RL_DEFAULT_LCDCON2,
+	.default_monspecs		= &at91fb_default_monspecs,
+	.atmel_lcdfb_power_control	= at91_lcdc_power_control,
+	.guard_time			= 1,
+};
+
+#else
+static struct atmel_lcdfb_info __initdata ek_lcdc_data;
+#endif
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* I2C */
+	at91_add_device_i2c();
+	/* NAND */
+	at91_add_device_nand(&ek_nand_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* MMC */
+	at91_add_device_mmc(0, &ek_mmc_data);
+	/* LCD Controller */
+	at91_add_device_lcdc(&ek_lcdc_data);
+}
+
+MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
+	/* Maintainer: Atmel */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END

arch/arm/mach-at91/generic.h

@@ -13,12 +13,14 @@ extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned shor
 extern void __init at91sam9260_initialize(unsigned long main_clock);
 extern void __init at91sam9261_initialize(unsigned long main_clock);
 extern void __init at91sam9263_initialize(unsigned long main_clock);
+extern void __init at91sam9rl_initialize(unsigned long main_clock);
 
  /* Interrupts */
 extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9260_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9261_init_interrupts(unsigned int priority[]);
 extern void __init at91sam9263_init_interrupts(unsigned int priority[]);
+extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
 extern void __init at91_aic_init(unsigned int priority[]);
 
  /* Timer */

arch/arm/mach-davinci/Kconfig

+if ARCH_DAVINCI
+
+menu "TI DaVinci Implementations"
+
+comment "DaVinci Core Type"
+
+config ARCH_DAVINCI644x
+	default y
+	bool "DaVinci 644x based system"
+
+comment "DaVinci Board Type"
+
+config MACH_DAVINCI_EVM
+	bool "TI DaVinci EVM"
+	default y
+	depends on ARCH_DAVINCI644x
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a DaVinci EVM
+
+endmenu
+
+endif

arch/arm/mach-davinci/Makefile

+#
+# Makefile for the linux kernel.
+#
+#
+
+# Common objects
+obj-y 			:= time.o irq.o serial.o io.o id.o psc.o
+
+# Board specific
+obj-$(CONFIG_MACH_DAVINCI_EVM)  += board-evm.o

arch/arm/mach-davinci/Makefile.boot

+   zreladdr-y	:= 0x80008000
+params_phys-y	:= 0x80000100
+initrd_phys-y	:= 0x80800000

arch/arm/mach-davinci/board-evm.c

+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/hardware.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <asm/arch/common.h>
+
+/* other misc. init functions */
+void __init davinci_psc_init(void);
+void __init davinci_irq_init(void);
+void __init davinci_map_common_io(void);
+
+/* NOR Flash base address set to CS0 by default */
+#define NOR_FLASH_PHYS 0x02000000
+
+static struct mtd_partition davinci_evm_partitions[] = {
+	/* bootloader (U-Boot, etc) in first 4 sectors */
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 4 * SZ_64K,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	},
+	/* bootloader params in the next 1 sectors */
+	{
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_64K,
+		.mask_flags	= 0,
+	},
+	/* kernel */
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M,
+		.mask_flags	= 0
+	},
+	/* file system */
+	{
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data davinci_evm_flash_data = {
+	.width		= 2,
+	.parts		= davinci_evm_partitions,
+	.nr_parts	= ARRAY_SIZE(davinci_evm_partitions),
+};
+
+/* NOTE: CFI probe will correctly detect flash part as 32M, but EMIF
+ * limits addresses to 16M, so using addresses past 16M will wrap */
+static struct resource davinci_evm_flash_resource = {
+	.start		= NOR_FLASH_PHYS,
+	.end		= NOR_FLASH_PHYS + SZ_16M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device davinci_evm_flash_device = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &davinci_evm_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &davinci_evm_flash_resource,
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+	&davinci_evm_flash_device,
+};
+
+static void __init
+davinci_evm_map_io(void)
+{
+	davinci_map_common_io();
+}
+
+static __init void davinci_evm_init(void)
+{
+	davinci_psc_init();
+
+#if defined(CONFIG_BLK_DEV_DAVINCI) || defined(CONFIG_BLK_DEV_DAVINCI_MODULE)
+	printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
+	       "but share pins.\n\t Disable IDE for NOR support.\n");
+#endif
+
+	platform_add_devices(davinci_evm_devices,
+			     ARRAY_SIZE(davinci_evm_devices));
+}
+
+static __init void davinci_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
+	/* Maintainer: MontaVista Software <source@mvista.com> */
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (io_p2v(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
+	.map_io	      = davinci_evm_map_io,
+	.init_irq     = davinci_evm_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = davinci_evm_init,
+MACHINE_END

arch/arm/mach-davinci/id.c

+/*
+ * Davinci CPU identification code
+ *
+ * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * Derived from OMAP1 CPU identification code.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+#define JTAG_ID_BASE		0x01c40028
+
+struct davinci_id {
+	u8	variant;	/* JTAG ID bits 31:28 */
+	u16	part_no;	/* JTAG ID bits 27:12 */
+	u32	manufacturer;	/* JTAG ID bits 11:1 */
+	u32	type;		/* Cpu id bits [31:8], cpu class bits [7:0] */
+};
+
+/* Register values to detect the DaVinci version */
+static struct davinci_id davinci_ids[] __initdata = {
+	{
+		/* DM6446 */
+		.part_no      = 0xb700,
+		.variant      = 0x0,
+		.manufacturer = 0x017,
+		.type	      = 0x64460000,
+	},
+};
+
+/*
+ * Get Device Part No. from JTAG ID register
+ */
+static u16 __init davinci_get_part_no(void)
+{
+	u32 dev_id, part_no;
+
+	dev_id = davinci_readl(JTAG_ID_BASE);
+
+	part_no = ((dev_id >> 12) & 0xffff);
+
+	return part_no;
+}
+
+/*
+ * Get Device Revision from JTAG ID register
+ */
+static u8 __init davinci_get_variant(void)
+{
+	u32 variant;
+
+	variant = davinci_readl(JTAG_ID_BASE);
+
+	variant = (variant >> 28) & 0xf;
+
+	return variant;
+}
+
+void __init davinci_check_revision(void)
+{
+	int i;
+	u16 part_no;
+	u8 variant;
+
+	part_no = davinci_get_part_no();
+	variant = davinci_get_variant();
+
+	/* First check only the major version in a safe way */
+	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
+		if (part_no == (davinci_ids[i].part_no)) {
+			system_rev = davinci_ids[i].type;
+			break;
+		}
+	}
+
+	/* Check if we can find the dev revision */
+	for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
+		if (part_no == davinci_ids[i].part_no &&
+		    variant == davinci_ids[i].variant) {
+			system_rev = davinci_ids[i].type;
+			break;
+		}
+	}
+
+	printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
+}

arch/arm/mach-davinci/io.c

+/*
+ * DaVinci I/O mapping code
+ *
+ * Copyright (C) 2005-2006 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/tlb.h>
+#include <asm/io.h>
+#include <asm/memory.h>
+
+#include <asm/mach/map.h>
+
+extern void davinci_check_revision(void);
+
+/*
+ * The machine specific code may provide the extra mapping besides the
+ * default mapping provided here.
+ */
+static struct map_desc davinci_io_desc[] __initdata = {
+	{
+		.virtual	= IO_VIRT,
+		.pfn		= __phys_to_pfn(IO_PHYS),
+		.length		= IO_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+void __init davinci_map_common_io(void)
+{
+	iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc));
+
+	/* Normally devicemaps_init() would flush caches and tlb after
+	 * mdesc->map_io(), but we must also do it here because of the CPU
+	 * revision check below.
+	 */
+	local_flush_tlb_all();
+	flush_cache_all();
+
+	/* We want to check CPU revision early for cpu_is_xxxx() macros.
+	 * IO space mapping must be initialized before we can do that.
+	 */
+	davinci_check_revision();
+}

arch/arm/mach-ebsa110/io.c

@@ -102,7 +102,7 @@ EXPORT_SYMBOL(__readb);
 EXPORT_SYMBOL(__readw);
 EXPORT_SYMBOL(__readl);
 
-void readsw(void __iomem *addr, void *data, int len)
+void readsw(const void __iomem *addr, void *data, int len)
 {
 	void __iomem *a = __isamem_convert_addr(addr);
 
@@ -112,7 +112,7 @@ void readsw(void __iomem *addr, void *data, int len)
 }
 EXPORT_SYMBOL(readsw);
 
-void readsl(void __iomem *addr, void *data, int len)
+void readsl(const void __iomem *addr, void *data, int len)
 {
 	void __iomem *a = __isamem_convert_addr(addr);
 
@@ -157,7 +157,7 @@ EXPORT_SYMBOL(__writeb);
 EXPORT_SYMBOL(__writew);
 EXPORT_SYMBOL(__writel);
 
-void writesw(void __iomem *addr, void *data, int len)
+void writesw(void __iomem *addr, const void *data, int len)
 {
 	void __iomem *a = __isamem_convert_addr(addr);
 
@@ -167,7 +167,7 @@ void writesw(void __iomem *addr, void *data, int len)
 }
 EXPORT_SYMBOL(writesw);
 
-void writesl(void __iomem *addr, void *data, int len)
+void writesl(void __iomem *addr, const void *data, int len)
 {
 	void __iomem *a = __isamem_convert_addr(addr);
 

arch/arm/mach-iop13xx/Makefile

@@ -10,3 +10,4 @@ obj-$(CONFIG_ARCH_IOP13XX) += io.o
 obj-$(CONFIG_ARCH_IOP13XX) += tpmi.o
 obj-$(CONFIG_MACH_IQ81340SC) += iq81340sc.o
 obj-$(CONFIG_MACH_IQ81340MC) += iq81340mc.o
+obj-$(CONFIG_PCI_MSI) += msi.o

arch/arm/mach-iop13xx/irq.c

@@ -26,6 +26,7 @@
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/arch/irqs.h>
+#include <asm/arch/msi.h>
 
 /* INTCTL0 CP6 R0 Page 4
  */
@@ -258,7 +259,7 @@ void __init iop13xx_init_irq(void)
 	write_intbase(INTBASE);
 	write_intsize(INTSIZE_4);
 
-	for(i = 0; i < NR_IOP13XX_IRQS; i++) {
+	for(i = 0; i <= IRQ_IOP13XX_HPI; i++) {
 		if (i < 32)
 			set_irq_chip(i, &iop13xx_irqchip1);
 		else if (i < 64)
@@ -271,4 +272,6 @@ void __init iop13xx_init_irq(void)
 		set_irq_handler(i, handle_level_irq);
 		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
 	}
+
+	iop13xx_msi_init();
 }

arch/arm/mach-iop13xx/pci.c

@@ -559,6 +559,14 @@ void __init iop13xx_atue_setup(void)
 	int func = iop13xx_atu_function(IOP13XX_INIT_ATU_ATUE);
 	u32 reg_val;
 
+#ifdef CONFIG_PCI_MSI
+	/* BAR 0 (inbound msi window) */
+	__raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
+	__raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUE_IALR0);
+	__raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUE_IATVR0);
+	__raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUE_IABAR0);
+#endif
+
 	/* BAR 1 (1:1 mapping with Physical RAM) */
 	/* Set limit and enable */
 	__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,
@@ -720,6 +728,14 @@ void __init iop13xx_atux_setup(void)
 	else
 		atux_trhfa_timeout = jiffies;
 
+#ifdef CONFIG_PCI_MSI
+	/* BAR 0 (inbound msi window) */
+	__raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_MU_MUBAR);
+	__raw_writel(~(IOP13XX_MU_WINDOW_SIZE - 1), IOP13XX_ATUX_IALR0);
+	__raw_writel(IOP13XX_MU_BASE_PHYS, IOP13XX_ATUX_IATVR0);
+	__raw_writel(IOP13XX_MU_BASE_PCI, IOP13XX_ATUX_IABAR0);
+#endif
+
 	/* BAR 1 (1:1 mapping with Physical RAM) */
 	/* Set limit and enable */
 	__raw_writel(~(IOP13XX_MAX_RAM_SIZE - PHYS_OFFSET - 1) & ~0x1,

drivers/serial/Makefile

@@ -61,3 +61,4 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
 obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
 obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
+obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o