Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-next

Marc Kleine-Budde says:

====================
this is pull request is for net-next. Contains a patch by Andreas
Larsson, which enables the sja1000 of driver to work under sparc.
AnilKumar Ch contributed a patch to improve the c_can support under
omap, Olivier Sobrie's patch brings support for the CAN/USB dongles
from Kvaser. In a bunch of patches by me missing MODULE_ALIAS and/or
MODULE_DEVICE_TABLE entries were added to the CAN drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/can/at91_can.c

@@ -1372,6 +1372,7 @@ static const struct platform_device_id at91_can_id_table[] = {
 		/* sentinel */
 	}
 };
+MODULE_DEVICE_TABLE(platform, at91_can_id_table);
 
 static struct platform_driver at91_can_driver = {
 	.probe = at91_can_probe,

drivers/net/can/bfin_can.c

@@ -691,3 +691,4 @@ module_platform_driver(bfin_can_driver);
 MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Blackfin on-chip CAN netdevice driver");
+MODULE_ALIAS("platform:" DRV_NAME);

drivers/net/can/c_can/c_can.c

@@ -233,6 +233,12 @@ static inline void c_can_pm_runtime_put_sync(const struct c_can_priv *priv)
 		pm_runtime_put_sync(priv->device);
 }
 
+static inline void c_can_reset_ram(const struct c_can_priv *priv, bool enable)
+{
+	if (priv->raminit)
+		priv->raminit(priv, enable);
+}
+
 static inline int get_tx_next_msg_obj(const struct c_can_priv *priv)
 {
 	return (priv->tx_next & C_CAN_NEXT_MSG_OBJ_MASK) +
@@ -1090,6 +1096,7 @@ static int c_can_open(struct net_device *dev)
 	struct c_can_priv *priv = netdev_priv(dev);
 
 	c_can_pm_runtime_get_sync(priv);
+	c_can_reset_ram(priv, true);
 
 	/* open the can device */
 	err = open_candev(dev);
@@ -1118,6 +1125,7 @@ static int c_can_open(struct net_device *dev)
 exit_irq_fail:
 	close_candev(dev);
 exit_open_fail:
+	c_can_reset_ram(priv, false);
 	c_can_pm_runtime_put_sync(priv);
 	return err;
 }
@@ -1131,6 +1139,8 @@ static int c_can_close(struct net_device *dev)
 	c_can_stop(dev);
 	free_irq(dev->irq, dev);
 	close_candev(dev);
+
+	c_can_reset_ram(priv, false);
 	c_can_pm_runtime_put_sync(priv);
 
 	return 0;
@@ -1188,6 +1198,7 @@ int c_can_power_down(struct net_device *dev)
 
 	c_can_stop(dev);
 
+	c_can_reset_ram(priv, false);
 	c_can_pm_runtime_put_sync(priv);
 
 	return 0;
@@ -1206,6 +1217,7 @@ int c_can_power_up(struct net_device *dev)
 	WARN_ON(priv->type != BOSCH_D_CAN);
 
 	c_can_pm_runtime_get_sync(priv);
+	c_can_reset_ram(priv, true);
 
 	/* Clear PDR and INIT bits */
 	val = priv->read_reg(priv, C_CAN_CTRL_EX_REG);

drivers/net/can/c_can/c_can.h

@@ -169,6 +169,9 @@ struct c_can_priv {
 	void *priv;		/* for board-specific data */
 	u16 irqstatus;
 	enum c_can_dev_id type;
+	u32 __iomem *raminit_ctrlreg;
+	unsigned int instance;
+	void (*raminit) (const struct c_can_priv *priv, bool enable);
 };
 
 struct net_device *alloc_c_can_dev(void);

drivers/net/can/c_can/c_can_platform.c

@@ -38,6 +38,8 @@
 
 #include "c_can.h"
 
+#define CAN_RAMINIT_START_MASK(i)	(1 << (i))
+
 /*
  * 16-bit c_can registers can be arranged differently in the memory
  * architecture of different implementations. For example: 16-bit
@@ -68,6 +70,18 @@ static void c_can_plat_write_reg_aligned_to_32bit(struct c_can_priv *priv,
 	writew(val, priv->base + 2 * priv->regs[index]);
 }
 
+static void c_can_hw_raminit(const struct c_can_priv *priv, bool enable)
+{
+	u32 val;
+
+	val = readl(priv->raminit_ctrlreg);
+	if (enable)
+		val |= CAN_RAMINIT_START_MASK(priv->instance);
+	else
+		val &= ~CAN_RAMINIT_START_MASK(priv->instance);
+	writel(val, priv->raminit_ctrlreg);
+}
+
 static struct platform_device_id c_can_id_table[] = {
 	[BOSCH_C_CAN_PLATFORM] = {
 		.name = KBUILD_MODNAME,
@@ -83,12 +97,14 @@ static struct platform_device_id c_can_id_table[] = {
 	}, {
 	}
 };
+MODULE_DEVICE_TABLE(platform, c_can_id_table);
 
 static const struct of_device_id c_can_of_table[] = {
 	{ .compatible = "bosch,c_can", .data = &c_can_id_table[BOSCH_C_CAN] },
 	{ .compatible = "bosch,d_can", .data = &c_can_id_table[BOSCH_D_CAN] },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(of, c_can_of_table);
 
 static int __devinit c_can_plat_probe(struct platform_device *pdev)
 {
@@ -99,7 +115,7 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
 	const struct of_device_id *match;
 	const struct platform_device_id *id;
 	struct pinctrl *pinctrl;
-	struct resource *mem;
+	struct resource *mem, *res;
 	int irq;
 	struct clk *clk;
 
@@ -178,6 +194,18 @@ static int __devinit c_can_plat_probe(struct platform_device *pdev)
 		priv->can.ctrlmode_supported |= CAN_CTRLMODE_3_SAMPLES;
 		priv->read_reg = c_can_plat_read_reg_aligned_to_16bit;
 		priv->write_reg = c_can_plat_write_reg_aligned_to_16bit;
+
+		if (pdev->dev.of_node)
+			priv->instance = of_alias_get_id(pdev->dev.of_node, "d_can");
+		else
+			priv->instance = pdev->id;
+
+		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		priv->raminit_ctrlreg =	devm_request_and_ioremap(&pdev->dev, res);
+		if (!priv->raminit_ctrlreg || priv->instance < 0)
+			dev_info(&pdev->dev, "control memory is not used for raminit\n");
+		else
+			priv->raminit = c_can_hw_raminit;
 		break;
 	default:
 		ret = -EINVAL;

drivers/net/can/cc770/cc770_platform.c

@@ -60,6 +60,7 @@
 MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
 MODULE_DESCRIPTION("Socket-CAN driver for CC770 on the platform bus");
 MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" DRV_NAME);
 
 #define CC770_PLATFORM_CAN_CLOCK  16000000
 
@@ -258,6 +259,7 @@ static struct of_device_id __devinitdata cc770_platform_table[] = {
 	{.compatible = "intc,82527"},  /* AN82527 from Intel CP */
 	{},
 };
+MODULE_DEVICE_TABLE(of, cc770_platform_table);
 
 static struct platform_driver cc770_platform_driver = {
 	.driver = {

drivers/net/can/flexcan.c

@@ -979,11 +979,13 @@ static const struct of_device_id flexcan_of_match[] = {
 	{ .compatible = "fsl,imx6q-flexcan", .data = &fsl_imx6q_devtype_data, },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(of, flexcan_of_match);
 
 static const struct platform_device_id flexcan_id_table[] = {
 	{ .name = "flexcan", .driver_data = (kernel_ulong_t)&fsl_p1010_devtype_data, },
 	{ /* sentinel */ },
 };
+MODULE_DEVICE_TABLE(platform, flexcan_id_table);
 
 static int __devinit flexcan_probe(struct platform_device *pdev)
 {

drivers/net/can/mscan/mpc5xxx_can.c

@@ -396,6 +396,7 @@ static const struct of_device_id __devinitconst mpc5xxx_can_table[] = {
 	{ .compatible = "fsl,mpc5121-mscan", .data = &mpc5121_can_data, },
 	{},
 };
+MODULE_DEVICE_TABLE(of, mpc5xxx_can_table);
 
 static struct platform_driver mpc5xxx_can_driver = {
 	.driver = {

drivers/net/can/sja1000/Kconfig

@@ -21,7 +21,7 @@ config CAN_SJA1000_PLATFORM
 
 config CAN_SJA1000_OF_PLATFORM
 	tristate "Generic OF Platform Bus based SJA1000 driver"
-	depends on PPC_OF
+	depends on OF
 	---help---
 	  This driver adds support for the SJA1000 chips connected to
 	  the OpenFirmware "platform bus" found on embedded systems with

drivers/net/can/sja1000/sja1000_of_platform.c

@@ -42,6 +42,8 @@
 #include <linux/can/dev.h>
 
 #include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <asm/prom.h>
 
 #include "sja1000.h"
@@ -59,13 +61,13 @@ MODULE_LICENSE("GPL v2");
 
 static u8 sja1000_ofp_read_reg(const struct sja1000_priv *priv, int reg)
 {
-	return in_8(priv->reg_base + reg);
+	return ioread8(priv->reg_base + reg);
 }
 
 static void sja1000_ofp_write_reg(const struct sja1000_priv *priv,
 				  int reg, u8 val)
 {
-	out_8(priv->reg_base + reg, val);
+	iowrite8(val, priv->reg_base + reg);
 }
 
 static int __devexit sja1000_ofp_remove(struct platform_device *ofdev)

drivers/net/can/sja1000/sja1000_platform.c

@@ -34,6 +34,7 @@
 
 MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
 MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the platform bus");
+MODULE_ALIAS("platform:" DRV_NAME);
 MODULE_LICENSE("GPL v2");
 
 static u8 sp_read_reg8(const struct sja1000_priv *priv, int reg)

drivers/net/can/ti_hecc.c

@@ -1055,3 +1055,4 @@ module_platform_driver(ti_hecc_driver);
 MODULE_AUTHOR("Anant Gole <anantgole@ti.com>");
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION(DRV_DESC);
+MODULE_ALIAS("platform:" DRV_NAME);

drivers/net/can/usb/Kconfig

@@ -13,6 +13,35 @@ config CAN_ESD_USB2
           This driver supports the CAN-USB/2 interface
           from esd electronic system design gmbh (http://www.esd.eu).
 
+config CAN_KVASER_USB
+	tristate "Kvaser CAN/USB interface"
+	---help---
+	  This driver adds support for Kvaser CAN/USB devices like Kvaser
+	  Leaf Light.
+
+	  The driver gives support for the following devices:
+	    - Kvaser Leaf Light
+	    - Kvaser Leaf Professional HS
+	    - Kvaser Leaf SemiPro HS
+	    - Kvaser Leaf Professional LS
+	    - Kvaser Leaf Professional SWC
+	    - Kvaser Leaf Professional LIN
+	    - Kvaser Leaf SemiPro LS
+	    - Kvaser Leaf SemiPro SWC
+	    - Kvaser Memorator II HS/HS
+	    - Kvaser USBcan Professional HS/HS
+	    - Kvaser Leaf Light GI
+	    - Kvaser Leaf Professional HS (OBD-II connector)
+	    - Kvaser Memorator Professional HS/LS
+	    - Kvaser Leaf Light "China"
+	    - Kvaser BlackBird SemiPro
+	    - Kvaser USBcan R
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kvaser_usb.
+
 config CAN_PEAK_USB
 	tristate "PEAK PCAN-USB/USB Pro interfaces"
 	---help---

drivers/net/can/usb/Makefile

@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
 obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o
+obj-$(CONFIG_CAN_KVASER_USB) += kvaser_usb.o
 obj-$(CONFIG_CAN_PEAK_USB) += peak_usb/
 
 ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG