iio: adc: Move mxs-lradc out of staging

Move mxs-lradc driver from drivers/staging/iio/adc to drivers/iio/adc.
Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/adc/Kconfig

@@ -295,6 +295,20 @@ config MEN_Z188_ADC
 	  This driver can also be built as a module. If so, the module will be
 	  called men_z188_adc.
 
+config MXS_LRADC
+        tristate "Freescale i.MX23/i.MX28 LRADC"
+        depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM
+        depends on INPUT
+        select STMP_DEVICE
+        select IIO_BUFFER
+        select IIO_TRIGGERED_BUFFER
+        help
+          Say yes here to build support for i.MX23/i.MX28 LRADC convertor
+          built into these chips.
+
+          To compile this driver as a module, choose M here: the
+          module will be called mxs-lradc.
+
 config NAU7802
 	tristate "Nuvoton NAU7802 ADC driver"
 	depends on I2C

drivers/iio/adc/Makefile

@@ -29,6 +29,7 @@ obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
+obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
 obj-$(CONFIG_PALMAS_GPADC) += palmas_gpadc.o
 obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o

drivers/staging/iio/adc/mxs-lradc.c → drivers/iio/adc/mxs-lradc.c

@@ -443,7 +443,8 @@ static void mxs_lradc_setup_ts_channel(struct mxs_lradc *lradc, unsigned ch)
 			  LRADC_CH_NUM_SAMPLES(lradc->over_sample_cnt - 1),
 			  LRADC_CH(ch));
 
-	/* from the datasheet:
+	/*
+	 * from the datasheet:
 	 * "Software must clear this register in preparation for a
 	 * multi-cycle accumulation.
 	 */
@@ -504,7 +505,8 @@ static void mxs_lradc_setup_ts_pressure(struct mxs_lradc *lradc, unsigned ch1,
 	mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1));
 	mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2));
 
-	/* from the datasheet:
+	/*
+	 * from the datasheet:
 	 * "Software must clear this register in preparation for a
 	 * multi-cycle accumulation.
 	 */
@@ -914,7 +916,8 @@ static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
 
 	case IIO_CHAN_INFO_SCALE:
 		if (chan->type == IIO_TEMP) {
-			/* From the datasheet, we have to multiply by 1.012 and
+			/*
+			 * From the datasheet, we have to multiply by 1.012 and
 			 * divide by 4
 			 */
 			*val = 0;
@@ -929,7 +932,8 @@ static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
 
 	case IIO_CHAN_INFO_OFFSET:
 		if (chan->type == IIO_TEMP) {
-			/* The calculated value from the ADC is in Kelvin, we
+			/*
+			 * The calculated value from the ADC is in Kelvin, we
 			 * want Celsius for hwmon so the offset is -273.15
 			 * The offset is applied before scaling so it is
 			 * actually -213.15 * 4 / 1.012 = -1079.644268
@@ -1750,6 +1754,7 @@ static int mxs_lradc_remove(struct platform_device *pdev)
 	iio_triggered_buffer_cleanup(iio);
 
 	clk_disable_unprepare(lradc->clk);
+
 	return 0;
 }
 

drivers/staging/iio/adc/Kconfig

@@ -91,20 +91,6 @@ config LPC32XX_ADC
 	  activate only one via device tree selection.  Provides direct access
 	  via sysfs.
 
-config MXS_LRADC
-	tristate "Freescale i.MX23/i.MX28 LRADC"
-	depends on (ARCH_MXS || COMPILE_TEST) && HAS_IOMEM
-	depends on INPUT
-	select STMP_DEVICE
-	select IIO_BUFFER
-	select IIO_TRIGGERED_BUFFER
-	help
-	  Say yes here to build support for i.MX23/i.MX28 LRADC convertor
-	  built into these chips.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called mxs-lradc.
-
 config SPEAR_ADC
 	tristate "ST SPEAr ADC"
 	depends on PLAT_SPEAR || COMPILE_TEST

drivers/staging/iio/adc/Makefile

@@ -12,5 +12,4 @@ obj-$(CONFIG_AD7816) += ad7816.o
 obj-$(CONFIG_AD7192) += ad7192.o
 obj-$(CONFIG_AD7280) += ad7280a.o
 obj-$(CONFIG_LPC32XX_ADC) += lpc32xx_adc.o
-obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
 obj-$(CONFIG_SPEAR_ADC) += spear_adc.o