pwm: atmel: Don't use pwm consumer API

Lowlevel driver callbacks are not supposed to use the consumer API
functions. Currently this works, but with the upcoming locking changes
this probably results in dead locks.
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/r/20240129085627.2386470-2-u.kleine-koenig@pengutronix.deSigned-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

drivers/pwm/pwm-atmel.c

@@ -294,19 +294,16 @@ static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			   const struct pwm_state *state)
 {
 	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
-	struct pwm_state cstate;
 	unsigned long cprd, cdty;
 	u32 pres, val;
 	int ret;
 
-	pwm_get_state(pwm, &cstate);
-
 	if (state->enabled) {
 		unsigned long clkrate = clk_get_rate(atmel_pwm->clk);
 
-		if (cstate.enabled &&
-		    cstate.polarity == state->polarity &&
-		    cstate.period == state->period) {
+		if (pwm->state.enabled &&
+		    pwm->state.polarity == state->polarity &&
+		    pwm->state.period == state->period) {
 			u32 cmr = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
 
 			cprd = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
@@ -328,7 +325,7 @@ static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 		atmel_pwm_calculate_cdty(state, clkrate, cprd, pres, &cdty);
 
-		if (cstate.enabled) {
+		if (pwm->state.enabled) {
 			atmel_pwm_disable(chip, pwm, false);
 		} else {
 			ret = clk_enable(atmel_pwm->clk);
@@ -348,7 +345,7 @@ static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
 		atmel_pwm_set_cprd_cdty(chip, pwm, cprd, cdty);
 		atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm);
-	} else if (cstate.enabled) {
+	} else if (pwm->state.enabled) {
 		atmel_pwm_disable(chip, pwm, true);
 	}