Skip to content

L
linux
Commit f8d791f2 authored by Anson Jacob's avatar Anson Jacob Committed by Greg Kroah-Hartman
Browse files
Options

staging: comedi: jr3_pci.h: Fix checkpatch warning 

Fix checkpatch.pl warning:
Block comments use * on subsequent lines
Block comments use a trailing */ on a separate line

Block comments starts with /* followed by comments on the next line
Signed-off-by: default avatarAnson Jacob <ansonjacob.aj@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 12f992ad
Show whitespace changes
Inline Side-by-side
Showing with 172 additions and 118 deletions
drivers/staging/comedi/drivers/jr3_pci.h
View file @ f8d791f2
/* Helper types to take care of the fact that the DSP card memory /*
* Helper types to take care of the fact that the DSP card memory
* is 16 bits, but aligned on a 32 bit PCI boundary * is 16 bits, but aligned on a 32 bit PCI boundary
*/ */
...@@ -22,7 +23,8 @@ static inline void set_s16(s32 __iomem *p, s16 val) ...@@ -22,7 +23,8 @@ static inline void set_s16(s32 __iomem *p, s16 val)
writel(val, p); writel(val, p);
} }
/* The raw data is stored in a format which facilitates rapid /*
* The raw data is stored in a format which facilitates rapid
* processing by the JR3 DSP chip. The raw_channel structure shows the * processing by the JR3 DSP chip. The raw_channel structure shows the
* format for a single channel of data. Each channel takes four, * format for a single channel of data. Each channel takes four,
* two-byte words. * two-byte words.
...@@ -47,7 +49,8 @@ struct raw_channel { ...@@ -47,7 +49,8 @@ struct raw_channel {
s32 reserved[2]; s32 reserved[2];
}; };
/* The force_array structure shows the layout for the decoupled and /*
* The force_array structure shows the layout for the decoupled and
* filtered force data. * filtered force data.
*/ */
struct force_array { struct force_array {
...@@ -61,7 +64,8 @@ struct force_array { ...@@ -61,7 +64,8 @@ struct force_array {
s32 v2; s32 v2;
}; };
/* The six_axis_array structure shows the layout for the offsets and /*
* The six_axis_array structure shows the layout for the offsets and
* the full scales. * the full scales.
*/ */
struct six_axis_array { struct six_axis_array {
...@@ -74,7 +78,8 @@ struct six_axis_array { ...@@ -74,7 +78,8 @@ struct six_axis_array {
}; };
/* VECT_BITS */ /* VECT_BITS */
/* The vect_bits structure shows the layout for indicating /*
* The vect_bits structure shows the layout for indicating
* which axes to use in computing the vectors. Each bit signifies * which axes to use in computing the vectors. Each bit signifies
* selection of a single axis. The V1x axis bit corresponds to a hex * selection of a single axis. The V1x axis bit corresponds to a hex
* value of 0x0001 and the V2z bit corresponds to a hex value of * value of 0x0001 and the V2z bit corresponds to a hex value of
...@@ -100,12 +105,14 @@ enum { ...@@ -100,12 +105,14 @@ enum {
}; };
/* WARNING_BITS */ /* WARNING_BITS */
/* The warning_bits structure shows the bit pattern for the warning /*
* The warning_bits structure shows the bit pattern for the warning
* word. The bit fields are shown from bit 0 (lsb) to bit 15 (msb). * word. The bit fields are shown from bit 0 (lsb) to bit 15 (msb).
*/ */
/* XX_NEAR_SET */ /* XX_NEAR_SET */
/* The xx_near_sat bits signify that the indicated axis has reached or /*
* The xx_near_sat bits signify that the indicated axis has reached or
* exceeded the near saturation value. * exceeded the near saturation value.
*/ */
...@@ -123,7 +130,8 @@ enum { ...@@ -123,7 +130,8 @@ enum {
/* MEMORY_ERROR */ /* MEMORY_ERROR */
/* SENSOR_CHANGE */ /* SENSOR_CHANGE */
/* The error_bits structure shows the bit pattern for the error word. /*
* The error_bits structure shows the bit pattern for the error word.
* The bit fields are shown from bit 0 (lsb) to bit 15 (msb). The * The bit fields are shown from bit 0 (lsb) to bit 15 (msb). The
* xx_sat bits signify that the indicated axis has reached or exceeded * xx_sat bits signify that the indicated axis has reached or exceeded
* the saturation value. The memory_error bit indicates that a problem * the saturation value. The memory_error bit indicates that a problem
...@@ -136,7 +144,8 @@ enum { ...@@ -136,7 +144,8 @@ enum {
/* SYSTEM_BUSY */ /* SYSTEM_BUSY */
/* The system_busy bit indicates that the JR3 DSP is currently busy /*
* The system_busy bit indicates that the JR3 DSP is currently busy
* and is not calculating force data. This occurs when a new * and is not calculating force data. This occurs when a new
* coordinate transformation, or new sensor full scale is set by the * coordinate transformation, or new sensor full scale is set by the
* user. A very fast system using the force data for feedback might * user. A very fast system using the force data for feedback might
...@@ -148,7 +157,8 @@ enum { ...@@ -148,7 +157,8 @@ enum {
/* CAL_CRC_BAD */ /* CAL_CRC_BAD */
/* The cal_crc_bad bit indicates that the calibration CRC has not /*
* The cal_crc_bad bit indicates that the calibration CRC has not
* calculated to zero. CRC is short for cyclic redundancy code. It is * calculated to zero. CRC is short for cyclic redundancy code. It is
* a method for determining the integrity of messages in data * a method for determining the integrity of messages in data
* communication. The calibration data stored inside the sensor is * communication. The calibration data stored inside the sensor is
...@@ -168,7 +178,8 @@ enum { ...@@ -168,7 +178,8 @@ enum {
/* WATCH_DOG */ /* WATCH_DOG */
/* WATCH_DOG2 */ /* WATCH_DOG2 */
/* The watch_dog and watch_dog2 bits are sensor, not processor, watch /*
* The watch_dog and watch_dog2 bits are sensor, not processor, watch
* dog bits. Watch_dog indicates that the sensor data line seems to be * dog bits. Watch_dog indicates that the sensor data line seems to be
* acting correctly, while watch_dog2 indicates that sensor data and * acting correctly, while watch_dog2 indicates that sensor data and
* clock are being received. It is possible for watch_dog2 to go off * clock are being received. It is possible for watch_dog2 to go off
...@@ -194,7 +205,8 @@ enum error_bits_t { ...@@ -194,7 +205,8 @@ enum error_bits_t {
/* THRESH_STRUCT */ /* THRESH_STRUCT */
/* This structure shows the layout for a single threshold packet inside of a /*
* This structure shows the layout for a single threshold packet inside of a
* load envelope. Each load envelope can contain several threshold structures. * load envelope. Each load envelope can contain several threshold structures.
* 1. data_address contains the address of the data for that threshold. This * 1. data_address contains the address of the data for that threshold. This
* includes filtered, unfiltered, raw, rate, counters, error and warning data * includes filtered, unfiltered, raw, rate, counters, error and warning data
...@@ -212,7 +224,8 @@ struct thresh_struct { ...@@ -212,7 +224,8 @@ struct thresh_struct {
/* LE_STRUCT */ /* LE_STRUCT */
/* Layout of a load enveloped packet. Four thresholds are showed ... for more /*
* Layout of a load enveloped packet. Four thresholds are showed ... for more
* see manual (pag.25) * see manual (pag.25)
* 1. latch_bits is a bit pattern that show which bits the user wants to latch. * 1. latch_bits is a bit pattern that show which bits the user wants to latch.
* The latched bits will not be reset once the threshold which set them is * The latched bits will not be reset once the threshold which set them is
...@@ -229,7 +242,8 @@ struct le_struct { ...@@ -229,7 +242,8 @@ struct le_struct {
}; };
/* LINK_TYPES */ /* LINK_TYPES */
/* Link types is an enumerated value showing the different possible transform /*
* Link types is an enumerated value showing the different possible transform
* link types. * link types.
* 0 - end transform packet * 0 - end transform packet
* 1 - translate along X axis (TX) * 1 - translate along X axis (TX)
...@@ -261,23 +275,29 @@ struct intern_transform { ...@@ -261,23 +275,29 @@ struct intern_transform {
} link[8]; } link[8];
}; };
/* JR3 force/torque sensor data definition. For more information see sensor /*
* JR3 force/torque sensor data definition. For more information see sensor
* and hardware manuals. * and hardware manuals.
*/ */
struct jr3_channel { struct jr3_channel {
/* Raw_channels is the area used to store the raw data coming from */ /*
/* the sensor. */ * Raw_channels is the area used to store the raw data coming from
* the sensor.
*/
struct raw_channel raw_channels[16]; /* offset 0x0000 */ struct raw_channel raw_channels[16]; /* offset 0x0000 */
/* Copyright is a null terminated ASCII string containing the JR3 */ /*
/* copyright notice. */ * Copyright is a null terminated ASCII string containing the JR3
* copyright notice.
*/
u32 copyright[0x0018]; /* offset 0x0040 */ u32 copyright[0x0018]; /* offset 0x0040 */
s32 reserved1[0x0008]; /* offset 0x0058 */ s32 reserved1[0x0008]; /* offset 0x0058 */
/* Shunts contains the sensor shunt readings. Some JR3 sensors have /*
* Shunts contains the sensor shunt readings. Some JR3 sensors have
* the ability to have their gains adjusted. This allows the * the ability to have their gains adjusted. This allows the
* hardware full scales to be adjusted to potentially allow * hardware full scales to be adjusted to potentially allow
* better resolution or dynamic range. For sensors that have * better resolution or dynamic range. For sensors that have
...@@ -301,13 +321,16 @@ struct jr3_channel { ...@@ -301,13 +321,16 @@ struct jr3_channel {
struct six_axis_array shunts; /* offset 0x0060 */ struct six_axis_array shunts; /* offset 0x0060 */
s32 reserved2[2]; /* offset 0x0066 */ s32 reserved2[2]; /* offset 0x0066 */
/* Default_FS contains the full scale that is used if the user does */ /*
/* not set a full scale. */ * Default_FS contains the full scale that is used if the user does
* not set a full scale.
*/
struct six_axis_array default_FS; /* offset 0x0068 */ struct six_axis_array default_FS; /* offset 0x0068 */
s32 reserved3; /* offset 0x006e */ s32 reserved3; /* offset 0x006e */
/* Load_envelope_num is the load envelope number that is currently /*
* Load_envelope_num is the load envelope number that is currently
* in use. This value is set by the user after one of the load * in use. This value is set by the user after one of the load
* envelopes has been initialized. * envelopes has been initialized.
*/ */
...@@ -316,7 +339,8 @@ struct jr3_channel { ...@@ -316,7 +339,8 @@ struct jr3_channel {
/* Min_full_scale is the recommend minimum full scale. */ /* Min_full_scale is the recommend minimum full scale. */
/* These values in conjunction with max_full_scale (pg. 9) helps /*
* These values in conjunction with max_full_scale (pg. 9) helps
* determine the appropriate value for setting the full scales. The * determine the appropriate value for setting the full scales. The
* software allows the user to set the sensor full scale to an * software allows the user to set the sensor full scale to an
* arbitrary value. But setting the full scales has some hazards. If * arbitrary value. But setting the full scales has some hazards. If
...@@ -344,20 +368,24 @@ struct jr3_channel { ...@@ -344,20 +368,24 @@ struct jr3_channel {
struct six_axis_array min_full_scale; /* offset 0x0070 */ struct six_axis_array min_full_scale; /* offset 0x0070 */
s32 reserved4; /* offset 0x0076 */ s32 reserved4; /* offset 0x0076 */
/* Transform_num is the transform number that is currently in use. /*
* Transform_num is the transform number that is currently in use.
* This value is set by the JR3 DSP after the user has used command * This value is set by the JR3 DSP after the user has used command
* (5) use transform # (pg. 33). * (5) use transform # (pg. 33).
*/ */
s32 transform_num; /* offset 0x0077 */ s32 transform_num; /* offset 0x0077 */
/* Max_full_scale is the recommended maximum full scale. See */ /*
/* min_full_scale (pg. 9) for more details. */ * Max_full_scale is the recommended maximum full scale.
* See min_full_scale (pg. 9) for more details.
*/
struct six_axis_array max_full_scale; /* offset 0x0078 */ struct six_axis_array max_full_scale; /* offset 0x0078 */
s32 reserved5; /* offset 0x007e */ s32 reserved5; /* offset 0x007e */
/* Peak_address is the address of the data which will be monitored /*
* Peak_address is the address of the data which will be monitored
* by the peak routine. This value is set by the user. The peak * by the peak routine. This value is set by the user. The peak
* routine will monitor any 8 contiguous addresses for peak values. * routine will monitor any 8 contiguous addresses for peak values.
* (ex. to watch filter3 data for peaks, set this value to 0x00a8). * (ex. to watch filter3 data for peaks, set this value to 0x00a8).
...@@ -365,7 +393,8 @@ struct jr3_channel { ...@@ -365,7 +393,8 @@ struct jr3_channel {
s32 peak_address; /* offset 0x007f */ s32 peak_address; /* offset 0x007f */
/* Full_scale is the sensor full scales which are currently in use. /*
* Full_scale is the sensor full scales which are currently in use.
* Decoupled and filtered data is scaled so that +/- 16384 is equal * Decoupled and filtered data is scaled so that +/- 16384 is equal
* to the full scales. The engineering units used are indicated by * to the full scales. The engineering units used are indicated by
* the units value discussed on page 16. The full scales for Fx, Fy, * the units value discussed on page 16. The full scales for Fx, Fy,
...@@ -379,7 +408,8 @@ struct jr3_channel { ...@@ -379,7 +408,8 @@ struct jr3_channel {
struct force_array full_scale; /* offset 0x0080 */ struct force_array full_scale; /* offset 0x0080 */
/* Offsets contains the sensor offsets. These values are subtracted from /*
* Offsets contains the sensor offsets. These values are subtracted from
* the sensor data to obtain the decoupled data. The offsets are set a * the sensor data to obtain the decoupled data. The offsets are set a
* few seconds (< 10) after the calibration data has been received. * few seconds (< 10) after the calibration data has been received.
* They are set so that the output data will be zero. These values * They are set so that the output data will be zero. These values
...@@ -394,21 +424,24 @@ struct jr3_channel { ...@@ -394,21 +424,24 @@ struct jr3_channel {
struct six_axis_array offsets; /* offset 0x0088 */ struct six_axis_array offsets; /* offset 0x0088 */
/* Offset_num is the number of the offset currently in use. This /*
* Offset_num is the number of the offset currently in use. This
* value is set by the JR3 DSP after the user has executed the use * value is set by the JR3 DSP after the user has executed the use
* offset # command (pg. 34). It can vary between 0 and 15. * offset # command (pg. 34). It can vary between 0 and 15.
*/ */
s32 offset_num; /* offset 0x008e */ s32 offset_num; /* offset 0x008e */
/* Vect_axes is a bit map showing which of the axes are being used /*
* Vect_axes is a bit map showing which of the axes are being used
* in the vector calculations. This value is set by the JR3 DSP * in the vector calculations. This value is set by the JR3 DSP
* after the user has executed the set vector axes command (pg. 37). * after the user has executed the set vector axes command (pg. 37).
*/ */
u32 vect_axes; /* offset 0x008f */ u32 vect_axes; /* offset 0x008f */
/* Filter0 is the decoupled, unfiltered data from the JR3 sensor. /*
* Filter0 is the decoupled, unfiltered data from the JR3 sensor.
* This data has had the offsets removed. * This data has had the offsets removed.
* *
* These force_arrays hold the filtered data. The decoupled data is * These force_arrays hold the filtered data. The decoupled data is
...@@ -420,15 +453,18 @@ struct jr3_channel { ...@@ -420,15 +453,18 @@ struct jr3_channel {
* cutoff at 125 Hz, 31.25 Hz, 7.813 Hz, 1.953 Hz and 0.4883 Hz. * cutoff at 125 Hz, 31.25 Hz, 7.813 Hz, 1.953 Hz and 0.4883 Hz.
*/ */
struct force_array filter[7]; /* offset 0x0090, struct force_array filter[7]; /*
offset 0x0098, * offset 0x0090,
offset 0x00a0, * offset 0x0098,
offset 0x00a8, * offset 0x00a0,
offset 0x00b0, * offset 0x00a8,
offset 0x00b8 , * offset 0x00b0,
offset 0x00c0 */ * offset 0x00b8,
* offset 0x00c0
*/
/* Rate_data is the calculated rate data. It is a first derivative /*
* Rate_data is the calculated rate data. It is a first derivative
* calculation. It is calculated at a frequency specified by the * calculation. It is calculated at a frequency specified by the
* variable rate_divisor (pg. 12). The data on which the rate is * variable rate_divisor (pg. 12). The data on which the rate is
* calculated is specified by the variable rate_address (pg. 12). * calculated is specified by the variable rate_address (pg. 12).
...@@ -436,7 +472,8 @@ struct jr3_channel { ...@@ -436,7 +472,8 @@ struct jr3_channel {
struct force_array rate_data; /* offset 0x00c8 */ struct force_array rate_data; /* offset 0x00c8 */
/* Minimum_data & maximum_data are the minimum and maximum (peak) /*
* Minimum_data & maximum_data are the minimum and maximum (peak)
* data values. The JR3 DSP can monitor any 8 contiguous data items * data values. The JR3 DSP can monitor any 8 contiguous data items
* for minimums and maximums at full sensor bandwidth. This area is * for minimums and maximums at full sensor bandwidth. This area is
* only updated at user request. This is done so that the user does * only updated at user request. This is done so that the user does
...@@ -451,7 +488,8 @@ struct jr3_channel { ...@@ -451,7 +488,8 @@ struct jr3_channel {
struct force_array minimum_data; /* offset 0x00d0 */ struct force_array minimum_data; /* offset 0x00d0 */
struct force_array maximum_data; /* offset 0x00d8 */ struct force_array maximum_data; /* offset 0x00d8 */
/* Near_sat_value & sat_value contain the value used to determine if /*
* Near_sat_value & sat_value contain the value used to determine if
* the raw sensor is saturated. Because of decoupling and offset * the raw sensor is saturated. Because of decoupling and offset
* removal, it is difficult to tell from the processed data if the * removal, it is difficult to tell from the processed data if the
* sensor is saturated. These values, in conjunction with the error * sensor is saturated. These values, in conjunction with the error
...@@ -468,7 +506,8 @@ struct jr3_channel { ...@@ -468,7 +506,8 @@ struct jr3_channel {
s32 near_sat_value; /* offset 0x00e0 */ s32 near_sat_value; /* offset 0x00e0 */
s32 sat_value; /* offset 0x00e1 */ s32 sat_value; /* offset 0x00e1 */
/* Rate_address, rate_divisor & rate_count contain the data used to /*
* Rate_address, rate_divisor & rate_count contain the data used to
* control the calculations of the rates. Rate_address is the * control the calculations of the rates. Rate_address is the
* address of the data used for the rate calculation. The JR3 DSP * address of the data used for the rate calculation. The JR3 DSP
* will calculate rates for any 8 contiguous values (ex. to * will calculate rates for any 8 contiguous values (ex. to
...@@ -489,7 +528,8 @@ struct jr3_channel { ...@@ -489,7 +528,8 @@ struct jr3_channel {
u32 rate_divisor; /* offset 0x00e3 */ u32 rate_divisor; /* offset 0x00e3 */
u32 rate_count; /* offset 0x00e4 */ u32 rate_count; /* offset 0x00e4 */
/* Command_word2 through command_word0 are the locations used to /*
* Command_word2 through command_word0 are the locations used to
* send commands to the JR3 DSP. Their usage varies with the command * send commands to the JR3 DSP. Their usage varies with the command
* and is detailed later in the Command Definitions section (pg. * and is detailed later in the Command Definitions section (pg.
* 29). In general the user places values into various memory * 29). In general the user places values into various memory
...@@ -506,7 +546,8 @@ struct jr3_channel { ...@@ -506,7 +546,8 @@ struct jr3_channel {
s32 command_word1; /* offset 0x00e6 */ s32 command_word1; /* offset 0x00e6 */
s32 command_word0; /* offset 0x00e7 */ s32 command_word0; /* offset 0x00e7 */
/* Count1 through count6 are unsigned counters which are incremented /*
* Count1 through count6 are unsigned counters which are incremented
* every time the matching filters are calculated. Filter1 is * every time the matching filters are calculated. Filter1 is
* calculated at the sensor data bandwidth. So this counter would * calculated at the sensor data bandwidth. So this counter would
* increment at 8 kHz for a typical sensor. The rest of the counters * increment at 8 kHz for a typical sensor. The rest of the counters
...@@ -525,7 +566,8 @@ struct jr3_channel { ...@@ -525,7 +566,8 @@ struct jr3_channel {
u32 count5; /* offset 0x00ec */ u32 count5; /* offset 0x00ec */
u32 count6; /* offset 0x00ed */ u32 count6; /* offset 0x00ed */
/* Error_count is a running count of data reception errors. If this /*
* Error_count is a running count of data reception errors. If this
* counter is changing rapidly, it probably indicates a bad sensor * counter is changing rapidly, it probably indicates a bad sensor
* cable connection or other hardware problem. In most installations * cable connection or other hardware problem. In most installations
* error_count should not change at all. But it is possible in an * error_count should not change at all. But it is possible in an
...@@ -537,7 +579,8 @@ struct jr3_channel { ...@@ -537,7 +579,8 @@ struct jr3_channel {
u32 error_count; /* offset 0x00ee */ u32 error_count; /* offset 0x00ee */
/* Count_x is a counter which is incremented every time the JR3 DSP /*
* Count_x is a counter which is incremented every time the JR3 DSP
* searches its job queues and finds nothing to do. It indicates the * searches its job queues and finds nothing to do. It indicates the
* amount of idle time the JR3 DSP has available. It can also be * amount of idle time the JR3 DSP has available. It can also be
* used to determine if the JR3 DSP is alive. See the Performance * used to determine if the JR3 DSP is alive. See the Performance
...@@ -546,7 +589,8 @@ struct jr3_channel { ...@@ -546,7 +589,8 @@ struct jr3_channel {
u32 count_x; /* offset 0x00ef */ u32 count_x; /* offset 0x00ef */
/* Warnings & errors contain the warning and error bits /*
* Warnings & errors contain the warning and error bits
* respectively. The format of these two words is discussed on page * respectively. The format of these two words is discussed on page
* 21 under the headings warnings_bits and error_bits. * 21 under the headings warnings_bits and error_bits.
*/ */
...@@ -554,21 +598,24 @@ struct jr3_channel { ...@@ -554,21 +598,24 @@ struct jr3_channel {
u32 warnings; /* offset 0x00f0 */ u32 warnings; /* offset 0x00f0 */
u32 errors; /* offset 0x00f1 */ u32 errors; /* offset 0x00f1 */
/* Threshold_bits is a word containing the bits that are set by the /*
* Threshold_bits is a word containing the bits that are set by the
* load envelopes. See load_envelopes (pg. 17) and thresh_struct * load envelopes. See load_envelopes (pg. 17) and thresh_struct
* (pg. 23) for more details. * (pg. 23) for more details.
*/ */
s32 threshold_bits; /* offset 0x00f2 */ s32 threshold_bits; /* offset 0x00f2 */
/* Last_crc is the value that shows the actual calculated CRC. CRC /*
* Last_crc is the value that shows the actual calculated CRC. CRC
* is short for cyclic redundancy code. It should be zero. See the * is short for cyclic redundancy code. It should be zero. See the
* description for cal_crc_bad (pg. 21) for more information. * description for cal_crc_bad (pg. 21) for more information.
*/ */
s32 last_CRC; /* offset 0x00f3 */ s32 last_CRC; /* offset 0x00f3 */
/* EEProm_ver_no contains the version number of the sensor EEProm. /*
* EEProm_ver_no contains the version number of the sensor EEProm.
* EEProm version numbers can vary between 0 and 255. * EEProm version numbers can vary between 0 and 255.
* Software_ver_no contains the software version number. Version * Software_ver_no contains the software version number. Version
* 3.02 would be stored as 302. * 3.02 would be stored as 302.
...@@ -577,7 +624,8 @@ struct jr3_channel { ...@@ -577,7 +624,8 @@ struct jr3_channel {
s32 eeprom_ver_no; /* offset 0x00f4 */ s32 eeprom_ver_no; /* offset 0x00f4 */
s32 software_ver_no; /* offset 0x00f5 */ s32 software_ver_no; /* offset 0x00f5 */
/* Software_day & software_year are the release date of the software /*
* Software_day & software_year are the release date of the software
* the JR3 DSP is currently running. Day is the day of the year, * the JR3 DSP is currently running. Day is the day of the year,
* with January 1 being 1, and December 31, being 365 for non leap * with January 1 being 1, and December 31, being 365 for non leap
* years. * years.
...@@ -586,7 +634,8 @@ struct jr3_channel { ...@@ -586,7 +634,8 @@ struct jr3_channel {
s32 software_day; /* offset 0x00f6 */ s32 software_day; /* offset 0x00f6 */
s32 software_year; /* offset 0x00f7 */ s32 software_year; /* offset 0x00f7 */
/* Serial_no & model_no are the two values which uniquely identify a /*
* Serial_no & model_no are the two values which uniquely identify a
* sensor. This model number does not directly correspond to the JR3 * sensor. This model number does not directly correspond to the JR3
* model number, but it will provide a unique identifier for * model number, but it will provide a unique identifier for
* different sensor configurations. * different sensor configurations.
...@@ -595,7 +644,8 @@ struct jr3_channel { ...@@ -595,7 +644,8 @@ struct jr3_channel {
u32 serial_no; /* offset 0x00f8 */ u32 serial_no; /* offset 0x00f8 */
u32 model_no; /* offset 0x00f9 */ u32 model_no; /* offset 0x00f9 */
/* Cal_day & cal_year are the sensor calibration date. Day is the /*
* Cal_day & cal_year are the sensor calibration date. Day is the
* day of the year, with January 1 being 1, and December 31, being * day of the year, with January 1 being 1, and December 31, being
* 366 for leap years. * 366 for leap years.
*/ */
...@@ -603,7 +653,8 @@ struct jr3_channel { ...@@ -603,7 +653,8 @@ struct jr3_channel {
s32 cal_day; /* offset 0x00fa */ s32 cal_day; /* offset 0x00fa */
s32 cal_year; /* offset 0x00fb */ s32 cal_year; /* offset 0x00fb */
/* Units is an enumerated read only value defining the engineering /*
* Units is an enumerated read only value defining the engineering
* units used in the sensor full scale. The meanings of particular * units used in the sensor full scale. The meanings of particular
* values are discussed in the section detailing the force_units * values are discussed in the section detailing the force_units
* structure on page 22. The engineering units are setto customer * structure on page 22. The engineering units are setto customer
...@@ -630,7 +681,8 @@ struct jr3_channel { ...@@ -630,7 +681,8 @@ struct jr3_channel {
s32 bits; /* offset 0x00fd */ s32 bits; /* offset 0x00fd */
s32 channels; /* offset 0x00fe */ s32 channels; /* offset 0x00fe */
/* Thickness specifies the overall thickness of the sensor from /*
* Thickness specifies the overall thickness of the sensor from
* flange to flange. The engineering units for this value are * flange to flange. The engineering units for this value are
* contained in units (pg. 16). The sensor calibration is relative * contained in units (pg. 16). The sensor calibration is relative
* to the center of the sensor. This value allows easy coordinate * to the center of the sensor. This value allows easy coordinate
...@@ -639,7 +691,8 @@ struct jr3_channel { ...@@ -639,7 +691,8 @@ struct jr3_channel {
s32 thickness; /* offset 0x00ff */ s32 thickness; /* offset 0x00ff */
/* Load_envelopes is a table containing the load envelope /*
* Load_envelopes is a table containing the load envelope
* descriptions. There are 16 possible load envelope slots in the * descriptions. There are 16 possible load envelope slots in the
* table. The slots are on 16 word boundaries and are numbered 0-15. * table. The slots are on 16 word boundaries and are numbered 0-15.
* Each load envelope needs to start at the beginning of a slot but * Each load envelope needs to start at the beginning of a slot but
...@@ -655,7 +708,8 @@ struct jr3_channel { ...@@ -655,7 +708,8 @@ struct jr3_channel {
struct le_struct load_envelopes[0x10]; /* offset 0x0100 */ struct le_struct load_envelopes[0x10]; /* offset 0x0100 */
/* Transforms is a table containing the transform descriptions. /*
* Transforms is a table containing the transform descriptions.
* There are 16 possible transform slots in the table. The slots are * There are 16 possible transform slots in the table. The slots are
* on 16 word boundaries and are numbered 0-15. Each transform needs * on 16 word boundaries and are numbered 0-15. Each transform needs
* to start at the beginning of a slot but need not be fully * to start at the beginning of a slot but need not be fully
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7