From f8f797f35a9ababcf763b7a3984aff41fdd3f064 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: Thu, 27 Oct 2022 00:34:02 -0700
Subject: [PATCH] nfc: s3fwrn5: use devm_clk_get_optional_enabled() helper
Because we enable the clock immediately after acquiring it in probe,
we can combine the 2 operations and use devm_clk_get_optional_enabled()
helper.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/nfc/s3fwrn5/i2c.c | 19 +++++--------------
1 file changed, 5 insertions(+), 14 deletions(-)
diff --git a/drivers/nfc/s3fwrn5/i2c.c b/drivers/nfc/s3fwrn5/i2c.c
index f824dc7099ce..ecdee838d25d 100644
--- a/drivers/nfc/s3fwrn5/i2c.c
+++ b/drivers/nfc/s3fwrn5/i2c.c
@@ -209,27 +209,21 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
if (ret < 0)
return ret;
- phy->clk = devm_clk_get_optional(&client->dev, NULL);
- if (IS_ERR(phy->clk))
- return dev_err_probe(&client->dev, PTR_ERR(phy->clk),
- "failed to get clock\n");
-
/*
* S3FWRN5 depends on a clock input ("XI" pin) to function properly.
* Depending on the hardware configuration this could be an always-on
* oscillator or some external clock that must be explicitly enabled.
* Make sure the clock is running before starting S3FWRN5.
*/
- ret = clk_prepare_enable(phy->clk);
- if (ret < 0) {
- dev_err(&client->dev, "failed to enable clock: %d\n", ret);
- return ret;
- }
+ phy->clk = devm_clk_get_optional_enabled(&client->dev, NULL);
+ if (IS_ERR(phy->clk))
+ return dev_err_probe(&client->dev, PTR_ERR(phy->clk),
+ "failed to get clock\n");
ret = s3fwrn5_probe(&phy->common.ndev, phy, &phy->i2c_dev->dev,
&i2c_phy_ops);
if (ret < 0)
- goto disable_clk;
+ return ret;
ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL,
s3fwrn5_i2c_irq_thread_fn, IRQF_ONESHOT,
@@ -241,8 +235,6 @@ static int s3fwrn5_i2c_probe(struct i2c_client *client,
s3fwrn5_remove:
s3fwrn5_remove(phy->common.ndev);
-disable_clk:
- clk_disable_unprepare(phy->clk);
return ret;
}
@@ -251,7 +243,6 @@ static void s3fwrn5_i2c_remove(struct i2c_client *client)
struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client);
s3fwrn5_remove(phy->common.ndev);
- clk_disable_unprepare(phy->clk);
}
static const struct i2c_device_id s3fwrn5_i2c_id_table[] = {
--
2.30.9