drm/msm/dpu: add support for alpha blending properties

Add support for alpha blending properties. Setup the plane blend state
according to those properties.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210628191958.2754731-1-dmitry.baryshkov@linaro.orgSigned-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>

drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c

@@ -30,12 +30,6 @@
 #include "dpu_core_perf.h"
 #include "dpu_trace.h"
 
-#define DPU_DRM_BLEND_OP_NOT_DEFINED    0
-#define DPU_DRM_BLEND_OP_OPAQUE         1
-#define DPU_DRM_BLEND_OP_PREMULTIPLIED  2
-#define DPU_DRM_BLEND_OP_COVERAGE       3
-#define DPU_DRM_BLEND_OP_MAX            4
-
 /* layer mixer index on dpu_crtc */
 #define LEFT_MIXER 0
 #define RIGHT_MIXER 1
@@ -146,20 +140,43 @@ static void _dpu_crtc_setup_blend_cfg(struct dpu_crtc_mixer *mixer,
 {
 	struct dpu_hw_mixer *lm = mixer->hw_lm;
 	uint32_t blend_op;
+	uint32_t fg_alpha, bg_alpha;
+
+	fg_alpha = pstate->base.alpha >> 8;
+	bg_alpha = 0xff - fg_alpha;
 
 	/* default to opaque blending */
+	if (pstate->base.pixel_blend_mode == DRM_MODE_BLEND_PIXEL_NONE ||
+	    !format->alpha_enable) {
 		blend_op = DPU_BLEND_FG_ALPHA_FG_CONST |
 			DPU_BLEND_BG_ALPHA_BG_CONST;
-
-	if (format->alpha_enable) {
+	} else if (pstate->base.pixel_blend_mode == DRM_MODE_BLEND_PREMULTI) {
+		blend_op = DPU_BLEND_FG_ALPHA_FG_CONST |
+			DPU_BLEND_BG_ALPHA_FG_PIXEL;
+		if (fg_alpha != 0xff) {
+			bg_alpha = fg_alpha;
+			blend_op |= DPU_BLEND_BG_MOD_ALPHA |
+				    DPU_BLEND_BG_INV_MOD_ALPHA;
+		} else {
+			blend_op |= DPU_BLEND_BG_INV_ALPHA;
+		}
+	} else {
 		/* coverage blending */
 		blend_op = DPU_BLEND_FG_ALPHA_FG_PIXEL |
-			DPU_BLEND_BG_ALPHA_FG_PIXEL |
-			DPU_BLEND_BG_INV_ALPHA;
+			DPU_BLEND_BG_ALPHA_FG_PIXEL;
+		if (fg_alpha != 0xff) {
+			bg_alpha = fg_alpha;
+			blend_op |= DPU_BLEND_FG_MOD_ALPHA |
+				    DPU_BLEND_FG_INV_MOD_ALPHA |
+				    DPU_BLEND_BG_MOD_ALPHA |
+				    DPU_BLEND_BG_INV_MOD_ALPHA;
+		} else {
+			blend_op |= DPU_BLEND_BG_INV_ALPHA;
+		}
 	}
 
 	lm->ops.setup_blend_config(lm, pstate->stage,
-				0xFF, 0, blend_op);
+				fg_alpha, bg_alpha, blend_op);
 
 	DRM_DEBUG_ATOMIC("format:%p4cc, alpha_en:%u blend_op:0x%x\n",
 		  &format->base.pixel_format, format->alpha_enable, blend_op);

drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c

@@ -1339,9 +1339,7 @@ static void dpu_plane_reset(struct drm_plane *plane)
 		return;
 	}
 
-	pstate->base.plane = plane;
-
-	plane->state = &pstate->base;
+	__drm_atomic_helper_plane_reset(plane, &pstate->base);
 }
 
 #ifdef CONFIG_DEBUG_FS
@@ -1647,6 +1645,12 @@ struct drm_plane *dpu_plane_init(struct drm_device *dev,
 	if (ret)
 		DPU_ERROR("failed to install zpos property, rc = %d\n", ret);
 
+	drm_plane_create_alpha_property(plane);
+	drm_plane_create_blend_mode_property(plane,
+			BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+			BIT(DRM_MODE_BLEND_PREMULTI) |
+			BIT(DRM_MODE_BLEND_COVERAGE));
+
 	drm_plane_create_rotation_property(plane,
 			DRM_MODE_ROTATE_0,
 			DRM_MODE_ROTATE_0 |