Commit f994d9dc authored by Jay Freyensee's avatar Jay Freyensee Committed by Sagi Grimberg

fabrics: define admin sqsize min default, per spec

Upon admin queue connect(), the rdma qp was being
set based on NVMF_AQ_DEPTH.  However, the fabrics layer was
using the sqsize field value set for I/O queues for the admin
queue, which threw the nvme layer and rdma layer off-whack:

root@fedora23-fabrics-host1 nvmf]# dmesg
[ 3507.798642] nvme_fabrics: nvmf_connect_admin_queue():admin sqsize
being sent is: 128
[ 3507.798858] nvme nvme0: creating 16 I/O queues.
[ 3507.896407] nvme nvme0: new ctrl: NQN "nullside-nqn", addr
192.168.1.3:4420

Thus, to have a different admin queue value, we use
NVMF_AQ_DEPTH for connect() and RDMA private data
as the minimum depth specified in the NVMe-over-Fabrics 1.0 spec
(and in that RDMA private data we treat hrqsize as 1's-based
value, per current understanding of the fabrics spec).
Reported-by: default avatarDaniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: default avatarJay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: default avatarDaniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: default avatarSagi Grimberg <sagi@grimberg.me>
parent b825b44c
......@@ -363,7 +363,14 @@ int nvmf_connect_admin_queue(struct nvme_ctrl *ctrl)
cmd.connect.opcode = nvme_fabrics_command;
cmd.connect.fctype = nvme_fabrics_type_connect;
cmd.connect.qid = 0;
cmd.connect.sqsize = cpu_to_le16(ctrl->sqsize);
/*
* fabrics spec sets a minimum of depth 32 for admin queue,
* so set the queue with this depth always until
* justification otherwise.
*/
cmd.connect.sqsize = cpu_to_le16(NVMF_AQ_DEPTH - 1);
/*
* Set keep-alive timeout in seconds granularity (ms * 1000)
* and add a grace period for controller kato enforcement
......
......@@ -1278,8 +1278,17 @@ static int nvme_rdma_route_resolved(struct nvme_rdma_queue *queue)
priv.recfmt = cpu_to_le16(NVME_RDMA_CM_FMT_1_0);
priv.qid = cpu_to_le16(nvme_rdma_queue_idx(queue));
priv.hrqsize = cpu_to_le16(queue->queue_size);
priv.hsqsize = cpu_to_le16(queue->queue_size);
/*
* set the admin queue depth to the minimum size
* specified by the Fabrics standard.
*/
if (priv.qid == 0) {
priv.hrqsize = cpu_to_le16(NVMF_AQ_DEPTH);
priv.hsqsize = cpu_to_le16(NVMF_AQ_DEPTH - 1);
} else {
priv.hrqsize = cpu_to_le16(queue->queue_size);
priv.hsqsize = cpu_to_le16(queue->queue_size);
}
ret = rdma_connect(queue->cm_id, &param);
if (ret) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment