Skip to content

L
linux
Commit f9a4581c authored by Tom Rini's avatar Tom Rini
Browse files
Options

Remove the Zynx 4500 platform code. It was old and unmaintained. 

This change can also be found in patch form at:
ftp://source.mvista.com/pub/linuxppc/obsolete/zx4500/
parent 989ff8b2
Hide whitespace changes
Inline Side-by-side
Showing with 2 additions and 1207 deletions
arch/ppc/Kconfig
View file @ f9a4581c
......@@ -490,9 +490,6 @@ config GEMINI
series Single Board Computer. More information is available at:
<http://www.synergymicro.com/PressRel/97_10_15.html>.
config ZX4500
bool "Zynx-ZX4500"
endchoice
config PPC_CHRP
......@@ -536,7 +533,7 @@ config WILLOW
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"
depends on FORCE || MENF1 || SANDPOINT || ZX4500
depends on FORCE || MENF1 || SANDPOINT
config GT64260
bool
......@@ -1528,7 +1525,7 @@ config BOOTX_TEXT
config SERIAL_TEXT_DEBUG
bool "Support for early boot texts over serial port"
depends on 4xx || GT64260 || LOPEC || MCPN765 || PPLUS || PRPMC800 || SANDPOINT || ZX4500
depends on 4xx || GT64260 || LOPEC || MCPN765 || PPLUS || PRPMC800 || SANDPOINT
config OCP
bool
......
arch/ppc/boot/simple/Makefile
View file @ f9a4581c
......@@ -101,12 +101,6 @@ ENTRYPOINT := 0x00800000
MISC := misc-spruce.o
TFTPIMAGE := /tftpboot/zImage.$(END)
endif
ifeq ($(CONFIG_ZX4500),y)
ZIMAGE := zImage-STRIPELF
ZIMAGEINITRD := zImage.initrd-STRIPELF
END := zx4500
TFTPIMAGE := /tftpboot/zImage.$(END)
endif
ifeq ($(CONFIG_SMP),y)
TFTPIMAGE += .smp
endif
......
arch/ppc/configs/adir_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_ADIR=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_ALTIVEC is not set
......
arch/ppc/configs/apus_defconfig
View file @ f9a4581c
......@@ -68,7 +68,6 @@ CONFIG_APUS=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_ALTIVEC is not set
......
arch/ppc/configs/common_defconfig
View file @ f9a4581c
......@@ -68,7 +68,6 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
CONFIG_PPC_CHRP=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PREP=y
......
arch/ppc/configs/ev64260_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_EV64260=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
CONFIG_GT64260=y
CONFIG_SERIAL_CONSOLE_BAUD=115200
# CONFIG_SMP is not set
......
arch/ppc/configs/gemini_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_PPC_STD_MMU=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
CONFIG_GEMINI=y
# CONFIG_ZX4500 is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_ALTIVEC=y
......
arch/ppc/configs/ibmchrp_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
CONFIG_PPC_CHRP=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PREP=y
......
arch/ppc/configs/k2_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_PPC_STD_MMU=y
CONFIG_K2=y
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
# CONFIG_CPC710_DATA_GATHERING is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
......
arch/ppc/configs/lopec_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_LOPEC=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
CONFIG_EPIC_SERIAL_MODE=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
......
arch/ppc/configs/mcpn765_defconfig
View file @ f9a4581c
......@@ -62,7 +62,6 @@ CONFIG_MCPN765=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_ALTIVEC=y
......
arch/ppc/configs/menf1_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_MENF1=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
CONFIG_MPC10X_STORE_GATHERING=y
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
......
arch/ppc/configs/mvme5100_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_MVME5100=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
# CONFIG_MVME5100_IPMC761_PRESENT is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
......
arch/ppc/configs/pcore_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_PCORE=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
CONFIG_FORCE=y
# CONFIG_MPC10X_STORE_GATHERING is not set
# CONFIG_SMP is not set
......
arch/ppc/configs/pmac_defconfig
View file @ f9a4581c
......@@ -69,7 +69,6 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
CONFIG_PPC_CHRP=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PREP=y
......
arch/ppc/configs/power3_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
CONFIG_PPC_CHRP=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PREP=y
......
arch/ppc/configs/pplus_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_PPLUS=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_ALTIVEC is not set
......
arch/ppc/configs/prpmc750_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_PRPMC750=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_ALTIVEC is not set
......
arch/ppc/configs/prpmc800_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_PRPMC800=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_ALTIVEC is not set
......
arch/ppc/configs/sandpoint_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_SANDPOINT=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
CONFIG_SANDPOINT_X3=y
CONFIG_EPIC_SERIAL_MODE=y
# CONFIG_MPC10X_STORE_GATHERING is not set
......
arch/ppc/configs/spruce_defconfig
View file @ f9a4581c
......@@ -67,7 +67,6 @@ CONFIG_SPRUCE=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
# CONFIG_SPRUCE_BAUD_33M is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
......
arch/ppc/configs/zx4500_defconfig deleted 100644 → 0
View file @ 989ff8b2
#
# Automatically generated make config: don't edit
#
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HAVE_DEC_LOCK=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EMBEDDED=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
#
# Platform support
#
CONFIG_PPC=y
CONFIG_PPC32=y
CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_POWER3 is not set
# CONFIG_8xx is not set
#
# IBM 4xx options
#
# CONFIG_8260 is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_STD_MMU=y
# CONFIG_PPC_MULTIPLATFORM is not set
# CONFIG_APUS is not set
# CONFIG_WILLOW_2 is not set
# CONFIG_PCORE is not set
# CONFIG_POWERPMC250 is not set
# CONFIG_EV64260 is not set
# CONFIG_SPRUCE is not set
# CONFIG_MENF1 is not set
# CONFIG_LOPEC is not set
# CONFIG_MCPN765 is not set
# CONFIG_MVME5100 is not set
# CONFIG_PPLUS is not set
# CONFIG_PRPMC750 is not set
# CONFIG_PRPMC800 is not set
# CONFIG_SANDPOINT is not set
# CONFIG_ADIR is not set
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
CONFIG_ZX4500=y
# CONFIG_MPC10X_STORE_GATHERING is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
# CONFIG_ALTIVEC is not set
# CONFIG_TAU is not set
# CONFIG_CPU_FREQ is not set
#
# General setup
#
# CONFIG_HIGHMEM is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
CONFIG_BINFMT_MISC=y
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_PCI_NAMES=y
# CONFIG_HOTPLUG is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
CONFIG_PPC601_SYNC_FIX=y
# CONFIG_CMDLINE_BOOL is not set
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_BOOT_LOAD=0x00800000
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_INITRD=y
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# ATA/IDE/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI support
#
# CONFIG_SCSI is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_IPV6 is not set
# CONFIG_XFRM_USER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_OAKNET is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Token Ring devices (depends on LLC=y)
#
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set
#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set
#
# ISDN subsystem
#
# CONFIG_ISDN_BOOL is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Userland interfaces
#
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_SERIO is not set
#
# Input Device Drivers
#
#
# Macintosh device drivers
#
#
# Character devices
#
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# I2C support
#
# CONFIG_I2C is not set
#
# I2C Hardware Sensors Mainboard support
#
#
# I2C Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_QIC02_TAPE is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_FAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_DEVFS_FS=y
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_GSS is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
# CONFIG_USB is not set
# CONFIG_USB_GADGET is not set
#
# Bluetooth support
#
# CONFIG_BT is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_KALLSYMS is not set
CONFIG_SERIAL_TEXT_DEBUG=y
#
# Security options
#
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
# CONFIG_CRYPTO is not set
arch/ppc/defconfig
View file @ f9a4581c
......@@ -68,7 +68,6 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_K2 is not set
# CONFIG_PAL4 is not set
# CONFIG_GEMINI is not set
# CONFIG_ZX4500 is not set
CONFIG_PPC_CHRP=y
CONFIG_PPC_PMAC=y
CONFIG_PPC_PREP=y
......
arch/ppc/platforms/Makefile
View file @ f9a4581c
......@@ -45,7 +45,6 @@ obj-$(CONFIG_PRPMC750) += prpmc750_setup.o prpmc750_pci.o
obj-$(CONFIG_PRPMC800) += prpmc800_setup.o prpmc800_pci.o
obj-$(CONFIG_SANDPOINT) += sandpoint_setup.o sandpoint_pci.o
obj-$(CONFIG_SPRUCE) += spruce_setup.o spruce_pci.o
obj-$(CONFIG_ZX4500) += zx4500_setup.o zx4500_pci.o
ifeq ($(CONFIG_SMP),y)
obj-$(CONFIG_PPC_PMAC) += pmac_smp.o
......
arch/ppc/platforms/zx4500.h deleted 100644 → 0
View file @ 989ff8b2
/* * arch/ppc/platforms/zx4500.h
*
* Board setup routines for Znyx ZX4500 cPCI board.
*
* Author: Mark A. Greer
* mgreer@mvista.com
*
* 2000-2001 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __PPC_PLATFORMS_ZX4500_H_
#define __PPC_PLATFORMS_ZX4500_H_
/*
* Define the addresses of CPLD registers in CLPD area.
*/
#define ZX4500_CPLD_BOARD_ID 0xff800001
#define ZX4500_CPLD_REV 0xff800002
#define ZX4500_CPLD_RESET 0xff800011
#define ZX4500_CPLD_PHY1 0xff800014
#define ZX4500_CPLD_PHY2 0xff800015
#define ZX4500_CPLD_PHY3 0xff800016
#define ZX4500_CPLD_SYSCTL 0xff800017
#define ZX4500_CPLD_EXT_FLASH 0xff800018
#define ZX4500_CPLD_DUAL1 0xff800019
#define ZX4500_CPLD_DUAL2 0xff80001A
#define ZX4500_CPLD_STATUS 0xff800030
#define ZX4500_CPLD_STREAM 0xff800032
#define ZX4500_CPLD_PHY1_LED 0xff800034
#define ZX4500_CPLD_PHY2_LED 0xff800035
#define ZX4500_CPLD_PHY3_LED 0xff800036
#define ZX4500_CPLD_PHY1_LNK 0xff80003C
#define ZX4500_CPLD_PHY2_LNK 0xff80003D
#define ZX4500_CPLD_PHY3_LNK 0xff80003E
#define ZX4500_CPLD_RESET_SOFT 0x01 /* Soft Reset */
#define ZX4500_CPLD_RESET_XBUS 0x40 /* Reset entire board */
#define ZX4500_CPLD_SYSCTL_PMC 0x01 /* Enable INTA/B/C/D from PMC */
#define ZX4500_CPLD_SYSCTL_BCM 0x04 /* Enable INTA from BCM */
#define ZX4500_CPLD_SYSCTL_SINTA 0x08 /* Enable SINTA from 21554 */
#define ZX4500_CPLD_SYSCTL_WD 0x20 /* Enable Watchdog Timer */
#define ZX4500_CPLD_SYSCTL_PMC_TRI 0x80 /* Tri-state PMC EREADY */
#define ZX4500_CPLD_DUAL2_LED_PULL 0x01 /* Pull LED */
#define ZX4500_CPLD_DUAL2_LED_EXT_FAULT 0x02 /* External Fault LED */
#define ZX4500_CPLD_DUAL2_LED_INT_FAULT 0x04 /* Internal Fault LED */
#define ZX4500_CPLD_DUAL2_LED_OK 0x08 /* OK LED */
#define ZX4500_CPLD_DUAL2_LED_CLK 0x10 /* CLK LED */
/*
* Defines related to boot string stored in flash.
*/
#define ZX4500_BOOT_STRING_ADDR 0xfff7f000
#define ZX4500_BOOT_STRING_LEN 80
/*
* Define the IDSEL that the PCI bus side of the 8240 is connected to.
* This IDSEL must not be selected from the 8240 processor side.
*/
#define ZX4500_HOST_BRIDGE_IDSEL 20
void zx4500_find_bridges(void);
#endif /* __PPC_PLATFORMS_ZX4500_H_ */
arch/ppc/platforms/zx4500_pci.c deleted 100644 → 0
View file @ 989ff8b2
/*
* arch/ppc/platforms/zx4500_pci.c
*
* PCI setup routines for Znyx ZX4500 cPCI boards.
*
* Author: Mark A. Greer
* mgreer@mvista.com
*
* 2000-2001 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <asm/machdep.h>
#include <asm/mpc10x.h>
#include <asm/pci-bridge.h>
#include "zx4500.h"
/*
* Znyx ZX4500 interrupt routes.
*/
static inline int
zx4500_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{ 19, 0, 0, 0 }, /* IDSEL 21 - 21554 PCI-cPCI bridge */
{ 18, 0, 0, 0 }, /* IDSEL 22 - BCM5600 INTA */
{ 16, 20, 16, 20 }, /* IDSEL 23 - PPMC Slot */
};
const long min_idsel = 21, max_idsel = 23, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
void __init
zx4500_board_init(struct pci_controller *hose)
{
uint val;
u_char sysctl;
/*
* CPLD Registers are mapped in by BAT 3 in zx4500_setup_arch().
*
* Turn off all interrupts routed through the CPLD.
* Also, turn off watchdog timer and drive PMC EREADY low.
*/
sysctl = in_8((volatile u_char *)ZX4500_CPLD_SYSCTL);
sysctl &= ~(ZX4500_CPLD_SYSCTL_PMC |
ZX4500_CPLD_SYSCTL_BCM |
ZX4500_CPLD_SYSCTL_SINTA |
ZX4500_CPLD_SYSCTL_WD |
ZX4500_CPLD_SYSCTL_PMC_TRI);
out_8((volatile u_char *)ZX4500_CPLD_SYSCTL, sysctl);
/*
* Kludge the size that BAR2 of the 21554 asks for
* (i.e., set Upstream I/O or Memory 0 Setup Register).
* Old versions of SROM wants 1 GB which is too large, make it ask
* for 256 MB.
*/
early_read_config_dword(hose, 0, PCI_DEVFN(21,0), 0xc4, &val);
if (val != 0) {
early_write_config_dword(hose,
0,
PCI_DEVFN(21,0),
0xc4,
val | 0xf0000000);
}
return;
}
static int
zx4500_exclude_device(u_char bus, u_char devfn)
{
if ((bus == 0) && (PCI_SLOT(devfn) == ZX4500_HOST_BRIDGE_IDSEL)) {
return PCIBIOS_DEVICE_NOT_FOUND;
}
else {
return PCIBIOS_SUCCESSFUL;
}
}
void __init
zx4500_find_bridges(void)
{
struct pci_controller *hose;
hose = pcibios_alloc_controller();
if (!hose)
return;
hose->first_busno = 0;
hose->last_busno = 0xff;
if (mpc10x_bridge_init(hose,
MPC10X_MEM_MAP_B,
MPC10X_MEM_MAP_B,
MPC10X_MAPB_EUMB_BASE) == 0) {
hose->mem_resources[0].end = 0xffffffff;
/* Initialize the board */
zx4500_board_init(hose);
/* scan PCI bus */
ppc_md.pci_exclude_device = zx4500_exclude_device;
hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
ppc_md.pcibios_fixup = NULL;
ppc_md.pcibios_fixup_bus = NULL;
ppc_md.pci_swizzle = common_swizzle;
ppc_md.pci_map_irq = zx4500_map_irq;
}
else {
if (ppc_md.progress)
ppc_md.progress("Bridge init failed", 0x100);
printk("Host bridge init failed\n");
}
return;
}
arch/ppc/platforms/zx4500_serial.h deleted 100644 → 0
View file @ 989ff8b2
/*
* arch/ppc/platforms/zx4500_serial.h
*
* Definitions for Znyx ZX4500 board support
*
* Author: Mark A. Greer
* mgreer@mvista.com
*
* 2000-2001 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#ifndef __ASMPPC_ZX4500_SERIAL_H
#define __ASMPPC_ZX4500_SERIAL_H
#include <linux/config.h>
/* Define the UART base address (only 1 UART) */
#define ZX4500_SERIAL_1 0xff880000
#ifdef CONFIG_SERIAL_MANY_PORTS
#define RS_TABLE_SIZE 64
#else
#define RS_TABLE_SIZE 1
#endif
/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
#define BASE_BAUD ( 1843200 / 16 )
#ifdef CONFIG_SERIAL_DETECT_IRQ
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
#else
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
#endif
#define STD_SERIAL_PORT_DFNS \
{ 0, BASE_BAUD, ZX4500_SERIAL_1, 17, STD_COM_FLAGS, /* ttyS0 */ \
iomem_base: (u8 *)ZX4500_SERIAL_1, \
io_type: SERIAL_IO_MEM },
#define SERIAL_PORT_DFNS \
STD_SERIAL_PORT_DFNS
#endif /* __ASMPPC_ZX4500_SERIAL_H */
arch/ppc/platforms/zx4500_setup.c deleted 100644 → 0
View file @ 989ff8b2
/*
* arch/ppc/platforms/zx4500_setup.c
*
* Board setup routines for Znyx ZX4500 family of cPCI boards.
*
* Author: Mark A. Greer
* mgreer@mvista.com
*
* 2000-2001 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
/*
* This file adds support for the Znyx ZX4500 series of cPCI boards.
* These boards have an 8240, UART on the processor bus, a PPMC slot (for now
* the card in this slot can _not_ be a monarch), Broadcom BCM5600, and an
* Intel 21554 bridge.
*
* Currently, this port assumes that the 8240 is the master and performs PCI
* arbitration, etc. It is also assumed that the 8240 is wired to come up
* using memory MAP B (CHRP map).
*
* Note: This board port will not work properly as it is. You must apply the
* patch that is at ftp://ftp.mvista.com/pub/Area51/zx4500/zx_patch_2_5
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/initrd.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/prom.h>
#include <asm/time.h>
#include <asm/open_pic.h>
#include <asm/mpc10x.h>
#include <asm/pci-bridge.h>
#include <asm/bootinfo.h>
#include "zx4500.h"
static u_char zx4500_openpic_initsenses[] __initdata = {
0, /* 0-15 are not used on an 8240 EPIC */
0, /* 1 */
0, /* 2 */
0, /* 3 */
0, /* 4 */
0, /* 5 */
0, /* 6 */
0, /* 7 */
0, /* 8 */
0, /* 9 */
0, /* 10 */
0, /* 11 */
0, /* 12 */
0, /* 13 */
0, /* 14 */
0, /* 15 */
1, /* 16: EPIC IRQ 0: Active Low -- PMC #INTA & #INTC */
1, /* 17: EPIC IRQ 1: Active Low -- UART */
1, /* 18: EPIC IRQ 2: Active Low -- BCM5600 #INTA */
1, /* 19: EPIC IRQ 3: Active Low -- 21554 #SINTA */
1, /* 20: EPIC IRQ 4: Active Low -- PMC #INTB & #INTD */
};
static void __init
zx4500_setup_arch(void)
{
char boot_string[ZX4500_BOOT_STRING_LEN + 1];
char *boot_arg;
extern char cmd_line[];
loops_per_jiffy = 50000000 / HZ;
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;
else
#endif
#if defined(CONFIG_ROOT_NFS)
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_SDA1;
#endif
/* Get boot string from flash */
strlcpy(boot_string,
(char *)ZX4500_BOOT_STRING_ADDR,
sizeof(boot_string));
boot_string[ZX4500_BOOT_STRING_LEN] = '\0';
/* Can be delimited by 0xff */
boot_arg = strchr(boot_string, 0xff);
if (boot_arg != NULL) {
*boot_arg = '\0';
}
/* First 3 chars must be 'dev'. If not, ignore. */
if (!strncmp(boot_string, "dev", 3)) {
/* skip 'dev?' and any blanks after it */
boot_arg = strchr(boot_string, ' ');
if (boot_arg != NULL) {
while (*boot_arg == ' ') boot_arg++;
strcat(cmd_line, " ");
strcat(cmd_line, boot_arg);
}
}
/* nothing but serial consoles... */
printk("Znyx ZX4500 Series High Performance Switch\n");
printk("ZX4500 port (C) 2000, 2001 MontaVista Software, Inc. (source@mvista.com)\n");
/* Lookup PCI host bridge */
zx4500_find_bridges();
printk("ZX4500 Board ID: 0x%x, Revision #: 0x%x\n",
in_8((volatile u_char *)ZX4500_CPLD_BOARD_ID),
in_8((volatile u_char *)ZX4500_CPLD_REV));
return;
}
static ulong __init
zx4500_find_end_of_memory(void)
{
return mpc10x_get_mem_size(MPC10X_MEM_MAP_B);
}
static void __init
zx4500_map_io(void)
{
io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
}
/*
* Enable interrupts routed thru CPLD to reach the 8240's EPIC.
* Need to enable all 4 PMC intrs, BCM INTA, and 21554 SINTA to 8240.
* UART intrs routed directly to 8240 (not thru CPLD).
*/
static void __init
zx4500_enable_cpld_intrs(void)
{
u_char sysctl;
sysctl = in_8((volatile u_char *)ZX4500_CPLD_SYSCTL);
sysctl |= (ZX4500_CPLD_SYSCTL_PMC |
ZX4500_CPLD_SYSCTL_BCM |
ZX4500_CPLD_SYSCTL_SINTA);
out_8((volatile u_char *)ZX4500_CPLD_SYSCTL, sysctl);
return;
}
static void __init
zx4500_init_IRQ(void)
{
OpenPIC_InitSenses = zx4500_openpic_initsenses;
OpenPIC_NumInitSenses = sizeof(zx4500_openpic_initsenses);
openpic_init(1, 0, NULL, -1);
zx4500_enable_cpld_intrs(); /* Allow CPLD to route intrs to 8240 */
return;
}
static void
zx4500_restart(char *cmd)
{
local_irq_disable();
out_8((volatile u_char *)ZX4500_CPLD_RESET, ZX4500_CPLD_RESET_XBUS);
for (;;);
panic("Restart failed.\n");
/* NOTREACHED */
}
static void
zx4500_power_off(void)
{
local_irq_disable();
for(;;); /* No way to shut power off with software */
/* NOTREACHED */
}
static void
zx4500_halt(void)
{
zx4500_power_off();
/* NOTREACHED */
}
static int
zx4500_get_bus_speed(void)
{
int bus_speed;
bus_speed = 100000000;
return bus_speed;
}
static int
zx4500_show_cpuinfo(struct seq_file *m)
{
uint pvid;
seq_printf(m, "vendor\t\t: Znyx\n");
seq_printf(m, "machine\t\t: ZX4500\n");
seq_printf(m, "processor\t: PVID: 0x%x, vendor: %s\n",
pvid, (pvid & (1<<15) ? "IBM" : "Motorola"));
seq_printf(m, "bus speed\t: %dMhz\n",
zx4500_get_bus_speed()/1000000);
return 0;
}
static void __init
zx4500_calibrate_decr(void)
{
ulong freq;
freq = zx4500_get_bus_speed() / 4;
printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
freq/1000000, freq%1000000);
tb_ticks_per_jiffy = freq / HZ;
tb_to_us = mulhwu_scale_factor(freq, 1000000);
return;
}
/*
* Set BAT 3 to map 0xf0000000 to end of physical memory space 1-1.
*/
static __inline__ void
zx4500_set_bat(void)
{
unsigned long bat3u, bat3l;
static int mapping_set = 0;
if (!mapping_set) {
__asm__ __volatile__(
" lis %0,0xf800\n \
ori %1,%0,0x002a\n \
ori %0,%0,0x0ffe\n \
mtspr 0x21e,%0\n \
mtspr 0x21f,%1\n \
isync\n \
sync "
: "=r" (bat3u), "=r" (bat3l));
mapping_set = 1;
}
return;
}
#ifdef CONFIG_SERIAL_TEXT_DEBUG
#include <linux/serialP.h>
#include <linux/serial_reg.h>
#include <asm/serial.h>
static struct serial_state rs_table[RS_TABLE_SIZE] = {
SERIAL_PORT_DFNS /* Defined in <asm/serial.h> */
};
void
zx4500_progress(char *s, unsigned short hex)
{
volatile char c;
volatile unsigned long com_port;
u16 shift;
com_port = rs_table[0].port;
shift = rs_table[0].iomem_reg_shift;
while ((c = *s++) != 0) {
while ((*((volatile unsigned char *)com_port +
(UART_LSR << shift)) & UART_LSR_THRE) == 0)
;
*(volatile unsigned char *)com_port = c;
if (c == '\n') {
while ((*((volatile unsigned char *)com_port +
(UART_LSR << shift)) & UART_LSR_THRE) == 0)
;
*(volatile unsigned char *)com_port = '\r';
}
}
}
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
void __init
platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
unsigned long r6, unsigned long r7)
{
parse_bootinfo(find_bootinfo());
/* Map in board registers, etc. */
zx4500_set_bat();
isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
ppc_md.setup_arch = zx4500_setup_arch;
ppc_md.show_cpuinfo = zx4500_show_cpuinfo;
ppc_md.irq_canonicalize = NULL;
ppc_md.init_IRQ = zx4500_init_IRQ;
ppc_md.get_irq = openpic_get_irq;
ppc_md.init = NULL;
ppc_md.restart = zx4500_restart;
ppc_md.power_off = zx4500_power_off;
ppc_md.halt = zx4500_halt;
ppc_md.find_end_of_memory = zx4500_find_end_of_memory;
ppc_md.setup_io_mappings = zx4500_map_io;
ppc_md.calibrate_decr = zx4500_calibrate_decr;
ppc_md.heartbeat = NULL;
ppc_md.heartbeat_reset = 0;
ppc_md.heartbeat_count = 0;
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = zx4500_progress;
#else /* !CONFIG_SERIAL_TEXT_DEBUG */
ppc_md.progress = NULL;
#endif /* CONFIG_SERIAL_TEXT_DEBUG */
return;
}
arch/ppc/syslib/Makefile
View file @ f9a4581c
......@@ -61,8 +61,6 @@ obj-$(CONFIG_SANDPOINT) += i8259.o open_pic.o mpc10x_common.o \
pci_auto.o indirect_pci.o todc_time.o
obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \
todc_time.o
obj-$(CONFIG_ZX4500) += indirect_pci.o pci_auto.o mpc10x_common.o \
i8259.o open_pic.o
obj-$(CONFIG_8260) += m8260_setup.o ppc8260_pic.o
obj-$(CONFIG_BOOTX_TEXT) += btext.o
include/asm-ppc/serial.h
View file @ f9a4581c
......@@ -28,8 +28,6 @@
#include <platforms/sandpoint_serial.h>
#elif defined(CONFIG_SPRUCE)
#include <platforms/spruce_serial.h>
#elif defined(CONFIG_ZX4500)
#include <platforms/zx4500_serial.h>
#elif defined(CONFIG_40x)
#include <asm/ibm4xx.h>
#else
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7