drm/i915/psr: Only allow PSR in LPSP mode on HSW non-ULT

On HSW non-ULT (or at least on Dell Latitude E6540) external displays
start to flicker when we enable PSR on the eDP. We observe a much higher
SR and PC6 residency than should be possible with an external display,
and indeen much higher than what we observe with eDP disabled and
only the external display enabled. Looks like the hardware is somehow
ignoring the fact that the external display is active during PSR.

I wasn't able to redproduce this on my HSW ULT machine, or BDW.
So either there's something specific about this particular laptop
(eg. some unknown firmware thing) or the issue is limited to just
non-ULT HSW systems. All known registers that could affect this
look perfectly reasonable on the affected machine.

As a workaround let's unmask the LPSP event to prevent PSR entry
except while in LPSP mode (only pipe A + eDP active). This
will prevent PSR entry entirely when multiple pipes are active.
The one slight downside is that we now also prevent PSR entry
when driving eDP with pipe B or C, but I think that's a reasonable
tradeoff to avoid having to implement a more complex workaround.

Cc: stable@vger.kernel.org
Fixes: 783d8b80 ("drm/i915/psr: Re-enable PSR1 on hsw/bdw")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10092Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240118212131.31868-1-ville.syrjala@linux.intel.comReviewed-by: Jouni Högander <jouni.hogander@intel.com>
(cherry picked from commit 94501c3c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drivers/gpu/drm/i915/display/intel_psr.c

@@ -1525,8 +1525,18 @@ static void intel_psr_enable_source(struct intel_dp *intel_dp,
 	 * can rely on frontbuffer tracking.
 	 */
 	mask = EDP_PSR_DEBUG_MASK_MEMUP |
-	       EDP_PSR_DEBUG_MASK_HPD |
-	       EDP_PSR_DEBUG_MASK_LPSP;
+	       EDP_PSR_DEBUG_MASK_HPD;
+
+	/*
+	 * For some unknown reason on HSW non-ULT (or at least on
+	 * Dell Latitude E6540) external displays start to flicker
+	 * when PSR is enabled on the eDP. SR/PC6 residency is much
+	 * higher than should be possible with an external display.
+	 * As a workaround leave LPSP unmasked to prevent PSR entry
+	 * when external displays are active.
+	 */
+	if (DISPLAY_VER(dev_priv) >= 8 || IS_HASWELL_ULT(dev_priv))
+		mask |= EDP_PSR_DEBUG_MASK_LPSP;
 
 	if (DISPLAY_VER(dev_priv) < 20)
 		mask |= EDP_PSR_DEBUG_MASK_MAX_SLEEP;